In Eclipse Jetty, versions 9.2.x and older, 9.3.x (all configurations), and 9.4.x (non-default configuration with RFC2616 compliance enabled), transfer-encoding chunks are handled poorly. The chunk length parsing was vulnerable to an integer overflow. Thus a large chunk size could be interpreted as a smaller chunk size and content sent as chunk body could be interpreted as a pipelined request. If Jetty was deployed behind an intermediary that imposed some authorization and that intermediary allowed arbitrarily large chunks to be passed on unchanged, then this flaw could be used to bypass the authorization imposed by the intermediary as the fake pipelined request would not be interpreted by the intermediary as a request.

Eclipse CycloneDDS versions prior to 0.8.0 improperly handle invalid structures, which may allow an attacker to write arbitrary values in the XML parser.

In Eclipse JGit versions 7.2.0.202503040940-r and older, the ManifestParser class used by the repo command and the AmazonS3 class used to implement the experimental amazons3 git transport protocol allowing to store git pack files in an Amazon S3 bucket, are vulnerable to XML External Entity (XXE) attacks when parsing XML files. This vulnerability can lead to information disclosure, denial of service, and other security issues.

In Eclipse Mosquitto, from version 1.3.2 through 2.0.18, if a malicious broker sends a crafted SUBACK packet with no reason codes, a client using libmosquitto may make out of bounds memory access when acting in its on_subscribe callback. This affects the mosquitto_sub and mosquitto_rr clients.

Eclipse Target Management: Terminal and Remote System Explorer (RSE) version <= 4.5.400 has a remote code execution vulnerability that does not require authentication. The fixed version is included in Eclipse IDE 2024-03

In Eclipse OpenJ9 versions up to 0.51, when used with OpenJDK version 8 a stack based buffer overflow can be caused by modifying a file on disk that is read when the JVM starts.

Git before 1.8.5.6, 1.9.x before 1.9.5, 2.0.x before 2.0.5, 2.1.x before 2.1.4, and 2.2.x before 2.2.1 on Windows and OS X; Mercurial before 3.2.3 on Windows and OS X; Apple Xcode before 6.2 beta 3; mine all versions before 08-12-2014; libgit2 all versions up to 0.21.2; Egit all versions before 08-12-2014; and JGit all versions before 08-12-2014 allow remote Git servers to execute arbitrary commands via a tree containing a crafted .git/config file with (1) an ignorable Unicode codepoint, (2) a git~1/config representation, or (3) mixed case that is improperly handled on a case-insensitive filesystem.

In Eclipse Jetty Server, versions 9.2.x and older, 9.3.x (all non HTTP/1.x configurations), and 9.4.x (all HTTP/1.x configurations), when presented with two content-lengths headers, Jetty ignored the second. When presented with a content-length and a chunked encoding header, the content-length was ignored (as per RFC 2616). If an intermediary decided on the shorter length, but still passed on the longer body, then body content could be interpreted by Jetty as a pipelined request. If the intermediary was imposing authorization, the fake pipelined request would bypass that authorization.

In Eclipse GlassFish version 7.0.16 or earlier it is possible to perform Login Brute Force attacks as there is no limitation in the number of failed login attempts.

In Eclipse GlassFish since version 6.2.5 it is possible to perform a Server Side Request Forgery attack in specific endpoints.

In Eclipse Glassfish 5 or 6, running with old versions of JDK (lower than 6u211, or < 7u201, or < 8u191), allows remote attackers to load malicious code on the server via access to insecure ORB listeners.

In Eclipse RAP versions from 3.0.0 up to and including 3.25.0, Remote Code Execution is possible on Windows when using the FileUpload component. The reason for this is a not completely secure extraction of the file name in the FileUploadProcessor.stripFileName(String name) method. As soon as this finds a / in the path, everything before it is removed, but potentially \ (backslashes) coming further back are kept. For example, a file name such as /..\..\webapps\shell.war can be used to upload a file to a Tomcat server under Windows, which is then saved as ..\..\webapps\shell.war in its webapps directory and can then be executed.

