A Denial of Service vulnerability exists in FFmpeg 4.2 due to a memory leak in the wtvfile_open_sector function in wtvdec.c.

A Denial of Service vulnerability exists in FFmpeg 4.2 due to a memory leak in the av_buffersrc_add_frame_flags function in buffersrc.

A Denial of Service vulnerability exists in FFmpeg 4.2 due to a memory leak is affected by: memory leak in the link_filter_inouts function in libavfilter/graphparser.c.

A Denial of Service vulnerability exists in FFmpeg 4.2 due to a memory leak in avcodec_alloc_context3 at options.c.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix kernel crash during resume Currently during resume, QMI target memory is not properly handled, resulting in kernel crash in case DMA remap is not supported: BUG: Bad page state in process kworker/u16:54 pfn:36e80 page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80 page dumped because: nonzero _refcount Call Trace: bad_page free_page_is_bad_report __free_pages_ok __free_pages dma_direct_free dma_free_attrs ath12k_qmi_free_target_mem_chunk ath12k_qmi_msg_mem_request_cb The reason is: Once ath12k module is loaded, firmware sends memory request to host. In case DMA remap not supported, ath12k refuses the first request due to failure in allocating with large segment size: ath12k_pci 0000:04:00.0: qmi firmware request memory request ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144 ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size ath12k_pci 0000:04:00.0: qmi delays mem_request 2 ath12k_pci 0000:04:00.0: qmi firmware request memory request Later firmware comes back with more but small segments and allocation succeeds: ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 Now ath12k is working. If suspend is triggered, firmware will be reloaded during resume. As same as before, firmware requests two large segments at first. In ath12k_qmi_msg_mem_request_cb() segment count and size are assigned: ab->qmi.mem_seg_count == 2 ab->qmi.target_mem[0].size == 7077888 ab->qmi.target_mem[1].size == 8454144 Then allocation failed like before and ath12k_qmi_free_target_mem_chunk() is called to free all allocated segments. Note the first segment is skipped because its v.addr is cleared due to allocation failure: chunk->v.addr = dma_alloc_coherent() Also note that this leaks that segment because it has not been freed. While freeing the second segment, a size of 8454144 is passed to dma_free_coherent(). However remember that this segment is allocated at the first time firmware is loaded, before suspend. So its real size is 524288, much smaller than 8454144. As a result kernel found we are freeing some memory which is in use and thus cras ---truncated---

A Denial of Service vulnerability exists in FFmpeg 4.2 due to a memory leak in the url_open_dyn_buf_internal function in libavformat/aviobuf.c.

A Denial of Service vulnerability exists in FFmpeg 4.2 due to a memory leak in the avpriv_float_dsp_allocl function in libavutil/float_dsp.c.

A Denial of Service vulnerability exists in FFmpeg 4.2 due to a memory leak in the ff_frame_pool_get function in framepool.c.

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix memory leak in audio daemon attach operation Audio PD daemon send the name as part of the init IOCTL call. This name needs to be copied to kernel for which memory is allocated. This memory is never freed which might result in memory leak. Free the memory when it is not needed.

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix memory leak in nfs4_set_security_label We leak nfs_fattr and nfs4_label every time we set a security xattr.

In the Linux kernel, the following vulnerability has been resolved: media: i2c: et8ek8: Don't strip remove function when driver is builtin Using __exit for the remove function results in the remove callback being discarded with CONFIG_VIDEO_ET8EK8=y. When such a device gets unbound (e.g. using sysfs or hotplug), the driver is just removed without the cleanup being performed. This results in resource leaks. Fix it by compiling in the remove callback unconditionally. This also fixes a W=1 modpost warning: WARNING: modpost: drivers/media/i2c/et8ek8/et8ek8: section mismatch in reference: et8ek8_i2c_driver+0x10 (section: .data) -> et8ek8_remove (section: .exit.text)

