SSH authenticated user when access the PAM server can execute an OS command to gain the full system access using bash. This issue affects Privileged Access Manager before 3.7.0.1.

Multiple vulnerabilities exist in the AOS-CX command line interface that could lead to authenticated command injection. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete switch compromise in ArubaOS-CX version(s): AOS-CX 10.09.xxxx: 10.09.1030 and below, AOS-CX 10.08.xxxx: 10.08.1030 and below, AOS-CX 10.06.xxxx: 10.06.0180 and below. Aruba has released upgrades for ArubaOS-CX Switch Devices that address these security vulnerabilities.

This issue was addressed with improved checks. This issue is fixed in macOS Mojave 10.14.4. A local user may be able to execute arbitrary shell commands.

Proxifier for Mac before 2.19.2, when first run, allows local users to gain privileges by replacing the KLoader binary with a Trojan horse program.

The QCMAP_CLI utility in the Qualcomm QCMAP software suite prior to versions released in October 2020 uses a system() call without validating the input, while handling a SetGatewayUrl() request. A local attacker with shell access can pass shell metacharacters and run arbitrary commands. If QCMAP_CLI can be run via sudo or setuid, this also allows elevating privileges to root. This version of QCMAP is used in many kinds of networking devices, primarily mobile hotspots and LTE routers.

Dell EMC PowerScale OneFS versions 8.1.0 - 9.1.0 contain an improper input validation vulnerability. A user with the ISI_PRIV_CLUSTER privilege may exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application.

Zoom Rooms for macOS clients before version 5.11.3 contain a local privilege escalation vulnerability. A local low-privileged user could exploit this vulnerability to escalate their privileges to root.

Arbitrary Command Injection in GitHub repository strapi/strapi prior to 4.1.0.

An authenticated shell command injection issue has been discovered in Raisecom ISCOM HT803G-U, HT803G-W, HT803G-1GE, and HT803G GPON products with the firmware version ISCOMHT803G-U_2.0.0_140521_R4.1.47.002 or below. The value of the fmgpon_loid parameter is used in a system call inside the boa binary. Because there is no user input validation, this leads to authenticated code execution on the device.

Dell PowerProtect DD, versions prior to 7.13.0.10, LTS 7.7.5.25, LTS 7.10.1.15, 6.2.1.110 contain an OS command injection vulnerability in the CLI. A local low privileged attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application. Exploitation may lead to a system take over by an attacker.

Dell PowerProtect DD , versions prior to 7.13.0.10, LTS 7.7.5.25, LTS 7.10.1.15, 6.2.1.110 contain an OS command injection vulnerability in administrator CLI. A local high privileged attacker could potentially exploit this vulnerability, to bypass security restrictions. Exploitation may lead to a system take over by an attacker

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The attacker would need to have Administrator privileges on the device. This vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

An unauthenticated Named Pipe channel in Controlup Real-Time Agent (cuAgent.exe) before 8.5 potentially allows an attacker to run OS commands via the ProcessActionRequest WCF method.

A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to overwrite and possibly corrupt files on an affected system. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting arbitrary commands that are executed as the root user account. A successful exploit could allow the attacker to overwrite arbitrary system files, which could result in a denial of service (DoS) condition.

An issue was discovered on Systrome Cumilon ISG-600C, ISG-600H, and ISG-800W devices with firmware V1.1-R2.1_TRUNK-20181105.bin. A shell command injection occurs by editing the description of an ISP file. The file network/isp/isp_update_edit.php does not properly validate user input, which leads to shell command injection via the des parameter.

NETGEAR R8000 devices before 1.0.4.76 are affected by command injection by an authenticated user.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects AC2100 before 1.2.0.88, AC2400 before 1.2.0.88, AC2600 before 1.2.0.88, D7000 before 1.0.1.82, R6220 before 1.1.0.110, R6230 before 1.1.0.110, R6260 before 1.1.0.84, R6330 before 1.1.0.84, R6350 before 1.1.0.84, R6700v2 before 1.2.0.88, R6800 before 1.2.0.88, R6850 before 1.1.0.84, R6900v2 before 1.2.0.88, R7200 before 1.2.0.88, R7350 before 1.2.0.88, R7400 before 1.2.0.88, and R7450 before 1.2.0.88.

