In the Linux kernel, the following vulnerability has been resolved: pm: cpupower: bench: Prevent NULL dereference on malloc failure If malloc returns NULL due to low memory, 'config' pointer can be NULL. Add a check to prevent NULL dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Don't call mmput from MMU notifier callback If the process is exiting, the mmput inside mmu notifier callback from compactd or fork or numa balancing could release the last reference of mm struct to call exit_mmap and free_pgtable, this triggers deadlock with below backtrace. The deadlock will leak kfd process as mmu notifier release is not called and cause VRAM leaking. The fix is to take mm reference mmget_non_zero when adding prange to the deferred list to pair with mmput in deferred list work. If prange split and add into pchild list, the pchild work_item.mm is not used, so remove the mm parameter from svm_range_unmap_split and svm_range_add_child. The backtrace of hung task: INFO: task python:348105 blocked for more than 64512 seconds. Call Trace: __schedule+0x1c3/0x550 schedule+0x46/0xb0 rwsem_down_write_slowpath+0x24b/0x4c0 unlink_anon_vmas+0xb1/0x1c0 free_pgtables+0xa9/0x130 exit_mmap+0xbc/0x1a0 mmput+0x5a/0x140 svm_range_cpu_invalidate_pagetables+0x2b/0x40 [amdgpu] mn_itree_invalidate+0x72/0xc0 __mmu_notifier_invalidate_range_start+0x48/0x60 try_to_unmap_one+0x10fa/0x1400 rmap_walk_anon+0x196/0x460 try_to_unmap+0xbb/0x210 migrate_page_unmap+0x54d/0x7e0 migrate_pages_batch+0x1c3/0xae0 migrate_pages_sync+0x98/0x240 migrate_pages+0x25c/0x520 compact_zone+0x29d/0x590 compact_zone_order+0xb6/0xf0 try_to_compact_pages+0xbe/0x220 __alloc_pages_direct_compact+0x96/0x1a0 __alloc_pages_slowpath+0x410/0x930 __alloc_pages_nodemask+0x3a9/0x3e0 do_huge_pmd_anonymous_page+0xd7/0x3e0 __handle_mm_fault+0x5e3/0x5f0 handle_mm_fault+0xf7/0x2e0 hmm_vma_fault.isra.0+0x4d/0xa0 walk_pmd_range.isra.0+0xa8/0x310 walk_pud_range+0x167/0x240 walk_pgd_range+0x55/0x100 __walk_page_range+0x87/0x90 walk_page_range+0xf6/0x160 hmm_range_fault+0x4f/0x90 amdgpu_hmm_range_get_pages+0x123/0x230 [amdgpu] amdgpu_ttm_tt_get_user_pages+0xb1/0x150 [amdgpu] init_user_pages+0xb1/0x2a0 [amdgpu] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x543/0x7d0 [amdgpu] kfd_ioctl_alloc_memory_of_gpu+0x24c/0x4e0 [amdgpu] kfd_ioctl+0x29d/0x500 [amdgpu] (cherry picked from commit a29e067bd38946f752b0ef855f3dfff87e77bec7)

In the Linux kernel, the following vulnerability has been resolved: jfs: reject on-disk inodes of an unsupported type Syzbot has reported the following BUG: kernel BUG at fs/inode.c:668! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 3 UID: 0 PID: 139 Comm: jfsCommit Not tainted 6.12.0-rc4-syzkaller-00085-g4e46774408d9 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 RIP: 0010:clear_inode+0x168/0x190 Code: 4c 89 f7 e8 ba fe e5 ff e9 61 ff ff ff 44 89 f1 80 e1 07 80 c1 03 38 c1 7c c1 4c 89 f7 e8 90 ff e5 ff eb b7 0b e8 01 5d 7f ff 90 0f 0b e8 f9 5c 7f ff 90 0f 0b e8 f1 5c 7f RSP: 0018:ffffc900027dfae8 EFLAGS: 00010093 RAX: ffffffff82157a87 RBX: 0000000000000001 RCX: ffff888104d4b980 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: ffffc900027dfc90 R08: ffffffff82157977 R09: fffff520004fbf38 R10: dffffc0000000000 R11: fffff520004fbf38 R12: dffffc0000000000 R13: ffff88811315bc00 R14: ffff88811315bda8 R15: ffff88811315bb80 FS: 0000000000000000(0000) GS:ffff888135f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005565222e0578 CR3: 0000000026ef0000 CR4: 00000000000006f0 Call Trace: <TASK> ? __die_body+0x5f/0xb0 ? die+0x9e/0xc0 ? do_trap+0x15a/0x3a0 ? clear_inode+0x168/0x190 ? do_error_trap+0x1dc/0x2c0 ? clear_inode+0x168/0x190 ? __pfx_do_error_trap+0x10/0x10 ? report_bug+0x3cd/0x500 ? handle_invalid_op+0x34/0x40 ? clear_inode+0x168/0x190 ? exc_invalid_op+0x38/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? clear_inode+0x57/0x190 ? clear_inode+0x167/0x190 ? clear_inode+0x168/0x190 ? clear_inode+0x167/0x190 jfs_evict_inode+0xb5/0x440 ? __pfx_jfs_evict_inode+0x10/0x10 evict+0x4ea/0x9b0 ? __pfx_evict+0x10/0x10 ? iput+0x713/0xa50 txUpdateMap+0x931/0xb10 ? __pfx_txUpdateMap+0x10/0x10 jfs_lazycommit+0x49a/0xb80 ? _raw_spin_unlock_irqrestore+0x8f/0x140 ? lockdep_hardirqs_on+0x99/0x150 ? __pfx_jfs_lazycommit+0x10/0x10 ? __pfx_default_wake_function+0x10/0x10 ? __kthread_parkme+0x169/0x1d0 ? __pfx_jfs_lazycommit+0x10/0x10 kthread+0x2f2/0x390 ? __pfx_jfs_lazycommit+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x4d/0x80 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> This happens when 'clear_inode()' makes an attempt to finalize an underlying JFS inode of unknown type. According to JFS layout description from https://jfs.sourceforge.net/project/pub/jfslayout.pdf, inode types from 5 to 15 are reserved for future extensions and should not be encountered on a valid filesystem. So add an extra check for valid inode type in 'copy_from_dinode()'.

