A critical vulnerability has been discovered in Privileged Remote Access (PRA) and Remote Support (RS) products which can allow an unauthenticated attacker to inject commands that are run as a site user.

A vulnerability, which was classified as critical, has been found in DrayTek Vigor2960 and Vigor300B 1.5.1.3/1.5.1.4. This issue affects some unknown processing of the file /cgi-bin/mainfunction.cgi/apmcfgupptim of the component Web Management Interface. The manipulation of the argument session leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

EnerSys AMPA versions 24.04 through 24.16, inclusive, are vulnerable to command injection leading to privileged remote shell access.

Totolink devices A3100R v4.1.2cu.5050_B20200504, A830R v5.9c.4729_B20191112, and A720R v4.1.5cu.470_B20200911 were discovered to contain command injection vulnerability in the function setNoticeCfg. This vulnerability allows attackers to execute arbitrary commands via the IpFrom parameter.

A vulnerability was found in TOTOLINK CA300-PoE 6.2c.884. It has been rated as critical. Affected by this issue is the function setUpgradeUboot of the file upgrade.so. The manipulation of the argument FileName leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

vRealize Network Insight (vRNI) contains a command injection vulnerability present in the vRNI REST API. A malicious actor with network access to the vRNI REST API can execute commands without authentication.

The isMail transport in PHPMailer before 5.2.20 might allow remote attackers to pass extra parameters to the mail command and consequently execute arbitrary code by leveraging improper interaction between the escapeshellarg function and internal escaping performed in the mail function in PHP. NOTE: this vulnerability exists because of an incorrect fix for CVE-2016-10033.

A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the checkNet function in /cgi-bin/luci/api/auth.

An issue was discovered on the D-Link DWR-932B router. qmiweb allows command injection with ` characters.

An issue was discovered in D-Link DIR-816 DIR-816A2_FWv1.10CNB05_R1B011D88210 The HTTP request parameter is used in the handler function of /goform/form2userconfig.cgi route, which can construct the user name string to delete the user function. This can lead to command injection through shell metacharacters.

A Remote Command Injection vulnerability exists in DrayTek Vigor 2960 1.5.1.3, DrayTek Vigor 3900 1.5.1.3, and DrayTek Vigor 300B 1.5.1.3 via a crafted HTTP message containing malformed QUERY STRING in mainfunction.cgi, which could let a remote malicious user execute arbitrary code.

iTextPDF in iText 7 and up to (excluding 4.4.13.3) 7.1.17 allows command injection via a CompareTool filename that is mishandled on the gs (aka Ghostscript) command line in GhostscriptHelper.java.

EnerSys AMPA 22.09 and prior versions are vulnerable to command injection leading to privileged remote shell access.

Roxy-WI is a Web interface for managing HAProxy, Nginx and Keepalived servers. Prior to version 6.1.1.0, the system command can be run remotely via the subprocess_execute function without processing the inputs received from the user in the /app/options.py file. Version 6.1.1.0 contains a patch for this issue.

On Draytek Vigor3900, Vigor2960, and Vigor 300B devices before 1.5.1.1, there are some command-injection vulnerabilities in the mainfunction.cgi file.

In the wazuh-slack active response script in Wazuh 4.2.x before 4.2.5, untrusted user agents are passed to a curl command line, potentially resulting in remote code execution.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been classified as critical. Affected is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Embedded web server command injection vulnerability in Lexmark devices through 2021-12-07.

A vulnerability has been found in Tenda AC6 15.03.05.19 and classified as critical. Affected by this vulnerability is the function formWriteFacMac of the file /goform/WriteFacMac of the component API Endpoint. The manipulation of the argument mac leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Improper neutralization of special elements used in a command ('Command Injection') vulnerability in Task Manager component in Synology BeePhotos before 1.0.2-10026 and 1.1.0-10053 and Synology Photos before 1.6.2-0720 and 1.7.0-0795 allows remote attackers to execute arbitrary code via unspecified vectors.

All versions of yongyou PLM are affected by a command injection issue. UFIDA PLM (Product Life Cycle Management) is a strategic management method. It applies a series of enterprise application systems to support the entire process from conceptual design to the end of product life, and the collaborative creation, distribution, application and management of product information across organizations. Yonyou PLM uses jboss by default, and you can access the management control background without authorization An attacker can use this vulnerability to gain server permissions.

Retrieval-based-Voice-Conversion-WebUI is a voice changing framework based on VITS. Versions 2.2.231006 and prior are vulnerable to command injection. The variables exp_dir1, among others, take user input and pass it to the click_train function, which concatenates them into a command that is run on the server. This can lead to arbitrary command execution. As of time of publication, no known patches exist.

Wavlink WL-WN530H4 20220801 was found to contain a command injection vulnerability in the ping_test function of the adm.cgi via the pingIp parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

A vulnerability classified as critical was found in Totolink X2000R 1.0.0-B20221212.1452. Affected by this vulnerability is the function formMapDelDevice of the file /boafrm/formMapDelDevice. The manipulation of the argument macstr leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Eclipse Target Management: Terminal and Remote System Explorer (RSE) version <= 4.5.400 has a remote code execution vulnerability that does not require authentication. The fixed version is included in Eclipse IDE 2024-03

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.14, EX6100v2 before 1.0.1.98, EX6150v2 before 1.0.1.98, EX6250 before 1.0.0.132, EX6400 before 1.0.2.158, EX6400v2 before 1.0.0.132, EX6410 before 1.0.0.132, EX6420 before 1.0.0.132, EX7300 before 1.0.2.158, EX7300v2 before 1.0.0.132, EX7320 before 1.0.0.132, EX7700 before 1.0.0.216, EX8000 before 1.0.1.232, R7800 before 1.0.2.78, RBK12 before 2.6.1.44, RBR10 before 2.6.1.44, RBS10 before 2.6.1.44, RBK20 before 2.6.1.38, RBR20 before 2.6.1.36, RBS20 before 2.6.1.38, RBK40 before 2.6.1.38, RBR40 before 2.6.1.36, RBS40 before 2.6.1.38, RBK50 before 2.6.1.40, RBR50 before 2.6.1.40, RBS50 before 2.6.1.40, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RBS40V before 2.6.2.4, RBS50Y before 2.6.1.40, RBW30 before 2.6.2.2, and XR500 before 2.3.2.114.

