In Wireshark 2.6.0 to 2.6.4 and 2.4.0 to 2.4.10, the MMSE dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-mmse.c by preventing length overflows.

In Wireshark 2.6.0 to 2.6.1, 2.4.0 to 2.4.7, and 2.2.0 to 2.2.15, the DICOM dissector could go into a large or infinite loop. This was addressed in epan/dissectors/packet-dcm.c by preventing an offset overflow.

In Wireshark 2.6.0 to 2.6.1, 2.4.0 to 2.4.7, and 2.2.0 to 2.2.15, the Bazaar protocol dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-bzr.c by properly handling items that are too long.

In Wireshark 2.6.0 to 2.6.1, 2.4.0 to 2.4.7, and 2.2.0 to 2.2.15, the MMSE dissector could go into an infinite loop. This was addressed in epan/proto.c by adding offset and length validation.

Infinite loops in the BPv6, OpenFlow, and Kafka protocol dissectors in Wireshark 4.0.0 to 4.0.1 and 3.6.0 to 3.6.9 allows denial of service via packet injection or crafted capture file

Infinite loop in the F5 Ethernet Trailer protocol dissector in Wireshark 3.6.0 to 3.6.7 and 3.4.0 to 3.4.15 allows denial of service via packet injection or crafted capture file

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-ber.c had an infinite loop that was addressed by validating a length.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-usb.c had an infinite loop that was addressed by rejecting short frame header lengths.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-reload.c had an infinite loop that was addressed by validating a length.

In Wireshark 2.2.0 to 2.2.6 and 2.0.0 to 2.0.12, the SoulSeek dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-slsk.c by making loop bounds more explicit.

In Wireshark 2.2.0 to 2.2.5 and 2.0.0 to 2.0.11, the RPC over RDMA dissector could go into an infinite loop, triggered by packet injection or a malformed capture file. This was addressed in epan/dissectors/packet-rpcrdma.c by correctly checking for going beyond the maximum offset.

In Wireshark 2.2.0 to 2.2.5 and 2.0.0 to 2.0.11, the BGP dissector could go into an infinite loop, triggered by packet injection or a malformed capture file. This was addressed in epan/dissectors/packet-bgp.c by using a different integer data type.

In Wireshark 2.2.0 to 2.2.5 and 2.0.0 to 2.0.11, the SLSK dissector could go into an infinite loop, triggered by packet injection or a malformed capture file. This was addressed in epan/dissectors/packet-slsk.c by adding checks for the remaining length.

In Wireshark 2.2.0 to 2.2.4 and 2.0.0 to 2.0.10, there is a NetScaler file parser infinite loop, triggered by a malformed capture file. This was addressed in wiretap/netscaler.c by validating record sizes.

In Wireshark 2.2.0 to 2.2.4 and 2.0.0 to 2.0.10, there is a Netscaler file parser infinite loop, triggered by a malformed capture file. This was addressed in wiretap/netscaler.c by changing the restrictions on file size.

In Wireshark 2.2.0 to 2.2.4 and 2.0.0 to 2.0.10, there is an RTMPT dissector infinite loop, triggered by packet injection or a malformed capture file. This was addressed in epan/dissectors/packet-rtmpt.c by properly incrementing a certain sequence value.

In Wireshark 2.2.4 and earlier, a crafted or malformed STANAG 4607 capture file will cause an infinite loop and memory exhaustion. If the packet size field in a packet header is null, the offset to read from will not advance, causing continuous attempts to read the same zero length packet. This will quickly exhaust all system memory.

XML External Entity vulnerability in libexpat 2.2.0 and earlier (Expat XML Parser Library) allows attackers to put the parser in an infinite loop using a malformed external entity definition from an external DTD.

crypto/ahash.c in the Linux kernel through 4.10.9 allows attackers to cause a denial of service (API operation calling its own callback, and infinite recursion) by triggering EBUSY on a full queue.

Unisys ClearPath MCP TCP/IP Networking Services 59.1, 60.0, and 62.0 has an Infinite Loop.