In the Linux kernel, the following vulnerability has been resolved: mm/shmem, swap: fix softlockup with mTHP swapin Following softlockup can be easily reproduced on my test machine with: echo always > /sys/kernel/mm/transparent_hugepage/hugepages-64kB/enabled swapon /dev/zram0 # zram0 is a 48G swap device mkdir -p /sys/fs/cgroup/memory/test echo 1G > /sys/fs/cgroup/test/memory.max echo $BASHPID > /sys/fs/cgroup/test/cgroup.procs while true; do dd if=/dev/zero of=/tmp/test.img bs=1M count=5120 cat /tmp/test.img > /dev/null rm /tmp/test.img done Then after a while: watchdog: BUG: soft lockup - CPU#0 stuck for 763s! [cat:5787] Modules linked in: zram virtiofs CPU: 0 UID: 0 PID: 5787 Comm: cat Kdump: loaded Tainted: G L 6.15.0.orig-gf3021d9246bc-dirty #118 PREEMPT(voluntary)· Tainted: [L]=SOFTLOCKUP Hardware name: Red Hat KVM/RHEL-AV, BIOS 0.0.0 02/06/2015 RIP: 0010:mpol_shared_policy_lookup+0xd/0x70 Code: e9 b8 b4 ff ff 31 c0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 41 54 55 53 <48> 8b 1f 48 85 db 74 41 4c 8d 67 08 48 89 fb 48 89 f5 4c 89 e7 e8 RSP: 0018:ffffc90002b1fc28 EFLAGS: 00000202 RAX: 00000000001c20ca RBX: 0000000000724e1e RCX: 0000000000000001 RDX: ffff888118e214c8 RSI: 0000000000057d42 RDI: ffff888118e21518 RBP: 000000000002bec8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000bf4 R11: 0000000000000000 R12: 0000000000000001 R13: 00000000001c20ca R14: 00000000001c20ca R15: 0000000000000000 FS: 00007f03f995c740(0000) GS:ffff88a07ad9a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f03f98f1000 CR3: 0000000144626004 CR4: 0000000000770eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> shmem_alloc_folio+0x31/0xc0 shmem_swapin_folio+0x309/0xcf0 ? filemap_get_entry+0x117/0x1e0 ? xas_load+0xd/0xb0 ? filemap_get_entry+0x101/0x1e0 shmem_get_folio_gfp+0x2ed/0x5b0 shmem_file_read_iter+0x7f/0x2e0 vfs_read+0x252/0x330 ksys_read+0x68/0xf0 do_syscall_64+0x4c/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f03f9a46991 Code: 00 48 8b 15 81 14 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d 35 97 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec RSP: 002b:00007fff3c52bd28 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007f03f9a46991 RDX: 0000000000040000 RSI: 00007f03f98ba000 RDI: 0000000000000003 RBP: 00007fff3c52bd50 R08: 0000000000000000 R09: 00007f03f9b9a380 R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000 R13: 00007f03f98ba000 R14: 0000000000000003 R15: 0000000000000000 </TASK> The reason is simple, readahead brought some order 0 folio in swap cache, and the swapin mTHP folio being allocated is in conflict with it, so swapcache_prepare fails and causes shmem_swap_alloc_folio to return -EEXIST, and shmem simply retries again and again causing this loop. Fix it by applying a similar fix for anon mTHP swapin. The performance change is very slight, time of swapin 10g zero folios with shmem (test for 12 times): Before: 2.47s After: 2.48s [kasong@tencent.com: add comment]

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Fix potential NULL dereference on kmalloc failure Avoid potential NULL pointer dereference by checking the return value of kmalloc and handling allocation failure properly.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: limit repeated connections from clients with the same IP Repeated connections from clients with the same IP address may exhaust the max connections and prevent other normal client connections. This patch limit repeated connections from clients with the same IP.

In the Linux kernel, the following vulnerability has been resolved: netlink: Fix wraparounds of sk->sk_rmem_alloc. Netlink has this pattern in some places if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf) atomic_add(skb->truesize, &sk->sk_rmem_alloc); , which has the same problem fixed by commit 5a465a0da13e ("udp: Fix multiple wraparounds of sk->sk_rmem_alloc."). For example, if we set INT_MAX to SO_RCVBUFFORCE, the condition is always false as the two operands are of int. Then, a single socket can eat as many skb as possible until OOM happens, and we can see multiple wraparounds of sk->sk_rmem_alloc. Let's fix it by using atomic_add_return() and comparing the two variables as unsigned int. Before: [root@fedora ~]# ss -f netlink Recv-Q Send-Q Local Address:Port Peer Address:Port -1668710080 0 rtnl:nl_wraparound/293 * After: [root@fedora ~]# ss -f netlink Recv-Q Send-Q Local Address:Port Peer Address:Port 2147483072 0 rtnl:nl_wraparound/290 * ^ `--- INT_MAX - 576

In the Linux kernel, the following vulnerability has been resolved: ACPICA: fix acpi operand cache leak in dswstate.c ACPICA commit 987a3b5cf7175916e2a4b6ea5b8e70f830dfe732 I found an ACPI cache leak in ACPI early termination and boot continuing case. When early termination occurs due to malicious ACPI table, Linux kernel terminates ACPI function and continues to boot process. While kernel terminates ACPI function, kmem_cache_destroy() reports Acpi-Operand cache leak. Boot log of ACPI operand cache leak is as follows: >[ 0.585957] ACPI: Added _OSI(Module Device) >[ 0.587218] ACPI: Added _OSI(Processor Device) >[ 0.588530] ACPI: Added _OSI(3.0 _SCP Extensions) >[ 0.589790] ACPI: Added _OSI(Processor Aggregator Device) >[ 0.591534] ACPI Error: Illegal I/O port address/length above 64K: C806E00000004002/0x2 (20170303/hwvalid-155) >[ 0.594351] ACPI Exception: AE_LIMIT, Unable to initialize fixed events (20170303/evevent-88) >[ 0.597858] ACPI: Unable to start the ACPI Interpreter >[ 0.599162] ACPI Error: Could not remove SCI handler (20170303/evmisc-281) >[ 0.601836] kmem_cache_destroy Acpi-Operand: Slab cache still has objects >[ 0.603556] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc5 #26 >[ 0.605159] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 >[ 0.609177] Call Trace: >[ 0.610063] ? dump_stack+0x5c/0x81 >[ 0.611118] ? kmem_cache_destroy+0x1aa/0x1c0 >[ 0.612632] ? acpi_sleep_proc_init+0x27/0x27 >[ 0.613906] ? acpi_os_delete_cache+0xa/0x10 >[ 0.617986] ? acpi_ut_delete_caches+0x3f/0x7b >[ 0.619293] ? acpi_terminate+0xa/0x14 >[ 0.620394] ? acpi_init+0x2af/0x34f >[ 0.621616] ? __class_create+0x4c/0x80 >[ 0.623412] ? video_setup+0x7f/0x7f >[ 0.624585] ? acpi_sleep_proc_init+0x27/0x27 >[ 0.625861] ? do_one_initcall+0x4e/0x1a0 >[ 0.627513] ? kernel_init_freeable+0x19e/0x21f >[ 0.628972] ? rest_init+0x80/0x80 >[ 0.630043] ? kernel_init+0xa/0x100 >[ 0.631084] ? ret_from_fork+0x25/0x30 >[ 0.633343] vgaarb: loaded >[ 0.635036] EDAC MC: Ver: 3.0.0 >[ 0.638601] PCI: Probing PCI hardware >[ 0.639833] PCI host bridge to bus 0000:00 >[ 0.641031] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] > ... Continue to boot and log is omitted ... I analyzed this memory leak in detail and found acpi_ds_obj_stack_pop_and_ delete() function miscalculated the top of the stack. acpi_ds_obj_stack_push() function uses walk_state->operand_index for start position of the top, but acpi_ds_obj_stack_pop_and_delete() function considers index 0 for it. Therefore, this causes acpi operand memory leak. This cache leak causes a security threat because an old kernel (<= 4.9) shows memory locations of kernel functions in stack dump. Some malicious users could use this information to neutralize kernel ASLR. I made a patch to fix ACPI operand cache leak.

