An issue was discovered in TCPDF before 6.8.0. If libcurl is used, CURLOPT_SSL_VERIFYHOST and CURLOPT_SSL_VERIFYPEER are set unsafely.

Improper Certificate Validation vulnerability in LibreOffice "LibreOfficeKit" mode disables TLS certification verification LibreOfficeKit can be used for accessing LibreOffice functionality through C/C++. Typically this is used by third party components to reuse LibreOffice as a library to convert, view or otherwise interact with documents. LibreOffice internally makes use of "curl" to fetch remote resources such as images hosted on webservers. In affected versions of LibreOffice, when used in LibreOfficeKit mode only, then curl's TLS certification verification was disabled (CURLOPT_SSL_VERIFYPEER of false) In the fixed versions curl operates in LibreOfficeKit mode the same as in standard mode with CURLOPT_SSL_VERIFYPEER of true. This issue affects LibreOffice before version 24.2.4.

In gnss service, there is a possible escalation of privilege due to improper certificate validation. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS08720039; Issue ID: MSV-1424.

An issue was discovered in Couchbase Sync Gateway 3.x before 3.0.2. Admin credentials are not verified when using X.509 client-certificate authentication from Sync Gateway to Couchbase Server. When Sync Gateway is configured to authenticate with Couchbase Server using X.509 client certificates, the admin credentials provided to the Admin REST API are ignored, resulting in privilege escalation for unauthenticated users. The Public REST API is not impacted by this issue. A workaround is to replace X.509 certificate based authentication with Username and Password authentication inside the bootstrap configuration.

Vault and Vault Enterprise (“Vault”) TLS certificate auth method did not correctly validate client certificates when configured with a non-CA certificate as trusted certificate. In this configuration, an attacker may be able to craft a malicious certificate that could be used to bypass authentication. Fixed in Vault 1.15.5 and 1.14.10.

Under certain configurations of --tlsCAFile and tls.CAFile, MongoDB Server may skip peer certificate validation which may result in untrusted connections to succeed. This may effectively reduce the security guarantees provided by TLS and open connections that should have been closed due to failing certificate validation. This issue affects MongoDB Server v7.0 versions prior to and including 7.0.5, MongoDB Server v6.0 versions prior to and including 6.0.13, MongoDB Server v5.0 versions prior to and including 5.0.24 and MongoDB Server v4.4 versions prior to and including 4.4.28. Required Configuration : A server process will allow incoming connections to skip peer certificate validation if the server process was started with TLS enabled (net.tls.mode set to allowTLS, preferTLS, or requireTLS) and without a net.tls.CAFile configured.

fs2 is a compositional, streaming I/O library for Scala. When establishing a server-mode `TLSSocket` using `fs2-io` on Node.js, the parameter `requestCert = true` is ignored, peer certificate verification is skipped, and the connection proceeds. The vulnerability is limited to: 1. `fs2-io` running on Node.js. The JVM TLS implementation is completely independent. 2. `TLSSocket`s in server-mode. Client-mode `TLSSocket`s are implemented via a different API. 3. mTLS as enabled via `requestCert = true` in `TLSParameters`. The default setting is `false` for server-mode `TLSSocket`s. It was introduced with the initial Node.js implementation of fs2-io in 3.1.0. A patch is released in v3.2.11. The requestCert = true parameter is respected and the peer certificate is verified. If verification fails, a SSLException is raised. If using an unpatched version on Node.js, do not use a server-mode TLSSocket with requestCert = true to establish a mTLS connection.

Incorrect SSL certificate validation in Nagios Fusion 4.1.8 and earlier allows for Escalation of Privileges or Code Execution as root via vectors related to download of an untrusted update package in upgrade_to_latest.sh.

Icinga is a monitoring system which checks the availability of network resources, notifies users of outages, and generates performance data for reporting. The TLS certificate validation in all Icinga 2 versions starting from 2.4.0 was flawed, allowing an attacker to impersonate both trusted cluster nodes as well as any API users that use TLS client certificates for authentication (ApiUser objects with the client_cn attribute set). This vulnerability has been fixed in v2.14.3, v2.13.10, v2.12.11, and v2.11.12.

European Commission eIDAS-Node Integration Package before 2.3.1 allows Certificate Faking because an attacker can sign a manipulated SAML response with a forged certificate.

European Commission eIDAS-Node Integration Package before 2.3.1 has Missing Certificate Validation because a certain ExplicitKeyTrustEvaluator return value is not checked. NOTE: only 2.1 is confirmed to be affected.

