Multiple vulnerabilities in the Cisco ATA 190 Series Analog Telephone Adapter Software could allow an attacker to perform a command injection attack resulting in remote code execution or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

An issue was discovered in rConfig 3.9.2. An attacker can directly execute system commands by sending a GET request to search.crud.php because the catCommand parameter is passed to the exec function without filtering, which can lead to command execution.

Dell EMC prior to version DDOS 7.9 contain(s) an OS command injection Vulnerability. An authenticated non admin attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application.

jc21 NGINX Proxy Manager through 2.9.19 allows OS command injection. When creating an access list, the backend builds an htpasswd file with crafted username and/or password input that is concatenated without any validation, and is directly passed to the exec command, potentially allowing an authenticated attacker to execute arbitrary commands on the system. NOTE: this is not part of any NGINX software shipped by F5.

A problem was found in Centreon Web through 19.04.3. An authenticated command injection is present in the page include/configuration/configObject/traps-mibs/formMibs.php. This page is called from the Centreon administration interface. This is the mibs management feature that contains a file filing form. At the time of submission of a file, the mnftr parameter is sent to the page and is not filtered properly. This allows one to inject Linux commands directly.

Multiple improper neutralization of special elements used in an OS Command ('OS Command Injection') vulnerabilities [CWE-78] in FortiWeb version 7.0.1 and below, 6.4 all versions, version 6.3.19 and below may allow an authenticated attacker to execute unauthorized code or commands via crafted parameters of HTTP requests.

Command injection in PAN-0S 9.0.2 and earlier may allow an authenticated attacker to gain access to a remote shell in PAN-OS, and potentially run with the escalated user’s permissions.

Nagios XI before 5.6.6 allows remote command execution as root. The exploit requires access to the server as the nagios user, or access as the admin user via the web interface. The getprofile.sh script, invoked by downloading a system profile (profile.php?cmd=download), is executed as root via a passwordless sudo entry; the script executes check_plugin, which is owned by the nagios user. A user logged into Nagios XI with permissions to modify plugins, or the nagios user on the server, can modify the check_plugin executable and insert malicious commands to execute as root.

Adtran 834-5 11.1.0.101-202106231430, and fixed as of SmartOS Version 12.6.3.1, devices allow OS Command Injection via shell metacharacters to the Ping or Traceroute utility.

Two OS command injection vulnerability exist in the vtysh_ubus toolsh_excute.constprop.1 functionality of Milesight UR32L v32.3.0.5. A specially-crafted network request can lead to command execution. An attacker can send a network request to trigger these vulnerabilities.This command injection is in the trace tool utility.

Possible Command Injection in iManager GET parameter has been discovered in OpenText™ iManager 3.2.6.0000.

In Bender/ebee Charge Controllers in multiple versions are prone to Command injection via Web interface. An authenticated attacker could enter shell commands into some input fields that are executed with root privileges.

A Remote Code Execution (RCE) issue in the addon CUx-Daemon 1.11a of the eQ-3 Homematic CCU-Firmware 2.35.16 until 2.45.6 allows remote authenticated attackers to execute system commands as root remotely via a simple HTTP request.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an authenticated remote command execution (RCE) vulnerability via the "mru" parameter in the "cstecgi.cgi" binary.

An OS command injection vulnerability has been reported to affect QNAP operating systems. If exploited, the vulnerability allows remote authenticated users to execute commands via susceptible QNAP devices. We have already fixed the vulnerability in the following versions: QTS 5.0.1.2376 build 20230421 and later QTS 4.5.4.2374 build 20230416 and later QuTS hero h5.0.1.2376 build 20230421 and later QuTS hero h4.5.4.2374 build 20230417 and later QuTScloud c5.0.1.2374 and later

A post-authentication remote command injection vulnerability in a CGI file in Western Digital My Cloud OS 5 devices that could allow an attacker to build files with redirects and execute larger payloads. This issue affects My Cloud OS 5 devices: before 5.26.300.

An OS command injection vulnerability has been reported to affect QUSBCam2. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following version: QUSBCam2 2.0.3 ( 2023/06/15 ) and later

Vulnerability in the CommandPost, Collector, and Sensor components of Fidelis Network and Deception enables an attacker with user level access to the CLI to inject root level commands into the component and neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.3.7 and in version 9.4. Patches and updates are available to address this vulnerability.

An OS command injection vulnerability exists in the vtysh_ubus _get_fw_logs functionality of Milesight UR32L v32.3.0.5. A specially crafted network request can lead to command execution. An attacker can send a network request to trigger this vulnerability.

An OS command injection vulnerability exists in the vtysh_ubus tcpdump_start_cb functionality of Milesight UR32L v32.3.0.5. A specially crafted HTTP request can lead to command execution. An authenticated attacker can send an HTTP request to trigger this vulnerability.

An issue was discovered on D-Link DIR-818LW devices from 2.05.B03 to 2.06B01 BETA. There is a command injection in HNAP1 SetWanSettings via an XML injection of the value of the Gateway key.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an Improper Neutralization of Special Elements Used In A Command via the Data collection endpoint. An attacker with admin privileges can upload a specially crafted file to achieve remote code execution.

Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Improper Input Validation vulnerability in N-able N-central allows OS Command Injection.This issue affects N-central: before 2025.3.1.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response in an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.3.7 and in version 9.4. Patches and updates are available to address this vulnerability.

An issue was discovered in Softing uaGate SI 1.60.01. A CGI script is vulnerable to command injection with a maliciously crafted url parameter.