In the Linux kernel, the following vulnerability has been resolved: fbdev: omapfb: Add 'plane' value check Function dispc_ovl_setup is not intended to work with the value OMAP_DSS_WB of the enum parameter plane. The value of this parameter is initialized in dss_init_overlays and in the current state of the code it cannot take this value so it's not a real problem. For the purposes of defensive coding it wouldn't be superfluous to check the parameter value, because some functions down the call stack process this value correctly and some not. For example, in dispc_ovl_setup_global_alpha it may lead to buffer overflow. Add check for this value. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: Revert "drm/gem-framebuffer: Use dma_buf from GEM object instance" This reverts commit cce16fcd7446dcff7480cd9d2b6417075ed81065. The dma_buf field in struct drm_gem_object is not stable over the object instance's lifetime. The field becomes NULL when user space releases the final GEM handle on the buffer object. This resulted in a NULL-pointer deref. Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer: Acquire internal references on GEM handles") only solved the problem partially. They especially don't work for buffer objects without a DRM framebuffer associated. Hence, this revert to going back to using .import_attach->dmabuf. v3: - cc stable

In the Linux kernel, the following vulnerability has been resolved: can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode Andrei Lalaev reported a NULL pointer deref when a CAN device is restarted from Bus Off and the driver does not implement the struct can_priv::do_set_mode callback. There are 2 code path that call struct can_priv::do_set_mode: - directly by a manual restart from the user space, via can_changelink() - delayed automatic restart after bus off (deactivated by default) To prevent the NULL pointer deference, refuse a manual restart or configure the automatic restart delay in can_changelink() and report the error via extack to user space. As an additional safety measure let can_restart() return an error if can_priv::do_set_mode is not set instead of dereferencing it unchecked.

In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume Shawn and John reported a hang issue during system suspend as below: - USB gadget is enabled as Ethernet - There is data transfer over USB Ethernet (scp a big file between host and device) - Device is going in/out suspend (echo mem > /sys/power/state) The root cause is the USB device controller is suspended but the USB bus is still active which caused the USB host continues to transfer data with device and the device continues to queue USB requests (in this case, a delayed TCP ACK packet trigger the issue) after controller is suspended, however the USB controller clock is already gated off. Then if udc driver access registers after that point, the system will hang. The correct way to avoid such issue is to disconnect device from host when the USB bus is not at suspend state. Then the host will receive disconnect event and stop data transfer in time. To continue make USB gadget device work after system resume, this will reconnect device automatically. To make usb wakeup work if USB bus is already at suspend state, this will keep connection for it only when USB device controller has enabled wakeup capability.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: fix SER panic with 4GB+ RAM If the mtk_poll_rx() function detects the MTK_RESETTING flag, it will jump to release_desc and refill the high word of the SDP on the 4GB RFB. Subsequently, mtk_rx_clean will process an incorrect SDP, leading to a panic. Add patch from MediaTek's SDK to resolve this.

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: account for Ethernet header in nf_flow_pppoe_proto() syzbot found a potential access to uninit-value in nf_flow_pppoe_proto() Blamed commit forgot the Ethernet header. BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x7e4/0x940 net/netfilter/nf_flow_table_inet.c:27 nf_flow_offload_inet_hook+0x7e4/0x940 net/netfilter/nf_flow_table_inet.c:27 nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline] nf_hook_slow+0xe1/0x3d0 net/netfilter/core.c:623 nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline] nf_ingress net/core/dev.c:5742 [inline] __netif_receive_skb_core+0x4aff/0x70c0 net/core/dev.c:5837 __netif_receive_skb_one_core net/core/dev.c:5975 [inline] __netif_receive_skb+0xcc/0xac0 net/core/dev.c:6090 netif_receive_skb_internal net/core/dev.c:6176 [inline] netif_receive_skb+0x57/0x630 net/core/dev.c:6235 tun_rx_batched+0x1df/0x980 drivers/net/tun.c:1485 tun_get_user+0x4ee0/0x6b40 drivers/net/tun.c:1938 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1984 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xb4b/0x1580 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline]

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Fix missed dmabuf unpinning in error path of prepare_fb() Correct error handling in prepare_fb() to fix leaking resources when error happens.

In the Linux kernel, the following vulnerability has been resolved: clk: davinci: Add NULL check in davinci_lpsc_clk_register() devm_kasprintf() returns NULL when memory allocation fails. Currently, davinci_lpsc_clk_register() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue and ensuring no resources are left allocated.

In the Linux kernel, the following vulnerability has been resolved: media: cx231xx: set device_caps for 417 The video_device for the MPEG encoder did not set device_caps. Add this, otherwise the video device can't be registered (you get a WARN_ON instead). Not seen before since currently 417 support is disabled, but I found this while experimenting with it.

In the Linux kernel, the following vulnerability has been resolved: mm/vma: add give_up_on_oom option on modify/merge, use in uffd release Currently, if a VMA merge fails due to an OOM condition arising on commit merge or a failure to duplicate anon_vma's, we report this so the caller can handle it. However there are cases where the caller is only ostensibly trying a merge, and doesn't mind if it fails due to this condition. Since we do not want to introduce an implicit assumption that we only actually modify VMAs after OOM conditions might arise, add a 'give up on oom' option and make an explicit contract that, should this flag be set, we absolutely will not modify any VMAs should OOM arise and just bail out. Since it'd be very unusual for a user to try to vma_modify() with this flag set but be specifying a range within a VMA which ends up being split (which can fail due to rlimit issues, not only OOM), we add a debug warning for this condition. The motivating reason for this is uffd release - syzkaller (and Pedro Falcato's VERY astute analysis) found a way in which an injected fault on allocation, triggering an OOM condition on commit merge, would result in uffd code becoming confused and treating an error value as if it were a VMA pointer. To avoid this, we make use of this new VMG flag to ensure that this never occurs, utilising the fact that, should we be clearing entire VMAs, we do not wish an OOM event to be reported to us. Many thanks to Pedro Falcato for his excellent analysis and Jann Horn for his insightful and intelligent analysis of the situation, both of whom were instrumental in this fix.

In the Linux kernel, the following vulnerability has been resolved: usb: acpi: Prevent null pointer dereference in usb_acpi_add_usb4_devlink() As demonstrated by the fix for update_port_device_state, commit 12783c0b9e2c ("usb: core: Prevent null pointer dereference in update_port_device_state"), usb_hub_to_struct_hub() can return NULL in certain scenarios, such as during hub driver unbind or teardown race conditions, even if the underlying usb_device structure exists. Plus, all other places that call usb_hub_to_struct_hub() in the same file do check for NULL return values. If usb_hub_to_struct_hub() returns NULL, the subsequent access to hub->ports[udev->portnum - 1] will cause a null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var If fb_add_videomode() in do_register_framebuffer() fails to allocate memory for fb_videomode, it will later lead to a null-ptr dereference in fb_videomode_to_var(), as the fb_info is registered while not having the mode in modelist that is expected to be there, i.e. the one that is described in fb_info->var. ================================================================ general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901 Call Trace: display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929 fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071 resize_screen drivers/tty/vt/vt.c:1176 [inline] vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263 fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720 fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776 do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128 fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 ================================================================ Even though fbcon_init() checks beforehand if fb_match_mode() in var_to_display() fails, it can not prevent the panic because fbcon_init() does not return error code. Considering this and the comment in the code about fb_match_mode() returning NULL - "This should not happen" - it is better to prevent registering the fb_info if its mode was not set successfully. Also move fb_add_videomode() closer to the beginning of do_register_framebuffer() to avoid having to do the cleanup on fail. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent rename with empty string Client can send empty newname string to ksmbd server. It will cause a kernel oops from d_alloc. This patch return the error when attempting to rename a file or directory with an empty new name string.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/a7xx: Call CP_RESET_CONTEXT_STATE Calling this packet is necessary when we switch contexts because there are various pieces of state used by userspace to synchronize between BR and BV that are persistent across submits and we need to make sure that they are in a "safe" state when switching contexts. Otherwise a userspace submission in one context could cause another context to function incorrectly and hang, effectively a denial of service (although without leaking data). This was missed during initial a7xx bringup. Patchwork: https://patchwork.freedesktop.org/patch/654924/

