In the Linux kernel, the following vulnerability has been resolved: bpf: Fix crash due to incorrect copy_map_value When both bpf_spin_lock and bpf_timer are present in a BPF map value, copy_map_value needs to skirt both objects when copying a value into and out of the map. However, the current code does not set both s_off and t_off in copy_map_value, which leads to a crash when e.g. bpf_spin_lock is placed in map value with bpf_timer, as bpf_map_update_elem call will be able to overwrite the other timer object. When the issue is not fixed, an overwriting can produce the following splat: [root@(none) bpf]# ./test_progs -t timer_crash [ 15.930339] bpf_testmod: loading out-of-tree module taints kernel. [ 16.037849] ================================================================== [ 16.038458] BUG: KASAN: user-memory-access in __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.038944] Write of size 8 at addr 0000000000043ec0 by task test_progs/325 [ 16.039399] [ 16.039514] CPU: 0 PID: 325 Comm: test_progs Tainted: G OE 5.16.0+ #278 [ 16.039983] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.15.0-1 04/01/2014 [ 16.040485] Call Trace: [ 16.040645] <TASK> [ 16.040805] dump_stack_lvl+0x59/0x73 [ 16.041069] ? __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.041427] kasan_report.cold+0x116/0x11b [ 16.041673] ? __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.042040] __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.042328] ? memcpy+0x39/0x60 [ 16.042552] ? pv_hash+0xd0/0xd0 [ 16.042785] ? lockdep_hardirqs_off+0x95/0xd0 [ 16.043079] __bpf_spin_lock_irqsave+0xdf/0xf0 [ 16.043366] ? bpf_get_current_comm+0x50/0x50 [ 16.043608] ? jhash+0x11a/0x270 [ 16.043848] bpf_timer_cancel+0x34/0xe0 [ 16.044119] bpf_prog_c4ea1c0f7449940d_sys_enter+0x7c/0x81 [ 16.044500] bpf_trampoline_6442477838_0+0x36/0x1000 [ 16.044836] __x64_sys_nanosleep+0x5/0x140 [ 16.045119] do_syscall_64+0x59/0x80 [ 16.045377] ? lock_is_held_type+0xe4/0x140 [ 16.045670] ? irqentry_exit_to_user_mode+0xa/0x40 [ 16.046001] ? mark_held_locks+0x24/0x90 [ 16.046287] ? asm_exc_page_fault+0x1e/0x30 [ 16.046569] ? asm_exc_page_fault+0x8/0x30 [ 16.046851] ? lockdep_hardirqs_on+0x7e/0x100 [ 16.047137] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 16.047405] RIP: 0033:0x7f9e4831718d [ 16.047602] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48 [ 16.048764] RSP: 002b:00007fff488086b8 EFLAGS: 00000206 ORIG_RAX: 0000000000000023 [ 16.049275] RAX: ffffffffffffffda RBX: 00007f9e48683740 RCX: 00007f9e4831718d [ 16.049747] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007fff488086d0 [ 16.050225] RBP: 00007fff488086f0 R08: 00007fff488085d7 R09: 00007f9e4cb594a0 [ 16.050648] R10: 0000000000000000 R11: 0000000000000206 R12: 00007f9e484cde30 [ 16.051124] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 16.051608] </TASK> [ 16.051762] ==================================================================

In the Linux kernel, the following vulnerability has been resolved: spi: uniphier: fix reference count leak in uniphier_spi_probe() The issue happens in several error paths in uniphier_spi_probe(). When either dma_get_slave_caps() or devm_spi_register_master() returns an error code, the function forgets to decrease the refcount of both `dma_rx` and `dma_tx` objects, which may lead to refcount leaks. Fix it by decrementing the reference count of specific objects in those error paths.

fs/splice.c in the splice subsystem in the Linux kernel before 2.6.22.2 does not properly handle a failure of the add_to_page_cache_lru function, and subsequently attempts to unlock a page that was not locked, which allows local users to cause a denial of service (kernel BUG and system crash), as demonstrated by the fio I/O tool.

In the Linux kernel, the following vulnerability has been resolved: md: Don't set mddev private to NULL in raid0 pers->free In normal stop process, it does like this: do_md_stop | __md_stop (pers->free(); mddev->private=NULL) | md_free (free mddev) __md_stop sets mddev->private to NULL after pers->free. The raid device will be stopped and mddev memory is free. But in reshape, it doesn't free the mddev and mddev will still be used in new raid. In reshape, it first sets mddev->private to new_pers and then runs old_pers->free(). Now raid0 sets mddev->private to NULL in raid0_free. The new raid can't work anymore. It will panic when dereference mddev->private because of NULL pointer dereference. It can panic like this: [63010.814972] kernel BUG at drivers/md/raid10.c:928! [63010.819778] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [63010.825011] CPU: 3 PID: 44437 Comm: md0_resync Kdump: loaded Not tainted 5.14.0-86.el9.x86_64 #1 [63010.833789] Hardware name: Dell Inc. PowerEdge R6415/07YXFK, BIOS 1.15.0 09/11/2020 [63010.841440] RIP: 0010:raise_barrier+0x161/0x170 [raid10] [63010.865508] RSP: 0018:ffffc312408bbc10 EFLAGS: 00010246 [63010.870734] RAX: 0000000000000000 RBX: ffffa00bf7d39800 RCX: 0000000000000000 [63010.877866] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffa00bf7d39800 [63010.884999] RBP: 0000000000000000 R08: fffffa4945e74400 R09: 0000000000000000 [63010.892132] R10: ffffa00eed02f798 R11: 0000000000000000 R12: ffffa00bbc435200 [63010.899266] R13: ffffa00bf7d39800 R14: 0000000000000400 R15: 0000000000000003 [63010.906399] FS: 0000000000000000(0000) GS:ffffa00eed000000(0000) knlGS:0000000000000000 [63010.914485] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [63010.920229] CR2: 00007f5cfbe99828 CR3: 0000000105efe000 CR4: 00000000003506e0 [63010.927363] Call Trace: [63010.929822] ? bio_reset+0xe/0x40 [63010.933144] ? raid10_alloc_init_r10buf+0x60/0xa0 [raid10] [63010.938629] raid10_sync_request+0x756/0x1610 [raid10] [63010.943770] md_do_sync.cold+0x3e4/0x94c [63010.947698] md_thread+0xab/0x160 [63010.951024] ? md_write_inc+0x50/0x50 [63010.954688] kthread+0x149/0x170 [63010.957923] ? set_kthread_struct+0x40/0x40 [63010.962107] ret_from_fork+0x22/0x30 Removing the code that sets mddev->private to NULL in raid0 can fix problem.