Memory Exhaustion vulnerability in ONLYOFFICE Document Server 4.0.3 through 7.3.2 allows remote attackers to cause a denial of service via crafted JavaScript file.

Openwsman, versions up to and including 2.6.9, are vulnerable to infinite loop in process_connection() when parsing specially crafted HTTP requests. A remote, unauthenticated attacker can exploit this vulnerability by sending malicious HTTP request to cause denial of service to openwsman server.

A denial-of-service vulnerability exists in the processing of multi-part/form-data requests in the base GoAhead web server application in versions v5.0.1, v.4.1.1 and v3.6.5. A specially crafted HTTP request can lead to an infinite loop in the process. The request can be unauthenticated in the form of GET or POST requests and does not require the requested resource to exist on the server.

An issue was discovered in MediaWiki through 1.36.2. A parser function related to loop control allowed for an infinite loop (and php-fpm hang) within the Loops extension because egLoopsCountLimit is mishandled. This could lead to memory exhaustion.

sigstore-go, a Go library for Sigstore signing and verification, is susceptible to a denial of service attack in versions prior to 0.6.1 when a verifier is provided a maliciously crafted Sigstore Bundle containing large amounts of verifiable data, in the form of signed transparency log entries, RFC 3161 timestamps, and attestation subjects. The verification of these data structures is computationally expensive. This can be used to consume excessive CPU resources, leading to a denial of service attack. TUF's security model labels this type of vulnerability an "Endless data attack," and can lead to verification failing to complete and disrupting services that rely on sigstore-go for verification. This vulnerability is addressed with sigstore-go 0.6.1, which adds hard limits to the number of verifiable data structures that can be processed in a bundle. Verification will fail if a bundle has data that exceeds these limits. The limits are 32 signed transparency log entries, 32 RFC 3161 timestamps, 1024 attestation subjects, and 32 digests per attestation subject. These limits are intended to be high enough to accommodate the vast majority of use cases, while preventing the verification of maliciously crafted bundles that contain large amounts of verifiable data. Users who are vulnerable but unable to quickly upgrade may consider adding manual bundle validation to enforce limits similar to those in the referenced patch prior to calling sigstore-go's verification functions.

Webmin before 2.202 and Virtualmin before 7.20.2 allow a network traffic loop via spoofed UDP packets on port 10000.

NLnet Labs Routinator prior to 0.10.2 happily processes a chain of RRDP repositories of infinite length causing it to never finish a validation run. In RPKI, a CA can choose the RRDP repository it wishes to publish its data in. By continuously generating a new child CA that only consists of another CA using a different RRDP repository, a malicious CA can create a chain of CAs of de-facto infinite length. Routinator prior to version 0.10.2 did not contain a limit on the length of such a chain and will therefore continue to process this chain forever. As a result, the validation run will never finish, leading to Routinator continuing to serve the old data set or, if in the initial validation run directly after starting, never serve any data at all.

A Denial of Service (infinite loop) exists in OpenSIPS before 1.10 in lookup.c.

USG9500 with versions of V500R001C30;V500R001C60 have a denial of service vulnerability. Due to a flaw in the X.509 implementation in the affected products which can result in an infinite loop, an attacker may exploit the vulnerability via a malicious certificate to perform a denial of service attack on the affected products.

Apache Tomcat 8.5.0 to 8.5.63, 9.0.0-M1 to 9.0.43 and 10.0.0-M1 to 10.0.2 did not properly validate incoming TLS packets. When Tomcat was configured to use NIO+OpenSSL or NIO2+OpenSSL for TLS, a specially crafted packet could be used to trigger an infinite loop resulting in a denial of service.

An exploitable denial-of-service vulnerability exists in the Dicom-packet parsing functionality of LEADTOOLS libltdic.so version 20.0.2019.3.15. A specially crafted packet can cause an infinite loop, resulting in a denial of service. An attacker can send a packet to trigger this vulnerability.