An issue was discovered in Mbed TLS 3.x before 3.6.1. With TLS 1.3, when a server enables optional authentication of the client, if the client-provided certificate does not have appropriate values in if keyUsage or extKeyUsage extensions, then the return value of mbedtls_ssl_get_verify_result() would incorrectly have the MBEDTLS_X509_BADCERT_KEY_USAGE and MBEDTLS_X509_BADCERT_KEY_USAGE bits clear. As a result, an attacker that had a certificate valid for uses other than TLS client authentication would nonetheless be able to use it for TLS client authentication. Only TLS 1.3 servers were affected, and only with optional authentication (with required authentication, the handshake would be aborted with a fatal alert).

IBM Concert 1.0.0 and 1.0.1 vulnerable to attacks that rely on the use of cookies without the SameSite attribute.

There is a vulnerability in the AP Certificate Management Service which could allow a threat actor to execute an unauthenticated RCE attack. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system leading to complete system compromise.

A vulnerability was found in keycloak 7.x, when keycloak is configured with LDAP user federation and StartTLS is used instead of SSL/TLS from the LDAP server (ldaps), in this case user authentication succeeds even if invalid password has entered.

Lack of TLS certificate verification in log transmission of a financial module within LINE client for iOS prior to 13.16.0.

Xecurify's miniOrange Premium, Standard, and Enterprise Drupal SAML SP modules possess an authentication and authorization bypass vulnerability. An attacker with access to a HTTP-request intercepting method is able to bypass authentication and authorization by removing the SAML Assertion Signature - impersonating existing users and existing roles, including administrative users/roles. This vulnerability is not mitigated by configuring the module to enforce signatures or certificate checks. Xecurify recommends updating miniOrange modules to their most recent versions. This vulnerability is present in paid versions of the miniOrange Drupal SAML SP product affecting Drupal 7, 8, and 9.

A validation issue existed in Trust Anchor Management. This issue was addressed with improved validation. This issue is fixed in watchOS 5.2, macOS Mojave 10.14.4, Security Update 2019-002 High Sierra, Security Update 2019-002 Sierra, iOS 12.2. An untrusted radius server certificate may be trusted.

An improper certificate validation vulnerability exists in ToDesktop Builder v0.32.1 This vulnerability allows an unauthenticated, on-path attacker to spoof backend responses by exploiting insufficient certificate validation.

If a user visited a webpage with an invalid TLS certificate, and granted an exception, the webpage was able to provide a WebAuthn challenge that the user would be prompted to complete. This is in violation of the WebAuthN spec which requires "a secure transport established without errors". This vulnerability affects Firefox < 140 and Thunderbird < 140.

offlineimap before 6.3.4 added support for SSL server certificate validation but it is still possible to use SSL v2 protocol, which is a flawed protocol with multiple security deficiencies.

A vulnerability has been identified in SINEC INS (All versions < V1.0 SP2 Update 2). Affected products do not properly validate the certificate of the configured UMC server. This could allow an attacker to intercept credentials that are sent to the UMC server as well as to manipulate responses, potentially allowing an attacker to escalate privileges.

A vulnerability in the Cisco SD-WAN Solution could allow an unauthenticated, remote attacker to bypass certificate validation on an affected device. The vulnerability is due to improper certificate validation. An attacker could exploit this vulnerability by supplying a system image signed with a crafted certificate to an affected device, bypassing the certificate validation. An exploit could allow an attacker to deploy a crafted system image.

A vulnerability classified as critical has been found in cym1102 nginxWebUI up to 3.9.9. This affects the function handlePath of the file /adminPage/conf/saveCmd. The manipulation of the argument nginxPath leads to improper certificate validation. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-260577 was assigned to this vulnerability.

An issue in Automai BotManager v.25.2.0 allows a remote attacker to execute arbitrary code via the BotManager.exe component

Hutool v5.7.18's HttpRequest was discovered to ignore all TLS/SSL certificate validation.

Envoy is an open source edge and service proxy, designed for cloud-native applications. Envoy's tls allows re-use when some cert validation settings have changed from their default configuration. The only workaround for this issue is to ensure that default tls settings are used. Users are advised to upgrade.

x509/x509_verify.c in LibreSSL before 3.4.2, and OpenBSD before 7.0 errata 006, allows authentication bypass because an error for an unverified certificate chain is sometimes discarded.

CISA Thorium does not validate TLS certificates when connecting to Elasticsearch. An unauthenticated attacker with access to a Thorium cluster could impersonate the Elasticsearch service. Fixed in 1.1.2.

Microsoft Defender for IoT Remote Code Execution Vulnerability

IBM MQ Operator LTS 2.0.0 through 2.0.29, MQ Operator CD 3.0.0, 3.0.1, 3.1.0 through 3.1.3, 3.3.0, 3.4.0, 3.4.1, 3.5.0, 3.5.1 through 3.5.3, and MQ Operator SC2 3.2.0 through 3.2.12 Native HA CRR could be configured with a private key and chain other than the intended key which could disclose sensitive information or allow the attacker to perform unauthorized actions.