In the Linux kernel, the following vulnerability has been resolved: net/9p: fix uninit-value in p9_client_rpc() Syzbot with the help of KMSAN reported the following error: BUG: KMSAN: uninit-value in trace_9p_client_res include/trace/events/9p.h:146 [inline] BUG: KMSAN: uninit-value in p9_client_rpc+0x1314/0x1340 net/9p/client.c:754 trace_9p_client_res include/trace/events/9p.h:146 [inline] p9_client_rpc+0x1314/0x1340 net/9p/client.c:754 p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031 v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410 v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122 legacy_get_tree+0x114/0x290 fs/fs_context.c:662 vfs_get_tree+0xa7/0x570 fs/super.c:1797 do_new_mount+0x71f/0x15e0 fs/namespace.c:3352 path_mount+0x742/0x1f20 fs/namespace.c:3679 do_mount fs/namespace.c:3692 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount+0x725/0x810 fs/namespace.c:3875 __x64_sys_mount+0xe4/0x150 fs/namespace.c:3875 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: __alloc_pages+0x9d6/0xe70 mm/page_alloc.c:4598 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] alloc_slab_page mm/slub.c:2175 [inline] allocate_slab mm/slub.c:2338 [inline] new_slab+0x2de/0x1400 mm/slub.c:2391 ___slab_alloc+0x1184/0x33d0 mm/slub.c:3525 __slab_alloc mm/slub.c:3610 [inline] __slab_alloc_node mm/slub.c:3663 [inline] slab_alloc_node mm/slub.c:3835 [inline] kmem_cache_alloc+0x6d3/0xbe0 mm/slub.c:3852 p9_tag_alloc net/9p/client.c:278 [inline] p9_client_prepare_req+0x20a/0x1770 net/9p/client.c:641 p9_client_rpc+0x27e/0x1340 net/9p/client.c:688 p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031 v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410 v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122 legacy_get_tree+0x114/0x290 fs/fs_context.c:662 vfs_get_tree+0xa7/0x570 fs/super.c:1797 do_new_mount+0x71f/0x15e0 fs/namespace.c:3352 path_mount+0x742/0x1f20 fs/namespace.c:3679 do_mount fs/namespace.c:3692 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount+0x725/0x810 fs/namespace.c:3875 __x64_sys_mount+0xe4/0x150 fs/namespace.c:3875 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 If p9_check_errors() fails early in p9_client_rpc(), req->rc.tag will not be properly initialized. However, trace_9p_client_res() ends up trying to print it out anyway before p9_client_rpc() finishes. Fix this issue by assigning default values to p9_fcall fields such as 'tag' and (just in case KMSAN unearths something new) 'id' during the tag allocation stage.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775) Fix crash in clear_caseopen Paweł Marciniak reports the following crash, observed when clearing the chassis intrusion alarm. BUG: kernel NULL pointer dereference, address: 0000000000000028 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 4815 Comm: bash Tainted: G S 5.16.2-200.fc35.x86_64 #1 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P2.60A 05/03/2018 RIP: 0010:clear_caseopen+0x5a/0x120 [nct6775] Code: 68 70 e8 e9 32 b1 e3 85 c0 0f 85 d2 00 00 00 48 83 7c 24 ... RSP: 0018:ffffabcb02803dd8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: ffff8e8808192880 RSI: 0000000000000000 RDI: ffff8e87c7509a68 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000000a R10: 000000000000000a R11: f000000000000000 R12: 000000000000001f R13: ffff8e87c7509828 R14: ffff8e87c7509a68 R15: ffff8e88494527a0 FS: 00007f4db9151740(0000) GS:ffff8e8ebfec0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000166b66001 CR4: 00000000001706e0 Call Trace: <TASK> kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x10b/0x180 vfs_write+0x209/0x2a0 ksys_write+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae The problem is that the device passed to clear_caseopen() is the hwmon device, not the platform device, and the platform data is not set in the hwmon device. Store the pointer to sio_data in struct nct6775_data and get if from there if needed.

The (1) real_lookup and (2) __lookup_hash functions in fs/namei.c in the vfs implementation in the Linux kernel before 2.6.25.15 do not prevent creation of a child dentry for a deleted (aka S_DEAD) directory, which allows local users to cause a denial of service ("overflow" of the UBIFS orphan area) via a series of attempted file creations within deleted directories.

