A vulnerability in the egress packet processing functionality of the Cisco StarOS operating system for Cisco Aggregation Services Router (ASR) 5700 Series devices and Virtualized Packet Core (VPC) System Software could allow an unauthenticated, remote attacker to cause an interface on the device to cease forwarding packets. The device may need to be manually reloaded to clear this Interface Forwarding Denial of Service condition. The vulnerability is due to the failure to properly check that the length of a packet to transmit does not exceed the maximum supported length of the network interface card (NIC). An attacker could exploit this vulnerability by sending a crafted IP packet or a series of crafted IP fragments through an interface on the targeted device. A successful exploit could allow the attacker to cause the network interface to cease forwarding packets. This vulnerability could be triggered by either IPv4 or IPv6 network traffic. This vulnerability affects the following Cisco products when they are running the StarOS operating system and a virtual interface card is installed on the device: Aggregation Services Router (ASR) 5700 Series, Virtualized Packet Core-Distributed Instance (VPC-DI) System Software, Virtualized Packet Core-Single Instance (VPC-SI) System Software. Cisco Bug IDs: CSCvf32385.

A vulnerability was discovered in GitLab versions before 13.1.10, 13.2.8 and 13.3.4. GitLab Webhook feature could be abused to perform denial of service attacks due to the lack of rate limitation.

An issue was discovered in FIS GT.M through V7.0-000 (related to the YottaDB code base). Using crafted input, an attacker can control the size of a memset that occurs in calls to util_format in sr_unix/util_output.c.

Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier may consume excessive amounts of memory when processing HTTP/1.1 headers with long field names or requests with long URLs.

A vulnerability in the file descriptor handling of Cisco TelePresence Video Communication Server (VCS) Expressway could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to exhaustion of file descriptors while processing a high volume of traffic. An attacker could exploit this vulnerability by establishing a high number of concurrent TCP connections to the vulnerable system. An exploit could allow the attacker to cause a restart in a specific process, resulting in a temporary interruption of service. Cisco Bug IDs: CSCvh77056, CSCvh77058, CSCvh95264.

cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. Prior to 0.23.0, incoming requests using Transfer-Encoding: chunked in the header can allocate memory arbitrarily in the server, potentially leading to its exhaustion. This vulnerability is fixed in 0.23.0. NOTE: This vulnerability is related to CVE-2025-53628.

MediaWiki before 1.36.2 allows a denial of service (resource consumption because of lengthy query processing time). ApiQueryBacklinks (action=query&list=backlinks) can cause a full table scan.

An issue was discovered in Pillow before 10.0.0. It is a Denial of Service that uncontrollably allocates memory to process a given task, potentially causing a service to crash by having it run out of memory. This occurs for truetype in ImageFont when textlength in an ImageDraw instance operates on a long text argument.

snappy-java is a Java port of the snappy, a fast C++ compresser/decompresser developed by Google. The SnappyInputStream was found to be vulnerable to Denial of Service (DoS) attacks when decompressing data with a too large chunk size. Due to missing upper bound check on chunk length, an unrecoverable fatal error can occur. All versions of snappy-java including the latest released version 1.1.10.3 are vulnerable to this issue. A fix has been introduced in commit `9f8c3cf74` which will be included in the 1.1.10.4 release. Users are advised to upgrade. Users unable to upgrade should only accept compressed data from trusted sources.

Allocation of resources for multipart headers with insufficient limits enabled a DoS vulnerability in Apache Commons FileUpload. This issue affects Apache Commons FileUpload: from 1.0 before 1.6; from 2.0.0-M1 before 2.0.0-M4. Users are recommended to upgrade to versions 1.6 or 2.0.0-M4, which fix the issue.

modern-async is an open source JavaScript tooling library for asynchronous operations using async/await and promises. In affected versions a bug affecting two of the functions in this library: forEachSeries and forEachLimit. They should limit the concurrency of some actions but, in practice, they don't. Any code calling these functions will be written thinking they would limit the concurrency but they won't. This could lead to potential security issues in other projects. The problem has been patched in 1.0.4. There is no workaround.

Redis is an open source, in-memory database that persists on disk. An unauthenticated connection can cause repeated IP protocol errors, leading to client starvation and, ultimately, a denial of service. This vulnerability is fixed in 8.0.3, 7.4.5, 7.2.10, and 6.2.19.

