Bitbucket Server and Bitbucket Data Center versions starting from version 3.0.0 before version 5.16.11, from version 6.0.0 before 6.0.11, from version 6.1.0 before 6.1.9, from version 6.2.0 before 6.2.7, from version 6.3.0 before 6.3.6, from version 6.4.0 before 6.4.4, from version 6.5.0 before 6.5.3, from version 6.6.0 before 6.6.3, from version 6.7.0 before 6.7.3, from version 6.8.0 before 6.8.2, and from version 6.9.0 before 6.9.1 had a Remote Code Execution vulnerability via certain user input fields. A remote attacker with user level permissions can exploit this vulnerability to run arbitrary commands on the victim's systems. Using a specially crafted payload as user input, the attacker can execute arbitrary commands on the victim's Bitbucket Server or Bitbucket Data Center instance.

An issue was discovered in Softing uaGate (SI, MB, 840D) firmware through 1.71.00.1225. A CGI script is vulnerable to command injection via a maliciously crafted form parameter.

An issue in NETIS SYSTEMS WF2409E v.3.6.42541 allows a remote attacker to execute arbitrary code via the ping and traceroute functions of the diagnostic tools component in the admin management interface.

Command injection vulnerability in ELECOM and LOGITEC wireless LAN routers allows a network-adjacent authenticated attacker to execute an arbitrary command by sending a specially crafted request to the web management page. Affected products and versions are as follows: WRC-1167GHBK3-A v1.24 and earlier, WRC-1167FEBK-A v1.18 and earlier, WRC-F1167ACF2 all versions, WRC-600GHBK-A all versions, WRC-733FEBK2-A all versions, WRC-1467GHBK-A all versions, WRC-1900GHBK-A all versions, and LAN-W301NR all versions.

A command injection vulnerability has been reported to affect QNAP NAS running QuTScloud, QuTS hero and QTS. If exploited, this vulnerability allows remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QuTScloud, QuTS hero and QTS: QuTScloud c5.0.1.1949 and later QuTS hero h5.0.0.1986 build 20220324 and later QTS 5.0.0.1986 build 20220324 and later

An OS command injection vulnerability has been reported to affect Video Station. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: Video Station 5.8.2 and later

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the modifyOne parameter in the enable_wsh function.

An OS command injection vulnerability has been reported to affect QuMagie. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: QuMagie 2.2.1 and later

An OS command injection vulnerability has been reported to affect Photo Station. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: Photo Station 6.4.2 ( 2023/12/15 ) and later

Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been rated as critical. Affected by this issue is the function verifyFacebookLike of the file /goform/verifyFacebookLike. The manipulation of the argument uid/accessToken leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered on D-Link DIR-818LW devices from 2.05.B03 to 2.06B01 BETA. There is a command injection in HNAP1 SetWanSettings via an XML injection of the value of the IPAddress key.

An authenticated command injection vulnerability exists in the AOS-CX command line interface. Successful exploitation of this vulnerability results in the ability to execute arbitrary commands on the underlying operating system as a privileged user on the affected switch. This allows an attacker to fully compromise the underlying operating system on the device running AOS-CX.

Command Injection vulnerability in goform/SetIPTVCfg interface of Tenda AC15 V15.03.05.20 allows remote attackers to run arbitrary commands via crafted POST request.

1Panel is an open source Linux server operation and maintenance management panel. Prior to version 1.3.6, an authenticated attacker can craft a malicious payload to achieve command injection when adding container repositories. The vulnerability has been fixed in v1.3.6.

An issue has been discovered in GitLab EE affecting all versions starting from 16.11 prior to 17.1.7, from 17.2 prior to 17.2.5, and from 17.3 prior to 17.3.2. Due to incomplete input filtering, it was possible to inject commands into a connected Cube server.

Azure Identity SDK Remote Code Execution Vulnerability

Atos Unify OpenScape 4000 Assistant V10 R1 before V10 R1.42.0 and V10 R1.34.8 and Manager V10 R1 before V10 R1.42.0 and V10 R1.34.8 allow command injection by authenticated users, aka OSFOURK-23554.

Atos Unify OpenScape 4000 Assistant V10 R1 before V10 R1.42.0 and V10 R1.34.8, Assistant V10 R0, Manager V10 R1 before V10 R1.42.0 and V10 R1.34.8, and Manager V10 R0 allow command injection by authenticated users, aka OSFOURK-23556.

Netgear D6220 with Firmware Version 1.0.0.80, D8500 with Firmware Version 1.0.3.60, R6700 with Firmware Version 1.0.2.26, and R6900 with Firmware Version 1.0.2.26 are vulnerable to Command Injection. If an attacker gains web management privileges, they can inject commands into the post request parameters, gaining shell privileges.

includes/configure_client.php in RaspAP 2.6.6 allows attackers to execute commands via command injection.

There is a command injection vulnerability in the Tenda G103 Gigabit GPON Terminal with firmware version V1.0.0.5. If an attacker gains web management privileges, they can inject commands gaining shell privileges.

TP-Link TL-WR940N V2/V4, TL-WR841N V8/V10, and TL-WR740N V1/V2 was discovered to contain a command injection vulnerability via the component /userRpm/WlanNetworkRpm .

Commands can be injected over the network and executed without authentication.

TP-Link TL-WPA4530 KIT V2 (EU)_170406 and V2 (EU)_161115 is vulnerable to Command Injection via _httpRpmPlcDeviceAdd.

Hanwha IP Camera ANE-L7012R 1.41.01 is vulnerable to Command Injection due to improper sanitization of special characters for the NAS storage test function.