The payload length in a WebSocket frame was not correctly validated in Apache Tomcat 10.0.0-M1 to 10.0.0-M6, 9.0.0.M1 to 9.0.36, 8.5.0 to 8.5.56 and 7.0.27 to 7.0.104. Invalid payload lengths could trigger an infinite loop. Multiple requests with invalid payload lengths could lead to a denial of service.

The RemoteAddr and LocalAddr methods on the returned net.Conn may call themselves, leading to an infinite loop which will crash the program due to a stack overflow.

An improperly performed length calculation on a buffer in PlaintextRecordLayer could lead to an infinite loop and denial-of-service based on user input. This issue affected versions of fizz prior to v2019.03.04.00.

Windows Standards-Based Storage Management Service Denial of Service Vulnerability

In Contiki 3.0, a Telnet server that silently quits (before disconnection with clients) leads to connected clients entering an infinite loop and waiting forever, which may cause excessive CPU consumption.

An infinite loop in Open Robotics ros_comm XMLRPC server in ROS Melodic through 1.4.11 and ROS Noetic through1.15.11 allows remote attackers to cause a Denial of Service in ros_comm via a crafted XMLRPC call.

jsoup is a Java library for working with HTML. Those using jsoup versions prior to 1.14.2 to parse untrusted HTML or XML may be vulnerable to DOS attacks. If the parser is run on user supplied input, an attacker may supply content that causes the parser to get stuck (loop indefinitely until cancelled), to complete more slowly than usual, or to throw an unexpected exception. This effect may support a denial of service attack. The issue is patched in version 1.14.2. There are a few available workarounds. Users may rate limit input parsing, limit the size of inputs based on system resources, and/or implement thread watchdogs to cap and timeout parse runtimes.

A flaw was found in python. An improperly handled HTTP response in the HTTP client code of python may allow a remote attacker, who controls the HTTP server, to make the client script enter an infinite loop, consuming CPU time. The highest threat from this vulnerability is to system availability.

In parseUriInternal of Intent.java, there is a possible infinite loop due to improper input validation. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.

An issue was discovered in the CentralAuth extension in MediaWiki through 1.36. The Special:GlobalRenameRequest page is vulnerable to infinite loops and denial of service attacks when a user's current username is beyond an arbitrary maximum configuration value (MaxNameChars).

EDK2's Network Package is susceptible to an infinite lop vulnerability when parsing a PadN option in the Destination Options header of IPv6. This vulnerability can be exploited by an attacker to gain unauthorized access and potentially lead to a loss of Availability.

An issue was discovered in ApiPageSet.php in MediaWiki before 1.35.12, 1.36.x through 1.39.x before 1.39.5, and 1.40.x before 1.40.1. It allows attackers to cause a denial of service (unbounded loop and RequestTimeoutException) when querying pages redirected to other variants with redirects and converttitles set.

golang.org/x/net before v0.0.0-20210520170846-37e1c6afe023 allows attackers to cause a denial of service (infinite loop) via crafted ParseFragment input.

An issue was discovered in tcp_pulloutofband() in tcp_in.c in HCC embedded InterNiche 4.0.1. The TCP out-of-band urgent-data processing function invokes a panic function if the pointer to the end of the out-of-band data points outside of the TCP segment's data. If the panic function hadn't a trap invocation removed, it will enter an infinite loop and therefore cause DoS (continuous loop or a device reset).

An issue in OneFlow-Inc. Oneflow v0.9.1 allows attackers to cause a Denial of Service (DoS) when an empty array is processed with oneflow.tensordot.

OFPMultipartReply in parser.py in Faucet SDN Ryu 4.34 allows attackers to cause a denial of service (infinite loop) via b.length=0.

OFPFlowStats in parser.py in Faucet SDN Ryu 4.34 allows attackers to cause a denial of service (infinite loop) via inst.length=0.

OFPHello in parser.py in Faucet SDN Ryu 4.34 allows attackers to cause a denial of service (infinite loop) via length=0.

Envoy is a cloud-native, open source edge and service proxy. Envoyproxy with a Brotli filter can get into an endless loop during decompression of Brotli data with extra input.