An issue was discovered in net/netfilter/nf_tables_api.c in the Linux kernel before 5.19.6. A denial of service can occur upon binding to an already bound chain.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists() We can trigger a slab-out-of-bounds with the following commands: mkfs.ext4 -F /dev/$disk 10G mount /dev/$disk /tmp/test echo 2147483647 > /sys/fs/ext4/$disk/mb_group_prealloc echo test > /tmp/test/file && sync ================================================================== BUG: KASAN: slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4] Read of size 8 at addr ffff888121b9d0f0 by task kworker/u2:0/11 CPU: 0 PID: 11 Comm: kworker/u2:0 Tainted: GL 6.7.0-next-20240118 #521 Call Trace: dump_stack_lvl+0x2c/0x50 kasan_report+0xb6/0xf0 ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4] ext4_mb_regular_allocator+0x19e9/0x2370 [ext4] ext4_mb_new_blocks+0x88a/0x1370 [ext4] ext4_ext_map_blocks+0x14f7/0x2390 [ext4] ext4_map_blocks+0x569/0xea0 [ext4] ext4_do_writepages+0x10f6/0x1bc0 [ext4] [...] ================================================================== The flow of issue triggering is as follows: // Set s_mb_group_prealloc to 2147483647 via sysfs ext4_mb_new_blocks ext4_mb_normalize_request ext4_mb_normalize_group_request ac->ac_g_ex.fe_len = EXT4_SB(sb)->s_mb_group_prealloc ext4_mb_regular_allocator ext4_mb_choose_next_group ext4_mb_choose_next_group_best_avail mb_avg_fragment_size_order order = fls(len) - 2 = 29 ext4_mb_find_good_group_avg_frag_lists frag_list = &sbi->s_mb_avg_fragment_size[order] if (list_empty(frag_list)) // Trigger SOOB! At 4k block size, the length of the s_mb_avg_fragment_size list is 14, but an oversized s_mb_group_prealloc is set, causing slab-out-of-bounds to be triggered by an attempt to access an element at index 29. Add a new attr_id attr_clusters_in_group with values in the range [0, sbi->s_clusters_per_group] and declare mb_group_prealloc as that type to fix the issue. In addition avoid returning an order from mb_avg_fragment_size_order() greater than MB_NUM_ORDERS(sb) and reduce some useless loops.

In the Linux kernel, the following vulnerability has been resolved: net/rds: fix NULL deref in rds_ib_send_cqe_handler() on masked atomic completion rds_ib_xmit_atomic() always programs a masked atomic opcode (IB_WR_MASKED_ATOMIC_CMP_AND_SWP or IB_WR_MASKED_ATOMIC_FETCH_AND_ADD) for every RDS atomic cmsg. But the completion-side switch in rds_ib_send_unmap_op() only handles the non-masked opcodes, so a masked atomic completion falls through to default and returns rm == NULL while send->s_op is left set. rds_ib_send_cqe_handler() then dereferences the NULL rm via rm->m_final_op, oopsing in softirq context. An unprivileged AF_RDS sendmsg() of an atomic cmsg over an active RDS/IB connection triggers it; on hardware that natively accepts masked atomics (mlx4, mlx5) no extra setup is needed. RDS/IB: rds_ib_send_unmap_op: unexpected opcode 0xd in WR! Oops: general protection fault [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000190-0x0000000000000197] RIP: rds_ib_send_cqe_handler+0x25c/0xb10 (net/rds/ib_send.c:282) Call Trace: <IRQ> rds_ib_send_cqe_handler (net/rds/ib_send.c:282) poll_scq (net/rds/ib_cm.c:274) rds_ib_tasklet_fn_send (net/rds/ib_cm.c:294) tasklet_action_common (kernel/softirq.c:943) handle_softirqs (kernel/softirq.c:573) run_ksoftirqd (kernel/softirq.c:479) </IRQ> Kernel panic - not syncing: Fatal exception in interrupt Handle the masked atomic opcodes in the same case as the non-masked ones: they map to the same struct rds_message.atomic union member, so the existing container_of()/rds_ib_send_unmap_atomic() body is correct for them.

In the Linux kernel, the following vulnerability has been resolved: fsdax: force clear dirty mark if CoW XFS allows CoW on non-shared extents to combat fragmentation[1]. The old non-shared extent could be mwrited before, its dax entry is marked dirty. This results in a WARNing: [ 28.512349] ------------[ cut here ]------------ [ 28.512622] WARNING: CPU: 2 PID: 5255 at fs/dax.c:390 dax_insert_entry+0x342/0x390 [ 28.513050] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache netfs nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables [ 28.515462] CPU: 2 PID: 5255 Comm: fsstress Kdump: loaded Not tainted 6.3.0-rc1-00001-g85e1481e19c1-dirty #117 [ 28.515902] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.1-1-1 04/01/2014 [ 28.516307] RIP: 0010:dax_insert_entry+0x342/0x390 [ 28.516536] Code: 30 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 45 20 48 83 c0 01 e9 e2 fe ff ff 48 8b 45 20 48 83 c0 01 e9 cd fe ff ff <0f> 0b e9 53 ff ff ff 48 8b 7c 24 08 31 f6 e8 1b 61 a1 00 eb 8c 48 [ 28.517417] RSP: 0000:ffffc9000845fb18 EFLAGS: 00010086 [ 28.517721] RAX: 0000000000000053 RBX: 0000000000000155 RCX: 000000000018824b [ 28.518113] RDX: 0000000000000000 RSI: ffffffff827525a6 RDI: 00000000ffffffff [ 28.518515] RBP: ffffea00062092c0 R08: 0000000000000000 R09: ffffc9000845f9c8 [ 28.518905] R10: 0000000000000003 R11: ffffffff82ddb7e8 R12: 0000000000000155 [ 28.519301] R13: 0000000000000000 R14: 000000000018824b R15: ffff88810cfa76b8 [ 28.519703] FS: 00007f14a0c94740(0000) GS:ffff88817bd00000(0000) knlGS:0000000000000000 [ 28.520148] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 28.520472] CR2: 00007f14a0c8d000 CR3: 000000010321c004 CR4: 0000000000770ee0 [ 28.520863] PKRU: 55555554 [ 28.521043] Call Trace: [ 28.521219] <TASK> [ 28.521368] dax_fault_iter+0x196/0x390 [ 28.521595] dax_iomap_pte_fault+0x19b/0x3d0 [ 28.521852] __xfs_filemap_fault+0x234/0x2b0 [ 28.522116] __do_fault+0x30/0x130 [ 28.522334] do_fault+0x193/0x340 [ 28.522586] __handle_mm_fault+0x2d3/0x690 [ 28.522975] handle_mm_fault+0xe6/0x2c0 [ 28.523259] do_user_addr_fault+0x1bc/0x6f0 [ 28.523521] exc_page_fault+0x60/0x140 [ 28.523763] asm_exc_page_fault+0x22/0x30 [ 28.524001] RIP: 0033:0x7f14a0b589ca [ 28.524225] Code: c5 fe 7f 07 c5 fe 7f 47 20 c5 fe 7f 47 40 c5 fe 7f 47 60 c5 f8 77 c3 66 0f 1f 84 00 00 00 00 00 40 0f b6 c6 48 89 d1 48 89 fa <f3> aa 48 89 d0 c5 f8 77 c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 [ 28.525198] RSP: 002b:00007fff1dea1c98 EFLAGS: 00010202 [ 28.525505] RAX: 000000000000001e RBX: 000000000014a000 RCX: 0000000000006046 [ 28.525895] RDX: 00007f14a0c82000 RSI: 000000000000001e RDI: 00007f14a0c8d000 [ 28.526290] RBP: 000000000000006f R08: 0000000000000004 R09: 000000000014a000 [ 28.526681] R10: 0000000000000008 R11: 0000000000000246 R12: 028f5c28f5c28f5c [ 28.527067] R13: 8f5c28f5c28f5c29 R14: 0000000000011046 R15: 00007f14a0c946c0 [ 28.527449] </TASK> [ 28.527600] ---[ end trace 0000000000000000 ]--- To be able to delete this entry, clear its dirty mark before invalidate_inode_pages2_range(). [1] https://lore.kernel.org/linux-xfs/20230321151339.GA11376@frogsfrogsfrogs/

