In the Linux kernel, the following vulnerability has been resolved: block: avoid possible overflow for chunk_sectors check in blk_stack_limits() In blk_stack_limits(), we check that the t->chunk_sectors value is a multiple of the t->physical_block_size value. However, by finding the chunk_sectors value in bytes, we may overflow the unsigned int which holds chunk_sectors, so change the check to be based on sectors.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix recursive locking in RPC handle list access Since commit 305853cce3794 ("ksmbd: Fix race condition in RPC handle list access"), ksmbd_session_rpc_method() attempts to lock sess->rpc_lock. This causes hung connections / tasks when a client attempts to open a named pipe. Using Samba's rpcclient tool: $ rpcclient //192.168.1.254 -U user%password $ rpcclient $> srvinfo <connection hung here> Kernel side: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/0:0 state:D stack:0 pid:5021 tgid:5021 ppid:2 flags:0x00200000 Workqueue: ksmbd-io handle_ksmbd_work Call trace: __schedule from schedule+0x3c/0x58 schedule from schedule_preempt_disabled+0xc/0x10 schedule_preempt_disabled from rwsem_down_read_slowpath+0x1b0/0x1d8 rwsem_down_read_slowpath from down_read+0x28/0x30 down_read from ksmbd_session_rpc_method+0x18/0x3c ksmbd_session_rpc_method from ksmbd_rpc_open+0x34/0x68 ksmbd_rpc_open from ksmbd_session_rpc_open+0x194/0x228 ksmbd_session_rpc_open from create_smb2_pipe+0x8c/0x2c8 create_smb2_pipe from smb2_open+0x10c/0x27ac smb2_open from handle_ksmbd_work+0x238/0x3dc handle_ksmbd_work from process_scheduled_works+0x160/0x25c process_scheduled_works from worker_thread+0x16c/0x1e8 worker_thread from kthread+0xa8/0xb8 kthread from ret_from_fork+0x14/0x38 Exception stack(0x8529ffb0 to 0x8529fff8) The task deadlocks because the lock is already held: ksmbd_session_rpc_open down_write(&sess->rpc_lock) ksmbd_rpc_open ksmbd_session_rpc_method down_read(&sess->rpc_lock) <-- deadlock Adjust ksmbd_session_rpc_method() callers to take the lock when necessary.

In the Linux kernel, the following vulnerability has been resolved: nbd: fix incomplete validation of ioctl arg We tested and found an alarm caused by nbd_ioctl arg without verification. The UBSAN warning calltrace like below: UBSAN: Undefined behaviour in fs/buffer.c:1709:35 signed integer overflow: -9223372036854775808 - 1 cannot be represented in type 'long long int' CPU: 3 PID: 2523 Comm: syz-executor.0 Not tainted 4.19.90 #1 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x3f0 arch/arm64/kernel/time.c:78 show_stack+0x28/0x38 arch/arm64/kernel/traps.c:158 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x170/0x1dc lib/dump_stack.c:118 ubsan_epilogue+0x18/0xb4 lib/ubsan.c:161 handle_overflow+0x188/0x1dc lib/ubsan.c:192 __ubsan_handle_sub_overflow+0x34/0x44 lib/ubsan.c:206 __block_write_full_page+0x94c/0xa20 fs/buffer.c:1709 block_write_full_page+0x1f0/0x280 fs/buffer.c:2934 blkdev_writepage+0x34/0x40 fs/block_dev.c:607 __writepage+0x68/0xe8 mm/page-writeback.c:2305 write_cache_pages+0x44c/0xc70 mm/page-writeback.c:2240 generic_writepages+0xdc/0x148 mm/page-writeback.c:2329 blkdev_writepages+0x2c/0x38 fs/block_dev.c:2114 do_writepages+0xd4/0x250 mm/page-writeback.c:2344 The reason for triggering this warning is __block_write_full_page() -> i_size_read(inode) - 1 overflow. inode->i_size is assigned in __nbd_ioctl() -> nbd_set_size() -> bytesize. We think it is necessary to limit the size of arg to prevent errors. Moreover, __nbd_ioctl() -> nbd_add_socket(), arg will be cast to int. Assuming the value of arg is 0x80000000000000001) (on a 64-bit machine), it will become 1 after the coercion, which will return unexpected results. Fix it by adding checks to prevent passing in too large numbers.

In the Linux kernel, the following vulnerability has been resolved: tracing/osnoise: Fix crash in timerlat_dump_stack() We have observed kernel panics when using timerlat with stack saving, with the following dmesg output: memcpy: detected buffer overflow: 88 byte write of buffer size 0 WARNING: CPU: 2 PID: 8153 at lib/string_helpers.c:1032 __fortify_report+0x55/0xa0 CPU: 2 UID: 0 PID: 8153 Comm: timerlatu/2 Kdump: loaded Not tainted 6.15.3-200.fc42.x86_64 #1 PREEMPT(lazy) Call Trace: <TASK> ? trace_buffer_lock_reserve+0x2a/0x60 __fortify_panic+0xd/0xf __timerlat_dump_stack.cold+0xd/0xd timerlat_dump_stack.part.0+0x47/0x80 timerlat_fd_read+0x36d/0x390 vfs_read+0xe2/0x390 ? syscall_exit_to_user_mode+0x1d5/0x210 ksys_read+0x73/0xe0 do_syscall_64+0x7b/0x160 ? exc_page_fault+0x7e/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e __timerlat_dump_stack() constructs the ftrace stack entry like this: struct stack_entry *entry; ... memcpy(&entry->caller, fstack->calls, size); entry->size = fstack->nr_entries; Since commit e7186af7fb26 ("tracing: Add back FORTIFY_SOURCE logic to kernel_stack event structure"), struct stack_entry marks its caller field with __counted_by(size). At the time of the memcpy, entry->size contains garbage from the ringbuffer, which under some circumstances is zero, triggering a kernel panic by buffer overflow. Populate the size field before the memcpy so that the out-of-bounds check knows the correct size. This is analogous to __ftrace_trace_stack().

In the Linux kernel, the following vulnerability has been resolved: eventpoll: Fix semi-unbounded recursion Ensure that epoll instances can never form a graph deeper than EP_MAX_NESTS+1 links. Currently, ep_loop_check_proc() ensures that the graph is loop-free and does some recursion depth checks, but those recursion depth checks don't limit the depth of the resulting tree for two reasons: - They don't look upwards in the tree. - If there are multiple downwards paths of different lengths, only one of the paths is actually considered for the depth check since commit 28d82dc1c4ed ("epoll: limit paths"). Essentially, the current recursion depth check in ep_loop_check_proc() just serves to prevent it from recursing too deeply while checking for loops. A more thorough check is done in reverse_path_check() after the new graph edge has already been created; this checks, among other things, that no paths going upwards from any non-epoll file with a length of more than 5 edges exist. However, this check does not apply to non-epoll files. As a result, it is possible to recurse to a depth of at least roughly 500, tested on v6.15. (I am unsure if deeper recursion is possible; and this may have changed with commit 8c44dac8add7 ("eventpoll: Fix priority inversion problem").) To fix it: 1. In ep_loop_check_proc(), note the subtree depth of each visited node, and use subtree depths for the total depth calculation even when a subtree has already been visited. 2. Add ep_get_upwards_depth_proc() for similarly determining the maximum depth of an upwards walk. 3. In ep_loop_check(), use these values to limit the total path length between epoll nodes to EP_MAX_NESTS edges.

In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest() In commit 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C") kvm_start_guest() became idle_kvm_start_guest(). The old code allocated a stack frame on the emergency stack, but didn't use the frame to store anything, and also didn't store anything in its caller's frame. idle_kvm_start_guest() on the other hand is written more like a normal C function, it creates a frame on entry, and also stores CR/LR into its callers frame (per the ABI). The problem is that there is no caller frame on the emergency stack. The emergency stack for a given CPU is allocated with: paca_ptrs[i]->emergency_sp = alloc_stack(limit, i) + THREAD_SIZE; So emergency_sp actually points to the first address above the emergency stack allocation for a given CPU, we must not store above it without first decrementing it to create a frame. This is different to the regular kernel stack, paca->kstack, which is initialised to point at an initial frame that is ready to use. idle_kvm_start_guest() stores the backchain, CR and LR all of which write outside the allocation for the emergency stack. It then creates a stack frame and saves the non-volatile registers. Unfortunately the frame it creates is not large enough to fit the non-volatiles, and so the saving of the non-volatile registers also writes outside the emergency stack allocation. The end result is that we corrupt whatever is at 0-24 bytes, and 112-248 bytes above the emergency stack allocation. In practice this has gone unnoticed because the memory immediately above the emergency stack happens to be used for other stack allocations, either another CPUs mc_emergency_sp or an IRQ stack. See the order of calls to irqstack_early_init() and emergency_stack_init(). The low addresses of another stack are the top of that stack, and so are only used if that stack is under extreme pressue, which essentially never happens in practice - and if it did there's a high likelyhood we'd crash due to that stack overflowing. Still, we shouldn't be corrupting someone else's stack, and it is purely luck that we aren't corrupting something else. To fix it we save CR/LR into the caller's frame using the existing r1 on entry, we then create a SWITCH_FRAME_SIZE frame (which has space for pt_regs) on the emergency stack with the backchain pointing to the existing stack, and then finally we switch to the new frame on the emergency stack.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Fix stack protector issue in send_ipi_data() Function kvm_io_bus_read() is called in function send_ipi_data(), buffer size of parameter *val should be at least 8 bytes. Since some emulation functions like loongarch_ipi_readl() and kvm_eiointc_read() will write the buffer *val with 8 bytes signed extension regardless parameter len. Otherwise there will be buffer overflow issue when CONFIG_STACKPROTECTOR is enabled. The bug report is shown as follows: Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: send_ipi_data+0x194/0x1a0 [kvm] CPU: 11 UID: 107 PID: 2692 Comm: CPU 0/KVM Not tainted 6.17.0-rc1+ #102 PREEMPT(full) Stack : 9000000005901568 0000000000000000 9000000003af371c 900000013c68c000 900000013c68f850 900000013c68f858 0000000000000000 900000013c68f998 900000013c68f990 900000013c68f990 900000013c68f6c0 fffffffffffdb058 fffffffffffdb0e0 900000013c68f858 911e1d4d39cf0ec2 9000000105657a00 0000000000000001 fffffffffffffffe 0000000000000578 282049464555206e 6f73676e6f6f4c20 0000000000000001 00000000086b4000 0000000000000000 0000000000000000 0000000000000000 9000000005709968 90000000058f9000 900000013c68fa68 900000013c68fab4 90000000029279f0 900000010153f940 900000010001f360 0000000000000000 9000000003af3734 000000004390000c 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1d ... Call Trace: [<9000000003af3734>] show_stack+0x5c/0x180 [<9000000003aed168>] dump_stack_lvl+0x6c/0x9c [<9000000003ad0ab0>] vpanic+0x108/0x2c4 [<9000000003ad0ca8>] panic+0x3c/0x40 [<9000000004eb0a1c>] __stack_chk_fail+0x14/0x18 [<ffff8000023473f8>] send_ipi_data+0x190/0x1a0 [kvm] [<ffff8000023313e4>] __kvm_io_bus_write+0xa4/0xe8 [kvm] [<ffff80000233147c>] kvm_io_bus_write+0x54/0x90 [kvm] [<ffff80000233f9f8>] kvm_emu_iocsr+0x180/0x310 [kvm] [<ffff80000233fe08>] kvm_handle_gspr+0x280/0x478 [kvm] [<ffff8000023443e8>] kvm_handle_exit+0xc0/0x130 [kvm]