In the Linux kernel, the following vulnerability has been resolved: iavf: Fix hang during reboot/shutdown Recent commit 974578017fc1 ("iavf: Add waiting so the port is initialized in remove") adds a wait-loop at the beginning of iavf_remove() to ensure that port initialization is finished prior unregistering net device. This causes a regression in reboot/shutdown scenario because in this case callback iavf_shutdown() is called and this callback detaches the device, makes it down if it is running and sets its state to __IAVF_REMOVE. Later shutdown callback of associated PF driver (e.g. ice_shutdown) is called. That callback calls among other things sriov_disable() that calls indirectly iavf_remove() (see stack trace below). As the adapter state is already __IAVF_REMOVE then the mentioned loop is end-less and shutdown process hangs. The patch fixes this by checking adapter's state at the beginning of iavf_remove() and skips the rest of the function if the adapter is already in remove state (shutdown is in progress). Reproducer: 1. Create VF on PF driven by ice or i40e driver 2. Ensure that the VF is bound to iavf driver 3. Reboot [52625.981294] sysrq: SysRq : Show Blocked State [52625.988377] task:reboot state:D stack: 0 pid:17359 ppid: 1 f2 [52625.996732] Call Trace: [52625.999187] __schedule+0x2d1/0x830 [52626.007400] schedule+0x35/0xa0 [52626.010545] schedule_hrtimeout_range_clock+0x83/0x100 [52626.020046] usleep_range+0x5b/0x80 [52626.023540] iavf_remove+0x63/0x5b0 [iavf] [52626.027645] pci_device_remove+0x3b/0xc0 [52626.031572] device_release_driver_internal+0x103/0x1f0 [52626.036805] pci_stop_bus_device+0x72/0xa0 [52626.040904] pci_stop_and_remove_bus_device+0xe/0x20 [52626.045870] pci_iov_remove_virtfn+0xba/0x120 [52626.050232] sriov_disable+0x2f/0xe0 [52626.053813] ice_free_vfs+0x7c/0x340 [ice] [52626.057946] ice_remove+0x220/0x240 [ice] [52626.061967] ice_shutdown+0x16/0x50 [ice] [52626.065987] pci_device_shutdown+0x34/0x60 [52626.070086] device_shutdown+0x165/0x1c5 [52626.074011] kernel_restart+0xe/0x30 [52626.077593] __do_sys_reboot+0x1d2/0x210 [52626.093815] do_syscall_64+0x5b/0x1a0 [52626.097483] entry_SYSCALL_64_after_hwframe+0x65/0xca

A denial of service vulnerability was found in n_tty_receive_char_special in drivers/tty/n_tty.c of the Linux kernel. In this flaw a local attacker with a normal user privilege could delay the loop (due to a changing ldata->read_head, and a missing sanity check) and cause a threat to the system availability.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix command stats access after free Command may fail while driver is reloading and can't accept FW commands till command interface is reinitialized. Such command failure is being logged to command stats. This results in NULL pointer access as command stats structure is being freed and reallocated during mlx5 devlink reload (see kernel log below). Fix it by making command stats statically allocated on driver probe. Kernel log: [ 2394.808802] BUG: unable to handle kernel paging request at 000000000002a9c0 [ 2394.810610] PGD 0 P4D 0 [ 2394.811811] Oops: 0002 [#1] SMP NOPTI ... [ 2394.815482] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0 ... [ 2394.829505] Call Trace: [ 2394.830667] _raw_spin_lock_irq+0x23/0x26 [ 2394.831858] cmd_status_err+0x55/0x110 [mlx5_core] [ 2394.833020] mlx5_access_reg+0xe7/0x150 [mlx5_core] [ 2394.834175] mlx5_query_port_ptys+0x78/0xa0 [mlx5_core] [ 2394.835337] mlx5e_ethtool_get_link_ksettings+0x74/0x590 [mlx5_core] [ 2394.836454] ? kmem_cache_alloc_trace+0x140/0x1c0 [ 2394.837562] __rh_call_get_link_ksettings+0x33/0x100 [ 2394.838663] ? __rtnl_unlock+0x25/0x50 [ 2394.839755] __ethtool_get_link_ksettings+0x72/0x150 [ 2394.840862] duplex_show+0x6e/0xc0 [ 2394.841963] dev_attr_show+0x1c/0x40 [ 2394.843048] sysfs_kf_seq_show+0x9b/0x100 [ 2394.844123] seq_read+0x153/0x410 [ 2394.845187] vfs_read+0x91/0x140 [ 2394.846226] ksys_read+0x4f/0xb0 [ 2394.847234] do_syscall_64+0x5b/0x1a0 [ 2394.848228] entry_SYSCALL_64_after_hwframe+0x65/0xca

A flaw was found in the way memory resources were freed in the unix_stream_recvmsg function in the Linux kernel when a signal was pending. This flaw allows an unprivileged local user to crash the system by exhausting available memory. The highest threat from this vulnerability is to system availability.

In the Linux kernel, the following vulnerability has been resolved: remoteproc: core: Clear table_sz when rproc_shutdown There is case as below could trigger kernel dump: Use U-Boot to start remote processor(rproc) with resource table published to a fixed address by rproc. After Kernel boots up, stop the rproc, load a new firmware which doesn't have resource table ,and start rproc. When starting rproc with a firmware not have resource table, `memcpy(loaded_table, rproc->cached_table, rproc->table_sz)` will trigger dump, because rproc->cache_table is set to NULL during the last stop operation, but rproc->table_sz is still valid. This issue is found on i.MX8MP and i.MX9. Dump as below: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af63000 [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 UID: 0 PID: 1060 Comm: sh Not tainted 6.14.0-rc7-next-20250317-dirty #38 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __pi_memcpy_generic+0x110/0x22c lr : rproc_start+0x88/0x1e0 Call trace: __pi_memcpy_generic+0x110/0x22c (P) rproc_boot+0x198/0x57c state_store+0x40/0x104 dev_attr_store+0x18/0x2c sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x120/0x1cc vfs_write+0x240/0x378 ksys_write+0x70/0x108 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x30/0xcc el0t_64_sync_handler+0x10c/0x138 el0t_64_sync+0x198/0x19c Clear rproc->table_sz to address the issue.