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject %p% format string in bprintf-like helpers static const char fmt[] = "%p%"; bpf_trace_printk(fmt, sizeof(fmt)); The above BPF program isn't rejected and causes a kernel warning at runtime: Please remove unsupported %\x00 in format string WARNING: CPU: 1 PID: 7244 at lib/vsprintf.c:2680 format_decode+0x49c/0x5d0 This happens because bpf_bprintf_prepare skips over the second %, detected as punctuation, while processing %p. This patch fixes it by not skipping over punctuation. %\x00 is then processed in the next iteration and rejected.

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible infinite loop in fib6_info_uses_dev() fib6_info_uses_dev() seems to rely on RCU without an explicit protection. Like the prior fix in rt6_nlmsg_size(), we need to make sure fib6_del_route() or fib6_add_rt2node() have not removed the anchor from the list, or we risk an infinite loop.

In the Linux kernel, the following vulnerability has been resolved: tracing/osnoise: Fix crash in timerlat_dump_stack() We have observed kernel panics when using timerlat with stack saving, with the following dmesg output: memcpy: detected buffer overflow: 88 byte write of buffer size 0 WARNING: CPU: 2 PID: 8153 at lib/string_helpers.c:1032 __fortify_report+0x55/0xa0 CPU: 2 UID: 0 PID: 8153 Comm: timerlatu/2 Kdump: loaded Not tainted 6.15.3-200.fc42.x86_64 #1 PREEMPT(lazy) Call Trace: <TASK> ? trace_buffer_lock_reserve+0x2a/0x60 __fortify_panic+0xd/0xf __timerlat_dump_stack.cold+0xd/0xd timerlat_dump_stack.part.0+0x47/0x80 timerlat_fd_read+0x36d/0x390 vfs_read+0xe2/0x390 ? syscall_exit_to_user_mode+0x1d5/0x210 ksys_read+0x73/0xe0 do_syscall_64+0x7b/0x160 ? exc_page_fault+0x7e/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e __timerlat_dump_stack() constructs the ftrace stack entry like this: struct stack_entry *entry; ... memcpy(&entry->caller, fstack->calls, size); entry->size = fstack->nr_entries; Since commit e7186af7fb26 ("tracing: Add back FORTIFY_SOURCE logic to kernel_stack event structure"), struct stack_entry marks its caller field with __counted_by(size). At the time of the memcpy, entry->size contains garbage from the ringbuffer, which under some circumstances is zero, triggering a kernel panic by buffer overflow. Populate the size field before the memcpy so that the out-of-bounds check knows the correct size. This is analogous to __ftrace_trace_stack().

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Fix segfault with PEBS-via-PT with sample_freq Currently, using PEBS-via-PT with a sample frequency instead of a sample period, causes a segfault. For example: BUG: kernel NULL pointer dereference, address: 0000000000000195 <NMI> ? __die_body.cold+0x19/0x27 ? page_fault_oops+0xca/0x290 ? exc_page_fault+0x7e/0x1b0 ? asm_exc_page_fault+0x26/0x30 ? intel_pmu_pebs_event_update_no_drain+0x40/0x60 ? intel_pmu_pebs_event_update_no_drain+0x32/0x60 intel_pmu_drain_pebs_icl+0x333/0x350 handle_pmi_common+0x272/0x3c0 intel_pmu_handle_irq+0x10a/0x2e0 perf_event_nmi_handler+0x2a/0x50 That happens because intel_pmu_pebs_event_update_no_drain() assumes all the pebs_enabled bits represent counter indexes, which is not always the case. In this particular case, bits 60 and 61 are set for PEBS-via-PT purposes. The behaviour of PEBS-via-PT with sample frequency is questionable because although a PMI is generated (PEBS_PMI_AFTER_EACH_RECORD), the period is not adjusted anyway. Putting that aside, fix intel_pmu_pebs_event_update_no_drain() by passing the mask of counter bits instead of 'size'. Note, prior to the Fixes commit, 'size' would be limited to the maximum counter index, so the issue was not hit.

In the Linux kernel, the following vulnerability has been resolved: objtool, media: dib8000: Prevent divide-by-zero in dib8000_set_dds() If dib8000_set_dds()'s call to dib8000_read32() returns zero, the result is a divide-by-zero. Prevent that from happening. Fixes the following warning with an UBSAN kernel: drivers/media/dvb-frontends/dib8000.o: warning: objtool: dib8000_tune() falls through to next function dib8096p_cfg_DibRx()