** UNSUPPORTED WHEN ASSIGNED ** The Apache Spark UI offers the possibility to enable ACLs via the configuration option spark.acls.enable. With an authentication filter, this checks whether a user has access permissions to view or modify the application. If ACLs are enabled, a code path in HttpSecurityFilter can allow someone to perform impersonation by providing an arbitrary user name. A malicious user might then be able to reach a permission check function that will ultimately build a Unix shell command based on their input, and execute it. This will result in arbitrary shell command execution as the user Spark is currently running as. This issue was disclosed earlier as CVE-2022-33891, but incorrectly claimed version 3.1.3 (which has since gone EOL) would not be affected. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. Users are recommended to upgrade to a supported version of Apache Spark, such as version 3.4.0.

Motorola CX2L Router 1.0.1 was discovered to contain a command injection vulnerability via the system_time_timezone parameter.

A vulnerability, which was classified as critical, was found in TOTOLINK A3600R 4.1.2cu.5182_B20201102. This affects the function setdeviceName of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument deviceMac/deviceName leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-272595. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in TOTOLINK A3600R 4.1.2cu.5182_B20201102. This vulnerability affects the function setTelnetCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument telnet_enabled leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-272602 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in TOTOLINK LR350 9.3.5u.6369_B20220309 and classified as critical. Affected by this vulnerability is the function setWanCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument hostName leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-272785 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Improper neutralization of livestatus command delimiters in the RestAPI in Checkmk < 2.0.0p36, < 2.1.0p28, and < 2.2.0b8 (beta) allows arbitrary livestatus command execution for authorized users.

Improper neutralization of special elements used in a command ('Command Injection') vulnerability in Printer service functionality in ASUSTOR Data Master (ADM) allows remote unauthorized users to execute arbitrary commands via unspecified vectors. Affected products and versions include: ADM 4.0.6.RIS1, 4.1.0 and below as well as ADM 4.2.2.RI61 and below.

An improper neutralization of special elements used in a command ('Command Injection') vulnerability [CWE-77] in FortiPortal version 7.2.0, version 7.0.6 and below may allow a remote authenticated attacker with at least R/W permission to execute unauthorized commands via specifically crafted arguments in the Schedule System Backup page field.

Linksys E8450 v1.2.00.360516 was discovered to contain a command injection vulnerability via wizard_status.

** UNSUPPORTED WHEN ASSIGNED ** Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in Apache Software Foundation Apache UIMA DUCC. When using the "Distributed UIMA Cluster Computing" (DUCC) module of Apache UIMA, an authenticated user that has the permissions to modify core entities can cause command execution as the system user that runs the web process. As the "Distributed UIMA Cluster Computing" module for UIMA is retired, we do not plan to release a fix for this issue. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

OpenMage LTS is an e-commerce platform. Prior to versions 19.4.22 and 20.0.19, a layout block was able to bypass the block blacklist to execute remote code. Versions 19.4.22 and 20.0.19 contain a patch for this issue.

Linksys E7350 1.1.00.032 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_do_enr_pbc_wps function.

nophp is a PHP web framework. Prior to version 0.0.1, nophp is vulnerable to shell command injection on httpd user. A patch was made available at commit e5409aa2d441789cbb35f6b119bef97ecc3986aa on 2023-03-30. Users should update index.php to 2023-03-30 or later or, as a workaround, add a function such as `env_patchsample230330.php` to env.php.

A vulnerability was found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. It has been classified as critical. Affected is an unknown function of the component Web Management Interface. The manipulation of the argument dpi leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-227652.

HCL BigFix Mobile is vulnerable to a command injection attack. An authenticated attacker could run arbitrary shell commands on the WebUI server.

github-slug-action is a GitHub Action to expose slug value of GitHub environment variables inside of one's GitHub workflow. Starting in version 4.0.0` and prior to version 4.4.1, this action uses the `github.head_ref` parameter in an insecure way. This vulnerability can be triggered by any user on GitHub on any workflow using the action on pull requests. They just need to create a pull request with a branch name, which can contain the attack payload. This can be used to execute code on the GitHub runners and to exfiltrate any secrets one uses in the CI pipeline. A patched action is available in version 4.4.1. No workaround is available.

RG-EW1200G PRO Wireless Routers EW_3.0(1)B11P204, RG-EW1800GX PRO Wireless Routers EW_3.0(1)B11P204, and RG-EW3200GX PRO Wireless Routers EW_3.0(1)B11P204 were discovered to contain multiple command injection vulnerabilities via the data.ip, data.protocal, data.iface and data.package parameters in the runPackDiagnose function of diagnose.lua.

Possible Command injection Vulnerability in iManager has been discovered in OpenText™ iManager 3.2.4.0000.

A vulnerability was found in Weaver E-Office 9.5 and classified as critical. Affected by this issue is some unknown functionality of the file /webroot/inc/utility_all.php of the component File Upload Handler. The manipulation leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-228776. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Cocos Engine is an open-source framework for building 2D & 3D real-time rendering and interactive content. In the github repo for Cocos Engine the `web-interface-check.yml` was subject to command injection. The `web-interface-check.yml` was triggered when a pull request was opened or updated and contained the user controllable field `(${{ github.head_ref }} – the name of the fork’s branch)`. This would allow an attacker to take over the GitHub Runner and run custom commands (potentially stealing secrets such as GITHUB_TOKEN) and altering the repository. The workflow has since been removed for the repository. There are no actions required of users.

A vulnerability was found in Tenda AC23 16.03.07.45_cn. It has been declared as critical. This vulnerability affects unknown code of the file /bin/ate of the component Service Port 7329. The manipulation of the argument v2 leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-228778 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.