In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations Create subvolume, create snapshot and delete subvolume all use btrfs_subvolume_reserve_metadata() to reserve metadata for the changes done to the parent subvolume's fs tree, which cannot be mediated in the normal way via start_transaction. When quota groups (squota or qgroups) are enabled, this reserves qgroup metadata of type PREALLOC. Once the operation is associated to a transaction, we convert PREALLOC to PERTRANS, which gets cleared in bulk at the end of the transaction. However, the error paths of these three operations were not implementing this lifecycle correctly. They unconditionally converted the PREALLOC to PERTRANS in a generic cleanup step regardless of errors or whether the operation was fully associated to a transaction or not. This resulted in error paths occasionally converting this rsv to PERTRANS without calling record_root_in_trans successfully, which meant that unless that root got recorded in the transaction by some other thread, the end of the transaction would not free that root's PERTRANS, leaking it. Ultimately, this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount for the leaked reservation. The fix is to ensure that every qgroup PREALLOC reservation observes the following properties: 1. any failure before record_root_in_trans is called successfully results in freeing the PREALLOC reservation. 2. after record_root_in_trans, we convert to PERTRANS, and now the transaction owns freeing the reservation. This patch enforces those properties on the three operations. Without it, generic/269 with squotas enabled at mkfs time would fail in ~5-10 runs on my system. With this patch, it ran successfully 1000 times in a row.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix potential memory leakage when reading chip temperature Without this commit, reading chip temperature will cause memory leakage.

The audit system in Linux kernel 2.6.6, and other versions before 2.6.13.4, when CONFIG_AUDITSYSCALL is enabled, uses an incorrect function to free names_cache memory, which prevents the memory from being tracked by AUDITSYSCALL code and leads to a memory leak that allows attackers to cause a denial of service (memory consumption).

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/cs_dsp_ctl: Use private_free for control cleanup Use the control private_free callback to free the associated data block. This ensures that the memory won't leak, whatever way the control gets destroyed. The original implementation didn't actually remove the ALSA controls in hda_cs_dsp_control_remove(). It only freed the internal tracking structure. This meant it was possible to remove/unload the amp driver while leaving its ALSA controls still present in the soundcard. Obviously attempting to access them could cause segfaults or at least dereferencing stale pointers.

By spoofing the target resolver with responses that have a malformed EdDSA signature, an attacker can trigger a small memory leak. It is possible to gradually erode available memory to the point where named crashes for lack of resources.

By spoofing the target resolver with responses that have a malformed ECDSA signature, an attacker can trigger a small memory leak. It is possible to gradually erode available memory to the point where named crashes for lack of resources.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: fix a devres leak in hw_enable upon suspend resume Each time the platform goes to low power, PM suspend / resume routines call: __dwc2_lowlevel_hw_enable -> devm_add_action_or_reset(). This adds a new devres each time. This may also happen at runtime, as dwc2_lowlevel_hw_enable() can be called from udc_start(). This can be seen with tracing: - echo 1 > /sys/kernel/debug/tracing/events/dev/devres_log/enable - go to low power - cat /sys/kernel/debug/tracing/trace A new "ADD" entry is found upon each low power cycle: ... devres_log: 49000000.usb-otg ADD 82a13bba devm_action_release (8 bytes) ... devres_log: 49000000.usb-otg ADD 49889daf devm_action_release (8 bytes) ... A second issue is addressed here: - regulator_bulk_enable() is called upon each PM cycle (suspend/resume). - regulator_bulk_disable() never gets called. So the reference count for these regulators constantly increase, by one upon each low power cycle, due to missing regulator_bulk_disable() call in __dwc2_lowlevel_hw_disable(). The original fix that introduced the devm_add_action_or_reset() call, fixed an issue during probe, that happens due to other errors in dwc2_driver_probe() -> dwc2_core_reset(). Then the probe fails without disabling regulators, when dr_mode == USB_DR_MODE_PERIPHERAL. Rather fix the error path: disable all the low level hardware in the error path, by using the "hsotg->ll_hw_enabled" flag. Checking dr_mode has been introduced to avoid a dual call to dwc2_lowlevel_hw_disable(). "ll_hw_enabled" should achieve the same (and is used currently in the remove() routine).

A vulnerability was found in Linux Kernel. It has been rated as problematic. This issue affects some unknown processing of the file fs/fscache/cookie.c of the component IPsec. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211931.