An issue was discovered in the Linux kernel before 5.8. lib/nlattr.c allows attackers to cause a denial of service (unbounded recursion) via a nested Netlink policy with a back reference.

In the Linux kernel, the following vulnerability has been resolved: powerpc/perf: Optimize clearing the pending PMI and remove WARN_ON for PMI check in power_pmu_disable commit 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC") added a new function "pmi_irq_pending" in hw_irq.h. This function is to check if there is a PMI marked as pending in Paca (PACA_IRQ_PMI).This is used in power_pmu_disable in a WARN_ON. The intention here is to provide a warning if there is PMI pending, but no counter is found overflown. During some of the perf runs, below warning is hit: WARNING: CPU: 36 PID: 0 at arch/powerpc/perf/core-book3s.c:1332 power_pmu_disable+0x25c/0x2c0 Modules linked in: ----- NIP [c000000000141c3c] power_pmu_disable+0x25c/0x2c0 LR [c000000000141c8c] power_pmu_disable+0x2ac/0x2c0 Call Trace: [c000000baffcfb90] [c000000000141c8c] power_pmu_disable+0x2ac/0x2c0 (unreliable) [c000000baffcfc10] [c0000000003e2f8c] perf_pmu_disable+0x4c/0x60 [c000000baffcfc30] [c0000000003e3344] group_sched_out.part.124+0x44/0x100 [c000000baffcfc80] [c0000000003e353c] __perf_event_disable+0x13c/0x240 [c000000baffcfcd0] [c0000000003dd334] event_function+0xc4/0x140 [c000000baffcfd20] [c0000000003d855c] remote_function+0x7c/0xa0 [c000000baffcfd50] [c00000000026c394] flush_smp_call_function_queue+0xd4/0x300 [c000000baffcfde0] [c000000000065b24] smp_ipi_demux_relaxed+0xa4/0x100 [c000000baffcfe20] [c0000000000cb2b0] xive_muxed_ipi_action+0x20/0x40 [c000000baffcfe40] [c000000000207c3c] __handle_irq_event_percpu+0x8c/0x250 [c000000baffcfee0] [c000000000207e2c] handle_irq_event_percpu+0x2c/0xa0 [c000000baffcff10] [c000000000210a04] handle_percpu_irq+0x84/0xc0 [c000000baffcff40] [c000000000205f14] generic_handle_irq+0x54/0x80 [c000000baffcff60] [c000000000015740] __do_irq+0x90/0x1d0 [c000000baffcff90] [c000000000016990] __do_IRQ+0xc0/0x140 [c0000009732f3940] [c000000bafceaca8] 0xc000000bafceaca8 [c0000009732f39d0] [c000000000016b78] do_IRQ+0x168/0x1c0 [c0000009732f3a00] [c0000000000090c8] hardware_interrupt_common_virt+0x218/0x220 This means that there is no PMC overflown among the active events in the PMU, but there is a PMU pending in Paca. The function "any_pmc_overflown" checks the PMCs on active events in cpuhw->n_events. Code snippet: <<>> if (any_pmc_overflown(cpuhw)) clear_pmi_irq_pending(); else WARN_ON(pmi_irq_pending()); <<>> Here the PMC overflown is not from active event. Example: When we do perf record, default cycles and instructions will be running on PMC6 and PMC5 respectively. It could happen that overflowed event is currently not active and pending PMI is for the inactive event. Debug logs from trace_printk: <<>> any_pmc_overflown: idx is 5: pmc value is 0xd9a power_pmu_disable: PMC1: 0x0, PMC2: 0x0, PMC3: 0x0, PMC4: 0x0, PMC5: 0xd9a, PMC6: 0x80002011 <<>> Here active PMC (from idx) is PMC5 , but overflown PMC is PMC6(0x80002011). When we handle PMI interrupt for such cases, if the PMC overflown is from inactive event, it will be ignored. Reference commit: commit bc09c219b2e6 ("powerpc/perf: Fix finding overflowed PMC in interrupt") Patch addresses two changes: 1) Fix 1 : Removal of warning ( WARN_ON(pmi_irq_pending()); ) We were printing warning if no PMC is found overflown among active PMU events, but PMI pending in PACA. But this could happen in cases where PMC overflown is not in active PMC. An inactive event could have caused the overflow. Hence the warning is not needed. To know pending PMI is from an inactive event, we need to loop through all PMC's which will cause more SPR reads via mfspr and increase in context switch. Also in existing function: perf_event_interrupt, already we ignore PMI's overflown when it is from an inactive PMC. 2) Fix 2: optimization in clearing pending PMI. Currently we check for any active PMC overflown before clearing PMI pending in Paca. This is causing additional SP ---truncated---

In the Linux kernel, the following vulnerability has been resolved: riscv: VMAP_STACK overflow detection thread-safe commit 31da94c25aea ("riscv: add VMAP_STACK overflow detection") added support for CONFIG_VMAP_STACK. If overflow is detected, CPU switches to `shadow_stack` temporarily before switching finally to per-cpu `overflow_stack`. If two CPUs/harts are racing and end up in over flowing kernel stack, one or both will end up corrupting each other state because `shadow_stack` is not per-cpu. This patch optimizes per-cpu overflow stack switch by directly picking per-cpu `overflow_stack` and gets rid of `shadow_stack`. Following are the changes in this patch - Defines an asm macro to obtain per-cpu symbols in destination register. - In entry.S, when overflow is detected, per-cpu overflow stack is located using per-cpu asm macro. Computing per-cpu symbol requires a temporary register. x31 is saved away into CSR_SCRATCH (CSR_SCRATCH is anyways zero since we're in kernel). Please see Links for additional relevant disccussion and alternative solution. Tested by `echo EXHAUST_STACK > /sys/kernel/debug/provoke-crash/DIRECT` Kernel crash log below Insufficient stack space to handle exception!/debug/provoke-crash/DIRECT Task stack: [0xff20000010a98000..0xff20000010a9c000] Overflow stack: [0xff600001f7d98370..0xff600001f7d99370] CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34 Hardware name: riscv-virtio,qemu (DT) epc : __memset+0x60/0xfc ra : recursive_loop+0x48/0xc6 [lkdtm] epc : ffffffff808de0e4 ra : ffffffff0163a752 sp : ff20000010a97e80 gp : ffffffff815c0330 tp : ff600000820ea280 t0 : ff20000010a97e88 t1 : 000000000000002e t2 : 3233206874706564 s0 : ff20000010a982b0 s1 : 0000000000000012 a0 : ff20000010a97e88 a1 : 0000000000000000 a2 : 0000000000000400 a3 : ff20000010a98288 a4 : 0000000000000000 a5 : 0000000000000000 a6 : fffffffffffe43f0 a7 : 00007fffffffffff s2 : ff20000010a97e88 s3 : ffffffff01644680 s4 : ff20000010a9be90 s5 : ff600000842ba6c0 s6 : 00aaaaaac29e42b0 s7 : 00fffffff0aa3684 s8 : 00aaaaaac2978040 s9 : 0000000000000065 s10: 00ffffff8a7cad10 s11: 00ffffff8a76a4e0 t3 : ffffffff815dbaf4 t4 : ffffffff815dbaf4 t5 : ffffffff815dbab8 t6 : ff20000010a9bb48 status: 0000000200000120 badaddr: ff20000010a97e88 cause: 000000000000000f Kernel panic - not syncing: Kernel stack overflow CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34 Hardware name: riscv-virtio,qemu (DT) Call Trace: [<ffffffff80006754>] dump_backtrace+0x30/0x38 [<ffffffff808de798>] show_stack+0x40/0x4c [<ffffffff808ea2a8>] dump_stack_lvl+0x44/0x5c [<ffffffff808ea2d8>] dump_stack+0x18/0x20 [<ffffffff808dec06>] panic+0x126/0x2fe [<ffffffff800065ea>] walk_stackframe+0x0/0xf0 [<ffffffff0163a752>] recursive_loop+0x48/0xc6 [lkdtm] SMP: stopping secondary CPUs ---[ end Kernel panic - not syncing: Kernel stack overflow ]---