Pion Interceptor is a framework for building RTP/RTCP communication software. Versions v0.1.36 through v0.1.38 contain a bug in a RTP packet factory that can be exploited to trigger a panic with Pion based SFU via crafted RTP packets, This only affect users that use pion/interceptor. Users should upgrade to v0.1.39 or later, which validates that: `padLen > 0 && padLen <= payloadLength` and return error on overflow, avoiding panic. If upgrading is not possible, apply the patch from the pull request manually or drop packets whose P-bit is set but whose padLen is zero or larger than the remaining payload.

In Bento4 1.6.0-638, there is an allocator is out of memory in the function AP4_Array<AP4_TrunAtom::Entry>::EnsureCapacity in Ap4Array.h:172, as demonstrated by GPAC. This can cause a denial of service (DOS).

Multiple Cisco products are affected by a vulnerability in the way the Snort detection engine processes ICMP traffic that could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper memory resource management while the Snort detection engine is processing ICMP packets. An attacker could exploit this vulnerability by sending a series of ICMP packets through an affected device. A successful exploit could allow the attacker to exhaust resources on the affected device, causing the device to reload.

Tornado is a Python web framework and asynchronous networking library. When Tornado's ``multipart/form-data`` parser encounters certain errors, it logs a warning but continues trying to parse the remainder of the data. This allows remote attackers to generate an extremely high volume of logs, constituting a DoS attack. This DoS is compounded by the fact that the logging subsystem is synchronous. All versions of Tornado prior to 6.5.0 are affected. The vulnerable parser is enabled by default. Upgrade to Tornado version 6.50 to receive a patch. As a workaround, risk can be mitigated by blocking `Content-Type: multipart/form-data` in a proxy.

Rack is a modular Ruby web server interface. Prior to versions 2.2.14, 3.0.16, and 3.1.14, `Rack::QueryParser` parses query strings and `application/x-www-form-urlencoded` bodies into Ruby data structures without imposing any limit on the number of parameters, allowing attackers to send requests with extremely large numbers of parameters. The vulnerability arises because `Rack::QueryParser` iterates over each `&`-separated key-value pair and adds it to a Hash without enforcing an upper bound on the total number of parameters. This allows an attacker to send a single request containing hundreds of thousands (or more) of parameters, which consumes excessive memory and CPU during parsing. An attacker can trigger denial of service by sending specifically crafted HTTP requests, which can cause memory exhaustion or pin CPU resources, stalling or crashing the Rack server. This results in full service disruption until the affected worker is restarted. Versions 2.2.14, 3.0.16, and 3.1.14 fix the issue. Some other mitigations are available. One may use middleware to enforce a maximum query string size or parameter count, or employ a reverse proxy (such as Nginx) to limit request sizes and reject oversized query strings or bodies. Limiting request body sizes and query string lengths at the web server or CDN level is an effective mitigation.

plone.rest allows users to use HTTP verbs such as GET, POST, PUT, DELETE, etc. in Plone. Starting in the 2.x branch and prior to versions 2.0.1 and 3.0.1, when the `++api++` traverser is accidentally used multiple times in a url, handling it takes increasingly longer, making the server less responsive. Patches are available in `plone.rest` 2.0.1 and 3.0.1. Series 1.x is not affected. As a workaround, one may redirect `/++api++/++api++` to `/++api++` in one's frontend web server (nginx, Apache).

Firebird is a relational database. Versions 4.0.0 through 4.0.3 and version 5.0 beta1 are vulnerable to a server crash when a user uses a specific form of SET BIND statement. Any non-privileged user with minimum access to a server may type a statement with a long `CHAR` length, which causes the server to crash due to stack corruption. Versions 4.0.4.2981 and 5.0.0.117 contain fixes for this issue. No known workarounds are available.

Allocation of Resources Without Limits or Throttling vulnerability in Drupal Events Log Track allows Excessive Allocation.This issue affects Events Log Track: from 0.0.0 before 3.1.11, from 4.0.0 before 4.0.2.

The ZlibDecoders in Netty 4.1.x before 4.1.46 allow for unbounded memory allocation while decoding a ZlibEncoded byte stream. An attacker could send a large ZlibEncoded byte stream to the Netty server, forcing the server to allocate all of its free memory to a single decoder.

In Node.js including 6.x before 6.17.0, 8.x before 8.15.1, 10.x before 10.15.2, and 11.x before 11.10.1, an attacker can cause a Denial of Service (DoS) by establishing an HTTP or HTTPS connection in keep-alive mode and by sending headers very slowly. This keeps the connection and associated resources alive for a long period of time. Potential attacks are mitigated by the use of a load balancer or other proxy layer. This vulnerability is an extension of CVE-2018-12121, addressed in November and impacts all active Node.js release lines including 6.x before 6.17.0, 8.x before 8.15.1, 10.x before 10.15.2, and 11.x before 11.10.1.