The EU Technical Specifications for Digital COVID Certificates before 1.1 mishandle certificate governance. A non-production public key certificate could have been used in production.

A flaw was found in keylime 5.8.1 and older. The issue in the Keylime agent and registrar code invalidates the cryptographic chain of trust from the Endorsement Key certificate to agent attestations.

The Zoom Client for Meetings for Windows in all versions before 5.3.0 fails to properly validate the certificate information used to sign .msi files when performing an update of the client. This could lead to remote code execution in an elevated privileged context.

An issue in MHSanaei 3x-ui before v.2.5.3 and before allows a remote attacker to execute arbitrary code via the management script x-ui passes the no check certificate option to wget when downloading updates

Pexip Infinity Connect before 1.8.0 mishandles TLS certificate validation. The allow list is not properly checked.

OpenSSL in Apple Mac OS X 10.6.x before 10.6.5 does not properly perform arithmetic, which allows remote attackers to bypass X.509 certificate authentication via an arbitrary certificate issued by a legitimate Certification Authority.

The Motorola MH702x devices, prior to version 2.0.0.301, do not properly verify the server certificate during communication with the support server which could lead to the communication channel being accessible by an attacker.

HashiCorp Nomad and Nomad Enterprise up to 0.10.2 incorrectly validated role/region associated with TLS certificates used for mTLS RPC, and were susceptible to privilege escalation. Fixed in 0.10.3.

The D-Link DIR-615 device before v20.12PTb04 doesn't use SSL for any of the authenticated pages. Also, it doesn't allow the user to generate his own SSL Certificate. An attacker can simply monitor network traffic to steal a user's credentials and/or credentials of users being added while sniffing the traffic.

An issue was discovered on Alecto IVM-100 2019-11-12 devices. The device uses a custom UDP protocol to start and control video and audio services. The protocol has been partially reverse engineered. Based upon the reverse engineering, no password or username is ever transferred over this protocol. Thus, one can set up the camera connection feed with only the encoded UID. It is possible to set up sessions with the camera over the Internet by using the encoded UID and the custom UDP protocol, because authentication happens at the client side.

A specially crafted x509 certificate can cause a single out of bounds byte overwrite in wolfSSL through 3.10.2 resulting in potential certificate validation vulnerabilities, denial of service and possible remote code execution. In order to trigger this vulnerability, the attacker needs to supply a malicious x509 certificate to either a server or a client application using this library.

Barco ClickShare Button R9861500D01 devices before 1.9.0 have Improper Following of a Certificate's Chain of Trust. The embedded 'dongle_bridge' program used to expose the functionalities of the ClickShare Button to a USB host, does not properly validate the whole certificate chain.

Enterprise Access Client Auto-Updater allows for Remote Code Execution prior to version 2.0.1.

A default installation of RustDesk 1.2.3 on Windows places a WDKTestCert certificate under Trusted Root Certification Authorities with Enhanced Key Usage of Code Signing (1.3.6.1.5.5.7.3.3), valid from 2023 until 2033. This is potentially unwanted, e.g., because there is no public documentation of security measures for the private key, and arbitrary software could be signed if the private key were to be compromised. NOTE: the vendor's position is "we do not have EV cert, so we use test cert as a workaround." Insertion into Trusted Root Certification Authorities was the originally intended behavior, and the UI ensured that the certificate installation step (checked by default) was visible to the user before proceeding with the product installation.

IBM Security Verify Access 10.0.0.0 through 10.0.6.1 uses insecure calls that could allow an attacker on the network to take control of the server. IBM X-Force ID: 254977.

An authentication bypass in Optoma 1080PSTX C02 allows an attacker to access the administration console without valid credentials.

strongSwan 5.9.8 and 5.9.9 potentially allows remote code execution because it uses a variable named "public" for two different purposes within the same function. There is initially incorrect access control, later followed by an expired pointer dereference. One attack vector is sending an untrusted client certificate during EAP-TLS. A server is affected only if it loads plugins that implement TLS-based EAP methods (EAP-TLS, EAP-TTLS, EAP-PEAP, or EAP-TNC). This is fixed in 5.9.10.

An issue was discovered on COROS PACE 3 devices through 3.0808.0. It implements a function to connect the watch to a WLAN. This function is mainly for downloading firmware files. Before downloading firmware files, the watch requests some information about the firmware via HTTPS from the back-end API. However, the X.509 server certificate within the TLS handshake is not validated by the device. This allows an attacker within an active machine-in-the-middle position, using a TLS proxy and a self-signed certificate, to eavesdrop and manipulate the HTTPS communication. This could be abused, for example, for stealing the API access token of the assigned user account.

Nanoleaf firmware v7.1.1 and below is missing TLS verification, allowing attackers to execute arbitrary code via a DNS hijacking attack.