Certain NETGEAR devices are affected by disclosure of sensitive information. This affects RBK352 before 4.4.0.10, RBR350 before 4.4.0.10, and RBS350 before 4.4.0.10.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects RBK50 before 2.7.3.22, RBR50 before 2.7.3.22, and RBS50 before 2.7.3.22.

A vulnerability was detected in D-Link DIR-803 up to 1.04. Impacted is an unknown function of the file /getcfg.php of the component Configuration Handler. The manipulation of the argument AUTHORIZED_GROUP results in information disclosure. The attack may be performed from remote. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects EX6100v2 before 1.0.1.106, EX6150v2 before 1.0.1.106, EX6250 before 1.0.0.146, EX6400 before 1.0.2.164, EX6400v2 before 1.0.0.146, EX6410 before 1.0.0.146, EX6420 before 1.0.0.146, EX7300 before 1.0.2.164, EX7300v2 before 1.0.0.146, EX7320 before 1.0.0.146, EX7700 before 1.0.0.222, LBR1020 before 2.6.5.16, LBR20 before 2.6.5.2, RBK352 before 4.3.4.7, RBK50 before 2.7.3.22, RBR350 before 4.3.4.7, RBR50 before 2.7.3.22, and RBS350 before 4.3.4.7.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects EAX80 before 1.0.1.62, EX7000 before 1.0.1.104, R6120 before 1.0.0.76, R6220 before 1.1.0.110, R6230 before 1.1.0.110, R6260 before 1.1.0.78, R6850 before 1.1.0.78, R6350 before 1.1.0.78, R6330 before 1.1.0.78, R6800 before 1.2.0.76, R6900v2 before 1.2.0.76, R6700v2 before 1.2.0.76, R7000 before 1.0.11.116, R6900P before 1.3.3.140, R7000P before 1.3.3.140, R7200 before 1.2.0.76, R7350 before 1.2.0.76, R7400 before 1.2.0.76, R7450 before 1.2.0.76, AC2100 before 1.2.0.76, AC2400 before 1.2.0.76, AC2600 before 1.2.0.76, R7900 before 1.0.4.38, R7960P before 1.4.1.66, R8000 before 1.0.4.68, R7900P before 1.4.1.66, R8000P before 1.4.1.66, RAX15 before 1.0.2.82, RAX20 before 1.0.2.82, RAX200 before 1.0.3.106, RAX45 before 1.0.2.72, RAX50 before 1.0.2.72, RAX75 before 1.0.3.106, and RAX80 before 1.0.3.106.

In Brave Desktop 1.17 through 1.33 before 1.33.106, when CNAME-based adblocking and a proxying extension with a SOCKS fallback are enabled, additional DNS requests are issued outside of the proxying extension using the system's DNS settings, resulting in information disclosure. NOTE: this issue exists because of an incomplete fix for CVE-2021-21323 and CVE-2021-22916.

A vulnerability was determined in Tenda AC9 15.03.05.14_multi. Affected by this vulnerability is an unknown functionality of the file /cgi-bin/DownloadCfg.jpg of the component Configuration File Handler. This manipulation causes information disclosure. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized.

Yordam Library Information Document Automation product before version 19.02 has an unauthenticated Information disclosure vulnerability.

A vulnerability was found in SourceCodester Earnings and Expense Tracker App 1.0. It has been classified as problematic. This affects an unknown part of the file index.php. The manipulation of the argument page leads to information disclosure. It is possible to initiate the attack remotely. The identifier VDB-224997 was assigned to this vulnerability.

Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects RAX35 before 1.0.4.102, RAX38 before 1.0.4.102, and RAX40 before 1.0.4.102.

A vulnerability classified as problematic has been found in Ortus Solutions ColdBox Elixir 3.1.6. This affects an unknown part of the file src/defaultConfig.js of the component ENV Variable Handler. The manipulation leads to information disclosure. Upgrading to version 3.1.7 is able to address this issue. The identifier of the patch is a3aa62daea2e44c76d08d1eac63768cd928cd69e. It is recommended to upgrade the affected component. The identifier VDB-244485 was assigned to this vulnerability.

A vulnerability has been found in what3words Autosuggest Plugin up to 4.0.0 on WordPress and classified as problematic. Affected by this vulnerability is the function enqueue_scripts of the file w3w-autosuggest/public/class-w3w-autosuggest-public.php of the component Setting Handler. The manipulation leads to information disclosure. The attack can be launched remotely. Upgrading to version 4.0.1 is able to address this issue. The patch is named dd59cbac5f86057d6a73b87007c08b8bfa0c32ac. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-234247.