NVIDIA GPU Display Driver for Windows and Linux, all versions, contains a vulnerability in the kernel mode layer (nvlddmkm.sys) handler for DxgkDdiEscape or IOCTL in which improper validation of a user pointer may lead to denial of service.

A deadlock flaw was found in the Linux kernel’s BPF subsystem. This flaw allows a local user to potentially crash the system.

A vulnerability was reported in the Open vSwitch sub-component in the Linux Kernel. The flaw occurs when a recursive operation of code push recursively calls into the code block. The OVS module does not validate the stack depth, pushing too many frames and causing a stack overflow. As a result, this can lead to a crash or other related issues.

In the Linux kernel, the following vulnerability has been resolved: media: [next] staging: media: atomisp: fix memory leak of object flash In the case where the call to lm3554_platform_data_func returns an error there is a memory leak on the error return path of object flash. Fix this by adding an error return path that will free flash and rename labels fail2 to fail3 and fail1 to fail2.

A denial of service vulnerability was found in tipc_crypto_key_revoke in net/tipc/crypto.c in the Linux kernel’s TIPC subsystem. This flaw allows guests with local user privileges to trigger a deadlock and potentially crash the system.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix null-ptr-deref in block_dirty_buffer tracepoint When using the "block:block_dirty_buffer" tracepoint, mark_buffer_dirty() may cause a NULL pointer dereference, or a general protection fault when KASAN is enabled. This happens because, since the tracepoint was added in mark_buffer_dirty(), it references the dev_t member bh->b_bdev->bd_dev regardless of whether the buffer head has a pointer to a block_device structure. In the current implementation, nilfs_grab_buffer(), which grabs a buffer to read (or create) a block of metadata, including b-tree node blocks, does not set the block device, but instead does so only if the buffer is not in the "uptodate" state for each of its caller block reading functions. However, if the uptodate flag is set on a folio/page, and the buffer heads are detached from it by try_to_free_buffers(), and new buffer heads are then attached by create_empty_buffers(), the uptodate flag may be restored to each buffer without the block device being set to bh->b_bdev, and mark_buffer_dirty() may be called later in that state, resulting in the bug mentioned above. Fix this issue by making nilfs_grab_buffer() always set the block device of the super block structure to the buffer head, regardless of the state of the buffer's uptodate flag.

A denial of service vulnerability due to a deadlock was found in sctp_auto_asconf_init in net/sctp/socket.c in the Linux kernel’s SCTP subsystem. This flaw allows guests with local user privileges to trigger a deadlock and potentially crash the system.

ext4_protect_reserved_inode in fs/ext4/block_validity.c in the Linux kernel through 5.5.3 allows attackers to cause a denial of service (soft lockup) via a crafted journal size.

An issue was discovered in the Linux kernel 5.4 and 5.5 through 5.5.6 on the AArch64 architecture. It ignores the top byte in the address passed to the brk system call, potentially moving the memory break downwards when the application expects it to move upwards, aka CID-dcde237319e6. This has been observed to cause heap corruption with the GNU C Library malloc implementation.

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Ensure that objs is not NULL in virtio_gpu_array_put_free() If virtio_gpu_object_shmem_init() fails (e.g. due to fault injection, as it happened in the bug report by syzbot), virtio_gpu_array_put_free() could be called with objs equal to NULL. Ensure that objs is not NULL in virtio_gpu_array_put_free(), or otherwise return from the function.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix NULL ptr dereference on VSI filter sync Remove the reason of null pointer dereference in sync VSI filters. Added new I40E_VSI_RELEASING flag to signalize deleting and releasing of VSI resources to sync this thread with sync filters subtask. Without this patch it is possible to start update the VSI filter list after VSI is removed, that's causing a kernel oops.

In the Linux kernel, the following vulnerability has been resolved: net: hamradio: fix memory leak in mkiss_close My local syzbot instance hit memory leak in mkiss_open()[1]. The problem was in missing free_netdev() in mkiss_close(). In mkiss_open() netdevice is allocated and then registered, but in mkiss_close() netdevice was only unregistered, but not freed. Fail log: BUG: memory leak unreferenced object 0xffff8880281ba000 (size 4096): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00 ax0............. 00 27 fa 2a 80 88 ff ff 00 00 00 00 00 00 00 00 .'.*............ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706e7e8>] alloc_netdev_mqs+0x98/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880141a9a00 (size 96): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): e8 a2 1b 28 80 88 ff ff e8 a2 1b 28 80 88 ff ff ...(.......(.... 98 92 9c aa b0 40 02 00 00 00 00 00 00 00 00 00 .....@.......... backtrace: [<ffffffff8709f68b>] __hw_addr_create_ex+0x5b/0x310 [<ffffffff8709fb38>] __hw_addr_add_ex+0x1f8/0x2b0 [<ffffffff870a0c7b>] dev_addr_init+0x10b/0x1f0 [<ffffffff8706e88b>] alloc_netdev_mqs+0x13b/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880219bfc00 (size 512): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 a0 1b 28 80 88 ff ff 80 8f b1 8d ff ff ff ff ...(............ 80 8f b1 8d ff ff ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706eec7>] alloc_netdev_mqs+0x777/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff888029b2b200 (size 256): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706f062>] alloc_netdev_mqs+0x912/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: i2c: cadence: fix reference leak when pm_runtime_get_sync fails The PM reference count is not expected to be incremented on return in functions cdns_i2c_master_xfer and cdns_reg_slave. However, pm_runtime_get_sync will increment pm usage counter even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced.