In the Linux kernel, the following vulnerability has been resolved: afs: Fix lock recursion afs_wake_up_async_call() can incur lock recursion. The problem is that it is called from AF_RXRPC whilst holding the ->notify_lock, but it tries to take a ref on the afs_call struct in order to pass it to a work queue - but if the afs_call is already queued, we then have an extraneous ref that must be put... calling afs_put_call() may call back down into AF_RXRPC through rxrpc_kernel_shutdown_call(), however, which might try taking the ->notify_lock again. This case isn't very common, however, so defer it to a workqueue. The oops looks something like: BUG: spinlock recursion on CPU#0, krxrpcio/7001/1646 lock: 0xffff888141399b30, .magic: dead4ead, .owner: krxrpcio/7001/1646, .owner_cpu: 0 CPU: 0 UID: 0 PID: 1646 Comm: krxrpcio/7001 Not tainted 6.12.0-rc2-build3+ #4351 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Call Trace: <TASK> dump_stack_lvl+0x47/0x70 do_raw_spin_lock+0x3c/0x90 rxrpc_kernel_shutdown_call+0x83/0xb0 afs_put_call+0xd7/0x180 rxrpc_notify_socket+0xa0/0x190 rxrpc_input_split_jumbo+0x198/0x1d0 rxrpc_input_data+0x14b/0x1e0 ? rxrpc_input_call_packet+0xc2/0x1f0 rxrpc_input_call_event+0xad/0x6b0 rxrpc_input_packet_on_conn+0x1e1/0x210 rxrpc_input_packet+0x3f2/0x4d0 rxrpc_io_thread+0x243/0x410 ? __pfx_rxrpc_io_thread+0x10/0x10 kthread+0xcf/0xe0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x24/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: fbdev: omapfb: Add 'plane' value check Function dispc_ovl_setup is not intended to work with the value OMAP_DSS_WB of the enum parameter plane. The value of this parameter is initialized in dss_init_overlays and in the current state of the code it cannot take this value so it's not a real problem. For the purposes of defensive coding it wouldn't be superfluous to check the parameter value, because some functions down the call stack process this value correctly and some not. For example, in dispc_ovl_setup_global_alpha it may lead to buffer overflow. Add check for this value. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: vsock: fix recursive ->recvmsg calls After a vsock socket has been added to a BPF sockmap, its prot->recvmsg has been replaced with vsock_bpf_recvmsg(). Thus the following recursiion could happen: vsock_bpf_recvmsg() -> __vsock_recvmsg() -> vsock_connectible_recvmsg() -> prot->recvmsg() -> vsock_bpf_recvmsg() again We need to fix it by calling the original ->recvmsg() without any BPF sockmap logic in __vsock_recvmsg().

In the Linux kernel, the following vulnerability has been resolved: powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling The recent commit 1010b4c012b0 ("powerpc/eeh: Make EEH driver device hotplug safe") restructured the EEH driver to improve synchronization with the PCI hotplug layer. However, it inadvertently moved pci_lock_rescan_remove() outside its intended scope in eeh_handle_normal_event(), leading to broken PCI error reporting and improper EEH event triggering. Specifically, eeh_handle_normal_event() acquired pci_lock_rescan_remove() before calling eeh_pe_bus_get(), but eeh_pe_bus_get() itself attempts to acquire the same lock internally, causing nested locking and disrupting normal EEH event handling paths. This patch adds a boolean parameter do_lock to _eeh_pe_bus_get(), with two public wrappers: eeh_pe_bus_get() with locking enabled. eeh_pe_bus_get_nolock() that skips locking. Callers that already hold pci_lock_rescan_remove() now use eeh_pe_bus_get_nolock() to avoid recursive lock acquisition. Additionally, pci_lock_rescan_remove() calls are restored to the correct position—after eeh_pe_bus_get() and immediately before iterating affected PEs and devices. This ensures EEH-triggered PCI removes occur under proper bus rescan locking without recursive lock contention. The eeh_pe_loc_get() function has been split into two functions: eeh_pe_loc_get(struct eeh_pe *pe) which retrieves the loc for given PE. eeh_pe_loc_get_bus(struct pci_bus *bus) which retrieves the location code for given bus. This resolves lockdep warnings such as: <snip> [ 84.964298] [ T928] ============================================ [ 84.964304] [ T928] WARNING: possible recursive locking detected [ 84.964311] [ T928] 6.18.0-rc3 #51 Not tainted [ 84.964315] [ T928] -------------------------------------------- [ 84.964320] [ T928] eehd/928 is trying to acquire lock: [ 84.964324] [ T928] c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40 [ 84.964342] [ T928] but task is already holding lock: [ 84.964347] [ T928] c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40 [ 84.964357] [ T928] other info that might help us debug this: [ 84.964363] [ T928] Possible unsafe locking scenario: [ 84.964367] [ T928] CPU0 [ 84.964370] [ T928] ---- [ 84.964373] [ T928] lock(pci_rescan_remove_lock); [ 84.964378] [ T928] lock(pci_rescan_remove_lock); [ 84.964383] [ T928] *** DEADLOCK *** [ 84.964388] [ T928] May be due to missing lock nesting notation [ 84.964393] [ T928] 1 lock held by eehd/928: [ 84.964397] [ T928] #0: c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40 [ 84.964408] [ T928] stack backtrace: [ 84.964414] [ T928] CPU: 2 UID: 0 PID: 928 Comm: eehd Not tainted 6.18.0-rc3 #51 VOLUNTARY [ 84.964417] [ T928] Hardware name: IBM,9080-HEX POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_022) hv:phyp pSeries [ 84.964419] [ T928] Call Trace: [ 84.964420] [ T928] [c0000011a7157990] [c000000001705de4] dump_stack_lvl+0xc8/0x130 (unreliable) [ 84.964424] [ T928] [c0000011a71579d0] [c0000000002f66e0] print_deadlock_bug+0x430/0x440 [ 84.964428] [ T928] [c0000011a7157a70] [c0000000002fd0c0] __lock_acquire+0x1530/0x2d80 [ 84.964431] [ T928] [c0000011a7157ba0] [c0000000002fea54] lock_acquire+0x144/0x410 [ 84.964433] [ T928] [c0000011a7157cb0] [c0000011a7157cb0] __mutex_lock+0xf4/0x1050 [ 84.964436] [ T928] [c0000011a7157e00] [c000000000de21d8] pci_lock_rescan_remove+0x28/0x40 [ 84.964439] [ T928] [c0000011a7157e20] [c00000000004ed98] eeh_pe_bus_get+0x48/0xc0 [ 84.964442] [ T928] [c0000011a7157e50] [c00000 ---truncated---

check_input_term in sound/usb/mixer.c in the Linux kernel through 5.2.9 mishandles recursion, leading to kernel stack exhaustion.

In the Linux kernel, the following vulnerability has been resolved: arm64: Reserve an extra page for early kernel mapping The final part of [data, end) segment may overflow into the next page of init_pg_end[1] which is the gap page before early_init_stack[2]: [1] crash_arm64_v9.0.1> vtop ffffffed00601000 VIRTUAL PHYSICAL ffffffed00601000 83401000 PAGE DIRECTORY: ffffffecffd62000 PGD: ffffffecffd62da0 => 10000000833fb003 PMD: ffffff80033fb018 => 10000000833fe003 PTE: ffffff80033fe008 => 68000083401f03 PAGE: 83401000 PTE PHYSICAL FLAGS 68000083401f03 83401000 (VALID|SHARED|AF|NG|PXN|UXN) PAGE PHYSICAL MAPPING INDEX CNT FLAGS fffffffec00d0040 83401000 0 0 1 4000 reserved [2] ffffffed002c8000 (r) __pi__data ffffffed0054e000 (d) __pi___bss_start ffffffed005f5000 (b) __pi_init_pg_dir ffffffed005fe000 (b) __pi_init_pg_end ffffffed005ff000 (B) early_init_stack ffffffed00608000 (b) __pi__end For 4K pages, the early kernel mapping may use 2MB block entries but the kernel segments are only 64KB aligned. Segment boundaries that fall within a 2MB block therefore require a PTE table so that different attributes can be applied on either side of the boundary. KERNEL_SEGMENT_COUNT still correctly counts the five permanent kernel VMAs registered by declare_kernel_vmas(). However, since commit 5973a62efa34 ("arm64: map [_text, _stext) virtual address range non-executable+read-only"), the early mapper also maps [_text, _stext) separately from [_stext, _etext). This adds one more early-only split and can require one more page-table page than the existing EARLY_SEGMENT_EXTRA_PAGES allowance reserves. Increase the 4K-page early mapping allowance by one page to cover that additional split. [catalin.marinas@arm.com: rewrote part of the commit log] [catalin.marinas@arm.com: expanded the code comment]

In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix recursive locking in __configfs_open_file() In flush_write_buffer, &p->frag_sem is acquired and then the loaded store function is called, which, here, is target_core_item_dbroot_store(). This function called filp_open(), following which these functions were called (in reverse order), according to the call trace: down_read __configfs_open_file do_dentry_open vfs_open do_open path_openat do_filp_open file_open_name filp_open target_core_item_dbroot_store flush_write_buffer configfs_write_iter target_core_item_dbroot_store() tries to validate the new file path by trying to open the file path provided to it; however, in this case, the bug report shows: db_root: not a directory: /sys/kernel/config/target/dbroot indicating that the same configfs file was tried to be opened, on which it is currently working on. Thus, it is trying to acquire frag_sem semaphore of the same file of which it already holds the semaphore obtained in flush_write_buffer(), leading to acquiring the semaphore in a nested manner and a possibility of recursive locking. Fix this by modifying target_core_item_dbroot_store() to use kern_path() instead of filp_open() to avoid opening the file using filesystem-specific function __configfs_open_file(), and further modifying it to make this fix compatible.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix recvmsg() unconditional requeue If rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call at the front of the recvmsg queue already has its mutex locked, it requeues the call - whether or not the call is already queued. The call may be on the queue because MSG_PEEK was also passed and so the call was not dequeued or because the I/O thread requeued it. The unconditional requeue may then corrupt the recvmsg queue, leading to things like UAFs or refcount underruns. Fix this by only requeuing the call if it isn't already on the queue - and moving it to the front if it is already queued. If we don't queue it, we have to put the ref we obtained by dequeuing it. Also, MSG_PEEK doesn't dequeue the call so shouldn't call rxrpc_notify_socket() for the call if we didn't use up all the data on the queue, so fix that also.

