A potential DOS vulnerability was discovered in GitLab CE/EE affecting all versions before 15.1.6, all versions starting from 15.2 before 15.2.4, all versions starting from 15.3 before 15.3.2. Malformed content added to the issue description could have been used to trigger high CPU usage.
Due to a memory leak, a denial-of-service vulnerability exists in the Rockwell Automation affected products. A malicious actor could exploit this vulnerability by performing multiple actions on certain web pages of the product causing the affected products to become fully unavailable and require a power cycle to recover.
Possible denial of service due to RTT responder consistently rejects all FTMR by transmitting FTM1 with failure status in the FTM parameter IE in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking
Denial of Service in GitHub repository usememos/memos prior to 0.9.1.
The ZlibDecoders in Netty 4.1.x before 4.1.46 allow for unbounded memory allocation while decoding a ZlibEncoded byte stream. An attacker could send a large ZlibEncoded byte stream to the Netty server, forcing the server to allocate all of its free memory to a single decoder.
PowerDNS Recursor from 4.1.0 up to and including 4.3.0 does not sufficiently defend against amplification attacks. An issue in the DNS protocol has been found that allow malicious parties to use recursive DNS services to attack third party authoritative name servers. The attack uses a crafted reply by an authoritative name server to amplify the resulting traffic between the recursive and other authoritative name servers. Both types of service can suffer degraded performance as an effect. This is triggered by random subdomains in the NSDNAME in NS records. PowerDNS Recursor 4.1.16, 4.2.2 and 4.3.1 contain a mitigation to limit the impact of this DNS protocol issue.
Publify before 8.0.1 is vulnerable to a Denial of Service attack
In Indy Node 1.12.2, there is an Uncontrolled Resource Consumption vulnerability. Indy Node has a bug in TAA handling code. The current primary can be crashed with a malformed transaction from a client, which leads to a view change. Repeated rapid view changes have the potential of bringing down the network. This is fixed in version 1.12.3.
A flaw was discovered in Undertow in versions before Undertow 2.1.1.Final where certain requests to the "Expect: 100-continue" header may cause an out of memory error. This flaw may potentially lead to a denial of service.
An incomplete fix for CVE-2020-12662 was shipped for Unbound in Red Hat Enterprise Linux 7, as part of erratum RHSA-2020:2414. Vulnerable versions of Unbound could still amplify an incoming query into a large number of queries directed to a target, even with a lower amplification ratio compared to versions of Unbound that shipped before the mentioned erratum. This issue is about the incomplete fix for CVE-2020-12662, and it does not affect upstream versions of Unbound.
Envoy is a cloud-native high-performance proxy. In versions prior to 1.22.1 secompressors accumulate decompressed data into an intermediate buffer before overwriting the body in the decode/encodeBody. This may allow an attacker to zip bomb the decompressor by sending a small highly compressed payload. Maliciously constructed zip files may exhaust system memory and cause a denial of service. Users are advised to upgrade. Users unable to upgrade may consider disabling decompression.
On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5, 14.1.x versions prior to 14.1.4.6, and 13.1.x versions prior to 13.1.5, when a Real Time Streaming Protocol (RTSP) profile is configured on a virtual server, undisclosed traffic can cause an increase in Traffic Management Microkernel (TMM) resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
GitLab through 12.9 is affected by a potential DoS in repository archive download.
The SSH daemon on MikroTik routers through v6.44.3 could allow remote attackers to generate CPU activity, trigger refusal of new authorized connections, and cause a reboot via connect and write system calls, because of uncontrolled resource management.
Pexip Infinity 27 before 28.0 allows remote attackers to trigger excessive resource consumption and termination because of registrar resource mishandling.
A vulnerability in gaizhenbiao/chuanhuchatgpt version 20240628 allows for a Denial of Service (DOS) attack. When uploading a file, if an attacker appends a large number of characters to the end of a multipart boundary, the system will continuously process each character, rendering ChuanhuChatGPT inaccessible. This uncontrolled resource consumption can lead to prolonged unavailability of the service, disrupting operations and causing potential data inaccessibility and loss of productivity.
An issue has been discovered in GitLab CE/EE affecting all versions from 11.6 before 17.10.7, 17.11 before 17.11.3, and 18.0 before 18.0.1. A Discord webhook integration may cause DoS.
On versions 15.0.0-15.0.1.1, 14.0.0-14.1.2.2, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, the BIG-IP ASM system may consume excessive resources when processing certain types of HTTP responses from the origin web server. This vulnerability is only known to affect resource-constrained systems in which the security policy is configured with response-side features, such as Data Guard or response-side learning.