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix a BUG in rt6_get_pcpu_route() under PREEMPT_RT On PREEMPT_RT kernels, after rt6_get_pcpu_route() returns NULL, the current task can be preempted. Another task running on the same CPU may then execute rt6_make_pcpu_route() and successfully install a pcpu_rt entry. When the first task resumes execution, its cmpxchg() in rt6_make_pcpu_route() will fail because rt6i_pcpu is no longer NULL, triggering the BUG_ON(prev). It's easy to reproduce it by adding mdelay() after rt6_get_pcpu_route(). Using preempt_disable/enable is not appropriate here because ip6_rt_pcpu_alloc() may sleep. Fix this by handling the cmpxchg() failure gracefully on PREEMPT_RT: free our allocation and return the existing pcpu_rt installed by another task. The BUG_ON is replaced by WARN_ON_ONCE for non-PREEMPT_RT kernels where such races should not occur.

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-core: care NULL dirver name on snd_soc_lookup_component_nolocked() soc-generic-dmaengine-pcm.c uses same dev for both CPU and Platform. In such case, CPU component driver might not have driver->name, then snd_soc_lookup_component_nolocked() will be NULL pointer access error. Care NULL driver name. Call trace: strcmp from snd_soc_lookup_component_nolocked+0x64/0xa4 snd_soc_lookup_component_nolocked from snd_soc_unregister_component_by_driver+0x2c/0x44 snd_soc_unregister_component_by_driver from snd_dmaengine_pcm_unregister+0x28/0x64 snd_dmaengine_pcm_unregister from devres_release_all+0x98/0xfc devres_release_all from device_unbind_cleanup+0xc/0x60 device_unbind_cleanup from really_probe+0x220/0x2c8 really_probe from __driver_probe_device+0x88/0x1a0 __driver_probe_device from driver_probe_device+0x30/0x110 driver_probe_device from __driver_attach+0x90/0x178 __driver_attach from bus_for_each_dev+0x7c/0xcc bus_for_each_dev from bus_add_driver+0xcc/0x1ec bus_add_driver from driver_register+0x80/0x11c driver_register from do_one_initcall+0x58/0x23c do_one_initcall from kernel_init_freeable+0x198/0x1f4 kernel_init_freeable from kernel_init+0x1c/0x12c kernel_init from ret_from_fork+0x14/0x28

In the Linux kernel, the following vulnerability has been resolved: fs: ntfs3: check return value of indx_find to avoid infinite loop We found an infinite loop bug in the ntfs3 file system that can lead to a Denial-of-Service (DoS) condition. A malformed dentry in the ntfs3 filesystem can cause the kernel to hang during the lookup operations. By setting the HAS_SUB_NODE flag in an INDEX_ENTRY within a directory's INDEX_ALLOCATION block and manipulating the VCN pointer, an attacker can cause the indx_find() function to repeatedly read the same block, allocating 4 KB of memory each time. The kernel lacks VCN loop detection and depth limits, causing memory exhaustion and an OOM crash. This patch adds a return value check for fnd_push() to prevent a memory exhaustion vulnerability caused by infinite loops. When the index exceeds the size of the fnd->nodes array, fnd_push() returns -EINVAL. The indx_find() function checks this return value and stops processing, preventing further memory allocation.

In the Linux kernel, the following vulnerability has been resolved: bpf: reject unhashed sockets in bpf_sk_assign The semantics for bpf_sk_assign are as follows: sk = some_lookup_func() bpf_sk_assign(skb, sk) bpf_sk_release(sk) That is, the sk is not consumed by bpf_sk_assign. The function therefore needs to make sure that sk lives long enough to be consumed from __inet_lookup_skb. The path through the stack for a TCPv4 packet is roughly: netif_receive_skb_core: takes RCU read lock __netif_receive_skb_core: sch_handle_ingress: tcf_classify: bpf_sk_assign() deliver_ptype_list_skb: deliver_skb: ip_packet_type->func == ip_rcv: ip_rcv_core: ip_rcv_finish_core: dst_input: ip_local_deliver: ip_local_deliver_finish: ip_protocol_deliver_rcu: tcp_v4_rcv: __inet_lookup_skb: skb_steal_sock The existing helper takes advantage of the fact that everything happens in the same RCU critical section: for sockets with SOCK_RCU_FREE set bpf_sk_assign never takes a reference. skb_steal_sock then checks SOCK_RCU_FREE again and does sock_put if necessary. This approach assumes that SOCK_RCU_FREE is never set on a sk between bpf_sk_assign and skb_steal_sock, but this invariant is violated by unhashed UDP sockets. A new UDP socket is created in TCP_CLOSE state but without SOCK_RCU_FREE set. That flag is only added in udp_lib_get_port() which happens when a socket is bound. When bpf_sk_assign was added it wasn't possible to access unhashed UDP sockets from BPF, so this wasn't a problem. This changed in commit 0c48eefae712 ("sock_map: Lift socket state restriction for datagram sockets"), but the helper wasn't adjusted accordingly. The following sequence of events will therefore lead to a refcount leak: 1. Add socket(AF_INET, SOCK_DGRAM) to a sockmap. 2. Pull socket out of sockmap and bpf_sk_assign it. Since SOCK_RCU_FREE is not set we increment the refcount. 3. bind() or connect() the socket, setting SOCK_RCU_FREE. 4. skb_steal_sock will now set refcounted = false due to SOCK_RCU_FREE. 5. tcp_v4_rcv() skips sock_put(). Fix the problem by rejecting unhashed sockets in bpf_sk_assign(). This matches the behaviour of __inet_lookup_skb which is ultimately the goal of bpf_sk_assign().