A vulnerability, which was classified as problematic, has been found in Linux Kernel. This issue affects the function nilfs_attach_log_writer of the file fs/nilfs2/segment.c of the component BPF. The manipulation leads to memory leak. The attack may be initiated remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211961 was assigned to this vulnerability.

A vulnerability has been found in Linux Kernel and classified as problematic. This vulnerability affects the function l2cap_recv_acldata of the file net/bluetooth/l2cap_core.c of the component Bluetooth. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. VDB-211918 is the identifier assigned to this vulnerability.

A vulnerability classified as problematic has been found in Linux Kernel. Affected is the function j1939_session_destroy of the file net/can/j1939/transport.c. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211932.

In the Linux kernel, the following vulnerability has been resolved: qibfs: fix dentry leak simple_recursive_removal() drops the pinning references to all positives in subtree. For the cases when its argument has been kept alive by the pinning alone that's exactly the right thing to do, but here the argument comes from dcache lookup, that needs to be balanced by explicit dput(). Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>

An out-of-bounds memory write flaw was found in the Linux kernel’s Kid-friendly Wired Controller driver. This flaw allows a local user to crash or potentially escalate their privileges on the system. It is in bigben_probe of drivers/hid/hid-bigbenff.c. The reason is incorrect assumption - bigben devices all have inputs. However, malicious devices can break this assumption, leaking to out-of-bound write.

In the Linux kernel, the following vulnerability has been resolved: tipc: fix a possible memleak in tipc_buf_append __skb_linearize() doesn't free the skb when it fails, so move '*buf = NULL' after __skb_linearize(), so that the skb can be freed on the err path.

A vulnerability was found in Linux Kernel. It has been declared as problematic. This vulnerability affects the function vsock_connect of the file net/vmw_vsock/af_vsock.c. The manipulation leads to memory leak. The complexity of an attack is rather high. The exploitation appears to be difficult. It is recommended to apply a patch to fix this issue. VDB-211930 is the identifier assigned to this vulnerability.

In the Linux kernel, the following vulnerability has been resolved: phonet: fix rtm_phonet_notify() skb allocation fill_route() stores three components in the skb: - struct rtmsg - RTA_DST (u8) - RTA_OIF (u32) Therefore, rtm_phonet_notify() should use NLMSG_ALIGN(sizeof(struct rtmsg)) + nla_total_size(1) + nla_total_size(4)

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix memory leak in tpm2_key_encode() 'scratch' is never freed. Fix this by calling kfree() in the success, and in the error case.

In the Linux kernel, the following vulnerability has been resolved: mm/kmemleak: avoid soft lockup in __kmemleak_do_cleanup() A soft lockup warning was observed on a relative small system x86-64 system with 16 GB of memory when running a debug kernel with kmemleak enabled. watchdog: BUG: soft lockup - CPU#8 stuck for 33s! [kworker/8:1:134] The test system was running a workload with hot unplug happening in parallel. Then kemleak decided to disable itself due to its inability to allocate more kmemleak objects. The debug kernel has its CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE set to 40,000. The soft lockup happened in kmemleak_do_cleanup() when the existing kmemleak objects were being removed and deleted one-by-one in a loop via a workqueue. In this particular case, there are at least 40,000 objects that need to be processed and given the slowness of a debug kernel and the fact that a raw_spinlock has to be acquired and released in __delete_object(), it could take a while to properly handle all these objects. As kmemleak has been disabled in this case, the object removal and deletion process can be further optimized as locking isn't really needed. However, it is probably not worth the effort to optimize for such an edge case that should rarely happen. So the simple solution is to call cond_resched() at periodic interval in the iteration loop to avoid soft lockup.

A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function ipv6_renew_options of the component IPv6 Handler. The manipulation leads to memory leak. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211021 was assigned to this vulnerability.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: free old damon_sysfs_scheme_filter->memcg_path on write memcg_path_store() assigns a newly allocated memory buffer to filter->memcg_path, without deallocating the previously allocated and assigned memory buffer. As a result, users can leak kernel memory by continuously writing a data to memcg_path DAMOS sysfs file. Fix the leak by deallocating the previously set memory buffer.