The mikecao/flight PHP framework in versions prior to v1.2 is vulnerable to Denial of Service (DoS) attacks due to eager loading of request bodies in the Request class constructor. The framework automatically reads the entire request body on every HTTP request, regardless of whether the application needs it. An attacker can exploit this by sending requests with large payloads, causing excessive memory consumption and potentially exhausting available server memory, leading to application crashes or service unavailability. The vulnerability was fixed in v1.2 by implementing lazy loading of request bodies.
Lib/zipfile.py in Python through 3.7.2 allows remote attackers to cause a denial of service (resource consumption) via a ZIP bomb.
Some HTTP/2 implementations are vulnerable to unconstrained interal data buffering, potentially leading to a denial of service. The attacker opens the HTTP/2 window so the peer can send without constraint; however, they leave the TCP window closed so the peer cannot actually write (many of) the bytes on the wire. The attacker then sends a stream of requests for a large response object. Depending on how the servers queue the responses, this can consume excess memory, CPU, or both.
Uncontrolled Resource Consumption vulnerability in Honeywell Niagara Framework on Windows, Linux, QNX allows Content Spoofing.This issue affects Niagara Framework: before Niagara AX 3.8.1, before Niagara 4.1.
In version 0.3.32 of open-webui/open-webui, the absence of authentication mechanisms allows any unauthenticated attacker to access the `api/v1/utils/code/format` endpoint. If a malicious actor sends a POST request with an excessively high volume of content, the server could become completely unresponsive. This could lead to severe performance issues, causing the server to become unresponsive or experience significant degradation, ultimately resulting in service interruptions for legitimate users.
Clients using DNS-over-HTTPS (DoH) can exhaust a DNS resolver's CPU and/or memory by flooding it with crafted valid or invalid HTTP/2 traffic. This issue affects BIND 9 versions 9.18.0 through 9.18.32, 9.20.0 through 9.20.4, 9.21.0 through 9.21.3, and 9.18.11-S1 through 9.18.32-S1.
Starting in Python 3.12.0, the asyncio._SelectorSocketTransport.writelines() method would not "pause" writing and signal to the Protocol to drain the buffer to the wire once the write buffer reached the "high-water mark". Because of this, Protocols would not periodically drain the write buffer potentially leading to memory exhaustion. This vulnerability likely impacts a small number of users, you must be using Python 3.12.0 or later, on macOS or Linux, using the asyncio module with protocols, and using .writelines() method which had new zero-copy-on-write behavior in Python 3.12.0 and later. If not all of these factors are true then your usage of Python is unaffected.
Some HTTP/2 implementations are vulnerable to a reset flood, potentially leading to a denial of service. The attacker opens a number of streams and sends an invalid request over each stream that should solicit a stream of RST_STREAM frames from the peer. Depending on how the peer queues the RST_STREAM frames, this can consume excess memory, CPU, or both.
A vulnerability in the implementation of the Border Gateway Protocol (BGP) module in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain BGP packets. An attacker could exploit this vulnerability by sending a crafted BGP packet. A successful exploit could allow the attacker to cause a DoS condition on the affected device.
Some HTTP/2 implementations are vulnerable to ping floods, potentially leading to a denial of service. The attacker sends continual pings to an HTTP/2 peer, causing the peer to build an internal queue of responses. Depending on how efficiently this data is queued, this can consume excess CPU, memory, or both.
Some HTTP/2 implementations are vulnerable to window size manipulation and stream prioritization manipulation, potentially leading to a denial of service. The attacker requests a large amount of data from a specified resource over multiple streams. They manipulate window size and stream priority to force the server to queue the data in 1-byte chunks. Depending on how efficiently this data is queued, this can consume excess CPU, memory, or both.
Fileszie Check vulnerabilities allow a malicious user to bypass size limits or overload to the product. Affected products: ABB ASPECT - Enterprise v3.08.02; NEXUS Series v3.08.02; MATRIX Series v3.08.02
In Apache HTTP Server 2.4.53 and earlier, a malicious request to a lua script that calls r:parsebody(0) may cause a denial of service due to no default limit on possible input size.
qpid-cpp: ACL policies only loaded if the acl-file option specified enabling DoS by consuming all available file descriptors
Uncontrolled Resource Consumption vulnerability in PlexTrac allows WebSocket DoS.This issue affects PlexTrac: from 1.61.3 before 2.8.1.
In vm-superio before 0.1.1, the serial console FIFO can grow to unlimited memory usage when data is sent to the input source (i.e., standard input). This behavior cannot be reproduced from the guest side. When no rate limiting is in place, the host can be subject to memory pressure, impacting all other VMs running on the same host.
Denial-of-service in the DOM: Service Workers component. This vulnerability affects Firefox < 147 and Thunderbird < 147.