In the Linux kernel, the following vulnerability has been resolved: smack: /smack/doi: accept previously used values Writing to /smack/doi a value that has ever been written there in the past disables networking for non-ambient labels. E.g. # cat /smack/doi 3 # netlabelctl -p cipso list Configured CIPSO mappings (1) DOI value : 3 mapping type : PASS_THROUGH # netlabelctl -p map list Configured NetLabel domain mappings (3) domain: "_" (IPv4) protocol: UNLABELED domain: DEFAULT (IPv4) protocol: CIPSO, DOI = 3 domain: DEFAULT (IPv6) protocol: UNLABELED # cat /smack/ambient _ # cat /proc/$$/attr/smack/current _ # ping -c1 10.1.95.12 64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.964 ms # echo foo >/proc/$$/attr/smack/current # ping -c1 10.1.95.12 64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.956 ms unknown option 86 # echo 4 >/smack/doi # echo 3 >/smack/doi !> [ 214.050395] smk_cipso_doi:691 cipso add rc = -17 # echo 3 >/smack/doi !> [ 249.402261] smk_cipso_doi:678 remove rc = -2 !> [ 249.402261] smk_cipso_doi:691 cipso add rc = -17 # ping -c1 10.1.95.12 !!> ping: 10.1.95.12: Address family for hostname not supported # echo _ >/proc/$$/attr/smack/current # ping -c1 10.1.95.12 64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.617 ms This happens because Smack keeps decommissioned DOIs, fails to re-add them, and consequently refuses to add the “default” domain map: # netlabelctl -p cipso list Configured CIPSO mappings (2) DOI value : 3 mapping type : PASS_THROUGH DOI value : 4 mapping type : PASS_THROUGH # netlabelctl -p map list Configured NetLabel domain mappings (2) domain: "_" (IPv4) protocol: UNLABELED !> (no ipv4 map for default domain here) domain: DEFAULT (IPv6) protocol: UNLABELED Fix by clearing decommissioned DOI definitions and serializing concurrent DOI updates with a new lock. Also: - allow /smack/doi to live unconfigured, since adding a map (netlbl_cfg_cipsov4_map_add) may fail. CIPSO_V4_DOI_UNKNOWN(0) indicates the unconfigured DOI - add new DOI before removing the old default map, so the old map remains if the add fails (2008-02-04, Casey Schaufler)

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Track xmit submission to PTP WQ after populating metadata map Ensure the skb is available in metadata mapping to skbs before tracking the metadata index for detecting undelivered CQEs. If the metadata index is put in the tracking list before putting the skb in the map, the metadata index might be used for detecting undelivered CQEs before the relevant skb is available in the map, which can lead to a null-ptr-deref. Log: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 0 PID: 1243 Comm: kworker/0:2 Not tainted 6.6.0-rc4+ #108 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: events mlx5e_rx_dim_work [mlx5_core] RIP: 0010:mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core] Code: 8c 24 38 cc ff ff 4c 8d 3c c1 4c 89 f9 48 c1 e9 03 42 80 3c 31 00 0f 85 97 0f 00 00 4d 8b 3f 49 8d 7f 28 48 89 f9 48 c1 e9 03 <42> 80 3c 31 00 0f 85 8b 0f 00 00 49 8b 47 28 48 85 c0 0f 84 05 07 RSP: 0018:ffff8884d3c09c88 EFLAGS: 00010206 RAX: 0000000000000069 RBX: ffff8881160349d8 RCX: 0000000000000005 RDX: ffffed10218f48cf RSI: 0000000000000004 RDI: 0000000000000028 RBP: ffff888122707700 R08: 0000000000000001 R09: ffffed109a781383 R10: 0000000000000003 R11: 0000000000000003 R12: ffff88810c7a7a40 R13: ffff888122707700 R14: dffffc0000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8884d3c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4f878dd6e0 CR3: 000000014d108002 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? die_addr+0x3c/0xa0 ? exc_general_protection+0x144/0x210 ? asm_exc_general_protection+0x22/0x30 ? mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core] ? mlx5e_ptp_napi_poll+0x8f6/0x2290 [mlx5_core] __napi_poll.constprop.0+0xa4/0x580 net_rx_action+0x460/0xb80 ? _raw_spin_unlock_irqrestore+0x32/0x60 ? __napi_poll.constprop.0+0x580/0x580 ? tasklet_action_common.isra.0+0x2ef/0x760 __do_softirq+0x26c/0x827 irq_exit_rcu+0xc2/0x100 common_interrupt+0x7f/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:__kmem_cache_alloc_node+0xb/0x330 Code: 41 5d 41 5e 41 5f c3 8b 44 24 14 8b 4c 24 10 09 c8 eb d5 e8 b7 43 ca 01 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 <41> 56 41 89 d6 41 55 41 89 f5 41 54 49 89 fc 53 48 83 e4 f0 48 83 RSP: 0018:ffff88812c4079c0 EFLAGS: 00000246 RAX: 1ffffffff083c7fe RBX: ffff888100042dc0 RCX: 0000000000000218 RDX: 00000000ffffffff RSI: 0000000000000dc0 RDI: ffff888100042dc0 RBP: ffff88812c4079c8 R08: ffffffffa0289f96 R09: ffffed1025880ea9 R10: ffff888138839f80 R11: 0000000000000002 R12: 0000000000000dc0 R13: 0000000000000100 R14: 000000000000008c R15: ffff8881271fc450 ? cmd_exec+0x796/0x2200 [mlx5_core] kmalloc_trace+0x26/0xc0 cmd_exec+0x796/0x2200 [mlx5_core] mlx5_cmd_do+0x22/0xc0 [mlx5_core] mlx5_cmd_exec+0x17/0x30 [mlx5_core] mlx5_core_modify_cq_moderation+0x139/0x1b0 [mlx5_core] ? mlx5_add_cq_to_tasklet+0x280/0x280 [mlx5_core] ? lockdep_set_lock_cmp_fn+0x190/0x190 ? process_one_work+0x659/0x1220 mlx5e_rx_dim_work+0x9d/0x100 [mlx5_core] process_one_work+0x730/0x1220 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? max_active_store+0xf0/0xf0 ? assign_work+0x168/0x240 worker_thread+0x70f/0x12d0 ? __kthread_parkme+0xd1/0x1d0 ? process_one_work+0x1220/0x1220 kthread+0x2d9/0x3b0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_as ---truncated---

In the Linux kernel, the following vulnerability has been resolved: Fix page corruption caused by racy check in __free_pages When we upgraded our kernel, we started seeing some page corruption like the following consistently: BUG: Bad page state in process ganesha.nfsd pfn:1304ca page:0000000022261c55 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 pfn:0x1304ca flags: 0x17ffffc0000000() raw: 0017ffffc0000000 ffff8a513ffd4c98 ffffeee24b35ec08 0000000000000000 raw: 0000000000000000 0000000000000001 00000000ffffff7f 0000000000000000 page dumped because: nonzero mapcount CPU: 0 PID: 15567 Comm: ganesha.nfsd Kdump: loaded Tainted: P B O 5.10.158-1.nutanix.20221209.el7.x86_64 #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016 Call Trace: dump_stack+0x74/0x96 bad_page.cold+0x63/0x94 check_new_page_bad+0x6d/0x80 rmqueue+0x46e/0x970 get_page_from_freelist+0xcb/0x3f0 ? _cond_resched+0x19/0x40 __alloc_pages_nodemask+0x164/0x300 alloc_pages_current+0x87/0xf0 skb_page_frag_refill+0x84/0x110 ... Sometimes, it would also show up as corruption in the free list pointer and cause crashes. After bisecting the issue, we found the issue started from commit e320d3012d25 ("mm/page_alloc.c: fix freeing non-compound pages"): if (put_page_testzero(page)) free_the_page(page, order); else if (!PageHead(page)) while (order-- > 0) free_the_page(page + (1 << order), order); So the problem is the check PageHead is racy because at this point we already dropped our reference to the page. So even if we came in with compound page, the page can already be freed and PageHead can return false and we will end up freeing all the tail pages causing double free.

In the Linux kernel, the following vulnerability has been resolved: memory: mtk-smi: fix device leak on larb probe Make sure to drop the reference taken when looking up the SMI device during larb probe on late probe failure (e.g. probe deferral) and on driver unbind.

In the Linux kernel, the following vulnerability has been resolved: md/raid10: wait barrier before returning discard request with REQ_NOWAIT raid10_handle_discard should wait barrier before returning a discard bio which has REQ_NOWAIT. And there is no need to print warning calltrace if a discard bio has REQ_NOWAIT flag. Quality engineer usually checks dmesg and reports error if dmesg has warning/error calltrace.

