Electrolink transmitters are vulnerable to an authentication bypass vulnerability affecting the login cookie. An attacker can set an arbitrary value except 'NO' to the login cookie and have full system access.

The application is vulnerable to an unauthenticated parameter manipulation that allows an attacker to set the credentials to blank giving her access to the admin panel. Also vulnerable to account takeover and arbitrary password change.

An unauthenticated attacker can reset the board and stop transmitter operations by sending a specially-crafted GET request to the command.cgi gateway, resulting in a denial-of-service scenario.

The web interface on the RIGOL MSO5000 digital oscilloscope with firmware 00.01.03.00.03 allows remote attackers to change the admin password via a zero-length pass0 to the webcontrol changepwd.cgi application, i.e., the entered password only needs to match the first zero characters of the saved password.

An external config control vulnerability exists in the OAS Engine SecureAddSecurity functionality of Open Automation Software OAS Platform V16.00.0112. A specially-crafted series of network requests can lead to the creation of a custom Security Group. An attacker can send a sequence of requests to trigger this vulnerability.

ESPHome is a system to control the ESP8266/ESP32. Anyone with web_server enabled and HTTP basic auth configured on version 2021.9.1 or older is vulnerable to an issue in which `web_server` allows over-the-air (OTA) updates without checking user defined basic auth username & password. This issue is patched in version 2021.9.2. As a workaround, one may disable or remove `web_server`.

Mautic allows you to update the application via an upgrade script. The upgrade logic isn't shielded off correctly, which may lead to vulnerable situation. This vulnerability is mitigated by the fact that Mautic needs to be installed in a certain way to be vulnerable.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.7, FreeSWITCH does not authenticate SIP MESSAGE requests, leading to spam and message spoofing. By default, SIP requests of the type MESSAGE (RFC 3428) are not authenticated in the affected versions of FreeSWITCH. MESSAGE requests are relayed to SIP user agents registered with the FreeSWITCH server without requiring any authentication. Although this behaviour can be changed by setting the `auth-messages` parameter to `true`, it is not the default setting. Abuse of this security issue allows attackers to send SIP MESSAGE messages to any SIP user agent that is registered with the server without requiring authentication. Additionally, since no authentication is required, chat messages can be spoofed to appear to come from trusted entities. Therefore, abuse can lead to spam and enable social engineering, phishing and similar attacks. This issue is patched in version 1.10.7. Maintainers recommend that this SIP message type is authenticated by default so that FreeSWITCH administrators do not need to be explicitly set the `auth-messages` parameter. When following such a recommendation, a new parameter can be introduced to explicitly disable authentication.

Talend Data Catalog remote harvesting server before 8.0-20230413 contains a /upgrade endpoint that allows an unauthenticated WAR file to be deployed on the server. (A mitigation is that the remote harvesting server should be behind a firewall that only allows access to the Talend Data Catalog server.)

Lack of authentication vulnerability. An unauthenticated local user is able to see through the cameras using the web server due to the lack of any form of authentication.

Lack of authentication in the network relays used in MEGVII Koala 2.9.1-c3s allows attackers to grant physical access to anyone by sending packet data to UDP port 5000.

Zyxel CloudCNM SecuManager 3.1.0 and 3.1.1 has no authentication for /registerCpe requests.

Zyxel CloudCNM SecuManager 3.1.0 and 3.1.1 has no authentication for /cnr requests.

Zoho ManageEngine ServiceDesk Plus before 11.1 build 11115 allows remote unauthenticated attackers to change the installation status of deployed agents.

A vulnerability, which was classified as problematic, was found in TOTOLINK A3700R 9.1.2u.5822_B20200513. Affected is an unknown function of the file /wizard.html of the component Password Reset Handler. The manipulation leads to improper access controls. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-272568. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The web administration server in Solar-Log 500 before 2.8.2 Build 52 does not require authentication, which allows remote attackers to gain administrative privileges by connecting to the server. As a result, the attacker can modify configuration files and change the system status. Fixed with 3.0.0-60 11.10.2013 for SL 200, 500, 1000 / not existing for SL 250, 300, 1200, 2000, SL 50 Gateway, SL Base.

