The vulnerability described by CVE-2023-0972 has been additionally discovered in Silicon Labs Z-Wave end devices. This vulnerability may allow an unauthenticated attacker within Z-Wave range to overflow a stack buffer, leading to arbitrary code execution.

Description: A vulnerability in SiLabs Z/IP Gateway 7.18.01 and earlier allows an unauthenticated attacker within Z-Wave range to overflow a stack buffer, leading to arbitrary code execution.

Description: A vulnerability in SiLabs Unify Gateway 1.3.1 and earlier allows an unauthenticated attacker within Z-Wave range to overflow a stack buffer, leading to arbitrary code execution.

An issue in Silicon Labs Z-Wave Series 500 v6.84.0 allows attackers to execute arbitrary code.

Z-Wave devices based on Silicon Labs 100, 200, and 300 series chipsets do not support encryption, allowing an attacker within radio range to take control of or cause a denial of service to a vulnerable device. An attacker can also capture and replay Z-Wave traffic. Firmware upgrades cannot directly address this vulnerability as it is an issue with the Z-Wave specification for these legacy chipsets. One way to protect against this vulnerability is to use 500 or 700 series chipsets that support Security 2 (S2) encryption. As examples, the Linear WADWAZ-1 version 3.43 and WAPIRZ-1 version 3.43 (with 300 series chipsets) are vulnerable.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Silicon Labs Gecko OS. Authentication is not required to exploit this vulnerability.  The specific flaw exists within the handling of HTTP GET requests. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Silicon Labs Gecko OS. Authentication is not required to exploit this vulnerability. The specific flaw exists within the implementation of the http_download command. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device.

A logic error in SiLabs Z/IP Gateway SDK 7.18.02 and earlier allows authentication to be bypassed, remote administration of Z-Wave controllers, and S0/S2 encryption keys to be recovered.

Insecure permissions in Silicon Labs (SiLabs) Z-Wave Series 700 and 800 v7.21.1 allow attackers to create a fake node via supplying crafted packets.

A potential buffer overflow exists in the Bluetooth LE HCI CPC sample application in the Gecko SDK which may result in a denial of service or remote code execution

Heap based buffer overflow in HTTP Server functionality in Micrium uC-HTTP 3.01.01 allows remote code execution via HTTP request.

Out-of-Bounds error in GBL parser in Silicon Labs Gecko Bootloader version 4.0.1 and earlier allows attacker to overwrite flash Sign key and OTA decryption key via malicious bootloader upgrade.

 A malformed packet containing an invalid destination address, causes a stack overflow in the Ember ZNet stack. This causes an assert which leads to a reset, immediately clearing the error.

A malformed packet causes a stack overflow in the Ember ZNet stack. This causes an assert which leads to a reset, immediately clearing the error.

A heap-based buffer overflow vulnerability exists in the HTTP Server form boundary functionality of Weston Embedded uC-HTTP v3.01.01. A specially crafted network packet can lead to code execution. An attacker can send a malicious packet to trigger this vulnerability.

Buffer overflow in Platform CLI component in Silicon Labs Gecko SDK v4.2.1 and earlier allows user to overwrite limited structures on the heap.

An out-of-bounds write vulnerability exists in the HTTP Server functionality of Weston Embedded uC-HTTP v3.01.01. A specially crafted network packet can lead to memory corruption. An attacker can send a network request to trigger this vulnerability.

Silicon Labs Gecko OS HTTP Request Handling Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Silicon Labs Gecko OS. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HTTP requests. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-23245.

An unvalidated input in Silicon Labs TrustZone implementation in v4.3.x and earlier of the Gecko SDK allows an attacker to access the trusted region of memory from the untrusted region.

Buffer Copy without Checking Size of Input ('Classic Buffer Overflow'), Out-of-bounds Write, Download of Code Without Integrity Check vulnerability in Silicon Labs Gecko Bootloader on ARM (Firmware Update File Parser modules) allows Code Injection, Authentication Bypass.This issue affects "Standalone" and "Application" versions of Gecko Bootloader.

An unvalidated input in a library function responsible for communicating between secure and non-secure memory in Silicon Labs TrustZone implementation allows reading/writing of memory in the secure region of memory from the non-secure region of memory.

A heap-based buffer overflow vulnerability exists in the HTTP Server functionality of Weston Embedded uC-HTTP git commit 80d4004. A specially crafted network packet can lead to arbitrary code execution. An attacker can send a malicious packet to trigger this vulnerability.

A memory corruption vulnerability exists in the HTTP Server Host header parsing functionality of Weston Embedded uC-HTTP v3.01.01. A specially crafted network packet can lead to code execution. An attacker can send a malicious packet to trigger this vulnerability.

Forcing the Bluetooth LE stack to segment 'prepare write response' packets can lead to an out-of-bounds memory access.

A memory corruption vulnerability exists in the HTTP Server header parsing functionality of Weston Embedded uC-HTTP v3.01.01. Specially crafted network packets can lead to code execution. An attacker can send a malicious packet to trigger this vulnerability.

A memory corruption vulnerability exists in the HTTP Server form boundary functionality of Weston Embedded uC-HTTP v3.01.01. A specially crafted network packet can lead to code execution. An attacker can send a malicious packet to trigger this vulnerability.