An issue was discovered in the FUSE filesystem implementation in the Linux kernel before 5.10.6, aka CID-5d069dbe8aaf. fuse_do_getattr() calls make_bad_inode() in inappropriate situations, causing a system crash. NOTE: the original fix for this vulnerability was incomplete, and its incompleteness is tracked as CVE-2021-28950.

In the Linux kernel, the following vulnerability has been resolved: net:sfc: fix non-freed irq in legacy irq mode SFC driver can be configured via modparam to work using MSI-X, MSI or legacy IRQ interrupts. In the last one, the interrupt was not properly released on module remove. It was not freed because the flag irqs_hooked was not set during initialization in the case of using legacy IRQ. Example of (trimmed) trace during module remove without this fix: remove_proc_entry: removing non-empty directory 'irq/125', leaking at least '0000:3b:00.1' WARNING: CPU: 39 PID: 3658 at fs/proc/generic.c:715 remove_proc_entry+0x15c/0x170 ...trimmed... Call Trace: unregister_irq_proc+0xe3/0x100 free_desc+0x29/0x70 irq_free_descs+0x47/0x70 mp_unmap_irq+0x58/0x60 acpi_unregister_gsi_ioapic+0x2a/0x40 acpi_pci_irq_disable+0x78/0xb0 pci_disable_device+0xd1/0x100 efx_pci_remove+0xa1/0x1e0 [sfc] pci_device_remove+0x38/0xa0 __device_release_driver+0x177/0x230 driver_detach+0xcb/0x110 bus_remove_driver+0x58/0xd0 pci_unregister_driver+0x2a/0xb0 efx_exit_module+0x24/0xf40 [sfc] __do_sys_delete_module.constprop.0+0x171/0x280 ? exit_to_user_mode_prepare+0x83/0x1d0 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f9f9385800b ...trimmed...

In the Linux kernel, the following vulnerability has been resolved: tcp: fix tcp_init_transfer() to not reset icsk_ca_initialized This commit fixes a bug (found by syzkaller) that could cause spurious double-initializations for congestion control modules, which could cause memory leaks or other problems for congestion control modules (like CDG) that allocate memory in their init functions. The buggy scenario constructed by syzkaller was something like: (1) create a TCP socket (2) initiate a TFO connect via sendto() (3) while socket is in TCP_SYN_SENT, call setsockopt(TCP_CONGESTION), which calls: tcp_set_congestion_control() -> tcp_reinit_congestion_control() -> tcp_init_congestion_control() (4) receive ACK, connection is established, call tcp_init_transfer(), set icsk_ca_initialized=0 (without first calling cc->release()), call tcp_init_congestion_control() again. Note that in this sequence tcp_init_congestion_control() is called twice without a cc->release() call in between. Thus, for CC modules that allocate memory in their init() function, e.g, CDG, a memory leak may occur. The syzkaller tool managed to find a reproducer that triggered such a leak in CDG. The bug was introduced when that commit 8919a9b31eb4 ("tcp: Only init congestion control if not initialized already") introduced icsk_ca_initialized and set icsk_ca_initialized to 0 in tcp_init_transfer(), missing the possibility for a sequence like the one above, where a process could call setsockopt(TCP_CONGESTION) in state TCP_SYN_SENT (i.e. after the connect() or TFO open sendmsg()), which would call tcp_init_congestion_control(). It did not intend to reset any initialization that the user had already explicitly made; it just missed the possibility of that particular sequence (which syzkaller managed to find).

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Return CQE error if invalid lkey was supplied RXE is missing update of WQE status in LOCAL_WRITE failures. This caused the following kernel panic if someone sent an atomic operation with an explicitly wrong lkey. [leonro@vm ~]$ mkt test test_atomic_invalid_lkey (tests.test_atomic.AtomicTest) ... WARNING: CPU: 5 PID: 263 at drivers/infiniband/sw/rxe/rxe_comp.c:740 rxe_completer+0x1a6d/0x2e30 [rdma_rxe] Modules linked in: crc32_generic rdma_rxe ip6_udp_tunnel udp_tunnel rdma_ucm rdma_cm ib_umad ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core ptp pps_core CPU: 5 PID: 263 Comm: python3 Not tainted 5.13.0-rc1+ #2936 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:rxe_completer+0x1a6d/0x2e30 [rdma_rxe] Code: 03 0f 8e 65 0e 00 00 3b 93 10 06 00 00 0f 84 82 0a 00 00 4c 89 ff 4c 89 44 24 38 e8 2d 74 a9 e1 4c 8b 44 24 38 e9 1c f5 ff ff <0f> 0b e9 0c e8 ff ff b8 05 00 00 00 41 bf 05 00 00 00 e9 ab e7 ff RSP: 0018:ffff8880158af090 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888016a78000 RCX: ffffffffa0cf1652 RDX: 1ffff9200004b442 RSI: 0000000000000004 RDI: ffffc9000025a210 RBP: dffffc0000000000 R08: 00000000ffffffea R09: ffff88801617740b R10: ffffed1002c2ee81 R11: 0000000000000007 R12: ffff88800f3b63e8 R13: ffff888016a78008 R14: ffffc9000025a180 R15: 000000000000000c FS: 00007f88b622a740(0000) GS:ffff88806d540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f88b5a1fa10 CR3: 000000000d848004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rxe_do_task+0x130/0x230 [rdma_rxe] rxe_rcv+0xb11/0x1df0 [rdma_rxe] rxe_loopback+0x157/0x1e0 [rdma_rxe] rxe_responder+0x5532/0x7620 [rdma_rxe] rxe_do_task+0x130/0x230 [rdma_rxe] rxe_rcv+0x9c8/0x1df0 [rdma_rxe] rxe_loopback+0x157/0x1e0 [rdma_rxe] rxe_requester+0x1efd/0x58c0 [rdma_rxe] rxe_do_task+0x130/0x230 [rdma_rxe] rxe_post_send+0x998/0x1860 [rdma_rxe] ib_uverbs_post_send+0xd5f/0x1220 [ib_uverbs] ib_uverbs_write+0x847/0xc80 [ib_uverbs] vfs_write+0x1c5/0x840 ksys_write+0x176/0x1d0 do_syscall_64+0x3f/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv() syzbot found __ip6_tnl_rcv() could access unitiliazed data [1]. Call pskb_inet_may_pull() to fix this, and initialize ipv6h variable after this call as it can change skb->head. [1] BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321 ip6ip6_dscp_ecn_decapsulate+0x178/0x1b0 net/ipv6/ip6_tunnel.c:727 __ip6_tnl_rcv+0xd4e/0x1590 net/ipv6/ip6_tunnel.c:845 ip6_tnl_rcv+0xce/0x100 net/ipv6/ip6_tunnel.c:888 gre_rcv+0x143f/0x1870 ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:461 [inline] ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:314 [inline] ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5532 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5646 netif_receive_skb_internal net/core/dev.c:5732 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5791 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555 tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2084 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0x786/0x1200 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x318/0x740 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2787 tun_alloc_skb drivers/net/tun.c:1531 [inline] tun_get_user+0x1e8a/0x66d0 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2084 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0x786/0x1200 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 0 PID: 5034 Comm: syz-executor331 Not tainted 6.7.0-syzkaller-00562-g9f8413c4a66f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023