In the Linux kernel, the following vulnerability has been resolved: bpf: Add BPF_PROG_TYPE_CGROUP_SKB attach type enforcement in BPF_LINK_CREATE bpf_prog_attach uses attach_type_to_prog_type to enforce proper attach type for BPF_PROG_TYPE_CGROUP_SKB. link_create uses bpf_prog_get and relies on bpf_prog_attach_check_attach_type to properly verify prog_type <> attach_type association. Add missing attach_type enforcement for the link_create case. Otherwise, it's currently possible to attach cgroup_skb prog types to other cgroup hooks.

In the Linux kernel, the following vulnerability has been resolved: x86/vmscape: Add conditional IBPB mitigation VMSCAPE is a vulnerability that exploits insufficient branch predictor isolation between a guest and a userspace hypervisor (like QEMU). Existing mitigations already protect kernel/KVM from a malicious guest. Userspace can additionally be protected by flushing the branch predictors after a VMexit. Since it is the userspace that consumes the poisoned branch predictors, conditionally issue an IBPB after a VMexit and before returning to userspace. Workloads that frequently switch between hypervisor and userspace will incur the most overhead from the new IBPB. This new IBPB is not integrated with the existing IBPB sites. For instance, a task can use the existing speculation control prctl() to get an IBPB at context switch time. With this implementation, the IBPB is doubled up: one at context switch and another before running userspace. The intent is to integrate and optimize these cases post-embargo. [ dhansen: elaborate on suboptimal IBPB solution ]

In the Linux kernel, the following vulnerability has been resolved: devlink: rate: Unset parent pointer in devl_rate_nodes_destroy The function devl_rate_nodes_destroy is documented to "Unset parent for all rate objects". However, it was only calling the driver-specific `rate_leaf_parent_set` or `rate_node_parent_set` ops and decrementing the parent's refcount, without actually setting the `devlink_rate->parent` pointer to NULL. This leaves a dangling pointer in the `devlink_rate` struct, which cause refcount error in netdevsim[1] and mlx5[2]. In addition, this is inconsistent with the behavior of `devlink_nl_rate_parent_node_set`, where the parent pointer is correctly cleared. This patch fixes the issue by explicitly setting `devlink_rate->parent` to NULL after notifying the driver, thus fulfilling the function's documented behavior for all rate objects. [1] repro steps: echo 1 > /sys/bus/netdevsim/new_device devlink dev eswitch set netdevsim/netdevsim1 mode switchdev echo 1 > /sys/bus/netdevsim/devices/netdevsim1/sriov_numvfs devlink port function rate add netdevsim/netdevsim1/test_node devlink port function rate set netdevsim/netdevsim1/128 parent test_node echo 1 > /sys/bus/netdevsim/del_device dmesg: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 8 PID: 1530 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0 CPU: 8 UID: 0 PID: 1530 Comm: bash Not tainted 6.18.0-rc4+ #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0x42/0xe0 Call Trace: <TASK> devl_rate_leaf_destroy+0x8d/0x90 __nsim_dev_port_del+0x6c/0x70 [netdevsim] nsim_dev_reload_destroy+0x11c/0x140 [netdevsim] nsim_drv_remove+0x2b/0xb0 [netdevsim] device_release_driver_internal+0x194/0x1f0 bus_remove_device+0xc6/0x130 device_del+0x159/0x3c0 device_unregister+0x1a/0x60 del_device_store+0x111/0x170 [netdevsim] kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x55/0x10f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] devlink dev eswitch set pci/0000:08:00.0 mode switchdev devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 1000 devlink port function rate add pci/0000:08:00.0/group1 devlink port function rate set pci/0000:08:00.0/32768 parent group1 modprobe -r mlx5_ib mlx5_fwctl mlx5_core dmesg: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 7 PID: 16151 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0 CPU: 7 UID: 0 PID: 16151 Comm: bash Not tainted 6.17.0-rc7_for_upstream_min_debug_2025_10_02_12_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0x42/0xe0 Call Trace: <TASK> devl_rate_leaf_destroy+0x8d/0x90 mlx5_esw_offloads_devlink_port_unregister+0x33/0x60 [mlx5_core] mlx5_esw_offloads_unload_rep+0x3f/0x50 [mlx5_core] mlx5_eswitch_unload_sf_vport+0x40/0x90 [mlx5_core] mlx5_sf_esw_event+0xc4/0x120 [mlx5_core] notifier_call_chain+0x33/0xa0 blocking_notifier_call_chain+0x3b/0x50 mlx5_eswitch_disable_locked+0x50/0x110 [mlx5_core] mlx5_eswitch_disable+0x63/0x90 [mlx5_core] mlx5_unload+0x1d/0x170 [mlx5_core] mlx5_uninit_one+0xa2/0x130 [mlx5_core] remove_one+0x78/0xd0 [mlx5_core] pci_device_remove+0x39/0xa0 device_release_driver_internal+0x194/0x1f0 unbind_store+0x99/0xa0 kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x53/0x1f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53

In the Linux kernel, the following vulnerability has been resolved: net: gso: Forbid IPv6 TSO with extensions on devices with only IPV6_CSUM When performing Generic Segmentation Offload (GSO) on an IPv6 packet that contains extension headers, the kernel incorrectly requests checksum offload if the egress device only advertises NETIF_F_IPV6_CSUM feature, which has a strict contract: it supports checksum offload only for plain TCP or UDP over IPv6 and explicitly does not support packets with extension headers. The current GSO logic violates this contract by failing to disable the feature for packets with extension headers, such as those used in GREoIPv6 tunnels. This violation results in the device being asked to perform an operation it cannot support, leading to a `skb_warn_bad_offload` warning and a collapse of network throughput. While device TSO/USO is correctly bypassed in favor of software GSO for these packets, the GSO stack must be explicitly told not to request checksum offload. Mask NETIF_F_IPV6_CSUM, NETIF_F_TSO6 and NETIF_F_GSO_UDP_L4 in gso_features_check if the IPv6 header contains extension headers to compute checksum in software. The exception is a BIG TCP extension, which, as stated in commit 68e068cabd2c6c53 ("net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets"): "The feature is only enabled on devices that support BIG TCP TSO. The header is only present for PF_PACKET taps like tcpdump, and not transmitted by physical devices." kernel log output (truncated): WARNING: CPU: 1 PID: 5273 at net/core/dev.c:3535 skb_warn_bad_offload+0x81/0x140 ... Call Trace: <TASK> skb_checksum_help+0x12a/0x1f0 validate_xmit_skb+0x1a3/0x2d0 validate_xmit_skb_list+0x4f/0x80 sch_direct_xmit+0x1a2/0x380 __dev_xmit_skb+0x242/0x670 __dev_queue_xmit+0x3fc/0x7f0 ip6_finish_output2+0x25e/0x5d0 ip6_finish_output+0x1fc/0x3f0 ip6_tnl_xmit+0x608/0xc00 [ip6_tunnel] ip6gre_tunnel_xmit+0x1c0/0x390 [ip6_gre] dev_hard_start_xmit+0x63/0x1c0 __dev_queue_xmit+0x6d0/0x7f0 ip6_finish_output2+0x214/0x5d0 ip6_finish_output+0x1fc/0x3f0 ip6_xmit+0x2ca/0x6f0 ip6_finish_output+0x1fc/0x3f0 ip6_xmit+0x2ca/0x6f0 inet6_csk_xmit+0xeb/0x150 __tcp_transmit_skb+0x555/0xa80 tcp_write_xmit+0x32a/0xe90 tcp_sendmsg_locked+0x437/0x1110 tcp_sendmsg+0x2f/0x50 ... skb linear: 00000000: e4 3d 1a 7d ec 30 e4 3d 1a 7e 5d 90 86 dd 60 0e skb linear: 00000010: 00 0a 1b 34 3c 40 20 11 00 00 00 00 00 00 00 00 skb linear: 00000020: 00 00 00 00 00 12 20 11 00 00 00 00 00 00 00 00 skb linear: 00000030: 00 00 00 00 00 11 2f 00 04 01 04 01 01 00 00 00 skb linear: 00000040: 86 dd 60 0e 00 0a 1b 00 06 40 20 23 00 00 00 00 skb linear: 00000050: 00 00 00 00 00 00 00 00 00 12 20 23 00 00 00 00 skb linear: 00000060: 00 00 00 00 00 00 00 00 00 11 bf 96 14 51 13 f9 skb linear: 00000070: ae 27 a0 a8 2b e3 80 18 00 40 5b 6f 00 00 01 01 skb linear: 00000080: 08 0a 42 d4 50 d5 4b 70 f8 1a