An issue was discovered in Open5gs v2.7.2. InitialUEMessage, Registration request sent at a specific time can crash AMF due to incorrect error handling of gmm_state_exception() function upon receipt of the Nausf_UEAuthentication_Authenticate response.
A prototype pollution in the lib.merge function of xe-utils v3.5.31 allows attackers to cause a Denial of Service (DoS) via supplying a crafted payload.
A denial-of-service issue was discovered in MediaWiki 1.37.x before 1.37.2. Rendering of w/index.php?title=Special%3AWhatLinksHere&target=Property%3AP31&namespace=1&invert=1 can take more than thirty seconds. There is a DDoS risk.
A vulnerability has been identified in SINAMICS PERFECT HARMONY GH180 with NXG I control, MLFBs: 6SR2...-, 6SR3...-, 6SR4...- (All Versions with option G28), SINAMICS PERFECT HARMONY GH180 with NXG II control, MLFBs: 6SR2...-, 6SR3...-, 6SR4...- (All Versions with option G28). A denial of service vulnerability exists in the affected products. The vulnerability could be exploited by an attacker with network access to the device. Successful exploitation requires no privileges and no user interaction. An attacker could use the vulnerability to compromise availability of the affected system. At the time of advisory publication no public exploitation of this security vulnerability was known.
FON2601E-SE, FON2601E-RE, FON2601E-FSW-S, and FON2601E-FSW-B with firmware versions 1.1.7 and earlier contain an issue where they may behave as open resolvers. If this vulnerability is exploited, FON routers may be leveraged for DNS amplification attacks to some other entities.
A vulnerability in ollama/ollama <=0.3.14 allows a malicious user to create a customized GGUF model file, upload it to the Ollama server, and create it. This can cause the server to allocate unlimited memory, leading to a Denial of Service (DoS) attack.
Mitsubishi Electric Q03/04/06/13/26UDVCPU: serial number 20081 and prior, Q04/06/13/26UDPVCPU: serial number 20081 and prior, and Q03UDECPU, Q04/06/10/13/20/26/50/100UDEHCPU: serial number 20101 and prior. A remote attacker can send specific bytes over Port 5007 that will result in an Ethernet stack crash and disruption to USB communication.
With pipelining enabled each incoming query on a TCP connection requires a similar resource allocation to a query received via UDP or via TCP without pipelining enabled. A client using a TCP-pipelined connection to a server could consume more resources than the server has been provisioned to handle. When a TCP connection with a large number of pipelined queries is closed, the load on the server releasing these multiple resources can cause it to become unresponsive, even for queries that can be answered authoritatively or from cache. (This is most likely to be perceived as an intermittent server problem).
On BIG-IP 14.1.0-14.1.2, 14.0.0-14.0.1, and 13.1.0-13.1.1, undisclosed HTTP requests may consume excessive amounts of systems resources which may lead to a denial of service.
In WhatsUp Gold versions released before 2023.1.3, an uncontrolled resource consumption vulnerability exists. A specially crafted unauthenticated HTTP request to the TestController Chart functionality can lead to denial of service.
An allocation of resources without limits or throttling vulnerability [CWE-770] in FortiOS versions 7.4.0 through 7.4.4, versions 7.2.0 through 7.2.8, versions 7.0.0 through 7.0.15, and versions 6.4.0 through 6.4.15 may allow an unauthenticated remote user to consume all system memory via multiple large file uploads.
A vulnerability, which was classified as problematic, has been found in Tongda OA 2017 up to 11.7. This issue affects some unknown processing of the file /inc/package_static_resources.php. The manipulation leads to resource consumption. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
Werkzeug is a Web Server Gateway Interface web application library. Applications using `werkzeug.formparser.MultiPartParser` corresponding to a version of Werkzeug prior to 3.0.6 to parse `multipart/form-data` requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds. Werkzeug version 3.0.6 fixes this issue.
By sending a specially crafted push message, a remote server could have hung the parent process, causing the browser to become unresponsive. This vulnerability affects Firefox < 132, Firefox ESR < 128.4, Thunderbird < 128.4, and Thunderbird < 132.
The WBM web application on firmwares prior to 03.02.02 and 03.01.07 on the WAGO PFC100 and PFC2000, respectively, runs on a lighttpd web server and makes use of the FastCGI module, which is intended to provide high performance for all Internet applications without the penalties of Web server APIs. However, the default configuration of this module appears to limit the number of concurrent php-cgi processes to two, which can be abused to cause a denial of service of the entire web server. This affects WAGO PFC200 Firmware version 03.00.39(12) and version 03.01.07(13), and WAGO PFC100 Firmware version 03.00.39(12) and version 03.02.02(14).