In the Linux kernel, the following vulnerability has been resolved: perf: Improve missing SIGTRAP checking To catch missing SIGTRAP we employ a WARN in __perf_event_overflow(), which fires if pending_sigtrap was already set: returning to user space without consuming pending_sigtrap, and then having the event fire again would re-enter the kernel and trigger the WARN. This, however, seemed to miss the case where some events not associated with progress in the user space task can fire and the interrupt handler runs before the IRQ work meant to consume pending_sigtrap (and generate the SIGTRAP). syzbot gifted us this stack trace: | WARNING: CPU: 0 PID: 3607 at kernel/events/core.c:9313 __perf_event_overflow | Modules linked in: | CPU: 0 PID: 3607 Comm: syz-executor100 Not tainted 6.1.0-rc2-syzkaller-00073-g88619e77b33d #0 | Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 | RIP: 0010:__perf_event_overflow+0x498/0x540 kernel/events/core.c:9313 | <...> | Call Trace: | <TASK> | perf_swevent_hrtimer+0x34f/0x3c0 kernel/events/core.c:10729 | __run_hrtimer kernel/time/hrtimer.c:1685 [inline] | __hrtimer_run_queues+0x1c6/0xfb0 kernel/time/hrtimer.c:1749 | hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811 | local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1096 [inline] | __sysvec_apic_timer_interrupt+0x17c/0x640 arch/x86/kernel/apic/apic.c:1113 | sysvec_apic_timer_interrupt+0x40/0xc0 arch/x86/kernel/apic/apic.c:1107 | asm_sysvec_apic_timer_interrupt+0x16/0x20 arch/x86/include/asm/idtentry.h:649 | <...> | </TASK> In this case, syzbot produced a program with event type PERF_TYPE_SOFTWARE and config PERF_COUNT_SW_CPU_CLOCK. The hrtimer manages to fire again before the IRQ work got a chance to run, all while never having returned to user space. Improve the WARN to check for real progress in user space: approximate this by storing a 32-bit hash of the current IP into pending_sigtrap, and if an event fires while pending_sigtrap still matches the previous IP, we assume no progress (false negatives are possible given we could return to user space and trigger again on the same IP).

In the Linux kernel, the following vulnerability has been resolved: rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed Registering a kprobe on __rcu_irq_enter_check_tick() can cause kernel stack overflow as shown below. This issue can be reproduced by enabling CONFIG_NO_HZ_FULL and booting the kernel with argument "nohz_full=", and then giving the following commands at the shell prompt: # cd /sys/kernel/tracing/ # echo 'p:mp1 __rcu_irq_enter_check_tick' >> kprobe_events # echo 1 > events/kprobes/enable This commit therefore adds __rcu_irq_enter_check_tick() to the kprobes blacklist using NOKPROBE_SYMBOL(). Insufficient stack space to handle exception! ESR: 0x00000000f2000004 -- BRK (AArch64) FAR: 0x0000ffffccf3e510 Task stack: [0xffff80000ad30000..0xffff80000ad38000] IRQ stack: [0xffff800008050000..0xffff800008058000] Overflow stack: [0xffff089c36f9f310..0xffff089c36fa0310] CPU: 5 PID: 190 Comm: bash Not tainted 6.2.0-rc2-00320-g1f5abbd77e2c #19 Hardware name: linux,dummy-virt (DT) pstate: 400003c5 (nZcv DAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __rcu_irq_enter_check_tick+0x0/0x1b8 lr : ct_nmi_enter+0x11c/0x138 sp : ffff80000ad30080 x29: ffff80000ad30080 x28: ffff089c82e20000 x27: 0000000000000000 x26: 0000000000000000 x25: ffff089c02a8d100 x24: 0000000000000000 x23: 00000000400003c5 x22: 0000ffffccf3e510 x21: ffff089c36fae148 x20: ffff80000ad30120 x19: ffffa8da8fcce148 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: ffffa8da8e44ea6c x14: ffffa8da8e44e968 x13: ffffa8da8e03136c x12: 1fffe113804d6809 x11: ffff6113804d6809 x10: 0000000000000a60 x9 : dfff800000000000 x8 : ffff089c026b404f x7 : 00009eec7fb297f7 x6 : 0000000000000001 x5 : ffff80000ad30120 x4 : dfff800000000000 x3 : ffffa8da8e3016f4 x2 : 0000000000000003 x1 : 0000000000000000 x0 : 0000000000000000 Kernel panic - not syncing: kernel stack overflow CPU: 5 PID: 190 Comm: bash Not tainted 6.2.0-rc2-00320-g1f5abbd77e2c #19 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0xf8/0x108 show_stack+0x20/0x30 dump_stack_lvl+0x68/0x84 dump_stack+0x1c/0x38 panic+0x214/0x404 add_taint+0x0/0xf8 panic_bad_stack+0x144/0x160 handle_bad_stack+0x38/0x58 __bad_stack+0x78/0x7c __rcu_irq_enter_check_tick+0x0/0x1b8 arm64_enter_el1_dbg.isra.0+0x14/0x20 el1_dbg+0x2c/0x90 el1h_64_sync_handler+0xcc/0xe8 el1h_64_sync+0x64/0x68 __rcu_irq_enter_check_tick+0x0/0x1b8 arm64_enter_el1_dbg.isra.0+0x14/0x20 el1_dbg+0x2c/0x90 el1h_64_sync_handler+0xcc/0xe8 el1h_64_sync+0x64/0x68 __rcu_irq_enter_check_tick+0x0/0x1b8 arm64_enter_el1_dbg.isra.0+0x14/0x20 el1_dbg+0x2c/0x90 el1h_64_sync_handler+0xcc/0xe8 el1h_64_sync+0x64/0x68 __rcu_irq_enter_check_tick+0x0/0x1b8 [...] el1_dbg+0x2c/0x90 el1h_64_sync_handler+0xcc/0xe8 el1h_64_sync+0x64/0x68 __rcu_irq_enter_check_tick+0x0/0x1b8 arm64_enter_el1_dbg.isra.0+0x14/0x20 el1_dbg+0x2c/0x90 el1h_64_sync_handler+0xcc/0xe8 el1h_64_sync+0x64/0x68 __rcu_irq_enter_check_tick+0x0/0x1b8 arm64_enter_el1_dbg.isra.0+0x14/0x20 el1_dbg+0x2c/0x90 el1h_64_sync_handler+0xcc/0xe8 el1h_64_sync+0x64/0x68 __rcu_irq_enter_check_tick+0x0/0x1b8 el1_interrupt+0x28/0x60 el1h_64_irq_handler+0x18/0x28 el1h_64_irq+0x64/0x68 __ftrace_set_clr_event_nolock+0x98/0x198 __ftrace_set_clr_event+0x58/0x80 system_enable_write+0x144/0x178 vfs_write+0x174/0x738 ksys_write+0xd0/0x188 __arm64_sys_write+0x4c/0x60 invoke_syscall+0x64/0x180 el0_svc_common.constprop.0+0x84/0x160 do_el0_svc+0x48/0xe8 el0_svc+0x34/0xd0 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x190/0x194 SMP: stopping secondary CPUs Kernel Offset: 0x28da86000000 from 0xffff800008000000 PHYS_OFFSET: 0xfffff76600000000 CPU features: 0x00000,01a00100,0000421b Memory Limit: none

In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/qm - increase the memory of local variables Increase the buffer to prevent stack overflow by fuzz test. The maximum length of the qos configuration buffer is 256 bytes. Currently, the value of the 'val buffer' is only 32 bytes. The sscanf does not check the dest memory length. So the 'val buffer' may stack overflow.

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Check for any of tcp_bpf_prots when cloning a listener A listening socket linked to a sockmap has its sk_prot overridden. It points to one of the struct proto variants in tcp_bpf_prots. The variant depends on the socket's family and which sockmap programs are attached. A child socket cloned from a TCP listener initially inherits their sk_prot. But before cloning is finished, we restore the child's proto to the listener's original non-tcp_bpf_prots one. This happens in tcp_create_openreq_child -> tcp_bpf_clone. Today, in tcp_bpf_clone we detect if the child's proto should be restored by checking only for the TCP_BPF_BASE proto variant. This is not correct. The sk_prot of listening socket linked to a sockmap can point to to any variant in tcp_bpf_prots. If the listeners sk_prot happens to be not the TCP_BPF_BASE variant, then the child socket unintentionally is left if the inherited sk_prot by tcp_bpf_clone. This leads to issues like infinite recursion on close [1], because the child state is otherwise not set up for use with tcp_bpf_prot operations. Adjust the check in tcp_bpf_clone to detect all of tcp_bpf_prots variants. Note that it wouldn't be sufficient to check the socket state when overriding the sk_prot in tcp_bpf_update_proto in order to always use the TCP_BPF_BASE variant for listening sockets. Since commit b8b8315e39ff ("bpf, sockmap: Remove unhash handler for BPF sockmap usage") it is possible for a socket to transition to TCP_LISTEN state while already linked to a sockmap, e.g. connect() -> insert into map -> connect(AF_UNSPEC) -> listen(). [1]: https://lore.kernel.org/all/00000000000073b14905ef2e7401@google.com/