In the Linux kernel, the following vulnerability has been resolved: parisc: Revise __get_user() to probe user read access Because of the way read access support is implemented, read access interruptions are only triggered at privilege levels 2 and 3. The kernel executes at privilege level 0, so __get_user() never triggers a read access interruption (code 26). Thus, it is currently possible for user code to access a read protected address via a system call. Fix this by probing read access rights at privilege level 3 (PRIV_USER) and setting __gu_err to -EFAULT (-14) if access isn't allowed. Note the cmpiclr instruction does a 32-bit compare because COND macro doesn't work inside asm.

In the Linux kernel, the following vulnerability has been resolved: rcutorture: Fix rcutorture_one_extend_check() splat in RT kernels For built with CONFIG_PREEMPT_RT=y kernels, running rcutorture tests resulted in the following splat: [ 68.797425] rcutorture_one_extend_check during change: Current 0x1 To add 0x1 To remove 0x0 preempt_count() 0x0 [ 68.797533] WARNING: CPU: 2 PID: 512 at kernel/rcu/rcutorture.c:1993 rcutorture_one_extend_check+0x419/0x560 [rcutorture] [ 68.797601] Call Trace: [ 68.797602] <TASK> [ 68.797619] ? lockdep_softirqs_off+0xa5/0x160 [ 68.797631] rcutorture_one_extend+0x18e/0xcc0 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c] [ 68.797646] ? local_clock+0x19/0x40 [ 68.797659] rcu_torture_one_read+0xf0/0x280 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c] [ 68.797678] ? __pfx_rcu_torture_one_read+0x10/0x10 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c] [ 68.797804] ? __pfx_rcu_torture_timer+0x10/0x10 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c] [ 68.797815] rcu-torture: rcu_torture_reader task started [ 68.797824] rcu-torture: Creating rcu_torture_reader task [ 68.797824] rcu_torture_reader+0x238/0x580 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c] [ 68.797836] ? kvm_sched_clock_read+0x15/0x30 Disable BH does not change the SOFTIRQ corresponding bits in preempt_count() for RT kernels, this commit therefore use softirq_count() to check the if BH is disabled.

In the Linux kernel, the following vulnerability has been resolved: fbdev: imxfb: Check fb_add_videomode to prevent null-ptr-deref fb_add_videomode() can fail with -ENOMEM when its internal kmalloc() cannot allocate a struct fb_modelist. If that happens, the modelist stays empty but the driver continues to register. Add a check for its return value to prevent poteintial null-ptr-deref, which is similar to the commit 17186f1f90d3 ("fbdev: Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var").

In the Linux kernel, the following vulnerability has been resolved: nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails Have nvmet_req_init() and req->execute() complete failed commands. Description of the problem: nvmet_req_init() calls __nvmet_req_complete() internally upon failure, e.g., unsupported opcode, which calls the "queue_response" callback, this results in nvmet_pci_epf_queue_response() being called, which will call nvmet_pci_epf_complete_iod() if data_len is 0 or if dma_dir is different from DMA_TO_DEVICE. This results in a double completion as nvmet_pci_epf_exec_iod_work() also calls nvmet_pci_epf_complete_iod() when nvmet_req_init() fails. Steps to reproduce: On the host send a command with an unsupported opcode with nvme-cli, For example the admin command "security receive" $ sudo nvme security-recv /dev/nvme0n1 -n1 -x4096 This triggers a double completion as nvmet_req_init() fails and nvmet_pci_epf_queue_response() is called, here iod->dma_dir is still in the default state of "DMA_NONE" as set by default in nvmet_pci_epf_alloc_iod(), so nvmet_pci_epf_complete_iod() is called. Because nvmet_req_init() failed nvmet_pci_epf_complete_iod() is also called in nvmet_pci_epf_exec_iod_work() leading to a double completion. This not only sends two completions to the host but also corrupts the state of the PCI NVMe target leading to kernel oops. This patch lets nvmet_req_init() and req->execute() complete all failed commands, and removes the double completion case in nvmet_pci_epf_exec_iod_work() therefore fixing the edge cases where double completions occurred.

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix the sendmsg byte count in siw_tcp_sendpages Ever since commit c2ff29e99a76 ("siw: Inline do_tcp_sendpages()"), we have been doing this: static int siw_tcp_sendpages(struct socket *s, struct page **page, int offset, size_t size) [...] /* Calculate the number of bytes we need to push, for this page * specifically */ size_t bytes = min_t(size_t, PAGE_SIZE - offset, size); /* If we can't splice it, then copy it in, as normal */ if (!sendpage_ok(page[i])) msg.msg_flags &= ~MSG_SPLICE_PAGES; /* Set the bvec pointing to the page, with len $bytes */ bvec_set_page(&bvec, page[i], bytes, offset); /* Set the iter to $size, aka the size of the whole sendpages (!!!) */ iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, &bvec, 1, size); try_page_again: lock_sock(sk); /* Sendmsg with $size size (!!!) */ rv = tcp_sendmsg_locked(sk, &msg, size); This means we've been sending oversized iov_iters and tcp_sendmsg calls for a while. This has a been a benign bug because sendpage_ok() always returned true. With the recent slab allocator changes being slowly introduced into next (that disallow sendpage on large kmalloc allocations), we have recently hit out-of-bounds crashes, due to slight differences in iov_iter behavior between the MSG_SPLICE_PAGES and "regular" copy paths: (MSG_SPLICE_PAGES) skb_splice_from_iter iov_iter_extract_pages iov_iter_extract_bvec_pages uses i->nr_segs to correctly stop in its tracks before OoB'ing everywhere skb_splice_from_iter gets a "short" read (!MSG_SPLICE_PAGES) skb_copy_to_page_nocache copy=iov_iter_count [...] copy_from_iter /* this doesn't help */ if (unlikely(iter->count < len)) len = iter->count; iterate_bvec ... and we run off the bvecs Fix this by properly setting the iov_iter's byte count, plus sending the correct byte count to tcp_sendmsg_locked.

