Improper Control of Generation of Code ('Code Injection') vulnerability in Johnson Controls Frick Controls Quantum HD allows Code Injection. Insufficient validation of input in certain parameters may permit unexpected actions, which could impact the security of the device before authentication occurs.This issue affects Frick Controls Quantum HD version 10.22 and prior.

Unauthenticated Remote Code Execution i.e Improper Control of Generation of Code ('Code Injection') vulnerability in Johnson Controls Frick Controls Quantum HD allows Code Injection. Insufficient validation of input in certain parameters may permit unexpected actions, which could impact the security of the device before authentication occurs.This issue affects Frick Controls Quantum HD version 10.22 and prior.

Under certain circumstances IQ Panel4 and IQ4 Hub panel software prior to version 4.4.2 could allow unauthorized access to settings.

An unauthorized user could access debug features in Quantum HD Unity products that were accidentally exposed.

Under certain circumstances the session token is not cleared on logout.

A vulnerability in versions 10.1 through 10.5 of Johnson Controls CEM Systems AC2000 allows a remote attacker to access to the system without adequate authorization. This issue affects: Johnson Controls CEM Systems AC2000 10.1; 10.2; 10.3; 10.4; 10.5.

Under certain configurations an unauthenticated remote user could be given access to credentials stored in the exacqVision Server.

An unauthorized user could gain account access to IQ Wifi 6 versions prior to 2.0.2 by conducting a brute force authentication attack.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Johnson Controls Frick Controls Quantum HD allows OS Command Injection. Insufficient validation of input in certain parameters may permit unexpected actions, which could impact the security of the device before authentication occurs.This issue affects Frick Controls Quantum HD version 10.22 and prior.

Unauthenticated Remote Code Execution and Information Disclosure due to Local File Inclusion (LFI) vulnerability in Johnson Controls Frick Controls Quantum HD allow an unauthenticated attacker to execute arbitrary code on the affected device, leading to full system compromise. This issue affects Frick Controls Quantum HD: Frick Controls Quantum HD version 10.22 and prior.

Hardcoded Email Credentials Saved as Plaintext in Firmware (CWE-256: Plaintext Storage of a Password) vulnerability in Frick Controls Quantum HD version 10.22 and prior lead to unauthorized access, exposure of sensitive information, and potential misuse or system compromise This issue affects Frick Controls Quantum HD version 10.22 and prior.

A vulnerability with the SmartService API Service option exists whereby an unauthorized user could potentially exploit this to upload malicious code to the server that could be executed at system level privileges. This affects Johnson Controls' Kantech EntraPass Corporate Edition versions 8.0 and prior; Kantech EntraPass Global Edition versions 8.0 and prior.

The iSTAR door controllers running firmware prior to version 6.6.B, does not support authenticated communications with ICU, which may allow an attacker to gain unauthorized access

An unauthenticated user could log into iSTAR Ultra, iSTAR Ultra LT, iSTAR Ultra G2, and iSTAR Edge G2 with administrator rights.

A debug feature in Sensormatic Electronics Illustra Pro Gen 4 Dome and PTZ cameras allows a user to compromise credentials after a long period of sustained attack.

All versions of iSTAR Ultra prior to version 6.8.9.CU01 are vulnerable to a command injection that could allow an unauthenticated user root access to the system.

Certain Stimulsoft GmbH products are affected by: Remote Code Execution. This affects Stimulsoft Designer (Desktop) 2023.1.4 and Stimulsoft Designer (Web) 2023.1.3 and Stimulsoft Viewer (Web) 2023.1.3. Access to the local file system is not prohibited in any way. Therefore, an attacker may include source code which reads or writes local directories and files. It is also possible for the attacker to prepare a report which has a variable that holds the gathered data and render it in the report.

Aqara Hub devices including Camera Hub G3 4.1.9_0027, Hub M2 4.3.6_0027, and Hub M3 4.3.6_0025 contain an undocumented remote access mechanism enabling unrestricted remote command execution.