In the Linux kernel, the following vulnerability has been resolved: iommufd: Do not corrupt the pfn list when doing batch carry If batch->end is 0 then setting npfns[0] before computing the new value of pfns will fail to adjust the pfn and result in various page accounting corruptions. It should be ordered after. This seems to result in various kinds of page meta-data corruption related failures: WARNING: CPU: 1 PID: 527 at mm/gup.c:75 try_grab_folio+0x503/0x740 Modules linked in: CPU: 1 PID: 527 Comm: repro Not tainted 6.3.0-rc2-eeac8ede1755+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:try_grab_folio+0x503/0x740 Code: e3 01 48 89 de e8 6d c1 dd ff 48 85 db 0f 84 7c fe ff ff e8 4f bf dd ff 49 8d 47 ff 48 89 45 d0 e9 73 fe ff ff e8 3d bf dd ff <0f> 0b 31 db e9 d0 fc ff ff e8 2f bf dd ff 48 8b 5d c8 31 ff 48 89 RSP: 0018:ffffc90000f37908 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 00000000fffffc02 RCX: ffffffff81504c26 RDX: 0000000000000000 RSI: ffff88800d030000 RDI: 0000000000000002 RBP: ffffc90000f37948 R08: 000000000003ca24 R09: 0000000000000008 R10: 000000000003ca00 R11: 0000000000000023 R12: ffffea000035d540 R13: 0000000000000001 R14: 0000000000000000 R15: ffffea000035d540 FS: 00007fecbf659740(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200011c3 CR3: 000000000ef66006 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> internal_get_user_pages_fast+0xd32/0x2200 pin_user_pages_fast+0x65/0x90 pfn_reader_user_pin+0x376/0x390 pfn_reader_next+0x14a/0x7b0 pfn_reader_first+0x140/0x1b0 iopt_area_fill_domain+0x74/0x210 iopt_table_add_domain+0x30e/0x6e0 iommufd_device_selftest_attach+0x7f/0x140 iommufd_test+0x10ff/0x16f0 iommufd_fops_ioctl+0x206/0x330 __x64_sys_ioctl+0x10e/0x160 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc

In the Linux kernel, the following vulnerability has been resolved: perf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start() Since commit 096b52fd2bb4 ("perf: RISC-V: throttle perf events") the perf_sample_event_took() function was added to report time spent in overflow interrupts. If the interrupt takes too long, the perf framework will lower the sysctl_perf_event_sample_rate and max_samples_per_tick. When hwc->interrupts is larger than max_samples_per_tick, the hwc->interrupts will be set to MAX_INTERRUPTS, and events will be throttled within the __perf_event_account_interrupt() function. However, the RISC-V PMU driver doesn't call riscv_pmu_stop() to update the PERF_HES_STOPPED flag after perf_event_overflow() in pmu_sbi_ovf_handler() function to avoid throttling. When the perf framework unthrottled the event in the timer interrupt handler, it triggers riscv_pmu_start() function and causes a WARN_ON_ONCE() warning, as shown below: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 240 at drivers/perf/riscv_pmu.c:184 riscv_pmu_start+0x7c/0x8e Modules linked in: CPU: 0 PID: 240 Comm: ls Not tainted 6.4-rc4-g19d0788e9ef2 #1 Hardware name: SiFive (DT) epc : riscv_pmu_start+0x7c/0x8e ra : riscv_pmu_start+0x28/0x8e epc : ffffffff80aef864 ra : ffffffff80aef810 sp : ffff8f80004db6f0 gp : ffffffff81c83750 tp : ffffaf80069f9bc0 t0 : ffff8f80004db6c0 t1 : 0000000000000000 t2 : 000000000000001f s0 : ffff8f80004db720 s1 : ffffaf8008ca1068 a0 : 0000ffffffffffff a1 : 0000000000000000 a2 : 0000000000000001 a3 : 0000000000000870 a4 : 0000000000000000 a5 : 0000000000000000 a6 : 0000000000000840 a7 : 0000000000000030 s2 : 0000000000000000 s3 : ffffaf8005165800 s4 : ffffaf800424da00 s5 : ffffffffffffffff s6 : ffffffff81cc7590 s7 : 0000000000000000 s8 : 0000000000000006 s9 : 0000000000000001 s10: ffffaf807efbc340 s11: ffffaf807efbbf00 t3 : ffffaf8006a16028 t4 : 00000000dbfbb796 t5 : 0000000700000000 t6 : ffffaf8005269870 status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [<ffffffff80aef864>] riscv_pmu_start+0x7c/0x8e [<ffffffff80185b56>] perf_adjust_freq_unthr_context+0x15e/0x174 [<ffffffff80188642>] perf_event_task_tick+0x88/0x9c [<ffffffff800626a8>] scheduler_tick+0xfe/0x27c [<ffffffff800b5640>] update_process_times+0x9a/0xba [<ffffffff800c5bd4>] tick_sched_handle+0x32/0x66 [<ffffffff800c5e0c>] tick_sched_timer+0x64/0xb0 [<ffffffff800b5e50>] __hrtimer_run_queues+0x156/0x2f4 [<ffffffff800b6bdc>] hrtimer_interrupt+0xe2/0x1fe [<ffffffff80acc9e8>] riscv_timer_interrupt+0x38/0x42 [<ffffffff80090a16>] handle_percpu_devid_irq+0x90/0x1d2 [<ffffffff8008a9f4>] generic_handle_domain_irq+0x28/0x36 After referring other PMU drivers like Arm, Loongarch, Csky, and Mips, they don't call *_pmu_stop() to update with PERF_HES_STOPPED flag after perf_event_overflow() function nor do they add PERF_HES_STOPPED flag checking in *_pmu_start() which don't cause this warning. Thus, it's recommended to remove this unnecessary check in riscv_pmu_start() function to prevent this warning.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix null-ptr-deref on inode->i_op in ntfs_lookup() Syzbot reported a null-ptr-deref bug: ntfs3: loop0: Different NTFS' sector size (1024) and media sector size (512) ntfs3: loop0: Mark volume as dirty due to NTFS errors general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:d_flags_for_inode fs/dcache.c:1980 [inline] RIP: 0010:__d_add+0x5ce/0x800 fs/dcache.c:2796 Call Trace: <TASK> d_splice_alias+0x122/0x3b0 fs/dcache.c:3191 lookup_open fs/namei.c:3391 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x10e6/0x2df0 fs/namei.c:3688 do_filp_open+0x264/0x4f0 fs/namei.c:3718 do_sys_openat2+0x124/0x4e0 fs/open.c:1310 do_sys_open fs/open.c:1326 [inline] __do_sys_open fs/open.c:1334 [inline] __se_sys_open fs/open.c:1330 [inline] __x64_sys_open+0x221/0x270 fs/open.c:1330 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd If the MFT record of ntfs inode is not a base record, inode->i_op can be NULL. And a null-ptr-deref may happen: ntfs_lookup() dir_search_u() # inode->i_op is set to NULL d_splice_alias() __d_add() d_flags_for_inode() # inode->i_op->get_link null-ptr-deref Fix this by adding a Check on inode->i_op before calling the d_splice_alias() function.

In the Linux kernel, the following vulnerability has been resolved: clk: davinci: Add NULL check in davinci_lpsc_clk_register() devm_kasprintf() returns NULL when memory allocation fails. Currently, davinci_lpsc_clk_register() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue and ensuring no resources are left allocated.

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix the sendmsg byte count in siw_tcp_sendpages Ever since commit c2ff29e99a76 ("siw: Inline do_tcp_sendpages()"), we have been doing this: static int siw_tcp_sendpages(struct socket *s, struct page **page, int offset, size_t size) [...] /* Calculate the number of bytes we need to push, for this page * specifically */ size_t bytes = min_t(size_t, PAGE_SIZE - offset, size); /* If we can't splice it, then copy it in, as normal */ if (!sendpage_ok(page[i])) msg.msg_flags &= ~MSG_SPLICE_PAGES; /* Set the bvec pointing to the page, with len $bytes */ bvec_set_page(&bvec, page[i], bytes, offset); /* Set the iter to $size, aka the size of the whole sendpages (!!!) */ iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, &bvec, 1, size); try_page_again: lock_sock(sk); /* Sendmsg with $size size (!!!) */ rv = tcp_sendmsg_locked(sk, &msg, size); This means we've been sending oversized iov_iters and tcp_sendmsg calls for a while. This has a been a benign bug because sendpage_ok() always returned true. With the recent slab allocator changes being slowly introduced into next (that disallow sendpage on large kmalloc allocations), we have recently hit out-of-bounds crashes, due to slight differences in iov_iter behavior between the MSG_SPLICE_PAGES and "regular" copy paths: (MSG_SPLICE_PAGES) skb_splice_from_iter iov_iter_extract_pages iov_iter_extract_bvec_pages uses i->nr_segs to correctly stop in its tracks before OoB'ing everywhere skb_splice_from_iter gets a "short" read (!MSG_SPLICE_PAGES) skb_copy_to_page_nocache copy=iov_iter_count [...] copy_from_iter /* this doesn't help */ if (unlikely(iter->count < len)) len = iter->count; iterate_bvec ... and we run off the bvecs Fix this by properly setting the iov_iter's byte count, plus sending the correct byte count to tcp_sendmsg_locked.

In the Linux kernel, the following vulnerability has been resolved: arm64: kexec: initialize kexec_buf struct in load_other_segments() Patch series "kexec: Fix invalid field access". The kexec_buf structure was previously declared without initialization. commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly") added a field that is always read but not consistently populated by all architectures. This un-initialized field will contain garbage. This is also triggering a UBSAN warning when the uninitialized data was accessed: ------------[ cut here ]------------ UBSAN: invalid-load in ./include/linux/kexec.h:210:10 load of value 252 is not a valid value for type '_Bool' Zero-initializing kexec_buf at declaration ensures all fields are cleanly set, preventing future instances of uninitialized memory being used. An initial fix was already landed for arm64[0], and this patchset fixes the problem on the remaining arm64 code and on riscv, as raised by Mark. Discussions about this problem could be found at[1][2]. This patch (of 3): The kexec_buf structure was previously declared without initialization. commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly") added a field that is always read but not consistently populated by all architectures. This un-initialized field will contain garbage. This is also triggering a UBSAN warning when the uninitialized data was accessed: ------------[ cut here ]------------ UBSAN: invalid-load in ./include/linux/kexec.h:210:10 load of value 252 is not a valid value for type '_Bool' Zero-initializing kexec_buf at declaration ensures all fields are cleanly set, preventing future instances of uninitialized memory being used.