In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix Rx DMA datasize and skb_over_panic mana_get_rxbuf_cfg() aligns the RX buffer's DMA datasize to be multiple of 64. So a packet slightly bigger than mtu+14, say 1536, can be received and cause skb_over_panic. Sample dmesg: [ 5325.237162] skbuff: skb_over_panic: text:ffffffffc043277a len:1536 put:1536 head:ff1100018b517000 data:ff1100018b517100 tail:0x700 end:0x6ea dev:<NULL> [ 5325.243689] ------------[ cut here ]------------ [ 5325.245748] kernel BUG at net/core/skbuff.c:192! [ 5325.247838] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 5325.258374] RIP: 0010:skb_panic+0x4f/0x60 [ 5325.302941] Call Trace: [ 5325.304389] <IRQ> [ 5325.315794] ? skb_panic+0x4f/0x60 [ 5325.317457] ? asm_exc_invalid_op+0x1f/0x30 [ 5325.319490] ? skb_panic+0x4f/0x60 [ 5325.321161] skb_put+0x4e/0x50 [ 5325.322670] mana_poll+0x6fa/0xb50 [mana] [ 5325.324578] __napi_poll+0x33/0x1e0 [ 5325.326328] net_rx_action+0x12e/0x280 As discussed internally, this alignment is not necessary. To fix this bug, remove it from the code. So oversized packets will be marked as CQE_RX_TRUNCATED by NIC, and dropped.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix kmemleak warning for percpu hashmap Vlad Poenaru reported the following kmemleak issue: unreferenced object 0x606fd7c44ac8 (size 32): backtrace (crc 0): pcpu_alloc_noprof+0x730/0xeb0 bpf_map_alloc_percpu+0x69/0xc0 prealloc_init+0x9d/0x1b0 htab_map_alloc+0x363/0x510 map_create+0x215/0x3a0 __sys_bpf+0x16b/0x3e0 __x64_sys_bpf+0x18/0x20 do_syscall_64+0x7b/0x150 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Further investigation shows the reason is due to not 8-byte aligned store of percpu pointer in htab_elem_set_ptr(): *(void __percpu **)(l->key + key_size) = pptr; Note that the whole htab_elem alignment is 8 (for x86_64). If the key_size is 4, that means pptr is stored in a location which is 4 byte aligned but not 8 byte aligned. In mm/kmemleak.c, scan_block() scans the memory based on 8 byte stride, so it won't detect above pptr, hence reporting the memory leak. In htab_map_alloc(), we already have htab->elem_size = sizeof(struct htab_elem) + round_up(htab->map.key_size, 8); if (percpu) htab->elem_size += sizeof(void *); else htab->elem_size += round_up(htab->map.value_size, 8); So storing pptr with 8-byte alignment won't cause any problem and can fix kmemleak too. The issue can be reproduced with bpf selftest as well: 1. Enable CONFIG_DEBUG_KMEMLEAK config 2. Add a getchar() before skel destroy in test_hash_map() in prog_tests/for_each.c. The purpose is to keep map available so kmemleak can be detected. 3. run './test_progs -t for_each/hash_map &' and a kmemleak should be reported.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA This dma_alloc_coherent() is undone neither in the remove function, nor in the error handling path of fsl_qdma_probe(). Switch to the managed version to fix both issues.

A vulnerability classified as problematic was found in Linux Kernel. This vulnerability affects the function macvlan_handle_frame of the file drivers/net/macvlan.c of the component skb. The manipulation leads to memory leak. The attack can be initiated remotely. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211024.

In the Linux kernel, the following vulnerability has been resolved: virtio-net: free xsk_buffs on error in virtnet_xsk_pool_enable() The selftests added to our CI by Bui Quang Minh recently reveals that there is a mem leak on the error path of virtnet_xsk_pool_enable(): unreferenced object 0xffff88800a68a000 (size 2048): comm "xdp_helper", pid 318, jiffies 4294692778 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 0): __kvmalloc_node_noprof+0x402/0x570 virtnet_xsk_pool_enable+0x293/0x6a0 (drivers/net/virtio_net.c:5882) xp_assign_dev+0x369/0x670 (net/xdp/xsk_buff_pool.c:226) xsk_bind+0x6a5/0x1ae0 __sys_bind+0x15e/0x230 __x64_sys_bind+0x72/0xb0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: staging: fbtft: fix potential memory leak in fbtft_framebuffer_alloc() In the error paths after fb_info structure is successfully allocated, the memory allocated in fb_deferred_io_init() for info->pagerefs is not freed. Fix that by adding the cleanup function on the error path.