Emerson Dixell XWEB-500 products are affected by information disclosure via directory listing. A potential attacker can use this misconfiguration to access all the files in the remote directories. Note: the product has not been supported since 2018 and should be removed or replaced

TOTOLINK EX1200T V4.1.2cu.5215 contains an information disclosure vulnerability where an attacker can get the apmib configuration file without authorization, and usernames and passwords can be found in the decoded file.

There is Sensitive Information in Cloudera Manager before 5.4.6 Diagnostic Support Bundles.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol component of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to retrieve memory contents, which could lead to the disclosure of confidential information. The vulnerability is due to insufficient condition checks in the part of the code that handles CAPWAP keepalive requests. An attacker could exploit this vulnerability by sending a crafted CAPWAP keepalive packet to a vulnerable Cisco WLC device. A successful exploit could allow the attacker to retrieve the contents of device memory, which could lead to the disclosure of confidential information.

There is a Information Disclosure vulnerability in anjuta/plugins/document-manager/anjuta-bookmarks.c. This issue was caused by the incorrect use of libxml2 API. The vendor forgot to call 'g_free()' to release the return value of 'xmlGetProp()'.

There are two Information Disclosure vulnerabilities in colord, and they lie in colord/src/cd-device-db.c and colord/src/cd-profile-db.c separately. They exist because the 'err_msg' of 'sqlite3_exec' is not releasing after use, while libxml2 emphasizes that the caller needs to release it.

Grafana Agent is a telemetry collector for sending metrics, logs, and trace data to the opinionated Grafana observability stack. Prior to versions 0.20.1 and 0.21.2, inline secrets defined within a metrics instance config are exposed in plaintext over two endpoints: metrics instance configs defined in the base YAML file are exposed at `/-/config` and metrics instance configs defined for the scraping service are exposed at `/agent/api/v1/configs/:key`. Inline secrets will be exposed to anyone being able to reach these endpoints. If HTTPS with client authentication is not configured, these endpoints are accessible to unauthenticated users. Secrets found in these sections are used for delivering metrics to a Prometheus Remote Write system, authenticating against a system for discovering Prometheus targets, and authenticating against a system for collecting metrics. This does not apply for non-inlined secrets, such as `*_file` based secrets. This issue is patched in Grafana Agent versions 0.20.1 and 0.21.2. A few workarounds are available. Users who cannot upgrade should use non-inline secrets where possible. Users may also desire to restrict API access to Grafana Agent with some combination of restricting the network interfaces Grafana Agent listens on through `http_listen_address` in the `server` block, configuring Grafana Agent to use HTTPS with client authentication, and/or using firewall rules to restrict external access to Grafana Agent's API.

Docker CLI is the command line interface for the docker container runtime. A bug was found in the Docker CLI where running `docker login my-private-registry.example.com` with a misconfigured configuration file (typically `~/.docker/config.json`) listing a `credsStore` or `credHelpers` that could not be executed would result in any provided credentials being sent to `registry-1.docker.io` rather than the intended private registry. This bug has been fixed in Docker CLI 20.10.9. Users should update to this version as soon as possible. For users unable to update ensure that any configured credsStore or credHelpers entries in the configuration file reference an installed credential helper that is executable and on the PATH.

sylius/paypal-plugin is a paypal plugin for the Sylius development platform. In affected versions the URL to the payment page done after checkout was created with autoincremented payment id (/pay-with-paypal/{id}) and therefore it was easy to predict. The problem is that the Credit card form has prefilled "credit card holder" field with the Customer's first and last name and hence this can lead to personally identifiable information exposure. Additionally, the mentioned form did not require authentication. The problem has been patched in Sylius/PayPalPlugin 1.2.4 and 1.3.1. If users are unable to update they can override a sylius_paypal_plugin_pay_with_paypal_form route and change its URL parameters to (for example) {orderToken}/{paymentId}, then override the Sylius\PayPalPlugin\Controller\PayWithPayPalFormAction service, to operate on the payment taken from the repository by these 2 values. It would also require usage of custom repository method. Additionally, one could override the @SyliusPayPalPlugin/payWithPaypal.html.twig template, to add contingencies: ['SCA_ALWAYS'] line in hostedFields.submit(...) function call (line 421). It would then have to be handled in the function callback.

Vulnerability in the Oracle Agile PLM product of Oracle Supply Chain (component: User and User Group). The supported version that is affected is 9.3.6. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Agile PLM. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Agile PLM accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N).