In the Linux kernel, the following vulnerability has been resolved: riscv: cpu_ops_sbi: Use static array for boot_data Since commit 6b9f29b81b15 ("riscv: Enable pcpu page first chunk allocator"), if NUMA is enabled, the page percpu allocator may be used on very sparse configurations, or when requested on boot with percpu_alloc=page. In that case, percpu data gets put in the vmalloc area. However, sbi_hsm_hart_start() needs the physical address of a sbi_hart_boot_data, and simply assumes that __pa() would work. This causes the just started hart to immediately access an invalid address and hang. Fortunately, struct sbi_hart_boot_data is not too large, so we can simply allocate an array for boot_data statically, putting it in the kernel image. This fixes NUMA=y SMP boot on Sophgo SG2042. To reproduce on QEMU: Set CONFIG_NUMA=y and CONFIG_DEBUG_VIRTUAL=y, then run with: qemu-system-riscv64 -M virt -smp 2 -nographic \ -kernel arch/riscv/boot/Image \ -append "percpu_alloc=page" Kernel output: [ 0.000000] Booting Linux on hartid 0 [ 0.000000] Linux version 6.16.0-rc1 (dram@sakuya) (riscv64-unknown-linux-gnu-gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #11 SMP Tue Jun 24 14:56:22 CST 2025 ... [ 0.000000] percpu: 28 4K pages/cpu s85784 r8192 d20712 ... [ 0.083192] smp: Bringing up secondary CPUs ... [ 0.086722] ------------[ cut here ]------------ [ 0.086849] virt_to_phys used for non-linear address: (____ptrval____) (0xff2000000001d080) [ 0.088001] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:14 __virt_to_phys+0xae/0xe8 [ 0.088376] Modules linked in: [ 0.088656] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.16.0-rc1 #11 NONE [ 0.088833] Hardware name: riscv-virtio,qemu (DT) [ 0.088948] epc : __virt_to_phys+0xae/0xe8 [ 0.089001] ra : __virt_to_phys+0xae/0xe8 [ 0.089037] epc : ffffffff80021eaa ra : ffffffff80021eaa sp : ff2000000004bbc0 [ 0.089057] gp : ffffffff817f49c0 tp : ff60000001d60000 t0 : 5f6f745f74726976 [ 0.089076] t1 : 0000000000000076 t2 : 705f6f745f747269 s0 : ff2000000004bbe0 [ 0.089095] s1 : ff2000000001d080 a0 : 0000000000000000 a1 : 0000000000000000 [ 0.089113] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.089131] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 0.089155] s2 : ffffffff8130dc00 s3 : 0000000000000001 s4 : 0000000000000001 [ 0.089174] s5 : ffffffff8185eff8 s6 : ff2000007f1eb000 s7 : ffffffff8002a2ec [ 0.089193] s8 : 0000000000000001 s9 : 0000000000000001 s10: 0000000000000000 [ 0.089211] s11: 0000000000000000 t3 : ffffffff8180a9f7 t4 : ffffffff8180a9f7 [ 0.089960] t5 : ffffffff8180a9f8 t6 : ff2000000004b9d8 [ 0.089984] status: 0000000200000120 badaddr: ffffffff80021eaa cause: 0000000000000003 [ 0.090101] [<ffffffff80021eaa>] __virt_to_phys+0xae/0xe8 [ 0.090228] [<ffffffff8001d796>] sbi_cpu_start+0x6e/0xe8 [ 0.090247] [<ffffffff8001a5da>] __cpu_up+0x1e/0x8c [ 0.090260] [<ffffffff8002a32e>] bringup_cpu+0x42/0x258 [ 0.090277] [<ffffffff8002914c>] cpuhp_invoke_callback+0xe0/0x40c [ 0.090292] [<ffffffff800294e0>] __cpuhp_invoke_callback_range+0x68/0xfc [ 0.090320] [<ffffffff8002a96a>] _cpu_up+0x11a/0x244 [ 0.090334] [<ffffffff8002aae6>] cpu_up+0x52/0x90 [ 0.090384] [<ffffffff80c09350>] bringup_nonboot_cpus+0x78/0x118 [ 0.090411] [<ffffffff80c11060>] smp_init+0x34/0xb8 [ 0.090425] [<ffffffff80c01220>] kernel_init_freeable+0x148/0x2e4 [ 0.090442] [<ffffffff80b83802>] kernel_init+0x1e/0x14c [ 0.090455] [<ffffffff800124ca>] ret_from_fork_kernel+0xe/0xf0 [ 0.090471] [<ffffffff80b8d9c2>] ret_from_fork_kernel_asm+0x16/0x18 [ 0.090560] ---[ end trace 0000000000000000 ]--- [ 1.179875] CPU1: failed to come online [ 1.190324] smp: Brought up 1 node, 1 CPU

In the Linux kernel, the following vulnerability has been resolved: lib/iov_iter: fix to increase non slab folio refcount When testing EROFS file-backed mount over v9fs on qemu, I encountered a folio UAF issue. The page sanity check reports the following call trace. The root cause is that pages in bvec are coalesced across a folio bounary. The refcount of all non-slab folios should be increased to ensure p9_releas_pages can put them correctly. BUG: Bad page state in process md5sum pfn:18300 page: refcount:0 mapcount:0 mapping:00000000d5ad8e4e index:0x60 pfn:0x18300 head: order:0 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 aops:z_erofs_aops ino:30b0f dentry name(?):"GoogleExtServicesCn.apk" flags: 0x100000000000041(locked|head|node=0|zone=1) raw: 0100000000000041 dead000000000100 dead000000000122 ffff888014b13bd0 raw: 0000000000000060 0000000000000020 00000000ffffffff 0000000000000000 head: 0100000000000041 dead000000000100 dead000000000122 ffff888014b13bd0 head: 0000000000000060 0000000000000020 00000000ffffffff 0000000000000000 head: 0100000000000000 0000000000000000 ffffffffffffffff 0000000000000000 head: 0000000000000010 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set Call Trace: dump_stack_lvl+0x53/0x70 bad_page+0xd4/0x220 __free_pages_ok+0x76d/0xf30 __folio_put+0x230/0x320 p9_release_pages+0x179/0x1f0 p9_virtio_zc_request+0xa2a/0x1230 p9_client_zc_rpc.constprop.0+0x247/0x700 p9_client_read_once+0x34d/0x810 p9_client_read+0xf3/0x150 v9fs_issue_read+0x111/0x360 netfs_unbuffered_read_iter_locked+0x927/0x1390 netfs_unbuffered_read_iter+0xa2/0xe0 vfs_iocb_iter_read+0x2c7/0x460 erofs_fileio_rq_submit+0x46b/0x5b0 z_erofs_runqueue+0x1203/0x21e0 z_erofs_readahead+0x579/0x8b0 read_pages+0x19f/0xa70 page_cache_ra_order+0x4ad/0xb80 filemap_readahead.isra.0+0xe7/0x150 filemap_get_pages+0x7aa/0x1890 filemap_read+0x320/0xc80 vfs_read+0x6c6/0xa30 ksys_read+0xf9/0x1c0 do_syscall_64+0x9e/0x1a0 entry_SYSCALL_64_after_hwframe+0x71/0x79

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix kmemleak warning for percpu hashmap Vlad Poenaru reported the following kmemleak issue: unreferenced object 0x606fd7c44ac8 (size 32): backtrace (crc 0): pcpu_alloc_noprof+0x730/0xeb0 bpf_map_alloc_percpu+0x69/0xc0 prealloc_init+0x9d/0x1b0 htab_map_alloc+0x363/0x510 map_create+0x215/0x3a0 __sys_bpf+0x16b/0x3e0 __x64_sys_bpf+0x18/0x20 do_syscall_64+0x7b/0x150 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Further investigation shows the reason is due to not 8-byte aligned store of percpu pointer in htab_elem_set_ptr(): *(void __percpu **)(l->key + key_size) = pptr; Note that the whole htab_elem alignment is 8 (for x86_64). If the key_size is 4, that means pptr is stored in a location which is 4 byte aligned but not 8 byte aligned. In mm/kmemleak.c, scan_block() scans the memory based on 8 byte stride, so it won't detect above pptr, hence reporting the memory leak. In htab_map_alloc(), we already have htab->elem_size = sizeof(struct htab_elem) + round_up(htab->map.key_size, 8); if (percpu) htab->elem_size += sizeof(void *); else htab->elem_size += round_up(htab->map.value_size, 8); So storing pptr with 8-byte alignment won't cause any problem and can fix kmemleak too. The issue can be reproduced with bpf selftest as well: 1. Enable CONFIG_DEBUG_KMEMLEAK config 2. Add a getchar() before skel destroy in test_hash_map() in prog_tests/for_each.c. The purpose is to keep map available so kmemleak can be detected. 3. run './test_progs -t for_each/hash_map &' and a kmemleak should be reported.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850 GCC_GCC_PCIE_HOT_RST is wrongly defined for WCN7850, causing kernel crash on some specific platforms. Since this register is divergent for WCN7850 and QCN9274, move it to register table to allow different definitions. Then correct the register address for WCN7850 to fix this issue. Note IPQ5332 is not affected as it is not PCIe based device. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null pointer check for get_first_active_display() The function mod_hdcp_hdcp1_enable_encryption() calls the function get_first_active_display(), but does not check its return value. The return value is a null pointer if the display list is empty. This will lead to a null pointer dereference in mod_hdcp_hdcp2_enable_encryption(). Add a null pointer check for get_first_active_display() and return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null.

