Dell VNX2 for file version 8.1.21.266 and earlier, contain an unauthenticated remote code execution vulnerability which may lead unauthenticated users to execute commands on the system.

In the MMM::Agent::Helpers::Network::add_ip function in MySQL Multi-Master Replication Manager (MMM) mmm_agentd 2.2.1 (for Solaris), a specially crafted MMM protocol message can cause a shell command injection resulting in arbitrary command execution with the privileges of the mmm\_agentd process. An attacker that can initiate a TCP session with mmm\_agentd can trigger this vulnerability.

GL-iNet products AR750/AR750S/AR300M/AR300M16/MT300N-V2/B1300/MT1300/SFT1200/X750 v4.3.11, MT3000/MT2500/AXT1800/AX1800/A1300/X300B v4.5.16, XE300 v4.3.16, E750 v4.3.12, AP1300/S1300 v4.3.13, and XE3000/X3000 v4.4 were discovered to contain a shell injection vulnerability via the interface check_ovpn_client_config and check_config.

Blink XT2 Sync Module firmware prior to 2.13.11 allows remote attackers to execute arbitrary commands on the device due to improperly sanitized input when the device retrieves updates scripts from the internet.

Bert-VITS2 is the VITS2 Backbone with multilingual bert. User input supplied to the data_dir variable is used directly in a command executed with subprocess.run(cmd, shell=True) in the resample function, which leads to arbitrary command execution. This affects fishaudio/Bert-VITS2 2.3 and earlier.

Sunhillo SureLine before 8.7.0.1.1 allows Unauthenticated OS Command Injection via shell metacharacters in ipAddr or dnsAddr /cgi/networkDiag.cgi.

In the MMM::Agent::Helpers::Network::send_arp function in MySQL Multi-Master Replication Manager (MMM) mmm_agentd 2.2.1 (for Solaris), a specially crafted MMM protocol message can cause a shell command injection resulting in arbitrary command execution with the privileges of the mmm\_agentd process. An attacker that can initiate a TCP session with mmm\_agentd can trigger this vulnerability.

In GL.iNET GL-AR300M routers with firmware v4.3.7, it is possible to inject arbitrary shell commands through a crafted package name in the package information functionality.

OS Command injection vulnerability in Mintzo Docker-Tester through 1.2.1 allows attackers to execute arbitrary commands via shell metacharacters in the 'ports' entry of a crafted docker-compose.yml file.

OS Command Injection vulnerability in allenhwkim proctree through 0.1.1 and commit 0ac10ae575459457838f14e21d5996f2fa5c7593 for Node.js, allows attackers to execute arbitrary commands via the fix function.

OS Command Injection vulnerability in es128 ssl-utils 1.0.0 for Node.js allows attackers to execute arbitrary commands via unsanitized shell metacharacters provided to the createCertRequest() and the createCert() functions.

Thecus 4800Eco was discovered to contain a command injection vulnerability via the username parameter in /adm/setmain.php.

OS command injection vulnerability exists in awkblog v0.0.1 (commit hash:7b761b192d0e0dc3eef0f30630e00ece01c8d552) and earlier. If a remote unauthenticated attacker sends a specially crafted HTTP request, an arbitrary OS command may be executed with the privileges of the affected product on the machine running the product.

Blink XT2 Sync Module firmware prior to 2.13.11 allows remote attackers to execute arbitrary commands on the device due to improperly sanitized input when retrieving internal network configuration data.

The Crestron AM-100 firmware 1.6.0.2, Crestron AM-101 firmware 2.7.0.1, Barco wePresent WiPG-1000P firmware 2.3.0.10, Barco wePresent WiPG-1600W before firmware 2.4.1.19, Extron ShareLink 200/250 firmware 2.0.3.4, Teq AV IT WIPS710 firmware 1.1.0.7, SHARP PN-L703WA firmware 1.4.2.3, Optoma WPS-Pro firmware 1.0.0.5, Blackbox HD WPS firmware 1.0.0.5, InFocus LiteShow3 firmware 1.0.16, and InFocus LiteShow4 2.0.0.7 are vulnerable to command injection via the file_transfer.cgi HTTP endpoint. A remote, unauthenticated attacker can use this vulnerability to execute operating system commands as root.

elFinder is an open-source file manager for web, written in JavaScript using jQuery UI. Several vulnerabilities affect elFinder 2.1.58. These vulnerabilities can allow an attacker to execute arbitrary code and commands on the server hosting the elFinder PHP connector, even with minimal configuration. The issues were patched in version 2.1.59. As a workaround, ensure the connector is not exposed without authentication.