When TCP Verified Accept is enabled on a TCP profile that is configured on a Virtual Server, undisclosed requests can cause an increase in memory resource utilization.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

An adversary could crash the entire device by sending a large quantity of ICMP requests if the controller has the built-in web server enabled but does not have the built-in web server completely set up and configured for the SNAP PAC S1 Firmware version R10.3b

In Netgear RAX30 V1.0.10.94_3, the USERLIMIT_GLOBAL option is set to 0 in multiple bftpd-related configuration files. This can cause DoS attacks when unlimited users are connected.

A memory allocation with excessive size value vulnerability in the license verification function of FortiPortal before 6.0.6 may allow an attacker to perform a denial of service attack via specially crafted license blobs.

An adversary could cause a continuous restart loop to the entire device by sending a large quantity of HTTP GET requests if the controller has the built-in web server enabled but does not have the built-in web server completely set up and configured for the SNAP PAC S1 Firmware version R10.3b

An issue has been discovered in GitLab EE affecting all versions from 15.11 prior to 16.2.2 which allows an attacker to spike the resource consumption resulting in DoS.

go-libp2p is the Go implementation of the libp2p Networking Stack. Prior to versions 0.27.8, 0.28.2, and 0.29.1 malicious peer can use large RSA keys to run a resource exhaustion attack & force a node to spend time doing signature verification of the large key. This vulnerability is present in the core/crypto module of go-libp2p and can occur during the Noise handshake and the libp2p x509 extension verification step. To prevent this attack, go-libp2p versions 0.27.8, 0.28.2, and 0.29.1 restrict RSA keys to <= 8192 bits. To protect one's application, it is necessary to update to these patch releases and to use the updated Go compiler in 1.20.7 or 1.19.12. There are no known workarounds for this issue.

Allocation of Resources Without Limits or Throttling vulnerability in Hitachi Ops Center Common Services on Linux allows DoS.This issue affects Hitachi Ops Center Common Services: before 10.9.3-00.

A malicious HTTP/2 client which rapidly creates requests and immediately resets them can cause excessive server resource consumption. While the total number of requests is bounded by the http2.Server.MaxConcurrentStreams setting, resetting an in-progress request allows the attacker to create a new request while the existing one is still executing. With the fix applied, HTTP/2 servers now bound the number of simultaneously executing handler goroutines to the stream concurrency limit (MaxConcurrentStreams). New requests arriving when at the limit (which can only happen after the client has reset an existing, in-flight request) will be queued until a handler exits. If the request queue grows too large, the server will terminate the connection. This issue is also fixed in golang.org/x/net/http2 for users manually configuring HTTP/2. The default stream concurrency limit is 250 streams (requests) per HTTP/2 connection. This value may be adjusted using the golang.org/x/net/http2 package; see the Server.MaxConcurrentStreams setting and the ConfigureServer function.

QUIC connections do not set an upper bound on the amount of data buffered when reading post-handshake messages, allowing a malicious QUIC connection to cause unbounded memory growth. With fix, connections now consistently reject messages larger than 65KiB in size.

A vulnerability has been found in WEKA INTEREST Security Scanner up to 1.8 and classified as problematic. This vulnerability affects unknown code of the component Portscan. The manipulation with an unknown input leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

In archive/zip in Go before 1.16.8 and 1.17.x before 1.17.1, a crafted archive header (falsely designating that many files are present) can cause a NewReader or OpenReader panic. NOTE: this issue exists because of an incomplete fix for CVE-2021-33196.

Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Prior to versions 0.5.7, 0.4.20, 0.3.9, and 0.2.5, there is a possibility for denial of service by memory exhaustion when net-imap reads server responses. At any time while the client is connected, a malicious server can send can send a "literal" byte count, which is automatically read by the client's receiver thread. The response reader immediately allocates memory for the number of bytes indicated by the server response. This should not be an issue when securely connecting to trusted IMAP servers that are well-behaved. It can affect insecure connections and buggy, untrusted, or compromised servers (for example, connecting to a user supplied hostname). This issue has been patched in versions 0.5.7, 0.4.20, 0.3.9, and 0.2.5.

On Crestron 3-Series Control Systems before 1.8001.0187, crafting and sending a specific BACnet packet can cause a crash.