In the Linux kernel, the following vulnerability has been resolved: arm64: kexec: initialize kexec_buf struct in load_other_segments() Patch series "kexec: Fix invalid field access". The kexec_buf structure was previously declared without initialization. commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly") added a field that is always read but not consistently populated by all architectures. This un-initialized field will contain garbage. This is also triggering a UBSAN warning when the uninitialized data was accessed: ------------[ cut here ]------------ UBSAN: invalid-load in ./include/linux/kexec.h:210:10 load of value 252 is not a valid value for type '_Bool' Zero-initializing kexec_buf at declaration ensures all fields are cleanly set, preventing future instances of uninitialized memory being used. An initial fix was already landed for arm64[0], and this patchset fixes the problem on the remaining arm64 code and on riscv, as raised by Mark. Discussions about this problem could be found at[1][2]. This patch (of 3): The kexec_buf structure was previously declared without initialization. commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly") added a field that is always read but not consistently populated by all architectures. This un-initialized field will contain garbage. This is also triggering a UBSAN warning when the uninitialized data was accessed: ------------[ cut here ]------------ UBSAN: invalid-load in ./include/linux/kexec.h:210:10 load of value 252 is not a valid value for type '_Bool' Zero-initializing kexec_buf at declaration ensures all fields are cleanly set, preventing future instances of uninitialized memory being used.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null pointer check in mod_hdcp_hdcp1_create_session() The function mod_hdcp_hdcp1_create_session() calls the function get_first_active_display(), but does not check its return value. The return value is a null pointer if the display list is empty. This will lead to a null pointer dereference. Add a null pointer check for get_first_active_display() and return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null. This is similar to the commit c3e9826a2202 ("drm/amd/display: Add null pointer check for get_first_active_display()"). (cherry picked from commit 5e43eb3cd731649c4f8b9134f857be62a416c893)

In the Linux kernel, the following vulnerability has been resolved: mm/damon/lru_sort: avoid divide-by-zero in damon_lru_sort_apply_parameters() Patch series "mm/damon: avoid divide-by-zero in DAMON module's parameters application". DAMON's RECLAIM and LRU_SORT modules perform no validation on user-configured parameters during application, which may lead to division-by-zero errors. Avoid the divide-by-zero by adding validation checks when DAMON modules attempt to apply the parameters. This patch (of 2): During the calculation of 'hot_thres' and 'cold_thres', either 'sample_interval' or 'aggr_interval' is used as the divisor, which may lead to division-by-zero errors. Fix it by directly returning -EINVAL when such a case occurs. Additionally, since 'aggr_interval' is already required to be set no smaller than 'sample_interval' in damon_set_attrs(), only the case where 'sample_interval' is zero needs to be checked.

In the Linux kernel, the following vulnerability has been resolved: ceph: fix crash after fscrypt_encrypt_pagecache_blocks() error The function move_dirty_folio_in_page_array() was created by commit ce80b76dd327 ("ceph: introduce ceph_process_folio_batch() method") by moving code from ceph_writepages_start() to this function. This new function is supposed to return an error code which is checked by the caller (now ceph_process_folio_batch()), and on error, the caller invokes redirty_page_for_writepage() and then breaks from the loop. However, the refactoring commit has gone wrong, and it by accident, it always returns 0 (= success) because it first NULLs the pointer and then returns PTR_ERR(NULL) which is always 0. This means errors are silently ignored, leaving NULL entries in the page array, which may later crash the kernel. The simple solution is to call PTR_ERR() before clearing the pointer.

In the Linux kernel, the following vulnerability has been resolved: ASoC: simple-card-utils: Don't use __free(device_node) at graph_util_parse_dai() commit 419d1918105e ("ASoC: simple-card-utils: use __free(device_node) for device node") uses __free(device_node) for dlc->of_node, but we need to keep it while driver is in use. Don't use __free(device_node) in graph_util_parse_dai().

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Fix alignment fault in rtw_core_enable_beacon() rtw_core_enable_beacon() reads 4 bytes from an address that is not a multiple of 4. This results in a crash on some systems. Do 1 byte reads/writes instead. Unable to handle kernel paging request at virtual address ffff8000827e0522 Mem abort info: ESR = 0x0000000096000021 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault Data abort info: ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000005492000 [ffff8000827e0522] pgd=0000000000000000, p4d=10000001021d9403, pud=10000001021da403, pmd=100000011061c403, pte=00780000f3200f13 Internal error: Oops: 0000000096000021 [#1] SMP Modules linked in: [...] rtw88_8822ce rtw88_8822c rtw88_pci rtw88_core [...] CPU: 0 UID: 0 PID: 73 Comm: kworker/u32:2 Tainted: G W 6.17.9 #1-NixOS VOLUNTARY Tainted: [W]=WARN Hardware name: FriendlyElec NanoPC-T6 LTS (DT) Workqueue: phy0 rtw_c2h_work [rtw88_core] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : rtw_pci_read32+0x18/0x40 [rtw88_pci] lr : rtw_core_enable_beacon+0xe0/0x148 [rtw88_core] sp : ffff800080cc3ca0 x29: ffff800080cc3ca0 x28: ffff0001031fc240 x27: ffff000102100828 x26: ffffd2cb7c9b4088 x25: ffff0001031fc2c0 x24: ffff000112fdef00 x23: ffff000112fdef18 x22: ffff000111c29970 x21: 0000000000000001 x20: 0000000000000001 x19: ffff000111c22040 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffd2cb6507c090 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000007f10 x1 : 0000000000000522 x0 : ffff8000827e0522 Call trace: rtw_pci_read32+0x18/0x40 [rtw88_pci] (P) rtw_hw_scan_chan_switch+0x124/0x1a8 [rtw88_core] rtw_fw_c2h_cmd_handle+0x254/0x290 [rtw88_core] rtw_c2h_work+0x50/0x98 [rtw88_core] process_one_work+0x178/0x3f8 worker_thread+0x208/0x418 kthread+0x120/0x220 ret_from_fork+0x10/0x20 Code: d28fe202 8b020000 f9524400 8b214000 (b9400000) ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: Drop the MHI auto_queue feature for IPCR DL channels MHI stack offers the 'auto_queue' feature, which allows the MHI stack to auto queue the buffers for the RX path (DL channel). Though this feature simplifies the client driver design, it introduces race between the client drivers and the MHI stack. For instance, with auto_queue, the 'dl_callback' for the DL channel may get called before the client driver is fully probed. This means, by the time the dl_callback gets called, the client driver's structures might not be initialized, leading to NULL ptr dereference. Currently, the drivers have to workaround this issue by initializing the internal structures before calling mhi_prepare_for_transfer_autoqueue(). But even so, there is a chance that the client driver's internal code path may call the MHI queue APIs before mhi_prepare_for_transfer_autoqueue() is called, leading to similar NULL ptr dereference. This issue has been reported on the Qcom X1E80100 CRD machines affecting boot. So to properly fix all these races, drop the MHI 'auto_queue' feature altogether and let the client driver (QRTR) manage the RX buffers manually. In the QRTR driver, queue the RX buffers based on the ring length during probe and recycle the buffers in 'dl_callback' once they are consumed. This also warrants removing the setting of 'auto_queue' flag from controller drivers. Currently, this 'auto_queue' feature is only enabled for IPCR DL channel. So only the QRTR client driver requires the modification.

In the Linux kernel, the following vulnerability has been resolved: userfaultfd: fix a crash in UFFDIO_MOVE when PMD is a migration entry When UFFDIO_MOVE encounters a migration PMD entry, it proceeds with obtaining a folio and accessing it even though the entry is swp_entry_t. Add the missing check and let split_huge_pmd() handle migration entries. While at it also remove unnecessary folio check. [surenb@google.com: remove extra folio check, per David]

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, Fix memory leak in hws_action_get_shared_stc_nic error flow When an invalid stc_type is provided, the function allocates memory for shared_stc but jumps to unlock_and_out without freeing it, causing a memory leak. Fix by jumping to free_shared_stc label instead to ensure proper cleanup.