In the Linux kernel, the following vulnerability has been resolved: dm-stripe: fix a possible integer overflow There's a possible integer overflow in stripe_io_hints if we have too large chunk size. Test if the overflow happened, and if it did, don't set limits->io_min and limits->io_opt;

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null pointer check in mod_hdcp_hdcp1_create_session() The function mod_hdcp_hdcp1_create_session() calls the function get_first_active_display(), but does not check its return value. The return value is a null pointer if the display list is empty. This will lead to a null pointer dereference. Add a null pointer check for get_first_active_display() and return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null. This is similar to the commit c3e9826a2202 ("drm/amd/display: Add null pointer check for get_first_active_display()"). (cherry picked from commit 5e43eb3cd731649c4f8b9134f857be62a416c893)

In the Linux kernel, the following vulnerability has been resolved: net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool() Clang static checker (scan-build) warning: net/ethtool/ioctl.c:line 2233, column 2 Called function pointer is null (null dereference). Return '-EOPNOTSUPP' when 'ops->get_ethtool_phy_stats' is NULL to fix this typo error.

In the Linux kernel, the following vulnerability has been resolved: mm: shmem: fix getting incorrect lruvec when replacing a shmem folio When testing shmem swapin, I encountered the warning below on my machine. The reason is that replacing an old shmem folio with a new one causes mem_cgroup_migrate() to clear the old folio's memcg data. As a result, the old folio cannot get the correct memcg's lruvec needed to remove itself from the LRU list when it is being freed. This could lead to possible serious problems, such as LRU list crashes due to holding the wrong LRU lock, and incorrect LRU statistics. To fix this issue, we can fallback to use the mem_cgroup_replace_folio() to replace the old shmem folio. [ 5241.100311] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5d9960 [ 5241.100317] head: order:4 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 5241.100319] flags: 0x17fffe0000040068(uptodate|lru|head|swapbacked|node=0|zone=2|lastcpupid=0x3ffff) [ 5241.100323] raw: 17fffe0000040068 fffffdffd6687948 fffffdffd69ae008 0000000000000000 [ 5241.100325] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 5241.100326] head: 17fffe0000040068 fffffdffd6687948 fffffdffd69ae008 0000000000000000 [ 5241.100327] head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 5241.100328] head: 17fffe0000000204 fffffdffd6665801 ffffffffffffffff 0000000000000000 [ 5241.100329] head: 0000000a00000010 0000000000000000 00000000ffffffff 0000000000000000 [ 5241.100330] page dumped because: VM_WARN_ON_ONCE_FOLIO(!memcg && !mem_cgroup_disabled()) [ 5241.100338] ------------[ cut here ]------------ [ 5241.100339] WARNING: CPU: 19 PID: 78402 at include/linux/memcontrol.h:775 folio_lruvec_lock_irqsave+0x140/0x150 [...] [ 5241.100374] pc : folio_lruvec_lock_irqsave+0x140/0x150 [ 5241.100375] lr : folio_lruvec_lock_irqsave+0x138/0x150 [ 5241.100376] sp : ffff80008b38b930 [...] [ 5241.100398] Call trace: [ 5241.100399] folio_lruvec_lock_irqsave+0x140/0x150 [ 5241.100401] __page_cache_release+0x90/0x300 [ 5241.100404] __folio_put+0x50/0x108 [ 5241.100406] shmem_replace_folio+0x1b4/0x240 [ 5241.100409] shmem_swapin_folio+0x314/0x528 [ 5241.100411] shmem_get_folio_gfp+0x3b4/0x930 [ 5241.100412] shmem_fault+0x74/0x160 [ 5241.100414] __do_fault+0x40/0x218 [ 5241.100417] do_shared_fault+0x34/0x1b0 [ 5241.100419] do_fault+0x40/0x168 [ 5241.100420] handle_pte_fault+0x80/0x228 [ 5241.100422] __handle_mm_fault+0x1c4/0x440 [ 5241.100424] handle_mm_fault+0x60/0x1f0 [ 5241.100426] do_page_fault+0x120/0x488 [ 5241.100429] do_translation_fault+0x4c/0x68 [ 5241.100431] do_mem_abort+0x48/0xa0 [ 5241.100434] el0_da+0x38/0xc0 [ 5241.100436] el0t_64_sync_handler+0x68/0xc0 [ 5241.100437] el0t_64_sync+0x14c/0x150 [ 5241.100439] ---[ end trace 0000000000000000 ]--- [baolin.wang@linux.alibaba.com: remove less helpful comments, per Matthew]

In the Linux kernel, the following vulnerability has been resolved: pinctrl: canaan: k230: add NULL check in DT parse Add a NULL check for the return value of of_get_property() when retrieving the "pinmux" property in the group parser. This avoids a potential NULL pointer dereference if the property is missing from the device tree node. Also fix a typo ("sintenel") in the device ID match table comment, correcting it to "sentinel".

An issue was discovered in the Linux kernel through 5.18.14. xfrm_expand_policies in net/xfrm/xfrm_policy.c can cause a refcount to be dropped twice.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvm Currently there is no synchronisation between finalize_pkvm() and kvm_arm_init() initcalls. The finalize_pkvm() proceeds happily even if kvm_arm_init() fails resulting in the following warning on all the CPUs and eventually a HYP panic: | kvm [1]: IPA Size Limit: 48 bits | kvm [1]: Failed to init hyp memory protection | kvm [1]: error initializing Hyp mode: -22 | | <snip> | | WARNING: CPU: 0 PID: 0 at arch/arm64/kvm/pkvm.c:226 _kvm_host_prot_finalize+0x30/0x50 | Modules linked in: | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0 #237 | Hardware name: FVP Base RevC (DT) | pstate: 634020c5 (nZCv daIF +PAN -UAO +TCO +DIT -SSBS BTYPE=--) | pc : _kvm_host_prot_finalize+0x30/0x50 | lr : __flush_smp_call_function_queue+0xd8/0x230 | | Call trace: | _kvm_host_prot_finalize+0x3c/0x50 | on_each_cpu_cond_mask+0x3c/0x6c | pkvm_drop_host_privileges+0x4c/0x78 | finalize_pkvm+0x3c/0x5c | do_one_initcall+0xcc/0x240 | do_initcall_level+0x8c/0xac | do_initcalls+0x54/0x94 | do_basic_setup+0x1c/0x28 | kernel_init_freeable+0x100/0x16c | kernel_init+0x20/0x1a0 | ret_from_fork+0x10/0x20 | Failed to finalize Hyp protection: -22 | dtb=fvp-base-revc.dtb | kvm [95]: nVHE hyp BUG at: arch/arm64/kvm/hyp/nvhe/mem_protect.c:540! | kvm [95]: nVHE call trace: | kvm [95]: [<ffff800081052984>] __kvm_nvhe_hyp_panic+0xac/0xf8 | kvm [95]: [<ffff800081059644>] __kvm_nvhe_handle_host_mem_abort+0x1a0/0x2ac | kvm [95]: [<ffff80008105511c>] __kvm_nvhe_handle_trap+0x4c/0x160 | kvm [95]: [<ffff8000810540fc>] __kvm_nvhe___skip_pauth_save+0x4/0x4 | kvm [95]: ---[ end nVHE call trace ]--- | kvm [95]: Hyp Offset: 0xfffe8db00ffa0000 | Kernel panic - not syncing: HYP panic: | PS:a34023c9 PC:0000f250710b973c ESR:00000000f2000800 | FAR:ffff000800cb00d0 HPFAR:000000000880cb00 PAR:0000000000000000 | VCPU:0000000000000000 | CPU: 3 PID: 95 Comm: kworker/u16:2 Tainted: G W 6.4.0 #237 | Hardware name: FVP Base RevC (DT) | Workqueue: rpciod rpc_async_schedule | Call trace: | dump_backtrace+0xec/0x108 | show_stack+0x18/0x2c | dump_stack_lvl+0x50/0x68 | dump_stack+0x18/0x24 | panic+0x138/0x33c | nvhe_hyp_panic_handler+0x100/0x184 | new_slab+0x23c/0x54c | ___slab_alloc+0x3e4/0x770 | kmem_cache_alloc_node+0x1f0/0x278 | __alloc_skb+0xdc/0x294 | tcp_stream_alloc_skb+0x2c/0xf0 | tcp_sendmsg_locked+0x3d0/0xda4 | tcp_sendmsg+0x38/0x5c | inet_sendmsg+0x44/0x60 | sock_sendmsg+0x1c/0x34 | xprt_sock_sendmsg+0xdc/0x274 | xs_tcp_send_request+0x1ac/0x28c | xprt_transmit+0xcc/0x300 | call_transmit+0x78/0x90 | __rpc_execute+0x114/0x3d8 | rpc_async_schedule+0x28/0x48 | process_one_work+0x1d8/0x314 | worker_thread+0x248/0x474 | kthread+0xfc/0x184 | ret_from_fork+0x10/0x20 | SMP: stopping secondary CPUs | Kernel Offset: 0x57c5cb460000 from 0xffff800080000000 | PHYS_OFFSET: 0x80000000 | CPU features: 0x00000000,1035b7a3,ccfe773f | Memory Limit: none | ---[ end Kernel panic - not syncing: HYP panic: | PS:a34023c9 PC:0000f250710b973c ESR:00000000f2000800 | FAR:ffff000800cb00d0 HPFAR:000000000880cb00 PAR:0000000000000000 | VCPU:0000000000000000 ]--- Fix it by checking for the successfull initialisation of kvm_arm_init() in finalize_pkvm() before proceeding any futher.