In the Linux kernel, the following vulnerability has been resolved: dma-buf/sync_file: Don't leak fences on merge failure Each add_fence() call does a dma_fence_get() on the relevant fence. In the error path, we weren't calling dma_fence_put() so all those fences got leaked. Also, in the krealloc_array failure case, we weren't freeing the fences array. Instead, ensure that i and fences are always zero-initialized and dma_fence_put() all the fences and kfree(fences) on every error path.

In the Linux kernel, the following vulnerability has been resolved: NFC: nci: fix memory leak in nci_allocate_device nfcmrvl_disconnect fails to free the hci_dev field in struct nci_dev. Fix this by freeing hci_dev in nci_free_device. BUG: memory leak unreferenced object 0xffff888111ea6800 (size 1024): comm "kworker/1:0", pid 19, jiffies 4294942308 (age 13.580s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 60 fd 0c 81 88 ff ff .........`...... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000004bc25d43>] kmalloc include/linux/slab.h:552 [inline] [<000000004bc25d43>] kzalloc include/linux/slab.h:682 [inline] [<000000004bc25d43>] nci_hci_allocate+0x21/0xd0 net/nfc/nci/hci.c:784 [<00000000c59cff92>] nci_allocate_device net/nfc/nci/core.c:1170 [inline] [<00000000c59cff92>] nci_allocate_device+0x10b/0x160 net/nfc/nci/core.c:1132 [<00000000006e0a8e>] nfcmrvl_nci_register_dev+0x10a/0x1c0 drivers/nfc/nfcmrvl/main.c:153 [<000000004da1b57e>] nfcmrvl_probe+0x223/0x290 drivers/nfc/nfcmrvl/usb.c:345 [<00000000d506aed9>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554 [<00000000f5009125>] driver_probe_device+0x84/0x100 drivers/base/dd.c:740 [<000000000ce658ca>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:846 [<000000007067d05f>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431 [<00000000f8e13372>] __device_attach+0x122/0x250 drivers/base/dd.c:914 [<000000009cf68860>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491 [<00000000359c965a>] device_add+0x5be/0xc30 drivers/base/core.c:3109 [<00000000086e4bd3>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2164 [<00000000ca036872>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 [<00000000d40d36f6>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293 [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554

In the Linux kernel, the following vulnerability has been resolved: md: Don't register sync_thread for reshape directly Currently, if reshape is interrupted, then reassemble the array will register sync_thread directly from pers->run(), in this case 'MD_RECOVERY_RUNNING' is set directly, however, there is no guarantee that md_do_sync() will be executed, hence stop_sync_thread() will hang because 'MD_RECOVERY_RUNNING' can't be cleared. Last patch make sure that md_do_sync() will set MD_RECOVERY_DONE, however, following hang can still be triggered by dm-raid test shell/lvconvert-raid-reshape.sh occasionally: [root@fedora ~]# cat /proc/1982/stack [<0>] stop_sync_thread+0x1ab/0x270 [md_mod] [<0>] md_frozen_sync_thread+0x5c/0xa0 [md_mod] [<0>] raid_presuspend+0x1e/0x70 [dm_raid] [<0>] dm_table_presuspend_targets+0x40/0xb0 [dm_mod] [<0>] __dm_destroy+0x2a5/0x310 [dm_mod] [<0>] dm_destroy+0x16/0x30 [dm_mod] [<0>] dev_remove+0x165/0x290 [dm_mod] [<0>] ctl_ioctl+0x4bb/0x7b0 [dm_mod] [<0>] dm_ctl_ioctl+0x11/0x20 [dm_mod] [<0>] vfs_ioctl+0x21/0x60 [<0>] __x64_sys_ioctl+0xb9/0xe0 [<0>] do_syscall_64+0xc6/0x230 [<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74 Meanwhile mddev->recovery is: MD_RECOVERY_RUNNING | MD_RECOVERY_INTR | MD_RECOVERY_RESHAPE | MD_RECOVERY_FROZEN Fix this problem by remove the code to register sync_thread directly from raid10 and raid5. And let md_check_recovery() to register sync_thread.