An issue was discovered in Cobbler before 3.3.1. In the templar.py file, the function check_for_invalid_imports can allow Cheetah code to import Python modules via the "#from MODULE import" substring. (Only lines beginning with #import are blocked.)

A vulnerability was found in MailCleaner up to 2023.03.14. It has been declared as critical. This vulnerability affects the function getStats/Services_silentDump/Services_stopStartMTA/Config_saveDateTime/Config_hostid/Logs_StartGetStat/dumpConfiguration of the component SOAP Service. The manipulation leads to os command injection. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-262312.

Dell EMC Unity, Dell EMC UnityVSA and Dell EMC Unity XT versions prior to 5.1.2.0.5.007 contain an operating system (OS) command injection Vulnerability. A locally authenticated user with high privileges may potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the Unity underlying OS, with the privileges of the vulnerable application. Exploitation may lead to an elevation of privilege.

An issue was discovered in hwclock.13-v2.27 allows attackers to gain escalated privlidges or execute arbitrary commands via the path parameter when setting the date.

TensorFlow is an open source platform for machine learning. In affected versions TensorFlow's `saved_model_cli` tool is vulnerable to a code injection as it calls `eval` on user supplied strings. This can be used by attackers to run arbitrary code on the plaform where the CLI tool runs. However, given that the tool is always run manually, the impact of this is not severe. We have patched this by adding a `safe` flag which defaults to `True` and an explicit warning for users. The fix will be included in TensorFlow 2.7.0. We will also cherrypick this commit on TensorFlow 2.6.1, TensorFlow 2.5.2, and TensorFlow 2.4.4, as these are also affected and still in supported range.

cnMaestro is vulnerable to a local privilege escalation. By default, a user does not have root privileges. However, a user can run scripts as sudo, which could allow an attacker to gain root privileges when running user scripts outside allowed commands.

A command injection vulnerability in the protest binary allows an attacker with access to the remote command line interface to execute arbitrary commands as root.

The laser command injection vulnerability exists on AIS-BW80H-00 versions earlier than AIS-BW80H-00 9.0.3.4(H100SP13C00). The devices cannot effectively defend against external malicious interference. Attackers need the device to be visually exploitable and successful triggering of this vulnerability could execute voice commands on the device.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 version 03.02.02(14). At 0x1e3f0 the extracted dns value from the xml file is used as an argument to /etc/config-tools/edit_dns_server %s dns-server-nr=%d dns-server-name=<contents of dns node> using sprintf(). This command is later executed via a call to system(). This is done in a loop and there is no limit to how many dns entries will be parsed from the xml file.

An issue in Razer Synapse 3 v.3.9.131.20813 and Synapse 3 App v.20240213 allows a local attacker to execute arbitrary code via the export parameter of the Chroma Effects function in the Profiles component.

An arbitrary file creation vulnerability exists in PaperCut NG/MF that only affects Windows servers with Web Print enabled. This specific flaw exists within the image-handler process, which can incorrectly create files that don’t exist when a maliciously formed payload is provided. This can lead to local privilege escalation. Note: This CVE has been split into two (CVE-2024-4712 and CVE-2024-8405) and it’s been rescored with a "Privileges Required (PR)" rating of low, and “Attack Complexity (AC)” rating of low, reflecting the worst-case scenario where an Administrator has granted local login access to standard network users on the host server.

Dell Unity prior to 5.3 contains a Restricted Shell Bypass vulnerability. This could allow an authenticated, local attacker to exploit this vulnerability by authenticating to the device CLI and issuing certain commands.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e840 the extracted ntp value from the xml file is used as an argument to /etc/config-tools/config_sntp time-server-%d=<contents of ntp node> using sprintf(). This command is later executed via a call to system(). This is done in a loop and there is no limit to how many ntp entries will be parsed from the xml file.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1ea28 the extracted type value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=enabled config-type=<contents of type node> using sprintf(). This command is later executed via a call to system().