In the Linux kernel, the following vulnerability has been resolved: net: lan743x: Fix memleak issue when GSO enabled Always map the `skb` to the LS descriptor. Previously skb was mapped to EXT descriptor when the number of fragments is zero with GSO enabled. Mapping the skb to EXT descriptor prevents it from being freed, leading to a memory leak

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix potential sta-link leak When a station is allocated, links are added but not set to valid yet (e.g. during connection to an AP MLD), we might remove the station without ever marking links valid, and leak them. Fix that.

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd937x: fix a potential memory leak in wcd937x_soc_codec_probe() When snd_soc_dapm_new_controls() or snd_soc_dapm_add_routes() fails, wcd937x_soc_codec_probe() returns without releasing 'wcd937x->clsh_info', which is allocated by wcd_clsh_ctrl_alloc. Add wcd_clsh_ctrl_free() to prevent potential memory leak.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix another leak in the submit error path put_unused_fd() doesn't free the installed file, if we've already done fd_install(). So we need to also free the sync_file. Patchwork: https://patchwork.freedesktop.org/patch/653583/

In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: fix memory leak when bringing down interface When bringing down the TX rings we flush the rings but forget to reclaimed the flushed packets. This leads to a memory leak since we do not free the dma mapped buffers. This also leads to tx control block corruption when bringing down the interface for power management.

In the Linux kernel, the following vulnerability has been resolved: mtd: spinand: fix memory leak of ECC engine conf Memory allocated for the ECC engine conf is not released during spinand cleanup. Below kmemleak trace is seen for this memory leak: unreferenced object 0xffffff80064f00e0 (size 8): comm "swapper/0", pid 1, jiffies 4294937458 hex dump (first 8 bytes): 00 00 00 00 00 00 00 00 ........ backtrace (crc 0): kmemleak_alloc+0x30/0x40 __kmalloc_cache_noprof+0x208/0x3c0 spinand_ondie_ecc_init_ctx+0x114/0x200 nand_ecc_init_ctx+0x70/0xa8 nanddev_ecc_engine_init+0xec/0x27c spinand_probe+0xa2c/0x1620 spi_mem_probe+0x130/0x21c spi_probe+0xf0/0x170 really_probe+0x17c/0x6e8 __driver_probe_device+0x17c/0x21c driver_probe_device+0x58/0x180 __device_attach_driver+0x15c/0x1f8 bus_for_each_drv+0xec/0x150 __device_attach+0x188/0x24c device_initial_probe+0x10/0x20 bus_probe_device+0x11c/0x160 Fix the leak by calling nanddev_ecc_engine_cleanup() inside spinand_cleanup().

A vulnerability, which was classified as problematic, has been found in X.org Server. Affected by this issue is the function ProcXkbGetKbdByName of the file xkb/xkb.c. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211052.

In the Linux kernel, the following vulnerability has been resolved: of: dynamic: Synchronize of_changeset_destroy() with the devlink removals In the following sequence: 1) of_platform_depopulate() 2) of_overlay_remove() During the step 1, devices are destroyed and devlinks are removed. During the step 2, OF nodes are destroyed but __of_changeset_entry_destroy() can raise warnings related to missing of_node_put(): ERROR: memory leak, expected refcount 1 instead of 2 ... Indeed, during the devlink removals performed at step 1, the removal itself releasing the device (and the attached of_node) is done by a job queued in a workqueue and so, it is done asynchronously with respect to function calls. When the warning is present, of_node_put() will be called but wrongly too late from the workqueue job. In order to be sure that any ongoing devlink removals are done before the of_node destruction, synchronize the of_changeset_destroy() with the devlink removals.