Claude Code is an agentic coding tool. Prior to version 1.0.39, when running on a machine with Yarn 3.0 or above, Claude Code could have been tricked to execute code contained in a project via yarn plugins before the user accepted the startup trust dialog. Exploiting this would have required a user to start Claude Code in an untrusted directory and to be using Yarn 3.0 or above. This issue has been patched in version 1.0.39.

The npm module "shell-quote" 1.6.0 and earlier cannot correctly escape ">" and "<" operator used for redirection in shell. Applications that depend on shell-quote may also be vulnerable. A malicious user could perform code injection.

Insecure permissions in the scheduled tasks feature of MineAdmin v3.x allows attackers to execute arbitrary commands and execute a full account takeover.

ONTAP Select Deploy administration utility versions 2.11.2 through 2.12.2 are susceptible to a code injection vulnerability which when successfully exploited could allow an unauthenticated remote attacker to enable and use a privileged user account.

An issue in Open Source Kubectl MCP Server v1.1.1 allows attackers to execute arbitrary code on a victim system via user interaction with a crafted HTML page.

A template injection vulnerability in the /vip/v1/file/save component of ChanCMS v3.3.4 allows attackers to execute arbitrary code via a crafted POST request.

The WordPress File Upload plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 4.24.12 via the 'wfu_ABSPATH' cookie parameter. This makes it possible for unauthenticated attackers to execute code on the server.

xunruicms up to v4.5.1 was discovered to contain a remote code execution (RCE) vulnerability in /index.php. This vulnerability allows attackers to execute arbitrary code via a crafted GET request.

An issue was discovered in Mattermost Desktop App before 3.4.0. Strings could be executed as code via injection.

A vulnerability was found in openBI up to 1.0.8. It has been declared as critical. Affected by this vulnerability is the function index of the file /application/index/controller/Screen.php. The manipulation of the argument fileurl leads to code injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252475.

The WordPress File Upload plugin for WordPress is vulnerable to Remote Code Execution, Arbitrary File Read, and Arbitrary File Deletion in all versions up to, and including, 4.24.15 via the 'wfu_file_downloader.php' file. This is due to lack of proper sanitization of the 'source' parameter and allowing a user-defined directory path. This makes it possible for unauthenticated attackers to execute code on the server.

Possible Command injection Vulnerability in iManager has been discovered in OpenText™ iManager 3.2.4.0000.

An issue in Gaberiele Venturi pandasai v.0.8.0 and before allows a remote attacker to execute arbitrary code via a crafted request to the prompt function.

RCE (Remote Code Execution) vulnerability was found in some Furukawa ONU models, this vulnerability allows remote unauthenticated users to send arbitrary commands to the device via web interface.

IBM Planning Analytics 2.0.0 through 2.0.8 is vulnerable to a configuration overwrite that allows an unauthenticated user to login as "admin", and then execute code as root or SYSTEM via TM1 scripting. IBM X-Force ID: 172094.

Funadmin v3.2.0 was discovered to contain a remote code execution (RCE) vulnerability via the component \controller\Addon.php.

Remote command execution vulnerability in SE-elektronic GmbH E-DDC3.3 affecting versions 03.07.03 and higher. An attacker could send different commands from the operating system to the system via the web configuration functionality of the device.

remote code execution in paddlepaddle/paddle 2.6.0

Improper Control of Generation of Code ('Code Injection'), Improper Neutralization of Special Elements used in a Command ('Command Injection'), Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in BG-TEK Informatics Security Technologies CoslatV3 allows Command Injection, Privilege Escalation. This issue affects CoslatV3: through 3.1069. NOTE: The vendor was contacted and it was learned that the product is not supported.

An issue was discovered in the better-macro crate through 2021-07-22 for Rust. It intentionally demonstrates that remote attackers can execute arbitrary code via proc-macros, and otherwise has no legitimate purpose.