IBM DataPower Gateway 2018.4.1.0 through 2018.4.1.6, 7.6.0.0 through 7.6.0.15 and IBM MQ Appliance 8.0.0.0 through 8.0.0.12, 9.1.0.0 through 9.1.0.2, and 9.1.1 through 9.1.2 could allow a local attacker to execute arbitrary commands on the system, caused by a command injection vulnerability. IBM X-Force ID: 16188.

An exploitable command injection vulnerability exists in the /goform/WanParameterSetting functionality of Tenda AC9 Router AC1200 Smart Dual-Band Gigabit WiFi Route (AC9V1.0 Firmware V15.03.05.16multiTRU). A specially crafted HTTP POST request can cause a command injection in the DNS2 post parameters, resulting in code execution. An attacker can send HTTP POST request with command to trigger this vulnerability.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 version 03.02.02(14). An attacker can send a specially crafted XML cache file At 0x1e8a8 the extracted domainname value from the xml file is used as an argument to /etc/config-tools/edit_dns_server domain-name=<contents of domainname node> using sprintf().This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1e9fc the extracted subnetmask value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=enabled subnet-mask=<contents of subnetmask node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the /goform/WanParameterSetting functionality of Tenda AC9 Router AC1200 Smart Dual-Band Gigabit WiFi Route (AC9V1.0 Firmware V15.03.05.16multiTRU). A specially crafted HTTP POST request can cause a command injection in the DNS1 post parameters, resulting in code execution. An attacker can send HTTP POST request with command to trigger this vulnerability.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e9fc the extracted state value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=<contents of state node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1e87c the extracted hostname value from the xml file is used as an argument to /etc/config-tools/change_hostname hostname=<contents of hostname node> using sprintf(). This command is later executed via a call to system().

Improper neutralization of special elements used in an OS command in Druva inSync Windows Client 6.5.0 allows a local, unauthenticated attacker to execute arbitrary operating system commands with SYSTEM privileges.

Command injection vulnerability in Druva inSync 6.9.0 for MacOS, allows attackers to execute arbitrary commands via crafted payload to the local HTTP server due to un-sanitized call to the python os.system library.

Dell VNX2 for File version 8.1.21.266 and earlier, contain a privilege escalation vulnerability. A local malicious admin may potentially exploit vulnerability and gain elevated privileges.

D-Link router DSL-2750U with firmware vME1.16 or prior versions is vulnerable to OS command injection. An unauthenticated attacker on the local network may exploit this, with CVE-2021-3707, to execute any OS commands on the vulnerable device.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.66, EX2700 before 1.0.1.68, WN3000RPv2 before 1.0.0.90, WN3000RPv3 before 1.0.2.100, LBR1020 before 2.6.5.20, LBR20 before 2.6.5.32, R6700AX before 1.0.10.110, R7800 before 1.0.2.86, R8900 before 1.0.5.38, R9000 before 1.0.5.38, RAX10 before 1.0.10.110, RAX120v1 before 1.2.3.28, RAX120v2 before 1.2.3.28, RAX70 before 1.0.10.110, RAX78 before 1.0.10.110, XR450 before 2.3.2.130, XR500 before 2.3.2.130, and XR700 before 1.0.1.46.

Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker with a low-privileged account to elevate privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to gain access to the underlying root shell of an affected device and execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to gain access to the underlying root shell of an affected device and execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

A command injection vulnerability in the CGI program of the Zyxel VPN2S firmware version 1.12 could allow an authenticated, local user to execute arbitrary OS commands.

A vulnerability in the 'libsal.so' of the Zyxel GS1900 series firmware version 2.60 could allow an authenticated local user to execute arbitrary OS commands via a crafted function call.