In Eclipse Vert.x 3.4.x up to 3.9.4, 4.0.0.milestone1, 4.0.0.milestone2, 4.0.0.milestone3, 4.0.0.milestone4, 4.0.0.milestone5, 4.0.0.Beta1, 4.0.0.Beta2, and 4.0.0.Beta3, StaticHandler doesn't correctly processes back slashes on Windows Operating systems, allowing, escape the webroot folder to the current working directory.

Eclipse Leshan is a device management server and client Java implementation. In affected versions DDFFileParser` and `DefaultDDFFileValidator` (and so `ObjectLoader`) are vulnerable to `XXE Attacks`. A DDF file is a LWM2M format used to store LWM2M object description. Leshan users are impacted only if they parse untrusted DDF files (e.g. if they let external users provide their own model), in that case they MUST upgrade to fixed version. If you parse only trusted DDF file and validate only with trusted xml schema, upgrading is not mandatory. This issue has been fixed in versions 1.5.0 and 2.0.0-M13. Users are advised to upgrade. There are no known workarounds for this vulnerability.

In versions prior to 1.1 of the Eclipse Paho MQTT C Client, the client does not check rem_len size in readpacket.

In Eclipse Openj9 before version 0.29.0, the JVM does not throw IllegalAccessError for MethodHandles that invoke inaccessible interface methods.

Eclipse CycloneDDS versions prior to 0.8.0 are vulnerable to a write-what-where condition, which may allow an attacker to write arbitrary values in the XML parser.

In Eclipse BIRT versions 4.8.0 and earlier, an attacker can use query parameters to create a JSP file which is accessible from remote (current BIRT viewer dir) to inject JSP code into the running instance.

In Eclipse Theia 0.1.1 to 0.2.0, it is possible to exploit the default build to obtain remote code execution (and XXE) via the theia-xml-extension. This extension uses lsp4xml (recently renamed to LemMinX) in order to provide language support for XML. This is installed by default.

Hudson (aka org.jvnet.hudson.main:hudson-core) before 3.3.2 allows XXE attacks.

In Eclipse OpenJ9 up to and including version 0.23, there is potential for a stack-based buffer overflow when the virtual machine or JNI natives are converting from UTF-8 characters to platform encoding.

In Eclipse ThreadX before 6.4.0, xQueueCreate() and xQueueCreateSet() functions from the FreeRTOS compatibility API (utility/rtos_compatibility_layers/FreeRTOS/tx_freertos.c) were missing parameter checks. This could lead to integer wraparound, under-allocations and heap buffer overflows.

In Eclipse OpenJ9 versions up to 0.47, the JNI function GetStringUTFLength may return an incorrect value which has wrapped around. From 0.48 the value is correct but may be truncated to include a smaller number of characters.

In Eclipse Openj9 before version 0.38.0, in the implementation of the shared cache (which is enabled by default in OpenJ9 builds) the size of a string is not properly checked against the size of the buffer.

Eclipse Jetty provides a web server and servlet container. In versions 11.0.0 through 11.0.15, 10.0.0 through 10.0.15, and 9.0.0 through 9.4.52, an integer overflow in `MetaDataBuilder.checkSize` allows for HTTP/2 HPACK header values to exceed their size limit. `MetaDataBuilder.java` determines if a header name or value exceeds the size limit, and throws an exception if the limit is exceeded. However, when length is very large and huffman is true, the multiplication by 4 in line 295 will overflow, and length will become negative. `(_size+length)` will now be negative, and the check on line 296 will not be triggered. Furthermore, `MetaDataBuilder.checkSize` allows for user-entered HPACK header value sizes to be negative, potentially leading to a very large buffer allocation later on when the user-entered size is multiplied by 2. This means that if a user provides a negative length value (or, more precisely, a length value which, when multiplied by the 4/3 fudge factor, is negative), and this length value is a very large positive number when multiplied by 2, then the user can cause a very large buffer to be allocated on the server. Users of HTTP/2 can be impacted by a remote denial of service attack. The issue has been fixed in versions 11.0.16, 10.0.16, and 9.4.53. There are no known workarounds.

Buffer overflow in system firmware for EDK II may allow unauthenticated user to potentially enable escalation of privilege and/or denial of service via network access.