A vulnerability, which was classified as critical, was found in spider-flow 0.4.3. Affected is the function FunctionService.saveFunction of the file src/main/java/org/spiderflow/controller/FunctionController.java. The manipulation leads to code injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-249510 is the identifier assigned to this vulnerability.

A vulnerability, which was classified as critical, has been found in 个人开源 mldong 1.0. This issue affects the function ExpressionEngine of the file com/mldong/modules/wf/engine/model/DecisionModel.java. The manipulation leads to code injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-251561 was assigned to this vulnerability.

The Sneeit Framework plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 8.3 via the sneeit_articles_pagination_callback() function. This is due to the function accepting user input and then passing that through call_user_func(). This makes it possible for unauthenticated attackers to execute code on the server which can be leveraged to inject backdoors or, for example, create new administrative user accounts.

A vulnerability classified as problematic was found in rmountjoy92 DashMachine 0.5-4. Affected by this vulnerability is an unknown functionality of the file /settings/save_config of the component Config Handler. The manipulation of the argument value_template leads to code injection. The exploit has been disclosed to the public and may be used. The identifier VDB-248257 was assigned to this vulnerability.

A vulnerability was found in GetSimpleCMS 3.3.16/3.4.0a. It has been rated as critical. This issue affects some unknown processing of the file /admin/theme-edit.php. The manipulation leads to code injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-245735.

The Backup Migration plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 1.3.7 via the /includes/backup-heart.php file. This is due to an attacker being able to control the values passed to an include, and subsequently leverage that to achieve remote code execution. This makes it possible for unauthenticated attackers to easily execute code on the server.

A vulnerability was found in xnx3 wangmarket 6.1. It has been rated as critical. Affected by this issue is some unknown functionality of the component Role Management Page. The manipulation leads to code injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-248246 is the identifier assigned to this vulnerability.

Code Injection in GitHub repository salesagility/suitecrm prior to 7.14.2, 7.12.14, 8.4.2.

The Mock software contains a vulnerability wherein an attacker could potentially exploit privilege escalation, enabling the execution of arbitrary code with root user privileges. This weakness stems from the absence of proper sandboxing during the expansion and execution of Jinja2 templates, which may be included in certain configuration parameters. While the Mock documentation advises treating users added to the mock group as privileged, certain build systems invoking mock on behalf of users might inadvertently permit less privileged users to define configuration tags. These tags could then be passed as parameters to mock during execution, potentially leading to the utilization of Jinja2 templates for remote privilege escalation and the execution of arbitrary code as the root user on the build server.

An attacker is able to gain remote code execution on a server hosting the H2O dashboard through it's POJO model import feature.

The Syrus4 IoT gateway utilizes an unsecured MQTT server to download and execute arbitrary commands, allowing a remote unauthenticated attacker to execute code on any Syrus4 device connected to the cloud service. The MQTT server also leaks the location, video and diagnostic data from each connected device. An attacker who knows the IP address of the server is able to connect and perform the following operations: * Get location data of the vehicle the device is connected to * Send CAN bus messages via the ECU module ( https://syrus.digitalcomtech.com/docs/ecu-1 https://syrus.digitalcomtech.com/docs/ecu-1 ) * Immobilize the vehicle via the safe-immobilizer module ( https://syrus.digitalcomtech.com/docs/system-tools#safe-immobilization https://syrus.digitalcomtech.com/docs/system-tools#safe-immobilization ) * Get live video through the connected video camera * Send audio messages to the driver ( https://syrus.digitalcomtech.com/docs/system-tools#apx-tts https://syrus.digitalcomtech.com/docs/system-tools#apx-tts )

Knowage is an open source analytics and business intelligence suite. Versions 8.1.26 and below are vulnerable to Remote Code Exection through using an unsafe org.apache.commons.jxpath.JXPathContext in MetaService.java service. This issue is fixed in version 8.1.27.