Improper input validation in the built-in web server in Moxa NPort IAW5000A-I/O series firmware version 2.2 or earlier may allow a remote attacker to execute commands.

A command injection vulnerability in the web server of the Zyxel NAS326 firmware version V5.21(AAZF.14)C0 and NAS542 firmware version V5.21(ABAG.11)C0 could allow an unauthenticated attacker to execute some operating system (OS) commands by sending a crafted URL to a vulnerable device.

reg-keygen-git-hash-plugin is a reg-suit plugin to detect the snapshot key to be compare with using Git commit hash. reg-keygen-git-hash-plugin through and including 0.10.15 allow remote attackers to execute of arbitrary commands. Upgrade to version 0.10.16 or later to resolve this issue.

Zoho ManageEngine ADSelfService Plus through 6102 allows unauthenticated remote code execution in non-English editions.

Activity Watch is a free and open-source automated time tracker. Versions prior to 0.11.0 allow an attacker to execute arbitrary commands on any macOS machine with ActivityWatch running. The attacker can exploit this vulnerability by having the user visiting a website with the page title set to a malicious string. An attacker could use another application to accomplish the same, but the web browser is the most likely attack vector. This issue is patched in version 0.11.0. As a workaround, users can run the latest version of aw-watcher-window from source, or manually patch the `printAppTitle.scpt` file.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker via the vulnerable /sqfs/lib/libsal.so.0.0 library used by a CGI application, as demonstrated by setup.cgi?token=';$HTTP_USER_AGENT;' with an OS command in the User-Agent field. This affects GC108P before 1.0.7.3, GC108PP before 1.0.7.3, GS108Tv3 before 7.0.6.3, GS110TPPv1 before 7.0.6.3, GS110TPv3 before 7.0.6.3, GS110TUPv1 before 1.0.4.3, GS710TUPv1 before 1.0.4.3, GS716TP before 1.0.2.3, GS716TPP before 1.0.2.3, GS724TPPv1 before 2.0.4.3, GS724TPv2 before 2.0.4.3, GS728TPPv2 before 6.0.6.3, GS728TPv2 before 6.0.6.3, GS752TPPv1 before 6.0.6.3, GS752TPv2 before 6.0.6.3, MS510TXM before 1.0.2.3, and MS510TXUP before 1.0.2.3.

An attacker could leverage an API to pass along a malicious file that could then manipulate the process creation command line in MDT AutoSave versions prior to v6.02.06 and run a command line argument. This could then be leveraged to run a malicious process.

SysAid - CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')

A vulnerability classified as critical was found in cym1102 nginxWebUI up to 3.9.9. This vulnerability affects unknown code of the file /adminPage/main/upload. The manipulation of the argument file leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-260578 is the identifier assigned to this vulnerability.

A vulnerability classified as critical has been found in mikexstudios Xcomic up to 0.8.2. This affects an unknown part. The manipulation of the argument cmd leads to os command injection. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 0.8.3 is able to address this issue. The patch is named 6ed8e3cc336e29f09c7e791863d0559939da98bf. It is recommended to upgrade the affected component.

A vulnerability was found in D-Link DAR-8000-10 up to 20230809. It has been classified as critical. This affects an unknown part of the file /app/sys1.php. The manipulation of the argument cmd with the input id leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-238047. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

QuickInstall in QSAN Storage Manager does not filter special parameters properly that allows remote unauthenticated attackers to inject and execute arbitrary commands. The referred vulnerability has been solved with the updated version of QSAN Storage Manager v3.3.3.

The unprivileged user portal part of CentOS Web Panel is affected by a Command Injection vulnerability leading to root Remote Code Execution.

OS command injection vulnerability in Init function in QSAN XEVO allows remote attackers to execute arbitrary commands without permissions. The referred vulnerability has been solved with the updated version of QSAN XEVO v2.1.0.

WebSVN before 2.6.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the search parameter.