In the Linux kernel, the following vulnerability has been resolved: media: cxusb: no longer judge rbuf when the write fails syzbot reported a uninit-value in cxusb_i2c_xfer. [1] Only when the write operation of usb_bulk_msg() in dvb_usb_generic_rw() succeeds and rlen is greater than 0, the read operation of usb_bulk_msg() will be executed to read rlen bytes of data from the dvb device into the rbuf. In this case, although rlen is 1, the write operation failed which resulted in the dvb read operation not being executed, and ultimately variable i was not initialized. [1] BUG: KMSAN: uninit-value in cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] BUG: KMSAN: uninit-value in cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 __i2c_transfer+0xe25/0x3150 drivers/i2c/i2c-core-base.c:-1 i2c_transfer+0x317/0x4a0 drivers/i2c/i2c-core-base.c:2315 i2c_transfer_buffer_flags+0x125/0x1e0 drivers/i2c/i2c-core-base.c:2343 i2c_master_send include/linux/i2c.h:109 [inline] i2cdev_write+0x210/0x280 drivers/i2c/i2c-dev.c:183 do_loop_readv_writev fs/read_write.c:848 [inline] vfs_writev+0x963/0x14e0 fs/read_write.c:1057 do_writev+0x247/0x5c0 fs/read_write.c:1101 __do_sys_writev fs/read_write.c:1169 [inline] __se_sys_writev fs/read_write.c:1166 [inline] __x64_sys_writev+0x98/0xe0 fs/read_write.c:1166 x64_sys_call+0x2229/0x3c80 arch/x86/include/generated/asm/syscalls_64.h:21 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix the inode leak in btrfs_iget() [BUG] There is a bug report that a syzbot reproducer can lead to the following busy inode at unmount time: BTRFS info (device loop1): last unmount of filesystem 1680000e-3c1e-4c46-84b6-56bd3909af50 VFS: Busy inodes after unmount of loop1 (btrfs) ------------[ cut here ]------------ kernel BUG at fs/super.c:650! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 48168 Comm: syz-executor Not tainted 6.15.0-rc2-00471-g119009db2674 #2 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:generic_shutdown_super+0x2e9/0x390 fs/super.c:650 Call Trace: <TASK> kill_anon_super+0x3a/0x60 fs/super.c:1237 btrfs_kill_super+0x3b/0x50 fs/btrfs/super.c:2099 deactivate_locked_super+0xbe/0x1a0 fs/super.c:473 deactivate_super fs/super.c:506 [inline] deactivate_super+0xe2/0x100 fs/super.c:502 cleanup_mnt+0x21f/0x440 fs/namespace.c:1435 task_work_run+0x14d/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x269/0x290 kernel/entry/common.c:218 do_syscall_64+0xd4/0x250 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> [CAUSE] When btrfs_alloc_path() failed, btrfs_iget() directly returned without releasing the inode already allocated by btrfs_iget_locked(). This results the above busy inode and trigger the kernel BUG. [FIX] Fix it by calling iget_failed() if btrfs_alloc_path() failed. If we hit error inside btrfs_read_locked_inode(), it will properly call iget_failed(), so nothing to worry about. Although the iget_failed() cleanup inside btrfs_read_locked_inode() is a break of the normal error handling scheme, let's fix the obvious bug and backport first, then rework the error handling later.

In the Linux kernel, the following vulnerability has been resolved: iio: light: opt3001: fix deadlock due to concurrent flag access The threaded IRQ function in this driver is reading the flag twice: once to lock a mutex and once to unlock it. Even though the code setting the flag is designed to prevent it, there are subtle cases where the flag could be true at the mutex_lock stage and false at the mutex_unlock stage. This results in the mutex not being unlocked, resulting in a deadlock. Fix it by making the opt3001_irq() code generally more robust, reading the flag into a variable and using the variable value at both stages.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Fix error pointers in dpu_plane_virtual_atomic_check The function dpu_plane_virtual_atomic_check was dereferencing pointers returned by drm_atomic_get_plane_state without checking for errors. This could lead to undefined behavior if the function returns an error pointer. This commit adds checks using IS_ERR to ensure that plane_state is valid before dereferencing them. Similar to commit da29abe71e16 ("drm/amd/display: Fix error pointers in amdgpu_dm_crtc_mem_type_changed"). Patchwork: https://patchwork.freedesktop.org/patch/643132/

In the Linux kernel, the following vulnerability has been resolved: orangefs: Do not truncate file size 'len' is used to store the result of i_size_read(), so making 'len' a size_t results in truncation to 4GiB on 32-bit systems.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix a fence leak in submit error path In error paths, we could unref the submit without calling drm_sched_entity_push_job(), so msm_job_free() will never get called. Since drm_sched_job_cleanup() will NULL out the s_fence, we can use that to detect this case. Patchwork: https://patchwork.freedesktop.org/patch/653584/

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Kill timer properly at removal The USB-audio MIDI code initializes the timer, but in a rare case, the driver might be freed without the disconnect call. This leaves the timer in an active state while the assigned object is released via snd_usbmidi_free(), which ends up with a kernel warning when the debug configuration is enabled, as spotted by fuzzer. For avoiding the problem, put timer_shutdown_sync() at snd_usbmidi_free(), so that the timer can be killed properly. While we're at it, replace the existing timer_delete_sync() at the disconnect callback with timer_shutdown_sync(), too.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: handle amdgpu_cgs_create_device() errors in amd_powerplay_create() Add error handling to propagate amdgpu_cgs_create_device() failures to the caller. When amdgpu_cgs_create_device() fails, release hwmgr and return -ENOMEM to prevent null pointer dereference. [v1]->[v2]: Change error code from -EINVAL to -ENOMEM. Free hwmgr.