A heap-based buffer overflow vulnerability exists in the HTTP Server functionality of Weston Embedded uC-HTTP v3.01.01. A specially crafted set of network packets can lead to arbitrary code execution. An attacker can send a malicious packet to trigger this vulnerability.

A vulnerability in SiLabs Z/IP Gateway 7.18.01 and earlier allows an authenticated attacker within Z-Wave range to manipulate an array pointer to disclose the contents of global memory.

Multiple buffer overflow vulnerabilities in SiLabs Z/IP Gateway SDK version 7.18.01 and earlier allow an attacker with invasive physical access to a Z-Wave controller device to overwrite global memory and potentially execute arbitrary code.

An integer overflow in Silicon Labs Gecko Bootloader version 4.3.1 and earlier allows unbounded memory access when reading from or writing to storage slots.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D7800 before 1.0.1.30, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.24, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.54, and WNDR4500v3 before 1.0.0.54.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.67, D6000 before 1.0.0.67, D7800 before 1.0.1.30, EX2700 before 1.0.1.28, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.24, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WN2000RPTv3 before 1.0.1.20, WN3000RPv3 before 1.0.2.50, WN3100RPv2 before 1.0.0.56, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects EX2700 before 1.0.1.28, R7800 before 1.0.2.40, WN2000RPTv3 before 1.0.1.20, WN3000RPv3 before 1.0.2.50, and WN3100RPv2 before 1.0.0.56.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D7800 before 1.0.1.30, EX2700 before 1.0.1.28, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.24, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WN2000RPTv3 before 1.0.1.20, WN3000RPv3 before 1.0.2.50, WN3100RPv2 before 1.0.0.56, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D7800 before 1.0.1.30, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.24, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D8500 before 1.0.3.42, EX3700 before 1.0.0.70, EX3800 before 1.0.0.70, EX6000 before 1.0.0.30, EX6100 before 1.0.2.24, EX6120 before 1.0.0.40, EX6130 before 1.0.0.22, EX6150 before 1.0.0.42, EX6200 before 1.0.3.88, EX7000 before 1.0.0.66, R6250 before 1.0.4.26, R6300-2CXNAS before 1.0.3.60, R6300v2 before 1.0.4.28, R6400 before 1.0.1.36, R6400v2 before 1.0.2.52, R6700 before 1.0.1.46, R6900 before 1.0.1.46, R7000 before 1.0.9.28, R7000P before 1.3.1.44, R6900P before 1.3.1.44, R7100LG before 1.0.0.46, R7300 before 1.0.0.68, R7900 before 1.0.2.10, R8000 before 1.0.4.18, R8000P before 1.3.0.10, R7900P before 1.3.0.10, R8500 before 1.0.2.122, R8300 before 1.0.2.122, RBW30 before 2.1.2.6, WN2500RPv2 before 1.0.0.54, and WNR3500Lv2 before 1.2.0.56.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects R6100 before 1.0.1.20, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

gpsd versions 2.90 to 3.17 and microjson versions 1.0 to 1.3, an open source project, allow a stack-based buffer overflow, which may allow remote attackers to execute arbitrary code on embedded platforms via traffic on Port 2947/TCP or crafted JSON inputs.

The Broadcom wl WiFi driver is vulnerable to a heap buffer overflow. If the vendor information element data length is larger than 164 bytes, a heap buffer overflow is triggered in wlc_wpa_plumb_gtk. In the worst case scenario, by sending specially-crafted WiFi packets, a remote, unauthenticated attacker may be able to execute arbitrary code on a vulnerable system. More typically, this vulnerability will result in denial-of-service conditions.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Synology DiskStation Manager. Authentication is not required to exploit this vulnerablity. The specific flaw exists within the processing of DSI structures in Netatalk. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-12326.

The Broadcom wl WiFi driver is vulnerable to a heap buffer overflow. By supplying a vendor information element with a data length larger than 32 bytes, a heap buffer overflow is triggered in wlc_wpa_sup_eapol. In the worst case scenario, by sending specially-crafted WiFi packets, a remote, unauthenticated attacker may be able to execute arbitrary code on a vulnerable system. More typically, this vulnerability will result in denial-of-service conditions.

In wlan, there is a possible out of bounds write due to a heap buffer overflow. This could lead to remote (proximal/adjacent) escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00461651; Issue ID: MSV-4758.

In Nordic nRF5 SDK for Mesh 5.0, a heap overflow vulnerability can be triggered by sending a series of segmented control packets and access packets with the same SeqAuth

Deep Sea Electronics DSE855 Multipart Boundary Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Deep Sea Electronics DSE855 devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of multipart boundaries. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-23170.

Actiontec WCB6200Q uh_get_postdata_withupload Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Actiontec WCB6200Q routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP server. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the HTTP server. Was ZDI-CAN-21418.

Tenda AC18 V15.03.05.19 was discovered to contain a stack overflow via the funcpara1 parameter in the formSetCfm function.

TRENDnet Wi-Fi routers TEW751DR v1.03 and TEW-752DRU v1.03 were discovered to contain a stack overflow via the function genacgi_main.

There is a Stack overflow Vulnerability in the device Search and Discovery feature of Hikvision Access Control Products. If exploited, an attacker on the same local area network (LAN) could cause the device to malfunction by sending specially crafted packets to an unpatched device.