A privilege escalation vulnerability exists in SolarWinds Serv-U before 15.1.7 for Linux.

The post-authentication command injection vulnerability in the Zyxel NBG6604 firmware version V1.01(ABIR.0)C0 could allow an authenticated attacker to execute some OS commands remotely by sending a crafted HTTP request.

Multiple authenticated command injection vulnerabilities exist in the command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

GoSecure on behalf of Genetec Inc. has found a flaw that allows for a remote code execution during the installation of ACAP applications on the Axis device. The application handling service in AXIS OS was vulnerable to command injection allowing an attacker to run arbitrary code. Axis has released patched AXIS OS versions for the highlighted flaw. Please refer to the Axis security advisory for more information and solution.

Grandstream GWN7610 before 1.0.8.18 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the filename in a /ubus/controller.icc.update_nds_webroot_from_tmp update_nds_webroot_from_tmp API call.

KLog Server through 2.4.1 allows authenticated command injection. async.php calls shell_exec() on the original value of the source parameter.

Jenkins Git Client Plugin 2.8.4 and earlier and 3.0.0-rc did not properly restrict values passed as URL argument to an invocation of 'git ls-remote', resulting in OS command injection.

Grandstream UCM6204 before 1.0.19.20 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the backupUCMConfig file-backup parameter to the /cgi? URI.

A vulnerability classified as critical was found in Ruijie RG-EG350 up to 20240318. Affected by this vulnerability is the function setAction of the file /itbox_pi/networksafe.php?a=set of the component HTTP POST Request Handler. The manipulation of the argument bandwidth leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-257977 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

EyesOfNetwork eonweb through 5.3-11 allows Remote Command Execution (by authenticated users) via shell metacharacters in the nagios_path parameter to lilac/export.php, as demonstrated by %26%26+curl to insert an "&& curl" substring for the shell.

Multiple vulnerabilities exist in RaspAP 2.3 to 2.6.5 in the "interface", "ssid" and "wpa_passphrase" POST parameters in /hostapd, when the parameter values contain special characters such as ";" or "$()" which enables an authenticated attacker to execute arbitrary OS commands.

User provided input is not sanitized on the AXIS License Plate Verifier specific “api.cgi” allowing for arbitrary code execution.

In Weidmueller Industrial WLAN devices in multiple versions an exploitable command injection vulnerability exists in the iw_webs functionality. A specially crafted iw_serverip parameter can cause user input to be reflected in a subsequent iw_system call, resulting in remote control over the device. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.

In Weidmueller Industrial WLAN devices in multiple versions an exploitable command injection vulnerability exists in encrypted diagnostic script functionality of the devices. A specially crafted diagnostic script file can cause arbitrary busybox commands to be executed, resulting in remote control over the device. An attacker can send diagnostic while authenticated as a low privilege user to trigger this vulnerability.

Grandstream GXV3370 before 1.0.1.41 and WP820 before 1.0.3.6 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in a /manager?action=getlogcat priority field.

User provided input is not sanitized in the “Settings > Access Control” configuration interface allowing for arbitrary code execution.

Gerapy is a distributed crawler management framework. Prior to version 0.9.9, an authenticated user could execute arbitrary commands. This issue is fixed in version 0.9.9. There are no known workarounds.

MyQ Server in MyQ X Smart before 8.2 allows remote code execution by unprivileged users because administrative session data can be read in the %PROGRAMFILES%\MyQ\PHP\Sessions directory. The "Select server file" feature is only intended for administrators but actually does not require authorization. An attacker can inject arbitrary OS commands (such as commands to create new .php files) via the Task Scheduler component.

An OS Command Injection vulnerability exists in SIMULIA 3DOrchestrate from Release 3DEXPERIENCE R2021x through Release 3DEXPERIENCE R2023x. A specially crafted HTTP request can lead to arbitrary command execution.

A vulnerability in the Cisco IOx application hosting environment could allow an authenticated, remote attacker to execute arbitrary commands as root on the underlying host operating system. This vulnerability is due to incomplete sanitization of parameters that are passed in for activation of an application. An attacker could exploit this vulnerability by deploying and activating an application in the Cisco IOx application hosting environment with a crafted activation payload file. A successful exploit could allow the attacker to execute arbitrary commands as root on the underlying host operating system.

Jenkins Pipeline: Groovy Plugin 2648.va9433432b33c and earlier uses the same checkout directories for distinct SCMs when reading the script file (typically Jenkinsfile) for Pipelines, allowing attackers with Item/Configure permission to invoke arbitrary OS commands on the controller through crafted SCM contents.

Multiple vulnerabilities in Cisco Intersight Private Virtual Appliance could allow an authenticated, remote attacker to execute arbitrary commands using root-level privileges. The attacker would need to have Administrator privileges on the affected device to exploit these vulnerabilities. These vulnerabilities are due to insufficient input validation when extracting uploaded software packages. An attacker could exploit these vulnerabilities by authenticating to an affected device and uploading a crafted software package. A successful exploit could allow the attacker to execute commands on the underlying operating system with root-level privileges.

Multiple vulnerabilities in the web management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The attacker would need valid device credentials but does not require administrator privileges to exploit this vulnerability. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device including the underlying operating system which could also affect the availability of the device.

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s) prior to 6.9.5, 6.8.9, 6.7.14-HF1. Aruba has released patches for Aruba ClearPass Policy Manager that address this security vulnerability.