Apache Hive before 3.1.3 "CREATE" and "DROP" function operations does not check for necessary authorization of involved entities in the query. It was found that an unauthorized user can manipulate an existing UDF without having the privileges to do so. This allowed unauthorized or underprivileged users to drop and recreate UDFs pointing them to new jars that could be potentially malicious.

Missing authentication in the SetStudentNotes method in IDAttend’s IDWeb application 3.1.052 and earlier allows modification of student data by unauthenticated attackers.

ONLYOFFICE all versions as of 2021-11-08 is affected by Incorrect Access Control. An authentication bypass in the document editor allows attackers to edit documents without authentication.

A vulnerability has been identified in SICAM MMU (All versions < V2.05), SICAM SGU (All versions), SICAM T (All versions < V2.18). An attacker with access to the network could be able to install specially crafted firmware to the device.

OpenClaw is a personal AI assistant. Versions 2026.2.13 and below allow the optional @openclaw/voice-call plugin Telnyx webhook handler to accept unsigned inbound webhook requests when telnyx.publicKey is not configured, enabling unauthenticated callers to forge Telnyx events. Telnyx webhooks are expected to be authenticated via Ed25519 signature verification. In affected versions, TelnyxProvider.verifyWebhook() could effectively fail open when no Telnyx public key was configured, allowing arbitrary HTTP POST requests to the voice-call webhook endpoint to be treated as legitimate Telnyx events. This only impacts deployments where the Voice Call plugin is installed, enabled, and the webhook endpoint is reachable from the attacker (for example, publicly exposed via a tunnel/proxy). The issue has been fixed in version 2026.2.14.

An issue was discovered in the femanager extension before 5.5.3, 6.x before 6.3.4, and 7.x before 7.1.0 for TYPO3. Missing access checks in the InvitationController allow an unauthenticated user to delete all frontend users.

Yoke is a Helm-inspired infrastructure-as-code (IaC) package deployer. In 0.19.0 and earlier, a vulnerability exists in the Air Traffic Controller (ATC) component of Yoke. The ATC webhook endpoints lack proper authentication mechanisms, allowing any pod within the cluster network to directly send AdmissionReview requests to the webhook, bypassing Kubernetes API Server authentication. This enables attackers to trigger WASM module execution in the ATC controller context without proper authorization.

PolarLearn is a free and open-source learning program. In 0-PRERELEASE-16 and earlier, the group chat WebSocket at wss://polarlearn.nl/api/v1/ws can be used without logging in. An unauthenticated client can subscribe to any group chat by providing a group UUID, and can also send messages to any group. The server accepts the message and stores it in the group’s chatContent, so this is not just a visual spam issue.

Apollo is a configuration management system. Prior to version 2.1.0, there are potential security issues if users expose apollo-configservice to the internet, which is not recommended. This is because there is no authentication feature enabled for the built-in eureka service. Malicious hackers may access eureka directly to mock apollo-configservice and apollo-adminservice. Login authentication for eureka was added in version 2.1.0. As a workaround, avoid exposing apollo-configservice to the internet.

An issue was discovered in the femanager extension before 5.5.3, 6.x before 6.3.4, and 7.x before 7.1.0 for TYPO3. Missing access checks in the InvitationController allow an unauthenticated user to set the password of all frontend users.

Functions/EWD_UFAQ_Import.php in the ultimate-faqs plugin through 1.8.24 for WordPress allows unauthenticated options import.

Honeywell Experion PKS Safety Manager through 2022-05-06 has Missing Authentication for a Critical Function. According to FSCT-2022-0051, there is a Honeywell Experion PKS Safety Manager multiple proprietary protocols with unauthenticated functionality issue. The affected components are characterized as: Honeywell Experion TCP (51000/TCP), Safety Builder (51010/TCP). The potential impact is: Manipulate controller state, Manipulate controller configuration, Manipulate controller logic, Manipulate controller files, Manipulate IO. The Honeywell Experion PKS Distributed Control System (DCS) Safety Manager utilizes several proprietary protocols for a wide variety of functionality, including process data acquisition, controller steering and configuration management. These protocols include: Experion TCP (51000/TCP) and Safety Builder (51010/TCP). None of these protocols have any authentication features, allowing any attacker capable of communicating with the ports in question to invoke (a subset of) desired functionality. There is no authentication functionality on the protocols in question. An attacker capable of invoking the protocols' functionalities could achieve a wide range of adverse impacts, including (but not limited to), the following: for Experion TCP (51000/TCP): Issue IO manipulation commands, Issue file read/write commands; and for Safety Builder (51010/TCP): Issue controller start/stop commands, Issue logic download/upload commands, Issue file read commands, Issue system time change commands. A mitigating factor with regards to some, but not all, of the above functionality is that these require the Safety Manager physical keyswitch to be in the right position.