In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: fix stack overrun when loading vlenb The userspace load can put up to 2048 bits into an xlen bit stack buffer. We want only xlen bits, so check the size beforehand.

In the Linux kernel, the following vulnerability has been resolved: iommu/riscv: prevent NULL deref in iova_to_phys The riscv_iommu_pte_fetch() function returns either NULL for unmapped/never-mapped iova, or a valid leaf pte pointer that requires no further validation. riscv_iommu_iova_to_phys() failed to handle NULL returns. Prevent null pointer dereference in riscv_iommu_iova_to_phys(), and remove the pte validation.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla4xxx: Prevent a potential error pointer dereference The qla4xxx_get_ep_fwdb() function is supposed to return NULL on error, but qla4xxx_ep_connect() returns error pointers. Propagating the error pointers will lead to an Oops in the caller, so change the error pointers to NULL.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Check device memory pointer before usage Add a NULL check before accessing device memory to prevent a crash if dev->dm allocation in mlx5_init_once() fails.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix refcount leak causing resource not released When ksmbd_conn_releasing(opinfo->conn) returns true,the refcount was not decremented properly, causing a refcount leak that prevents the count from reaching zero and the memory from being released.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Check for hdwq null ptr when cleaning up lpfc_vport structure If a call to lpfc_sli4_read_rev() from lpfc_sli4_hba_setup() fails, the resultant cleanup routine lpfc_sli4_vport_delete_fcp_xri_aborted() may occur before sli4_hba.hdwqs are allocated. This may result in a null pointer dereference when attempting to take the abts_io_buf_list_lock for the first hardware queue. Fix by adding a null ptr check on phba->sli4_hba.hdwq and early return because this situation means there must have been an error during port initialization.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: remove refcounting in expectation dumpers Same pattern as previous patch: do not keep the expectation object alive via refcount, only store a cookie value and then use that as the skip hint for dump resumption. AFAICS this has the same issue as the one resolved in the conntrack dumper, when we do if (!refcount_inc_not_zero(&exp->use)) to increment the refcount, there is a chance that exp == last, which causes a double-increment of the refcount and subsequent memory leak.

In the Linux kernel, the following vulnerability has been resolved: cgroup: split cgroup_destroy_wq into 3 workqueues A hung task can occur during [1] LTP cgroup testing when repeatedly mounting/unmounting perf_event and net_prio controllers with systemd.unified_cgroup_hierarchy=1. The hang manifests in cgroup_lock_and_drain_offline() during root destruction. Related case: cgroup_fj_function_perf_event cgroup_fj_function.sh perf_event cgroup_fj_function_net_prio cgroup_fj_function.sh net_prio Call Trace: cgroup_lock_and_drain_offline+0x14c/0x1e8 cgroup_destroy_root+0x3c/0x2c0 css_free_rwork_fn+0x248/0x338 process_one_work+0x16c/0x3b8 worker_thread+0x22c/0x3b0 kthread+0xec/0x100 ret_from_fork+0x10/0x20 Root Cause: CPU0 CPU1 mount perf_event umount net_prio cgroup1_get_tree cgroup_kill_sb rebind_subsystems // root destruction enqueues // cgroup_destroy_wq // kill all perf_event css // one perf_event css A is dying // css A offline enqueues cgroup_destroy_wq // root destruction will be executed first css_free_rwork_fn cgroup_destroy_root cgroup_lock_and_drain_offline // some perf descendants are dying // cgroup_destroy_wq max_active = 1 // waiting for css A to die Problem scenario: 1. CPU0 mounts perf_event (rebind_subsystems) 2. CPU1 unmounts net_prio (cgroup_kill_sb), queuing root destruction work 3. A dying perf_event CSS gets queued for offline after root destruction 4. Root destruction waits for offline completion, but offline work is blocked behind root destruction in cgroup_destroy_wq (max_active=1) Solution: Split cgroup_destroy_wq into three dedicated workqueues: cgroup_offline_wq – Handles CSS offline operations cgroup_release_wq – Manages resource release cgroup_free_wq – Performs final memory deallocation This separation eliminates blocking in the CSS free path while waiting for offline operations to complete. [1] https://github.com/linux-test-project/ltp/blob/master/runtest/controllers

In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: fix ida_free call while not allocated In the snd_utimer_create() function, if the kasprintf() function return NULL, snd_utimer_put_id() will be called, finally use ida_free() to free the unallocated id 0. the syzkaller reported the following information: ------------[ cut here ]------------ ida_free called for id=0 which is not allocated. WARNING: CPU: 1 PID: 1286 at lib/idr.c:592 ida_free+0x1fd/0x2f0 lib/idr.c:592 Modules linked in: CPU: 1 UID: 0 PID: 1286 Comm: syz-executor164 Not tainted 6.15.8 #3 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014 RIP: 0010:ida_free+0x1fd/0x2f0 lib/idr.c:592 Code: f8 fc 41 83 fc 3e 76 69 e8 70 b2 f8 (...) RSP: 0018:ffffc900007f79c8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 1ffff920000fef3b RCX: ffffffff872176a5 RDX: ffff88800369d200 RSI: 0000000000000000 RDI: ffff88800369d200 RBP: 0000000000000000 R08: ffffffff87ba60a5 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000002 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f6f1abc1740(0000) GS:ffff8880d76a0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6f1ad7a784 CR3: 000000007a6e2000 CR4: 00000000000006f0 Call Trace: <TASK> snd_utimer_put_id sound/core/timer.c:2043 [inline] [snd_timer] snd_utimer_create+0x59b/0x6a0 sound/core/timer.c:2184 [snd_timer] snd_utimer_ioctl_create sound/core/timer.c:2202 [inline] [snd_timer] __snd_timer_user_ioctl.isra.0+0x724/0x1340 sound/core/timer.c:2287 [snd_timer] snd_timer_user_ioctl+0x75/0xc0 sound/core/timer.c:2298 [snd_timer] vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x198/0x200 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x7b/0x160 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] The utimer->id should be set properly before the kasprintf() function, ensures the snd_utimer_put_id() function will free the allocated id.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Add missing lock in cfg80211_check_and_end_cac() Callers of wdev_chandef() must hold the wiphy mutex. But the worker cfg80211_propagate_cac_done_wk() never takes the lock. Which triggers the warning below with the mesh_peer_connected_dfs test from hostapd and not (yet) released mac80211 code changes: WARNING: CPU: 0 PID: 495 at net/wireless/chan.c:1552 wdev_chandef+0x60/0x165 Modules linked in: CPU: 0 UID: 0 PID: 495 Comm: kworker/u4:2 Not tainted 6.14.0-rc5-wt-g03960e6f9d47 #33 13c287eeabfe1efea01c0bcc863723ab082e17cf Workqueue: cfg80211 cfg80211_propagate_cac_done_wk Stack: 00000000 00000001 ffffff00 6093267c 00000000 6002ec30 6d577c50 60037608 00000000 67e8d108 6063717b 00000000 Call Trace: [<6002ec30>] ? _printk+0x0/0x98 [<6003c2b3>] show_stack+0x10e/0x11a [<6002ec30>] ? _printk+0x0/0x98 [<60037608>] dump_stack_lvl+0x71/0xb8 [<6063717b>] ? wdev_chandef+0x60/0x165 [<6003766d>] dump_stack+0x1e/0x20 [<6005d1b7>] __warn+0x101/0x20f [<6005d3a8>] warn_slowpath_fmt+0xe3/0x15d [<600b0c5c>] ? mark_lock.part.0+0x0/0x4ec [<60751191>] ? __this_cpu_preempt_check+0x0/0x16 [<600b11a2>] ? mark_held_locks+0x5a/0x6e [<6005d2c5>] ? warn_slowpath_fmt+0x0/0x15d [<60052e53>] ? unblock_signals+0x3a/0xe7 [<60052f2d>] ? um_set_signals+0x2d/0x43 [<60751191>] ? __this_cpu_preempt_check+0x0/0x16 [<607508b2>] ? lock_is_held_type+0x207/0x21f [<6063717b>] wdev_chandef+0x60/0x165 [<605f89b4>] regulatory_propagate_dfs_state+0x247/0x43f [<60052f00>] ? um_set_signals+0x0/0x43 [<605e6bfd>] cfg80211_propagate_cac_done_wk+0x3a/0x4a [<6007e460>] process_scheduled_works+0x3bc/0x60e [<6007d0ec>] ? move_linked_works+0x4d/0x81 [<6007d120>] ? assign_work+0x0/0xaa [<6007f81f>] worker_thread+0x220/0x2dc [<600786ef>] ? set_pf_worker+0x0/0x57 [<60087c96>] ? to_kthread+0x0/0x43 [<6008ab3c>] kthread+0x2d3/0x2e2 [<6007f5ff>] ? worker_thread+0x0/0x2dc [<6006c05b>] ? calculate_sigpending+0x0/0x56 [<6003b37d>] new_thread_handler+0x4a/0x64 irq event stamp: 614611 hardirqs last enabled at (614621): [<00000000600bc96b>] __up_console_sem+0x82/0xaf hardirqs last disabled at (614630): [<00000000600bc92c>] __up_console_sem+0x43/0xaf softirqs last enabled at (614268): [<00000000606c55c6>] __ieee80211_wake_queue+0x933/0x985 softirqs last disabled at (614266): [<00000000606c52d6>] __ieee80211_wake_queue+0x643/0x985