OS command injection vulnerability in Array function in QSAN XEVO allows remote unauthenticated attackers to execute arbitrary commands via status parameter. The referred vulnerability has been solved with the updated version of QSAN XEVO v2.1.0.

CMCAgent in NCR Command Center Agent 16.3 on Aloha POS/BOH servers permits the submission of a runCommand parameter (within an XML document sent to port 8089) that enables the remote, unauthenticated execution of an arbitrary command as SYSTEM, as exploited in the wild in 2020 and/or 2021. NOTE: the vendor's position is that exploitation occurs only on devices with a certain "misconfiguration."

Quectel EG25-G devices through 202006130814 allow executing arbitrary code remotely by using an AT command to place shell metacharacters in quectel_handle_fumo_cfg input in atfwd_daemon.

EnGenius EWS356-FIT devices through 1.1.30 allow blind OS command injection. This allows an attacker to execute arbitrary OS commands via shell metacharacters to the Ping and Speed Test utilities.

The api/zrDm/set_ZRElink interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the bssaddr, abiaddr, devtoken, devid, elinksync, or elink_proc_enable parameter.

A vulnerability has been identified in InterMesh 7177 Hybrid 2.0 Subscriber (All versions < V8.2.12), InterMesh 7707 Fire Subscriber (All versions < V7.2.12 only if the IP interface is enabled (which is not the default configuration)). The web server of affected devices does not sanitize the input parameters in specific GET requests that allow for code execution on operating system level. In combination with other vulnerabilities (CVE-2024-47902, CVE-2024-47903, CVE-2024-47904) this could allow an unauthenticated remote attacker to execute arbitrary code with root privileges.

The api/ZRAndlink/set_ZRAndlink interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the iandlink_proc_enable parameter.

Tiki Wiki CMS – CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')

The api/ZRIGMP/set_IGMP_PROXY interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the IGMP_PROXY_WAN_CONNECT parameter.

EVOLUCARE ECSIMAGING (aka ECS Imaging) through 6.21.5 has an OS Command Injection vulnerability via shell metacharacters and an IFS manipulation. The parameter "file" on the webpage /showfile.php can be exploited to gain root access. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

The api/ZRIptv/setIptvInfo interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the iptv_vlan parameter.

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 are vulnerable to command injection via SNMP OID iso.3.6.1.4.1.3212.100.3.2.14.1. A remote, unauthenticated attacker can use this vulnerability to execute operating system commands as root.

An issue was discovered in Pascom Cloud Phone System before 7.20.x. In the management REST API, /services/apply in exd.pl allows remote attackers to execute arbitrary code via shell metacharacters.

Discord-Recon is a bot for the Discord chat service. Versions of Discord-Recon 0.0.3 and prior contain a vulnerability in which a remote attacker is able to overwrite any file on the system with the command results. This can result in remote code execution when the user overwrite important files on the system. As a workaround, bot maintainers can edit their `setting.py` file then add `<` and `>` into the `RCE` variable inside of it to fix the issue without an update. The vulnerability is patched in version 0.0.4.

The gnuplot package prior to version 0.1.0 for Node.js allows code execution via shell metacharacters in Gnuplot commands.

netis-systems MEX605 v2.00.06 allows attackers to execute arbitrary OS commands via a crafted payload to the tracert page.

A command injection vulnerabilities have been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. This issue affects: QNAP Systems Inc. QTS versions prior to 4.5.1.1540 build 20210107. QNAP Systems Inc. QuTS hero versions prior to h4.5.1.1582 build 20210217.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QTS 4.5.4.2627 build 20231225 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTS hero h4.5.4.2626 build 20231225 and later QuTScloud c5.1.5.2651 and later

Yocto Project is an open source collaboration project that helps developers create custom Linux-based systems regardless of the hardware architecture. In Yocto Projects Bitbake before 2.6.2 (before and included Yocto Project 4.3.1), with the Toaster server (included in bitbake) running, missing input validation allows an attacker to perform a remote code execution in the server's shell via a crafted HTTP request. Authentication is not necessary. Toaster server execution has to be specifically run and is not the default for Bitbake command line builds, it is only used for the Toaster web based user interface to Bitbake. The fix has been backported to the bitbake included with Yocto Project 5.0, 3.1.31, 4.0.16, and 4.3.2.