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.7, an attacker can perform a SIP digest leak attack against FreeSWITCH and receive the challenge response of a gateway configured on the FreeSWITCH server. This is done by challenging FreeSWITCH's SIP requests with the realm set to that of the gateway, thus forcing FreeSWITCH to respond with the challenge response which is based on the password of that targeted gateway. Abuse of this vulnerability allows attackers to potentially recover gateway passwords by performing a fast offline password cracking attack on the challenge response. The attacker does not require special network privileges, such as the ability to sniff the FreeSWITCH's network traffic, to exploit this issue. Instead, what is required for this attack to work is the ability to cause the victim server to send SIP request messages to the malicious party. Additionally, to exploit this issue, the attacker needs to specify the correct realm which might in some cases be considered secret. However, because many gateways are actually public, this information can easily be retrieved. The vulnerability appears to be due to the code which handles challenges in `sofia_reg.c`, `sofia_reg_handle_sip_r_challenge()` which does not check if the challenge is originating from the actual gateway. The lack of these checks allows arbitrary UACs (and gateways) to challenge any request sent by FreeSWITCH with the realm of the gateway being targeted. This issue is patched in version 10.10.7. Maintainers recommend that one should create an association between a SIP session for each gateway and its realm to make a check be put into place for this association when responding to challenges.

Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to version 4.10.4, for regular (non-LiveQuery) queries, the session token is removed from the response, but for LiveQuery payloads it is currently not. If a user has a LiveQuery subscription on the `Parse.User` class, all session tokens created during user sign-ups will be broadcast as part of the LiveQuery payload. A patch in version 4.10.4 removes session tokens from the LiveQuery payload. As a workaround, set `user.acl(new Parse.ACL())` in a beforeSave trigger to make the user private already on sign-up.

The OneClick Chat to Order plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 1.0.8 via the 'wa_order_thank_you_override' function due to missing validation on a user controlled key. This makes it possible for unauthenticated attackers to view sensitive customer information including names, email addresses, phone numbers, billing/shipping addresses, order contents, and payment methods by simply changing the order ID in the URL.

MyHuawei-App has a Exposure of Sensitive Information to an Unauthorized Actor vulnerability.Successful exploitation of this vulnerability could compromise confidentiality.

Information Exposure vulnerability in Hitachi Energy LinkOne application, due to a misconfiguration in the ASP server exposes server and ASP.net information, an attacker that manages to exploit this vulnerability can use the exposed information as a reconnaissance for further exploitation. This issue affects: Hitachi Energy LinkOne 3.20; 3.22; 3.23; 3.24; 3.25; 3.26.

A flaw exists in tang, a network-based cryptographic binding server, which could result in leak of private keys.

In the WeChat application 8.0.10 for Android and iOS, a mini program can obtain sensitive information from a user's address book via wx.searchContacts.

Directory Traversal vulnerability in ComposioHQ v.0.7.20 allows a remote attacker to obtain sensitive information via the _download_file_or_dir function.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in EFM-Networks, Inc. IpTIME T5008, EFM-Networks, Inc. IpTIME AX2004M, EFM-Networks, Inc. IpTIME AX3000Q, EFM-Networks, Inc. IpTIME AX6000M allows Authentication Bypass.This issue affects ipTIME T5008: through 15.26.8; ipTIME AX2004M: through 15.26.8; ipTIME AX3000Q: through 15.26.8; ipTIME AX6000M: through 15.26.8.

Keyfactor AWS Orchestrator through 2.0 allows Information Disclosure.

Successful exploitation of this vulnerability could allow an unauthorized user to access sensitive data.

Arbitrary file has a Exposure of Sensitive Information to an Unauthorized Actor vulnerability .Successful exploitation of this vulnerability may cause confidentiality is affected.

The routes (aka Extbase Yaml Routes) extension before 2.1.1 for TYPO3, when CsrfTokenViewHelper is used, allows Sensitive Information Disclosure because a session identifier is unsafely present in HTML output.

There is a Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability will cause the confidentiality of users is affected.

Password autocomplete vulnerability in the web application password field of Hitachi ABB Power Grids eSOMS allows attacker to gain access to user credentials that are stored by the browser. This issue affects: Hitachi ABB Power Grids eSOMS version 6.3 and prior versions.

The Quiz Maker plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 6.7.0.80. This is due to the plugin exposing quiz answers through the ays_quiz_check_answer AJAX action without proper authorization checks. The endpoint only validates a nonce, but that same nonce is publicly available to all site visitors via the quiz_maker_ajax_public localized script data. This makes it possible for unauthenticated attackers to extract sensitive data including quiz answers for any quiz question.