A vulnerability has been identified in SENTRON 7KT PAC1260 Data Manager (All versions). The web interface of affected devices provides an endpoint that allows to enable the ssh service without authentication. This could allow an unauthenticated remote attacker to enable remote access to the device via ssh.

LS ELECTRIC XBC-DN32U with operating system version 01.80 is missing authentication to perform critical functions to the PLC. This could allow an attacker to change the PLC's mode arbitrarily.

On SOYAL AR-727H and AR-829Ev5 devices, all CGI programs allow unauthenticated POST access.

Vulnerability in the Oracle iSetup product of Oracle E-Business Suite (component: General Ledger Update Transform, Reports). Supported versions that are affected are 12.2.3-12.2.12. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle iSetup. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle iSetup accessible data. CVSS 3.1 Base Score 7.5 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N).

RouterOS versions 6.45.6 Stable, 6.44.5 Long-term, and below allow remote unauthenticated attackers to trigger DNS queries via port 8291. The queries are sent from the router to a server of the attacker's choice. The DNS responses are cached by the router, potentially resulting in cache poisoning

The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 allows a remote, unauthenticated attacker to enable telnetd on the router via a crafted HTTP request.

In JetBrains YouTrack before 2025.1.76253 deletion of issues was possible due to missing permission checks in API

search-exclude.php in the "Search Exclude" plugin before 1.2.4 for WordPress allows unauthenticated options changes.

In WhatsUp Gold versions released before 2024.0.2, an unauthenticated attacker can configure LDAP settings.

On Signify Philips Taolight Smart Wi-Fi Wiz Connected LED Bulb 9290022656 devices, an unprotected API lets remote users control the bulb's operation. Anyone can turn the bulb on or off, or change its color or brightness remotely. There is no authentication or encryption to use the control API. The only requirement is that the attacker have network access to the bulb.

A Broken Access Control vulnerability in the D-Link DSL-2680 web administration interface (Firmware EU_1.03) allows an attacker to download the configuration (binary file) settings by submitting a rom-0 GET request without being authenticated on the admin interface.

Vulnerability of lax app identity verification in the pre-authorization function.Successful exploitation of this vulnerability will cause malicious apps to become pre-authorized.

Vulnerability of lax app identity verification in the pre-authorization function.Successful exploitation of this vulnerability will cause malicious apps to become pre-authorized.

A Broken Access Control vulnerability in the D-Link DSL-2680 web administration interface (Firmware EU_1.03) allows an attacker to change DNS servers without being authenticated on the admin interface by submitting a crafted Forms/dns_1 POST request.

Intelbras WRN240 devices do not require authentication to replace the firmware via a POST request to the incoming/Firmware.cfg URI.

A Broken Access Control vulnerability in the D-Link DSL-2680 web administration interface (Firmware EU_1.03) allows an attacker to enable or disable MAC address filtering by submitting a crafted Forms/WlanMacFilter_1 POST request without being authenticated on the admin interface.

includes/class-coming-soon-creator.php in the igniteup plugin through 3.4 for WordPress allows unauthenticated arbitrary file deletion.

Gnuboard 5.5.4 and 5.5.5 is vulnerable to Insecure Permissions. An attacker can change password of all users without knowing victim's original password.

Missing authentication when creating and managing the B&R APROL database in versions < R 4.2-07 allows reading and changing the system configuration. 

On all 7.x and 6.x versions (fixed in 8.0.0), BIG-IQ high availability (HA) when using a Quorum device for automatic failover does not implement any form of authentication with the Corosync daemon. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.

Delta Electronics InfraSuite Device Master versions 00.00.01a and prior lack proper authentication for functions that create and modify user groups. An attacker could provide malicious serialized objects that could run these functions without authentication to create a new user and add them to the administrator group.

IBM Guardium Data Encryption (GDE) 3.0.0.2 and 4.0.0.4 does not perform any authentication for functionality that requires a provable user identity or consumes a significant amount of resources.