In the Linux kernel, the following vulnerability has been resolved: drivers: perf: ctr_get_width function for legacy is not defined With parameters CONFIG_RISCV_PMU_LEGACY=y and CONFIG_RISCV_PMU_SBI=n linux kernel crashes when you try perf record: $ perf record ls [ 46.749286] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 46.750199] Oops [#1] [ 46.750342] Modules linked in: [ 46.750608] CPU: 0 PID: 107 Comm: perf-exec Not tainted 6.6.0 #2 [ 46.750906] Hardware name: riscv-virtio,qemu (DT) [ 46.751184] epc : 0x0 [ 46.751430] ra : arch_perf_update_userpage+0x54/0x13e [ 46.751680] epc : 0000000000000000 ra : ffffffff8072ee52 sp : ff2000000022b8f0 [ 46.751958] gp : ffffffff81505988 tp : ff6000000290d400 t0 : ff2000000022b9c0 [ 46.752229] t1 : 0000000000000001 t2 : 0000000000000003 s0 : ff2000000022b930 [ 46.752451] s1 : ff600000028fb000 a0 : 0000000000000000 a1 : ff600000028fb000 [ 46.752673] a2 : 0000000ae2751268 a3 : 00000000004fb708 a4 : 0000000000000004 [ 46.752895] a5 : 0000000000000000 a6 : 000000000017ffe3 a7 : 00000000000000d2 [ 46.753117] s2 : ff600000028fb000 s3 : 0000000ae2751268 s4 : 0000000000000000 [ 46.753338] s5 : ffffffff8153e290 s6 : ff600000863b9000 s7 : ff60000002961078 [ 46.753562] s8 : ff60000002961048 s9 : ff60000002961058 s10: 0000000000000001 [ 46.753783] s11: 0000000000000018 t3 : ffffffffffffffff t4 : ffffffffffffffff [ 46.754005] t5 : ff6000000292270c t6 : ff2000000022bb30 [ 46.754179] status: 0000000200000100 badaddr: 0000000000000000 cause: 000000000000000c [ 46.754653] Code: Unable to access instruction at 0xffffffffffffffec. [ 46.754939] ---[ end trace 0000000000000000 ]--- [ 46.755131] note: perf-exec[107] exited with irqs disabled [ 46.755546] note: perf-exec[107] exited with preempt_count 4 This happens because in the legacy case the ctr_get_width function was not defined, but it is used in arch_perf_update_userpage. Also remove extra check in riscv_pmu_ctr_get_width_mask

In the Linux kernel, the following vulnerability has been resolved: fs: sysfs: Fix reference leak in sysfs_break_active_protection() The sysfs_break_active_protection() routine has an obvious reference leak in its error path. If the call to kernfs_find_and_get() fails then kn will be NULL, so the companion sysfs_unbreak_active_protection() routine won't get called (and would only cause an access violation by trying to dereference kn->parent if it was called). As a result, the reference to kobj acquired at the start of the function will never be released. Fix the leak by adding an explicit kobject_put() call when kn is NULL.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested.

In the Linux kernel, the following vulnerability has been resolved: cxl/pci: Skip to handle RAS errors if CXL.mem device is detached The PCI AER model is an awkward fit for CXL error handling. While the expectation is that a PCI device can escalate to link reset to recover from an AER event, the same reset on CXL amounts to a surprise memory hotplug of massive amounts of memory. At present, the CXL error handler attempts some optimistic error handling to unbind the device from the cxl_mem driver after reaping some RAS register values. This results in a "hopeful" attempt to unplug the memory, but there is no guarantee that will succeed. A subsequent AER notification after the memdev unbind event can no longer assume the registers are mapped. Check for memdev bind before reaping status register values to avoid crashes of the form: BUG: unable to handle page fault for address: ffa00000195e9100 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page [...] RIP: 0010:__cxl_handle_ras+0x30/0x110 [cxl_core] [...] Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x82/0x160 ? kernelmode_fixup_or_oops+0x84/0x110 ? exc_page_fault+0x113/0x170 ? asm_exc_page_fault+0x26/0x30 ? __pfx_dpc_reset_link+0x10/0x10 ? __cxl_handle_ras+0x30/0x110 [cxl_core] ? find_cxl_port+0x59/0x80 [cxl_core] cxl_handle_rp_ras+0xbc/0xd0 [cxl_core] cxl_error_detected+0x6c/0xf0 [cxl_core] report_error_detected+0xc7/0x1c0 pci_walk_bus+0x73/0x90 pcie_do_recovery+0x23f/0x330 Longer term, the unbind and PCI_ERS_RESULT_DISCONNECT behavior might need to be replaced with a new PCI_ERS_RESULT_PANIC.

A security vulnerability in the Spectrum Scale 5.0 and 5.1 allows a non-root user to overflow the mmfsd daemon with requests and preventing the daemon to service other requests. IBM X-Force ID: 191599.