In the Linux kernel, the following vulnerability has been resolved: net_sched: hfsc: Address reentrant enqueue adding class to eltree twice Savino says: "We are writing to report that this recent patch (141d34391abbb315d68556b7c67ad97885407547) [1] can be bypassed, and a UAF can still occur when HFSC is utilized with NETEM. The patch only checks the cl->cl_nactive field to determine whether it is the first insertion or not [2], but this field is only incremented by init_vf [3]. By using HFSC_RSC (which uses init_ed) [4], it is possible to bypass the check and insert the class twice in the eltree. Under normal conditions, this would lead to an infinite loop in hfsc_dequeue for the reasons we already explained in this report [5]. However, if TBF is added as root qdisc and it is configured with a very low rate, it can be utilized to prevent packets from being dequeued. This behavior can be exploited to perform subsequent insertions in the HFSC eltree and cause a UAF." To fix both the UAF and the infinite loop, with netem as an hfsc child, check explicitly in hfsc_enqueue whether the class is already in the eltree whenever the HFSC_RSC flag is set. [1] https://web.git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=141d34391abbb315d68556b7c67ad97885407547 [2] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L1572 [3] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L677 [4] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L1574 [5] https://lore.kernel.org/netdev/8DuRWwfqjoRDLDmBMlIfbrsZg9Gx50DHJc1ilxsEBNe2D6NMoigR_eIRIG0LOjMc3r10nUUZtArXx4oZBIdUfZQrwjcQhdinnMis_0G7VEk=@willsroot.io/T/#u

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value. When generating the MSR_IA32_PEBS_ENABLE value that will be loaded on VM-Entry to a KVM guest, mask the value with the vCPU's desired PEBS_ENABLE value. Consulting only the host kernel's host vs. guest masks results in running the guest with PEBS enabled even when the guest doesn't want to use PEBS. Because KVM uses perf events to proxy the guest virtual PMU, simply looking at exclude_host can't differentiate between events created by host userspace, and events created by KVM on behalf of the guest. Running the guest with PEBS unexpectedly enabled typically manifests as crashes due to a near-infinite stream of #PFs. E.g. if the guest hasn't written MSR_IA32_DS_AREA, the CPU will hit page faults on address '0' when trying to record PEBS events. The issue is most easily reproduced by running `perf kvm top` from before commit 7b100989b4f6 ("perf evlist: Remove __evlist__add_default") (after which, `perf kvm top` effectively stopped using PEBS). The userspace side of perf creates a guest-only PEBS event, which intel_guest_get_msrs() misconstrues a guest-*owned* PEBS event. Arguably, this is a userspace bug, as enabling PEBS on guest-only events simply cannot work, and userspace can kill VMs in many other ways (there is no danger to the host). However, even if this is considered to be bad userspace behavior, there's zero downside to perf/KVM restricting PEBS to guest-owned events. Note, commit 854250329c02 ("KVM: x86/pmu: Disable guest PEBS temporarily in two rare situations") fixed the case where host userspace is profiling KVM *and* userspace, but missed the case where userspace is profiling only KVM.

In the Linux kernel, the following vulnerability has been resolved: gfs2: No more self recovery When a node withdraws and it turns out that it is the only node that has the filesystem mounted, gfs2 currently tries to replay the local journal to bring the filesystem back into a consistent state. Not only is that a very bad idea, it has also never worked because gfs2_recover_func() will refuse to do anything during a withdraw. However, before even getting to this point, gfs2_recover_func() dereferences sdp->sd_jdesc->jd_inode. This was a use-after-free before commit 04133b607a78 ("gfs2: Prevent double iput for journal on error") and is a NULL pointer dereference since then. Simply get rid of self recovery to fix that.

In the Linux kernel, the following vulnerability has been resolved: jffs2: check that raw node were preallocated before writing summary Syzkaller detected a kernel bug in jffs2_link_node_ref, caused by fault injection in jffs2_prealloc_raw_node_refs. jffs2_sum_write_sumnode doesn't check return value of jffs2_prealloc_raw_node_refs and simply lets any error propagate into jffs2_sum_write_data, which eventually calls jffs2_link_node_ref in order to link the summary to an expectedly allocated node. kernel BUG at fs/jffs2/nodelist.c:592! invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 1 PID: 31277 Comm: syz-executor.7 Not tainted 6.1.128-syzkaller-00139-ge10f83ca10a1 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:jffs2_link_node_ref+0x570/0x690 fs/jffs2/nodelist.c:592 Call Trace: <TASK> jffs2_sum_write_data fs/jffs2/summary.c:841 [inline] jffs2_sum_write_sumnode+0xd1a/0x1da0 fs/jffs2/summary.c:874 jffs2_do_reserve_space+0xa18/0xd60 fs/jffs2/nodemgmt.c:388 jffs2_reserve_space+0x55f/0xaa0 fs/jffs2/nodemgmt.c:197 jffs2_write_inode_range+0x246/0xb50 fs/jffs2/write.c:362 jffs2_write_end+0x726/0x15d0 fs/jffs2/file.c:301 generic_perform_write+0x314/0x5d0 mm/filemap.c:3856 __generic_file_write_iter+0x2ae/0x4d0 mm/filemap.c:3973 generic_file_write_iter+0xe3/0x350 mm/filemap.c:4005 call_write_iter include/linux/fs.h:2265 [inline] do_iter_readv_writev+0x20f/0x3c0 fs/read_write.c:735 do_iter_write+0x186/0x710 fs/read_write.c:861 vfs_iter_write+0x70/0xa0 fs/read_write.c:902 iter_file_splice_write+0x73b/0xc90 fs/splice.c:685 do_splice_from fs/splice.c:763 [inline] direct_splice_actor+0x10c/0x170 fs/splice.c:950 splice_direct_to_actor+0x337/0xa10 fs/splice.c:896 do_splice_direct+0x1a9/0x280 fs/splice.c:1002 do_sendfile+0xb13/0x12c0 fs/read_write.c:1255 __do_sys_sendfile64 fs/read_write.c:1323 [inline] __se_sys_sendfile64 fs/read_write.c:1309 [inline] __x64_sys_sendfile64+0x1cf/0x210 fs/read_write.c:1309 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Fix this issue by checking return value of jffs2_prealloc_raw_node_refs before calling jffs2_sum_write_data. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage() The function brcmf_usb_dl_writeimage() calls the function brcmf_usb_dl_cmd() but dose not check its return value. The 'state.state' and the 'state.bytes' are uninitialized if the function brcmf_usb_dl_cmd() fails. It is dangerous to use uninitialized variables in the conditions. Add error handling for brcmf_usb_dl_cmd() to jump to error handling path if the brcmf_usb_dl_cmd() fails and the 'state.state' and the 'state.bytes' are uninitialized. Improve the error message to report more detailed error information.