Multiple integer overflows in the MDSS driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allow attackers to cause a denial of service or possibly have unspecified other impact via a large size value, related to mdss_compat_utils.c, mdss_fb.c, and mdss_rotator.c.

Integer overflow in sshd in OpenSSH 2.9.9 through 3.3 allows remote attackers to execute arbitrary code during challenge response authentication (ChallengeResponseAuthentication) when OpenSSH is using SKEY or BSD_AUTH authentication.

An integer overflow vulnerability exists in the DICOM parse_dicom_meta_info functionality of Accusoft ImageGear 19.9. A specially crafted malformed file can lead to a stack-based buffer overflow. An attacker can provide a malicious file to trigger this vulnerability.

A stack buffer overflow vulnerability has been reported to affect QNAP device running QVR Elite, QVR Pro, QVR Guard. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QVR Elite, QVR Pro, QVR Guard: QuTS hero h5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QuTS hero h4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 4.5.4: QVR Guard 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Guard 2.1.3.0 (2021/12/06) and later

In handle_app_cur_val_response of dtif_rc.cc, there is a possible stack buffer overflow due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

A write-what-where condition in hermes caused by an integer overflow, prior to commit 5b6255ae049fa4641791e47fad994e8e8c4da374 allows attackers to potentially execute arbitrary code via crafted JavaScript. Note that this is only exploitable if the application using Hermes permits evaluation of untrusted JavaScript. Hence, most React Native applications are not affected.

A heap-based buffer overflow vulnerability exists in the XML Decompression DecodeTreeBlock functionality of AT&T Labs Xmill 0.7. Within `DecodeTreeBlock` which is called during the decompression of an XMI file, a UINT32 is loaded from the file and used as trusted input as the length of a buffer. An attacker can provide a malicious file to trigger this vulnerability.

FreeRDP prior to version 2.0.0-rc4 contains a Heap-Based Buffer Overflow in function zgfx_decompress_segment() that results in a memory corruption and probably even a remote code execution.

The dechunk filter in PHP 5.3 through 5.3.2, when decoding an HTTP chunked encoding stream, allows context-dependent attackers to cause a denial of service (crash) and possibly trigger memory corruption via a negative chunk size, which bypasses a signed comparison, related to an integer overflow in the chunk size decoder.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Integer overflow in the str_pad function in ext/standard/string.c in PHP before 7.0.4 allows remote attackers to cause a denial of service or possibly have unspecified other impact via a long string, leading to a heap-based buffer overflow.

A stack buffer overflow vulnerability has been reported to affect QNAP device running QVR Elite, QVR Pro, QVR Guard. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QVR Elite, QVR Pro, QVR Guard: QuTS hero h5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QuTS hero h4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 4.5.4: QVR Guard 2.1.3.0 and later QTS 5.0.0: QVR Guard 2.1.3.0 and later

FreeRDP prior to version 2.0.0-rc4 contains a Heap-Based Buffer Overflow in function zgfx_decompress() that results in a memory corruption and probably even a remote code execution.

FreeRDP prior to version 2.0.0-rc4 contains an Integer Overflow that leads to a Heap-Based Buffer Overflow in function gdi_Bitmap_Decompress() and results in a memory corruption and probably even a remote code execution.

Buffer overflow in pngpread.c in libpng before 1.2.44 and 1.4.x before 1.4.3, as used in progressive applications, might allow remote attackers to execute arbitrary code via a PNG image that triggers an additional data row.

rdesktop versions up to and including v1.8.3 contain an Integer Overflow that leads to an Out-Of-Bounds Write in function process_bitmap_updates() and results in a memory corruption and possibly even a remote code execution.

A stack buffer overflow vulnerability has been reported to affect QNAP device running QVR Elite, QVR Pro, QVR Guard. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QVR Elite, QVR Pro, QVR Guard: QuTS hero h5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QuTS hero h4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 4.5.4: QVR Guard 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Guard 2.1.3.0 (2021/12/06) and later

overkill has buffer overflow via long player names that can corrupt data on the server machine

Multiple vulnerabilities in the web-based user interface of certain Cisco Small Business Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges on an affected device. These vulnerabilities are due to improper validation of requests that are sent to the web interface. For more information about these vulnerabilities, see the Details section of this advisory.