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix memleak in io_init_wq_offload() I got memory leak report when doing fuzz test: BUG: memory leak unreferenced object 0xffff888107310a80 (size 96): comm "syz-executor.6", pid 4610, jiffies 4295140240 (age 20.135s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... backtrace: [<000000001974933b>] kmalloc include/linux/slab.h:591 [inline] [<000000001974933b>] kzalloc include/linux/slab.h:721 [inline] [<000000001974933b>] io_init_wq_offload fs/io_uring.c:7920 [inline] [<000000001974933b>] io_uring_alloc_task_context+0x466/0x640 fs/io_uring.c:7955 [<0000000039d0800d>] __io_uring_add_tctx_node+0x256/0x360 fs/io_uring.c:9016 [<000000008482e78c>] io_uring_add_tctx_node fs/io_uring.c:9052 [inline] [<000000008482e78c>] __do_sys_io_uring_enter fs/io_uring.c:9354 [inline] [<000000008482e78c>] __se_sys_io_uring_enter fs/io_uring.c:9301 [inline] [<000000008482e78c>] __x64_sys_io_uring_enter+0xabc/0xc20 fs/io_uring.c:9301 [<00000000b875f18f>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000b875f18f>] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 [<000000006b0a8484>] entry_SYSCALL_64_after_hwframe+0x44/0xae CPU0 CPU1 io_uring_enter io_uring_enter io_uring_add_tctx_node io_uring_add_tctx_node __io_uring_add_tctx_node __io_uring_add_tctx_node io_uring_alloc_task_context io_uring_alloc_task_context io_init_wq_offload io_init_wq_offload hash = kzalloc hash = kzalloc ctx->hash_map = hash ctx->hash_map = hash <- one of the hash is leaked When calling io_uring_enter() in parallel, the 'hash_map' will be leaked, add uring_lock to protect 'hash_map'.

IBM Spectrum Scale for IBM Elastic Storage Server 5.3.0 through 5.3.5 could allow an authenticated user to cause a denial of service during deployment or upgrade pertaining to xcat services. IBM X-Force ID: 179163.

An issue was discovered in the Linux kernel before 5.8. lib/nlattr.c allows attackers to cause a denial of service (unbounded recursion) via a nested Netlink policy with a back reference.

In the Linux kernel, the following vulnerability has been resolved: media: aspeed: fix clock handling logic Video engine uses eclk and vclk for its clock sources and its reset control is coupled with eclk so the current clock enabling sequence works like below. Enable eclk De-assert Video Engine reset 10ms delay Enable vclk It introduces improper reset on the Video Engine hardware and eventually the hardware generates unexpected DMA memory transfers that can corrupt memory region in random and sporadic patterns. This issue is observed very rarely on some specific AST2500 SoCs but it causes a critical kernel panic with making a various shape of signature so it's extremely hard to debug. Moreover, the issue is observed even when the video engine is not actively used because udevd turns on the video engine hardware for a short time to make a query in every boot. To fix this issue, this commit changes the clock handling logic to make the reset de-assertion triggered after enabling both eclk and vclk. Also, it adds clk_unprepare call for a case when probe fails. clk: ast2600: fix reset settings for eclk and vclk Video engine reset setting should be coupled with eclk to match it with the setting for previous Aspeed SoCs which is defined in clk-aspeed.c since all Aspeed SoCs are sharing a single video engine driver. Also, reset bit 6 is defined as 'Video Engine' reset in datasheet so it should be de-asserted when eclk is enabled. This commit fixes the setting.

In the Linux kernel, the following vulnerability has been resolved: i2c: imx-lpi2c: fix reference leak when pm_runtime_get_sync fails The PM reference count is not expected to be incremented on return in lpi2c_imx_master_enable. However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced.

An issue was discovered in the Linux kernel before 5.9. arch/x86/kvm/svm/sev.c allows attackers to cause a denial of service (soft lockup) by triggering destruction of a large SEV VM (which requires unregistering many encrypted regions), aka CID-7be74942f184.

In the Linux kernel, the following vulnerability has been resolved: i2c: xiic: fix reference leak when pm_runtime_get_sync fails The PM reference count is not expected to be incremented on return in xiic_xfer and xiic_i2c_remove. However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced.

An issue was discovered in the Linux kernel before 5.8. arch/x86/kvm/svm/svm.c allows a set_memory_region_test infinite loop for certain nested page faults, aka CID-e72436bc3a52.

In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix reference leak when pm_runtime_get_sync fails In i2c_imx_xfer() and i2c_imx_remove(), the pm reference count is not expected to be incremented on return. However, pm_runtime_get_sync will increment pm reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced.

fs/direct-io.c in the dio subsystem in the Linux kernel before 2.6.23 does not properly zero out the dio struct, which allows local users to cause a denial of service (OOPS), as demonstrated by a certain fio test.

In the Linux kernel, the following vulnerability has been resolved: can: dev: can_get_echo_skb(): prevent call to kfree_skb() in hard IRQ context If a driver calls can_get_echo_skb() during a hardware IRQ (which is often, but not always, the case), the 'WARN_ON(in_irq)' in net/core/skbuff.c#skb_release_head_state() might be triggered, under network congestion circumstances, together with the potential risk of a NULL pointer dereference. The root cause of this issue is the call to kfree_skb() instead of dev_kfree_skb_irq() in net/core/dev.c#enqueue_to_backlog(). This patch prevents the skb to be freed within the call to netif_rx() by incrementing its reference count with skb_get(). The skb is finally freed by one of the in-irq-context safe functions: dev_consume_skb_any() or dev_kfree_skb_any(). The "any" version is used because some drivers might call can_get_echo_skb() in a normal context. The reason for this issue to occur is that initially, in the core network stack, loopback skb were not supposed to be received in hardware IRQ context. The CAN stack is an exeption. This bug was previously reported back in 2017 in [1] but the proposed patch never got accepted. While [1] directly modifies net/core/dev.c, we try to propose here a smoother modification local to CAN network stack (the assumption behind is that only CAN devices are affected by this issue). [1] http://lore.kernel.org/r/57a3ffb6-3309-3ad5-5a34-e93c3fe3614d@cetitec.com

In the Linux kernel, the following vulnerability has been resolved: media: dvbdev: Fix memory leak in dvb_media_device_free() dvb_media_device_free() is leaking memory. Free `dvbdev->adapter->conn` before setting it to NULL, as documented in include/media/media-device.h: "The media_entity instance itself must be freed explicitly by the driver if required."