In the Linux kernel, the following vulnerability has been resolved: riscv: save the SR_SUM status over switches When threads/tasks are switched we need to ensure the old execution's SR_SUM state is saved and the new thread has the old SR_SUM state restored. The issue was seen under heavy load especially with the syz-stress tool running, with crashes as follows in schedule_tail: Unable to handle kernel access to user memory without uaccess routines at virtual address 000000002749f0d0 Oops [#1] Modules linked in: CPU: 1 PID: 4875 Comm: syz-executor.0 Not tainted 5.12.0-rc2-syzkaller-00467-g0d7588ab9ef9 #0 Hardware name: riscv-virtio,qemu (DT) epc : schedule_tail+0x72/0xb2 kernel/sched/core.c:4264 ra : task_pid_vnr include/linux/sched.h:1421 [inline] ra : schedule_tail+0x70/0xb2 kernel/sched/core.c:4264 epc : ffffffe00008c8b0 ra : ffffffe00008c8ae sp : ffffffe025d17ec0 gp : ffffffe005d25378 tp : ffffffe00f0d0000 t0 : 0000000000000000 t1 : 0000000000000001 t2 : 00000000000f4240 s0 : ffffffe025d17ee0 s1 : 000000002749f0d0 a0 : 000000000000002a a1 : 0000000000000003 a2 : 1ffffffc0cfac500 a3 : ffffffe0000c80cc a4 : 5ae9db91c19bbe00 a5 : 0000000000000000 a6 : 0000000000f00000 a7 : ffffffe000082eba s2 : 0000000000040000 s3 : ffffffe00eef96c0 s4 : ffffffe022c77fe0 s5 : 0000000000004000 s6 : ffffffe067d74e00 s7 : ffffffe067d74850 s8 : ffffffe067d73e18 s9 : ffffffe067d74e00 s10: ffffffe00eef96e8 s11: 000000ae6cdf8368 t3 : 5ae9db91c19bbe00 t4 : ffffffc4043cafb2 t5 : ffffffc4043cafba t6 : 0000000000040000 status: 0000000000000120 badaddr: 000000002749f0d0 cause: 000000000000000f Call Trace: [<ffffffe00008c8b0>] schedule_tail+0x72/0xb2 kernel/sched/core.c:4264 [<ffffffe000005570>] ret_from_exception+0x0/0x14 Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace b5f8f9231dc87dda ]--- The issue comes from the put_user() in schedule_tail (kernel/sched/core.c) doing the following: asmlinkage __visible void schedule_tail(struct task_struct *prev) { ... if (current->set_child_tid) put_user(task_pid_vnr(current), current->set_child_tid); ... } the put_user() macro causes the code sequence to come out as follows: 1: __enable_user_access() 2: reg = task_pid_vnr(current); 3: *current->set_child_tid = reg; 4: __disable_user_access() The problem is that we may have a sleeping function as argument which could clear SR_SUM causing the panic above. This was fixed by evaluating the argument of the put_user() macro outside the user-enabled section in commit 285a76bb2cf5 ("riscv: evaluate put_user() arg before enabling user access")" In order for riscv to take advantage of unsafe_get/put_XXX() macros and to avoid the same issue we had with put_user() and sleeping functions we must ensure code flow can go through switch_to() from within a region of code with SR_SUM enabled and come back with SR_SUM still enabled. This patch addresses the problem allowing future work to enable full use of unsafe_get/put_XXX() macros without needing to take a CSR bit flip cost on every access. Make switch_to() save and restore SR_SUM.

In the Linux kernel, the following vulnerability has been resolved: Input: gpio-keys - fix a sleep while atomic with PREEMPT_RT When enabling PREEMPT_RT, the gpio_keys_irq_timer() callback runs in hard irq context, but the input_event() takes a spin_lock, which isn't allowed there as it is converted to a rt_spin_lock(). [ 4054.289999] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 4054.290028] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/0 ... [ 4054.290195] __might_resched+0x13c/0x1f4 [ 4054.290209] rt_spin_lock+0x54/0x11c [ 4054.290219] input_event+0x48/0x80 [ 4054.290230] gpio_keys_irq_timer+0x4c/0x78 [ 4054.290243] __hrtimer_run_queues+0x1a4/0x438 [ 4054.290257] hrtimer_interrupt+0xe4/0x240 [ 4054.290269] arch_timer_handler_phys+0x2c/0x44 [ 4054.290283] handle_percpu_devid_irq+0x8c/0x14c [ 4054.290297] handle_irq_desc+0x40/0x58 [ 4054.290307] generic_handle_domain_irq+0x1c/0x28 [ 4054.290316] gic_handle_irq+0x44/0xcc Considering the gpio_keys_irq_isr() can run in any context, e.g. it can be threaded, it seems there's no point in requesting the timer isr to run in hard irq context. Relax the hrtimer not to use the hard context.

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix crash when rebind ccp device for ccp.ko When CONFIG_CRYPTO_DEV_CCP_DEBUGFS is enabled, rebinding the ccp device causes the following crash: $ echo '0000:0a:00.2' > /sys/bus/pci/drivers/ccp/unbind $ echo '0000:0a:00.2' > /sys/bus/pci/drivers/ccp/bind [ 204.976930] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ 204.978026] #PF: supervisor write access in kernel mode [ 204.979126] #PF: error_code(0x0002) - not-present page [ 204.980226] PGD 0 P4D 0 [ 204.981317] Oops: Oops: 0002 [#1] SMP NOPTI ... [ 204.997852] Call Trace: [ 204.999074] <TASK> [ 205.000297] start_creating+0x9f/0x1c0 [ 205.001533] debugfs_create_dir+0x1f/0x170 [ 205.002769] ? srso_return_thunk+0x5/0x5f [ 205.004000] ccp5_debugfs_setup+0x87/0x170 [ccp] [ 205.005241] ccp5_init+0x8b2/0x960 [ccp] [ 205.006469] ccp_dev_init+0xd4/0x150 [ccp] [ 205.007709] sp_init+0x5f/0x80 [ccp] [ 205.008942] sp_pci_probe+0x283/0x2e0 [ccp] [ 205.010165] ? srso_return_thunk+0x5/0x5f [ 205.011376] local_pci_probe+0x4f/0xb0 [ 205.012584] pci_device_probe+0xdb/0x230 [ 205.013810] really_probe+0xed/0x380 [ 205.015024] __driver_probe_device+0x7e/0x160 [ 205.016240] device_driver_attach+0x2f/0x60 [ 205.017457] bind_store+0x7c/0xb0 [ 205.018663] drv_attr_store+0x28/0x40 [ 205.019868] sysfs_kf_write+0x5f/0x70 [ 205.021065] kernfs_fop_write_iter+0x145/0x1d0 [ 205.022267] vfs_write+0x308/0x440 [ 205.023453] ksys_write+0x6d/0xe0 [ 205.024616] __x64_sys_write+0x1e/0x30 [ 205.025778] x64_sys_call+0x16ba/0x2150 [ 205.026942] do_syscall_64+0x56/0x1e0 [ 205.028108] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 205.029276] RIP: 0033:0x7fbc36f10104 [ 205.030420] Code: 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8d 05 e1 08 2e 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 41 54 55 49 89 d4 53 48 89 f5 This patch sets ccp_debugfs_dir to NULL after destroying it in ccp5_debugfs_destroy, allowing the directory dentry to be recreated when rebinding the ccp device. Tested on AMD Ryzen 7 1700X.

In the Linux kernel, the following vulnerability has been resolved: comedi: Fail COMEDI_INSNLIST ioctl if n_insns is too large The handling of the `COMEDI_INSNLIST` ioctl allocates a kernel buffer to hold the array of `struct comedi_insn`, getting the length from the `n_insns` member of the `struct comedi_insnlist` supplied by the user. The allocation will fail with a WARNING and a stack dump if it is too large. Avoid that by failing with an `-EINVAL` error if the supplied `n_insns` value is unreasonable. Define the limit on the `n_insns` value in the `MAX_INSNS` macro. Set this to the same value as `MAX_SAMPLES` (65536), which is the maximum allowed sum of the values of the member `n` in the array of `struct comedi_insn`, and sensible comedi instructions will have an `n` of at least 1.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell_rbu: Fix list usage Pass the correct list head to list_for_each_entry*() when looping through the packet list. Without this patch, reading the packet data via sysfs will show the data incorrectly (because it starts at the wrong packet), and clearing the packet list will result in a NULL pointer dereference.