In the Linux kernel, the following vulnerability has been resolved: io_uring/sqpoll: work around a potential audit memory leak kmemleak complains that there's a memory leak related to connect handling: unreferenced object 0xffff0001093bdf00 (size 128): comm "iou-sqp-455", pid 457, jiffies 4294894164 hex dump (first 32 bytes): 02 00 fa ea 7f 00 00 01 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 2e481b1a): [<00000000c0a26af4>] kmemleak_alloc+0x30/0x38 [<000000009c30bb45>] kmalloc_trace+0x228/0x358 [<000000009da9d39f>] __audit_sockaddr+0xd0/0x138 [<0000000089a93e34>] move_addr_to_kernel+0x1a0/0x1f8 [<000000000b4e80e6>] io_connect_prep+0x1ec/0x2d4 [<00000000abfbcd99>] io_submit_sqes+0x588/0x1e48 [<00000000e7c25e07>] io_sq_thread+0x8a4/0x10e4 [<00000000d999b491>] ret_from_fork+0x10/0x20 which can can happen if: 1) The command type does something on the prep side that triggers an audit call. 2) The thread hasn't done any operations before this that triggered an audit call inside ->issue(), where we have audit_uring_entry() and audit_uring_exit(). Work around this by issuing a blanket NOP operation before the SQPOLL does anything.

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix panic when calling skb_linearize The panic can be reproduced by executing the command: ./bench sockmap -c 2 -p 1 -a --rx-verdict-ingress --rx-strp 100000 Then a kernel panic was captured: ''' [ 657.460555] kernel BUG at net/core/skbuff.c:2178! [ 657.462680] Tainted: [W]=WARN [ 657.463287] Workqueue: events sk_psock_backlog ... [ 657.469610] <TASK> [ 657.469738] ? die+0x36/0x90 [ 657.469916] ? do_trap+0x1d0/0x270 [ 657.470118] ? pskb_expand_head+0x612/0xf40 [ 657.470376] ? pskb_expand_head+0x612/0xf40 [ 657.470620] ? do_error_trap+0xa3/0x170 [ 657.470846] ? pskb_expand_head+0x612/0xf40 [ 657.471092] ? handle_invalid_op+0x2c/0x40 [ 657.471335] ? pskb_expand_head+0x612/0xf40 [ 657.471579] ? exc_invalid_op+0x2d/0x40 [ 657.471805] ? asm_exc_invalid_op+0x1a/0x20 [ 657.472052] ? pskb_expand_head+0xd1/0xf40 [ 657.472292] ? pskb_expand_head+0x612/0xf40 [ 657.472540] ? lock_acquire+0x18f/0x4e0 [ 657.472766] ? find_held_lock+0x2d/0x110 [ 657.472999] ? __pfx_pskb_expand_head+0x10/0x10 [ 657.473263] ? __kmalloc_cache_noprof+0x5b/0x470 [ 657.473537] ? __pfx___lock_release.isra.0+0x10/0x10 [ 657.473826] __pskb_pull_tail+0xfd/0x1d20 [ 657.474062] ? __kasan_slab_alloc+0x4e/0x90 [ 657.474707] sk_psock_skb_ingress_enqueue+0x3bf/0x510 [ 657.475392] ? __kasan_kmalloc+0xaa/0xb0 [ 657.476010] sk_psock_backlog+0x5cf/0xd70 [ 657.476637] process_one_work+0x858/0x1a20 ''' The panic originates from the assertion BUG_ON(skb_shared(skb)) in skb_linearize(). A previous commit(see Fixes tag) introduced skb_get() to avoid race conditions between skb operations in the backlog and skb release in the recvmsg path. However, this caused the panic to always occur when skb_linearize is executed. The "--rx-strp 100000" parameter forces the RX path to use the strparser module which aggregates data until it reaches 100KB before calling sockmap logic. The 100KB payload exceeds MAX_MSG_FRAGS, triggering skb_linearize. To fix this issue, just move skb_get into sk_psock_skb_ingress_enqueue. ''' sk_psock_backlog: sk_psock_handle_skb skb_get(skb) <== we move it into 'sk_psock_skb_ingress_enqueue' sk_psock_skb_ingress____________ ↓ | | → sk_psock_skb_ingress_self | sk_psock_skb_ingress_enqueue sk_psock_verdict_apply_________________↑ skb_linearize ''' Note that for verdict_apply path, the skb_get operation is unnecessary so we add 'take_ref' param to control it's behavior.