When curl retrieves an HTTP response, it stores the incoming headers so that they can be accessed later via the libcurl headers API. However, curl did not have a limit in how many or how large headers it would accept in a response, allowing a malicious server to stream an endless series of headers and eventually cause curl to run out of heap memory.

go-libp2p is the offical libp2p implementation in the Go programming language. Version `0.18.0` and older of go-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limits has been part of go-libp2p, this component was designed to handle the regular churn of peers, not a targeted resource exhaustion attack. Users are advised to upgrade their version of go-libp2p to version `0.18.1` or newer. Users unable to upgrade may consult the denial of service (dos) mitigation page for more information on how to incorporate mitigation strategies, monitor your application, and respond to attacks.

A vulnerability has been identified in SIMATIC MV540 H (All versions < V3.3.4), SIMATIC MV540 S (All versions < V3.3.4), SIMATIC MV550 H (All versions < V3.3.4), SIMATIC MV550 S (All versions < V3.3.4), SIMATIC MV560 U (All versions < V3.3.4), SIMATIC MV560 X (All versions < V3.3.4). The result synchronization server of the affected products contains a vulnerability that may lead to a denial of service condition. An attacker may cause a denial of service situation of all socket-based communication of the affected products if the result server is enabled.

An issue in the cs_bind_ubat component of MonetDB Server v11.45.17 and v11.46.0 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements.

An issue in the BLOBcmp component of MonetDB Server v11.45.17 and v11.46.0 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements.

Products.CMFCore are the key framework services for the Zope Content Management Framework (CMF). The use of Python's marshal module to handle unchecked input in a public method on `PortalFolder` objects can lead to an unauthenticated denial of service and crash situation. The code in question is exposed by all portal software built on top of `Products.CMFCore`, such as Plone. All deployments are vulnerable. The code has been fixed in `Products.CMFCore` version 3.2.

An issue in the list_append component of MonetDB Server v11.45.17 and v11.46.0 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements.

Faktory is a language-agnostic persistent background job server. Prior to version 1.8.0, the Faktory web dashboard can suffer from denial of service by a crafted malicious url query param `days`. The vulnerability is related to how the backend reads the `days` URL query parameter in the Faktory web dashboard. The value is used directly without any checks to create a string slice. If a very large value is provided, the backend server ends up using a significant amount of memory and causing it to crash. Version 1.8.0 fixes this issue.

Mastodon is a free, open-source social network server based on ActivityPub. When performing outgoing HTTP queries, Mastodon sets a timeout on individual read operations. Prior to versions 3.5.9, 4.0.5, and 4.1.3, a malicious server can indefinitely extend the duration of the response through slowloris-type attacks. This vulnerability can be used to keep all Mastodon workers busy for an extended duration of time, leading to the server becoming unresponsive. Versions 3.5.9, 4.0.5, and 4.1.3 contain a patch for this issue.

An issue in the gc_col component of MonetDB Server v11.45.17 and v11.46.0 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements.

An issue in the GDKfree component of MonetDB Server v11.45.17 and v11.46.0 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements.

An issue in the log_create_delta component of MonetDB Server v11.45.17 and v11.46.0 allows attackers to cause Denial of Service (DoS) via crafted SQL statements.

Allocation of Resources Without Limits or Throttling vulnerability in Apache Software Foundation Apache Struts.This issue affects Apache Struts: through 2.5.30, through 6.1.2. Upgrade to Struts 2.5.31 or 6.1.2.1 or greater

snappy-java is a fast compressor/decompressor for Java. Due to use of an unchecked chunk length, an unrecoverable fatal error can occur in versions prior to 1.1.10.1. The code in the function hasNextChunk in the fileSnappyInputStream.java checks if a given stream has more chunks to read. It does that by attempting to read 4 bytes. If it wasn’t possible to read the 4 bytes, the function returns false. Otherwise, if 4 bytes were available, the code treats them as the length of the next chunk. In the case that the `compressed` variable is null, a byte array is allocated with the size given by the input data. Since the code doesn’t test the legality of the `chunkSize` variable, it is possible to pass a negative number (such as 0xFFFFFFFF which is -1), which will cause the code to raise a `java.lang.NegativeArraySizeException` exception. A worse case would happen when passing a huge positive value (such as 0x7FFFFFFF), which would raise the fatal `java.lang.OutOfMemoryError` error. Version 1.1.10.1 contains a patch for this issue.