Travel support program is a rails app to support the travel support program of openSUSE (TSP). Sensitive user data (bank account details, password Hash) can be extracted via Ransack query injection. Every deployment of travel-support-program below the patched version is affected. The travel-support-program uses the Ransack library to implement search functionality. In its default configuration, Ransack will allow for query conditions based on properties of associated database objects [1]. The `*_start`, `*_end` or `*_cont` search matchers [2] can then be abused to exfiltrate sensitive string values of associated database objects via character-by-character brute-force (A match is indicated by the returned JSON not being empty). A single bank account number can be extracted with <200 requests, a password hash can be extracted with ~1200 requests, all within a few minutes. The problem has been patched in commit d22916275c51500b4004933ff1b0a69bc807b2b7. In order to work around this issue, you can also cherry pick that patch, however it will not work without the Rails 5.0 migration that was done in #150, which in turn had quite a few pull requests it depended on.

Exposure of sensitive information to an unauthorized actor in Xbox allows an unauthorized attacker to disclose information over a network.

An issue was discovered in mcp-neo4j 0.3.0 allowing attackers to obtain sensitive information or execute arbitrary commands via the SSE service. NOTE: the Supplier's position is that authentication is not mandatory for MCP servers, and the mcp-neo4j MCP server is only intended for use in a local environment where authentication realistically would not be needed. Also, the Supplier provides middleware to help isolate the MCP server from external access (if needed).

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Pinot. This issue affects Apache Pinot: from 0.1 before 1.0.0. Users are recommended to upgrade to version 1.0.0 and configure RBAC, which fixes the issue. Details:  When using a request to path “/appconfigs” to the controller, it can lead to the disclosure of sensitive information such as system information (e.g. arch, os version), environment information (e.g. maxHeapSize) and Pinot configurations (e.g. zookeeper path). This issue was addressed by the Role-based Access Control https://docs.pinot.apache.org/operators/tutorials/authentication/basic-auth-access-control , so that /appConfigs` and all other APIs can be access controlled. Only authorized users have access to it. Note the user needs to add the admin role accordingly to the RBAC guide to control access to this endpoint, and in the future version of Pinot, a default admin role is planned to be added.

Certain HP LaserJet Pro printers may be vulnerable to information disclosure leading to credential exposure by altering the scan/send destination address and/or modifying the LDAP Server.

YOSHOP 2.0 allows unauthenticated information disclosure via comment-list API endpoints in the Goods module. The Comment model eagerly loads the related User model without field filtering; because User.php defines no $hidden or $visible attributes, sensitive fields (bcrypt password hash, mobile number, pay_money, expend_money.) are exposed in JSON responses. Route names vary per deployment (e.g. /api/goods.pinglun/list), but all call the same vulnerable model logic.

Exposure of sensitive information to an unauthorized actor in Microsoft Office Plus allows an unauthorized attacker to perform spoofing over a network.

In Bender/ebee Charge Controllers in multiple versions are prone to an RFID leak. The RFID of the last charge event can be read without authentication via the web interface.

An issue discovered in Yuneec Mantis Q and PX4-Autopilot v 1.11.3 and below allow attacker to gain access to sensitive information via various nuttx commands.

Gatsby is a framework for building websites. The gatsby-source-wordpress plugin prior to versions 4.0.8 and 5.9.2 leaks .htaccess HTTP Basic Authentication variables into the app.js bundle during build-time. Users who are not initializing basic authentication credentials in the gatsby-config.js are not affected. A patch has been introduced in gatsby-source-wordpress@4.0.8 and gatsby-source-wordpress@5.9.2 which mitigates the issue by filtering all variables specified in the `auth: { }` section. Users that depend on this functionality are advised to upgrade to the latest release of gatsby-source-wordpress, run `gatsby clean` followed by a `gatsby build`. One may manually edit the app.js file post-build as a workaround.

Shopware is an open source eCommerce platform. Versions prior to 6.3.5.1 may leak of information via Store-API. The vulnerability could only be fixed by changing the API system, which involves a non-backward-compatible change. Only consumers of the Store-API should be affected by this change. We recommend to update to the current version 6.3.5.1. You can get the update to 6.3.5.1 regularly via the Auto-Updater or directly via the download overview. https://www.shopware.com/en/download/#shopware-6 The vulnerability could only be fixed by changing the API system, which involves a non-backward-compatible change. Only consumers of the Store-API should be affected by this change. Please check your plugins if you have it in use. Detailed technical information can be found in the upgrade information. https://github.com/shopware/platform/blob/v6.3.5.1/UPGRADE-6.3.md#6351 ### Workarounds For older versions of 6.1 and 6.2, corresponding security measures are also available via a plugin. For the full range of functions, we recommend updating to the latest Shopware version. https://store.shopware.com/en/detail/index/sArticle/518463/number/Swag136939272659 ### For more information https://docs.shopware.com/en/shopware-6-en/security-updates/security-update-02-2021

A flaw was found in tripleo-ansible version as shipped in Red Hat Openstack 16.1. The Ansible log file is readable to all users during stack update and creation. The highest threat from this vulnerability is to data confidentiality.