Advantech iView, versions 5.6 and prior, has an improper neutralization of special elements used in a command (“command injection”) vulnerability. Successful exploitation of this vulnerability may allow an attacker to send a HTTP GET or POST request that creates a command string without any validation. The attacker may then remotely execute code.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D8500 before 1.0.3.58, R6900P before 1.3.2.132, R7000P before 1.3.2.132, R7100LG before 1.0.0.64, WNDR3400v3 before 1.0.1.38, and XR300 before 1.0.3.56.

An issue was discovered in D-Link DIR816_A1_FW101CNB04 750m11ac wireless router, The HTTP request parameter is used in the handler function of /goform/form2userconfig.cgi route, which can construct the user name string to delete the user function. This can lead to command injection through shell metacharacters.

A command-injection vulnerability in the Image Upload function of the NASCENT RemKon Device Manager 4.0.0.0 allows attackers to execute arbitrary commands, as root, via shell metacharacters in the filename parameter to assets/index.php.

A vulnerability was found in kalcaddle kodbox up to 1.48. It has been declared as critical. Affected by this vulnerability is the function check of the file plugins/officeViewer/controller/libreOffice/index.class.php. The manipulation of the argument soffice leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.48.04 is able to address this issue. The identifier of the patch is 63a4d5708d210f119c24afd941d01a943e25334c. It is recommended to upgrade the affected component. The identifier VDB-248209 was assigned to this vulnerability.

An issue was discovered in the lettre crate before 0.9.6 for Rust. In an e-mail message body, an attacker can place a . character after two <CR><LF> sequences and then inject arbitrary SMTP commands.

SystemK NVR 504/508/516 versions 2.3.5SK.30084998 and prior are vulnerable to a command injection vulnerability in the dynamic domain name system (DDNS) settings that could allow an attacker to execute arbitrary commands with root privileges.

Possible Command injection Vulnerability in iManager has been discovered in OpenText™ iManager 3.2.4.0000.

The LearnPress plugin for WordPress is vulnerable to Command Injection in all versions up to, and including, 4.2.5.7 via the get_content function. This is due to the plugin making use of the call_user_func function with user input. This makes it possible for unauthenticated attackers to execute any public function with one parameter, which could result in remote code execution.

Shopware is an open source eCommerce platform. Versions prior to 6.4.3.1 contain a command injection vulnerability in mail agent settings. Version 6.4.3.1 contains a patch. As workarounds for older versions of 6.1, 6.2, and 6.3, corresponding security measures are also available via a plugin.

Btrbk before 0.31.2 allows command execution because of the mishandling of remote hosts filtering SSH commands using ssh_filter_btrbk.sh in authorized_keys.

Tenda i29 v1.0 V1.0.0.5 was discovered to contain a command injection vulnerability via the sysScheduleRebootSet function.

An issue was discovered in Digi TransPort DR64, SR44 VC74, and WR. The ZING protocol allows arbitrary remote command execution with SUPER privileges. This allows an attacker (with knowledge of the protocol) to execute arbitrary code on the controller including overwriting firmware, adding/removing users, disabling the internal firewall, etc.

The D-Link DIR-645 Wired/Wireless Router Rev. Ax with firmware 1.04b12 and earlier allows remote attackers to execute arbitrary commands via a GetDeviceSettings action to the HNAP interface.

An issue discovered in TOTOLINK X6000R v9.4.0cu.852_B20230719 allows attackers to run arbitrary commands via the sub_415AA4 function.

Tenda AX1803 v1.0.0.1 was discovered to contain a command injection vulnerability via the function fromAdvSetLanIp.

An issue discovered in TOTOLINK X6000R v9.4.0cu.852_B20230719 allows attackers to run arbitrary commands via the sub_41284C function.

An issue discovered in TOTOLINK X6000R v9.4.0cu.852_B20230719 allows attackers to run arbitrary commands via the sub_415C80 function.

A command execution vulnerability exists in the tddpd enable_test_mode functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926 and Tp-Link N300 Wireless Access Point (EAP115 V4) v5.0.4 Build 20220216. A specially crafted series of network requests can lead to arbitrary command execution. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.This vulnerability impacts `uclited` on the EAP115(V4) 5.0.4 Build 20220216 of the N300 Wireless Gigabit Access Point.

xml_security.rb in the ruby-saml gem before 1.0.0 for Ruby allows XPath injection and code execution because prepared statements are not used.

TOTOLINK X5000R_V9.1.0cu.2089_B20211224 and X5000R_V9.1.0cu.2350_B20230313 were discovered to contain a remote code execution (RCE) vulnerability via the lang parameter in the setLanguageCfg function.

Accellion File Transfer Appliance before FTA_9_11_210 allows remote attackers to execute arbitrary code via shell metacharacters in the oauth_token parameter.

In vowifi service, there is a possible command injection due to improper input validation. This could lead to remote escalation of privilege with no additional execution privileges needed.