In the Linux kernel, the following vulnerability has been resolved: mm/kmemleak: avoid deadlock by moving pr_warn() outside kmemleak_lock When netpoll is enabled, calling pr_warn_once() while holding kmemleak_lock in mem_pool_alloc() can cause a deadlock due to lock inversion with the netconsole subsystem. This occurs because pr_warn_once() may trigger netpoll, which eventually leads to __alloc_skb() and back into kmemleak code, attempting to reacquire kmemleak_lock. This is the path for the deadlock. mem_pool_alloc() -> raw_spin_lock_irqsave(&kmemleak_lock, flags); -> pr_warn_once() -> netconsole subsystem -> netpoll -> __alloc_skb -> __create_object -> raw_spin_lock_irqsave(&kmemleak_lock, flags); Fix this by setting a flag and issuing the pr_warn_once() after kmemleak_lock is released.

In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix NPD in {arp,neigh}_reduce() when using nexthop objects When the "proxy" option is enabled on a VXLAN device, the device will suppress ARP requests and IPv6 Neighbor Solicitation messages if it is able to reply on behalf of the remote host. That is, if a matching and valid neighbor entry is configured on the VXLAN device whose MAC address is not behind the "any" remote (0.0.0.0 / ::). The code currently assumes that the FDB entry for the neighbor's MAC address points to a valid remote destination, but this is incorrect if the entry is associated with an FDB nexthop group. This can result in a NPD [1][3] which can be reproduced using [2][4]. Fix by checking that the remote destination exists before dereferencing it. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_xmit+0xb58/0x15f0 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip nexthop add id 1 via 192.0.2.2 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3 [3] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014 RIP: 0010:vxlan_xmit+0x803/0x1600 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 ip6_finish_output2+0x210/0x6c0 ip6_finish_output+0x1af/0x2b0 ip6_mr_output+0x92/0x3e0 ip6_send_skb+0x30/0x90 rawv6_sendmsg+0xe6e/0x12e0 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f383422ec77 [4] #!/bin/bash ip address add 2001:db8:1::1/128 dev lo ip nexthop add id 1 via 2001:db8:1::1 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0

In the Linux kernel, the following vulnerability has been resolved: mm/damon/lru_sort: avoid divide-by-zero in damon_lru_sort_apply_parameters() Patch series "mm/damon: avoid divide-by-zero in DAMON module's parameters application". DAMON's RECLAIM and LRU_SORT modules perform no validation on user-configured parameters during application, which may lead to division-by-zero errors. Avoid the divide-by-zero by adding validation checks when DAMON modules attempt to apply the parameters. This patch (of 2): During the calculation of 'hot_thres' and 'cold_thres', either 'sample_interval' or 'aggr_interval' is used as the divisor, which may lead to division-by-zero errors. Fix it by directly returning -EINVAL when such a case occurs. Additionally, since 'aggr_interval' is already required to be set no smaller than 'sample_interval' in damon_set_attrs(), only the case where 'sample_interval' is zero needs to be checked.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/active: Fix misuse of non-idle barriers as fence trackers Users reported oopses on list corruptions when using i915 perf with a number of concurrently running graphics applications. Root cause analysis pointed at an issue in barrier processing code -- a race among perf open / close replacing active barriers with perf requests on kernel context and concurrent barrier preallocate / acquire operations performed during user context first pin / last unpin. When adding a request to a composite tracker, we try to reuse an existing fence tracker, already allocated and registered with that composite. The tracker we obtain may already track another fence, may be an idle barrier, or an active barrier. If the tracker we get occurs a non-idle barrier then we try to delete that barrier from a list of barrier tasks it belongs to. However, while doing that we don't respect return value from a function that performs the barrier deletion. Should the deletion ever fail, we would end up reusing the tracker still registered as a barrier task. Since the same structure field is reused with both fence callback lists and barrier tasks list, list corruptions would likely occur. Barriers are now deleted from a barrier tasks list by temporarily removing the list content, traversing that content with skip over the node to be deleted, then populating the list back with the modified content. Should that intentionally racy concurrent deletion attempts be not serialized, one or more of those may fail because of the list being temporary empty. Related code that ignores the results of barrier deletion was initially introduced in v5.4 by commit d8af05ff38ae ("drm/i915: Allow sharing the idle-barrier from other kernel requests"). However, all users of the barrier deletion routine were apparently serialized at that time, then the issue didn't exhibit itself. Results of git bisect with help of a newly developed igt@gem_barrier_race@remote-request IGT test indicate that list corruptions might start to appear after commit 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles"), introduced in v5.5. Respect results of barrier deletion attempts -- mark the barrier as idle only if successfully deleted from the list. Then, before proceeding with setting our fence as the one currently tracked, make sure that the tracker we've got is not a non-idle barrier. If that check fails then don't use that tracker but go back and try to acquire a new, usable one. v3: use unlikely() to document what outcome we expect (Andi), - fix bad grammar in commit description. v2: no code changes, - blame commit 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles"), v5.5, not commit d8af05ff38ae ("drm/i915: Allow sharing the idle-barrier from other kernel requests"), v5.4, - reword commit description. (cherry picked from commit 506006055769b10d1b2b4e22f636f3b45e0e9fc7)

In the Linux kernel, the following vulnerability has been resolved: sctp: check send stream number after wait_for_sndbuf This patch fixes a corner case where the asoc out stream count may change after wait_for_sndbuf. When the main thread in the client starts a connection, if its out stream count is set to N while the in stream count in the server is set to N - 2, another thread in the client keeps sending the msgs with stream number N - 1, and waits for sndbuf before processing INIT_ACK. However, after processing INIT_ACK, the out stream count in the client is shrunk to N - 2, the same to the in stream count in the server. The crash occurs when the thread waiting for sndbuf is awake and sends the msg in a non-existing stream(N - 1), the call trace is as below: KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] Call Trace: <TASK> sctp_cmd_send_msg net/sctp/sm_sideeffect.c:1114 [inline] sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1777 [inline] sctp_side_effects net/sctp/sm_sideeffect.c:1199 [inline] sctp_do_sm+0x197d/0x5310 net/sctp/sm_sideeffect.c:1170 sctp_primitive_SEND+0x9f/0xc0 net/sctp/primitive.c:163 sctp_sendmsg_to_asoc+0x10eb/0x1a30 net/sctp/socket.c:1868 sctp_sendmsg+0x8d4/0x1d90 net/sctp/socket.c:2026 inet_sendmsg+0x9d/0xe0 net/ipv4/af_inet.c:825 sock_sendmsg_nosec net/socket.c:722 [inline] sock_sendmsg+0xde/0x190 net/socket.c:745 The fix is to add an unlikely check for the send stream number after the thread wakes up from the wait_for_sndbuf.

A NULL pointer dereference vulnerability was found in vmwgfx driver in drivers/gpu/vmxgfx/vmxgfx_execbuf.c in GPU component of Linux kernel with device file '/dev/dri/renderD128 (or Dxxx)'. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS).