In the Linux kernel, the following vulnerability has been resolved: can: j1939: implement NETDEV_UNREGISTER notification handler syzbot is reporting unregister_netdevice: waiting for vcan0 to become free. Usage count = 2 problem, for j1939 protocol did not have NETDEV_UNREGISTER notification handler for undoing changes made by j1939_sk_bind(). Commit 25fe97cb7620 ("can: j1939: move j1939_priv_put() into sk_destruct callback") expects that a call to j1939_priv_put() can be unconditionally delayed until j1939_sk_sock_destruct() is called. But we need to call j1939_priv_put() against an extra ref held by j1939_sk_bind() call (as a part of undoing changes made by j1939_sk_bind()) as soon as NETDEV_UNREGISTER notification fires (i.e. before j1939_sk_sock_destruct() is called via j1939_sk_release()). Otherwise, the extra ref on "struct j1939_priv" held by j1939_sk_bind() call prevents "struct net_device" from dropping the usage count to 1; making it impossible for unregister_netdevice() to continue. [mkl: remove space in front of label]

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: mdt_loader: Ensure we don't read past the ELF header When the MDT loader is used in remoteproc, the ELF header is sanitized beforehand, but that's not necessary the case for other clients. Validate the size of the firmware buffer to ensure that we don't read past the end as we iterate over the header. e_phentsize and e_shentsize are validated as well, to ensure that the assumptions about step size in the traversal are valid.

In the Linux kernel, the following vulnerability has been resolved: spi: cadence-quadspi: Implement refcount to handle unbind during busy driver support indirect read and indirect write operation with assumption no force device removal(unbind) operation. However force device removal(removal) is still available to root superuser. Unbinding driver during operation causes kernel crash. This changes ensure driver able to handle such operation for indirect read and indirect write by implementing refcount to track attached devices to the controller and gracefully wait and until attached devices remove operation completed before proceed with removal operation.

In the Linux kernel, the following vulnerability has been resolved: media: iris: Fix NULL pointer dereference A warning reported by smatch indicated a possible null pointer dereference where one of the arguments to API "iris_hfi_gen2_handle_system_error" could sometimes be null. To fix this, add a check to validate that the argument passed is not null before accessing its members.

In the Linux kernel, the following vulnerability has been resolved: PCI: Fix link speed calculation on retrain failure When pcie_failed_link_retrain() fails to retrain, it tries to revert to the previous link speed. However it calculates that speed from the Link Control 2 register without masking out non-speed bits first. PCIE_LNKCTL2_TLS2SPEED() converts such incorrect values to PCI_SPEED_UNKNOWN (0xff), which in turn causes a WARN splat in pcie_set_target_speed(): pci 0000:00:01.1: [1022:14ed] type 01 class 0x060400 PCIe Root Port pci 0000:00:01.1: broken device, retraining non-functional downstream link at 2.5GT/s pci 0000:00:01.1: retraining failed WARNING: CPU: 1 PID: 1 at drivers/pci/pcie/bwctrl.c:168 pcie_set_target_speed RDX: 0000000000000001 RSI: 00000000000000ff RDI: ffff9acd82efa000 pcie_failed_link_retrain pci_device_add pci_scan_single_device Mask out the non-speed bits in PCIE_LNKCTL2_TLS2SPEED() and PCIE_LNKCAP_SLS2SPEED() so they don't incorrectly return PCI_SPEED_UNKNOWN. [bhelgaas: commit log, add details from https://lore.kernel.org/r/1c92ef6bcb314ee6977839b46b393282e4f52e74.1750684771.git.lukas@wunner.de]

In the Linux kernel, the following vulnerability has been resolved: ppp: fix memory leak in pad_compress_skb If alloc_skb() fails in pad_compress_skb(), it returns NULL without releasing the old skb. The caller does: skb = pad_compress_skb(ppp, skb); if (!skb) goto drop; drop: kfree_skb(skb); When pad_compress_skb() returns NULL, the reference to the old skb is lost and kfree_skb(skb) ends up doing nothing, leading to a memory leak. Align pad_compress_skb() semantics with realloc(): only free the old skb if allocation and compression succeed. At the call site, use the new_skb variable so the original skb is not lost when pad_compress_skb() fails.

In the Linux kernel, the following vulnerability has been resolved: ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered If a synchronous error is detected as a result of user-space process triggering a 2-bit uncorrected error, the CPU will take a synchronous error exception such as Synchronous External Abort (SEA) on Arm64. The kernel will queue a memory_failure() work which poisons the related page, unmaps the page, and then sends a SIGBUS to the process, so that a system wide panic can be avoided. However, no memory_failure() work will be queued when abnormal synchronous errors occur. These errors can include situations like invalid PA, unexpected severity, no memory failure config support, invalid GUID section, etc. In such a case, the user-space process will trigger SEA again. This loop can potentially exceed the platform firmware threshold or even trigger a kernel hard lockup, leading to a system reboot. Fix it by performing a force kill if no memory_failure() work is queued for synchronous errors. [ rjw: Changelog edits ]

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid a NULL pointer dereference [WHY] Although unlikely drm_atomic_get_new_connector_state() or drm_atomic_get_old_connector_state() can return NULL. [HOW] Check returns before dereference. (cherry picked from commit 1e5e8d672fec9f2ab352be121be971877bff2af9)

In the Linux kernel, the following vulnerability has been resolved: ARM: tegra: Use I/O memcpy to write to IRAM Kasan crashes the kernel trying to check boundaries when using the normal memcpy.