In the Linux kernel, the following vulnerability has been resolved: USB: isp1362: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: connac: do not check WED status for non-mmio devices WED is supported just for mmio devices, so do not check it for usb or sdio devices. This patch fixes the crash reported below: [ 21.946627] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d [ 22.525298] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3) [ 22.548274] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d [ 22.557694] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3) [ 22.565885] wlp0s3u1i3: authenticated [ 22.569502] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 1/3) [ 22.578966] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=30 aid=3) [ 22.579113] wlp0s3u1i3: c4:41:1e:f5:2b:1d rejected association temporarily; comeback duration 1000 TU (1024 ms) [ 23.649518] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 2/3) [ 23.752528] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=0 aid=3) [ 23.797450] wlp0s3u1i3: associated [ 24.959527] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 24.959640] BUG: unable to handle page fault for address: ffff88800c223200 [ 24.959706] #PF: supervisor instruction fetch in kernel mode [ 24.959788] #PF: error_code(0x0011) - permissions violation [ 24.959846] PGD 2c01067 P4D 2c01067 PUD 2c02067 PMD c2a8063 PTE 800000000c223163 [ 24.959957] Oops: 0011 [#1] PREEMPT SMP [ 24.960009] CPU: 0 PID: 391 Comm: wpa_supplicant Not tainted 6.2.0-kvm #18 [ 24.960089] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 [ 24.960191] RIP: 0010:0xffff88800c223200 [ 24.960446] RSP: 0018:ffffc90000ff7698 EFLAGS: 00010282 [ 24.960513] RAX: ffff888028397010 RBX: ffff88800c26e630 RCX: 0000000000000058 [ 24.960598] RDX: ffff88800c26f844 RSI: 0000000000000006 RDI: ffff888028397010 [ 24.960682] RBP: ffff88800ea72f00 R08: 18b873fbab2b964c R09: be06b38235f3c63c [ 24.960766] R10: 18b873fbab2b964c R11: be06b38235f3c63c R12: 0000000000000001 [ 24.960853] R13: ffff88800c26f84c R14: ffff8880063f0ff8 R15: ffff88800c26e644 [ 24.960950] FS: 00007effcea327c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 [ 24.961036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.961106] CR2: ffff88800c223200 CR3: 000000000eaa2000 CR4: 00000000000006b0 [ 24.961190] Call Trace: [ 24.961219] <TASK> [ 24.961245] ? mt76_connac_mcu_add_key+0x2cf/0x310 [ 24.961313] ? mt7921_set_key+0x150/0x200 [ 24.961365] ? drv_set_key+0xa9/0x1b0 [ 24.961418] ? ieee80211_key_enable_hw_accel+0xd9/0x240 [ 24.961485] ? ieee80211_key_replace+0x3f3/0x730 [ 24.961541] ? crypto_shash_setkey+0x89/0xd0 [ 24.961597] ? ieee80211_key_link+0x2d7/0x3a0 [ 24.961664] ? crypto_aead_setauthsize+0x31/0x50 [ 24.961730] ? sta_info_hash_lookup+0xa6/0xf0 [ 24.961785] ? ieee80211_add_key+0x1fc/0x250 [ 24.961842] ? rdev_add_key+0x41/0x140 [ 24.961882] ? nl80211_parse_key+0x6c/0x2f0 [ 24.961940] ? nl80211_new_key+0x24a/0x290 [ 24.961984] ? genl_rcv_msg+0x36c/0x3a0 [ 24.962036] ? rdev_mod_link_station+0xe0/0xe0 [ 24.962102] ? nl80211_set_key+0x410/0x410 [ 24.962143] ? nl80211_pre_doit+0x200/0x200 [ 24.962187] ? genl_bind+0xc0/0xc0 [ 24.962217] ? netlink_rcv_skb+0xaa/0xd0 [ 24.962259] ? genl_rcv+0x24/0x40 [ 24.962300] ? netlink_unicast+0x224/0x2f0 [ 24.962345] ? netlink_sendmsg+0x30b/0x3d0 [ 24.962388] ? ____sys_sendmsg+0x109/0x1b0 [ 24.962388] ? ____sys_sendmsg+0x109/0x1b0 [ 24.962440] ? __import_iovec+0x2e/0x110 [ 24.962482] ? ___sys_sendmsg+0xbe/0xe0 [ 24.962525] ? mod_objcg_state+0x25c/0x330 [ 24.962576] ? __dentry_kill+0x19e/0x1d0 [ 24.962618] ? call_rcu+0x18f/0x270 [ 24.962660] ? __dentry_kill+0x19e/0x1d0 [ 24.962702] ? __x64_sys_sendmsg+0x70/0x90 [ 24.962744] ? do_syscall_64+0x3d/0x80 [ 24.962796] ? exit_to_user_mode_prepare+0x1b/0x70 [ 24.962852] ? entry_SYSCA ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ceph: fix crash after fscrypt_encrypt_pagecache_blocks() error The function move_dirty_folio_in_page_array() was created by commit ce80b76dd327 ("ceph: introduce ceph_process_folio_batch() method") by moving code from ceph_writepages_start() to this function. This new function is supposed to return an error code which is checked by the caller (now ceph_process_folio_batch()), and on error, the caller invokes redirty_page_for_writepage() and then breaks from the loop. However, the refactoring commit has gone wrong, and it by accident, it always returns 0 (= success) because it first NULLs the pointer and then returns PTR_ERR(NULL) which is always 0. This means errors are silently ignored, leaving NULL entries in the page array, which may later crash the kernel. The simple solution is to call PTR_ERR() before clearing the pointer.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: hif_usb: fix memory leak of remain_skbs hif_dev->remain_skb is allocated and used exclusively in ath9k_hif_usb_rx_stream(). It is implied that an allocated remain_skb is processed and subsequently freed (in error paths) only during the next call of ath9k_hif_usb_rx_stream(). So, if the urbs are deallocated between those two calls due to the device deinitialization or suspend, it is possible that ath9k_hif_usb_rx_stream() is not called next time and the allocated remain_skb is leaked. Our local Syzkaller instance was able to trigger that. remain_skb makes sense when receiving two consecutive urbs which are logically linked together, i.e. a specific data field from the first skb indicates a cached skb to be allocated, memcpy'd with some data and subsequently processed in the next call to ath9k_hif_usb_rx_stream(). Urbs deallocation supposedly makes that link irrelevant so we need to free the cached skb in those cases. Fix the leak by introducing a function to explicitly free remain_skb (if it is not NULL) when the rx urbs have been deallocated. remain_skb is NULL when it has not been allocated at all (hif_dev struct is kzalloced) or when it has been processed in next call to ath9k_hif_usb_rx_stream(). Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: skmsg: Skip zero length skb in sk_msg_recvmsg When running BPF selftests (./test_progs -t sockmap_basic) on a Loongarch platform, the following kernel panic occurs: [...] Oops[#1]: CPU: 22 PID: 2824 Comm: test_progs Tainted: G OE 6.10.0-rc2+ #18 Hardware name: LOONGSON Dabieshan/Loongson-TC542F0, BIOS Loongson-UDK2018 ... ... ra: 90000000048bf6c0 sk_msg_recvmsg+0x120/0x560 ERA: 9000000004162774 copy_page_to_iter+0x74/0x1c0 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 0000000c (PPLV0 +PIE +PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) BADV: 0000000000000040 PRID: 0014c011 (Loongson-64bit, Loongson-3C5000) Modules linked in: bpf_testmod(OE) xt_CHECKSUM xt_MASQUERADE xt_conntrack Process test_progs (pid: 2824, threadinfo=0000000000863a31, task=...) Stack : ... Call Trace: [<9000000004162774>] copy_page_to_iter+0x74/0x1c0 [<90000000048bf6c0>] sk_msg_recvmsg+0x120/0x560 [<90000000049f2b90>] tcp_bpf_recvmsg_parser+0x170/0x4e0 [<90000000049aae34>] inet_recvmsg+0x54/0x100 [<900000000481ad5c>] sock_recvmsg+0x7c/0xe0 [<900000000481e1a8>] __sys_recvfrom+0x108/0x1c0 [<900000000481e27c>] sys_recvfrom+0x1c/0x40 [<9000000004c076ec>] do_syscall+0x8c/0xc0 [<9000000003731da4>] handle_syscall+0xc4/0x160 Code: ... ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception Kernel relocated by 0x3510000 .text @ 0x9000000003710000 .data @ 0x9000000004d70000 .bss @ 0x9000000006469400 ---[ end Kernel panic - not syncing: Fatal exception ]--- [...] This crash happens every time when running sockmap_skb_verdict_shutdown subtest in sockmap_basic. This crash is because a NULL pointer is passed to page_address() in the sk_msg_recvmsg(). Due to the different implementations depending on the architecture, page_address(NULL) will trigger a panic on Loongarch platform but not on x86 platform. So this bug was hidden on x86 platform for a while, but now it is exposed on Loongarch platform. The root cause is that a zero length skb (skb->len == 0) was put on the queue. This zero length skb is a TCP FIN packet, which was sent by shutdown(), invoked in test_sockmap_skb_verdict_shutdown(): shutdown(p1, SHUT_WR); In this case, in sk_psock_skb_ingress_enqueue(), num_sge is zero, and no page is put to this sge (see sg_set_page in sg_set_page), but this empty sge is queued into ingress_msg list. And in sk_msg_recvmsg(), this empty sge is used, and a NULL page is got by sg_page(sge). Pass this NULL page to copy_page_to_iter(), which passes it to kmap_local_page() and to page_address(), then kernel panics. To solve this, we should skip this zero length skb. So in sk_msg_recvmsg(), if copy is zero, that means it's a zero length skb, skip invoking copy_page_to_iter(). We are using the EFAULT return triggered by copy_page_to_iter to check for is_fin in tcp_bpf.c.

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Init the count variable in collecting hot-reset devices The count variable is used without initialization, it results in mistakes in the device counting and crashes the userspace if the get hot reset info path is triggered.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: Fix suspicious rcu_dereference_protected() When destroying all sets, we are either in pernet exit phase or are executing a "destroy all sets command" from userspace. The latter was taken into account in ip_set_dereference() (nfnetlink mutex is held), but the former was not. The patch adds the required check to rcu_dereference_protected() in ip_set_dereference().

In the Linux kernel, the following vulnerability has been resolved: MIPS: Octeon: Add PCIe link status check The standard PCIe configuration read-write interface is used to access the configuration space of the peripheral PCIe devices of the mips processor after the PCIe link surprise down, it can generate kernel panic caused by "Data bus error". So it is necessary to add PCIe link status check for system protection. When the PCIe link is down or in training, assigning a value of 0 to the configuration address can prevent read-write behavior to the configuration space of peripheral PCIe devices, thereby preventing kernel panic.

In the Linux kernel, the following vulnerability has been resolved: tracing: Silence warning when chunk allocation fails in trace_pid_write Syzkaller trigger a fault injection warning: WARNING: CPU: 1 PID: 12326 at tracepoint_add_func+0xbfc/0xeb0 Modules linked in: CPU: 1 UID: 0 PID: 12326 Comm: syz.6.10325 Tainted: G U 6.14.0-rc5-syzkaller #0 Tainted: [U]=USER Hardware name: Google Compute Engine/Google Compute Engine RIP: 0010:tracepoint_add_func+0xbfc/0xeb0 kernel/tracepoint.c:294 Code: 09 fe ff 90 0f 0b 90 0f b6 74 24 43 31 ff 41 bc ea ff ff ff RSP: 0018:ffffc9000414fb48 EFLAGS: 00010283 RAX: 00000000000012a1 RBX: ffffffff8e240ae0 RCX: ffffc90014b78000 RDX: 0000000000080000 RSI: ffffffff81bbd78b RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffffffffffffffef R13: 0000000000000000 R14: dffffc0000000000 R15: ffffffff81c264f0 FS: 00007f27217f66c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2e80dff8 CR3: 00000000268f8000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tracepoint_probe_register_prio+0xc0/0x110 kernel/tracepoint.c:464 register_trace_prio_sched_switch include/trace/events/sched.h:222 [inline] register_pid_events kernel/trace/trace_events.c:2354 [inline] event_pid_write.isra.0+0x439/0x7a0 kernel/trace/trace_events.c:2425 vfs_write+0x24c/0x1150 fs/read_write.c:677 ksys_write+0x12b/0x250 fs/read_write.c:731 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f We can reproduce the warning by following the steps below: 1. echo 8 >> set_event_notrace_pid. Let tr->filtered_pids owns one pid and register sched_switch tracepoint. 2. echo ' ' >> set_event_pid, and perform fault injection during chunk allocation of trace_pid_list_alloc. Let pid_list with no pid and assign to tr->filtered_pids. 3. echo ' ' >> set_event_pid. Let pid_list is NULL and assign to tr->filtered_pids. 4. echo 9 >> set_event_pid, will trigger the double register sched_switch tracepoint warning. The reason is that syzkaller injects a fault into the chunk allocation in trace_pid_list_alloc, causing a failure in trace_pid_list_set, which may trigger double register of the same tracepoint. This only occurs when the system is about to crash, but to suppress this warning, let's add failure handling logic to trace_pid_list_set.