In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: Fix crash on isr after kexec() If the system is rebooted via isr(), the IRQ handler might be triggered before the domain is initialized. Resulting on an invalid memory access error. Fix: [ 0.500930] Unable to handle kernel read from unreadable memory at virtual address 0000000000000070 [ 0.501166] Call trace: [ 0.501174] report_iommu_fault+0x28/0xfc [ 0.501180] mtk_iommu_isr+0x10c/0x1c0 [ joro: Fixed spelling in commit message ]

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8712: fix uninit-value in r871xu_drv_init() When 'tmpU1b' returns from r8712_read8(padapter, EE_9346CR) is 0, 'mac[6]' will not be initialized. BUG: KMSAN: uninit-value in r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541 r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396 really_probe+0x653/0x14b0 drivers/base/dd.c:596 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752 driver_probe_device drivers/base/dd.c:782 [inline] __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427 __device_attach+0x593/0x8e0 drivers/base/dd.c:970 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487 device_add+0x1fff/0x26e0 drivers/base/core.c:3405 usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170 usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238 usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293 really_probe+0x653/0x14b0 drivers/base/dd.c:596 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752 driver_probe_device drivers/base/dd.c:782 [inline] __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427 __device_attach+0x593/0x8e0 drivers/base/dd.c:970 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487 device_add+0x1fff/0x26e0 drivers/base/core.c:3405 usb_new_device+0x1b8e/0x2950 drivers/usb/core/hub.c:2566 hub_port_connect drivers/usb/core/hub.c:5358 [inline] hub_port_connect_change drivers/usb/core/hub.c:5502 [inline] port_event drivers/usb/core/hub.c:5660 [inline] hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5742 process_one_work+0xdb6/0x1820 kernel/workqueue.c:2307 worker_thread+0x10b3/0x21e0 kernel/workqueue.c:2454 kthread+0x3c7/0x500 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 Local variable mac created at: r871xu_drv_init+0x1771/0x3070 drivers/staging/rtl8712/usb_intf.c:394 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396 KMSAN: uninit-value in r871xu_drv_init https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8

In the Linux kernel, the following vulnerability has been resolved: clocksource: hyper-v: unexport __init-annotated hv_init_clocksource() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, arch/x86/kernel/cpu/mshyperv.c is never compiled as modular. (CONFIG_HYPERVISOR_GUEST is boolean)

In the Linux kernel, the following vulnerability has been resolved: net: mdio: unexport __init-annotated mdio_bus_init() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, drivers/net/phy/phy_device.c is never compiled as modular. (CONFIG_PHYLIB is boolean)

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix uninit-value in mpol_rebind_policy() mpol_set_nodemask()(mm/mempolicy.c) does not set up nodemask when pol->mode is MPOL_LOCAL. Check pol->mode before access pol->w.cpuset_mems_allowed in mpol_rebind_policy()(mm/mempolicy.c). BUG: KMSAN: uninit-value in mpol_rebind_policy mm/mempolicy.c:352 [inline] BUG: KMSAN: uninit-value in mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368 mpol_rebind_policy mm/mempolicy.c:352 [inline] mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368 cpuset_change_task_nodemask kernel/cgroup/cpuset.c:1711 [inline] cpuset_attach+0x787/0x15e0 kernel/cgroup/cpuset.c:2278 cgroup_migrate_execute+0x1023/0x1d20 kernel/cgroup/cgroup.c:2515 cgroup_migrate kernel/cgroup/cgroup.c:2771 [inline] cgroup_attach_task+0x540/0x8b0 kernel/cgroup/cgroup.c:2804 __cgroup1_procs_write+0x5cc/0x7a0 kernel/cgroup/cgroup-v1.c:520 cgroup1_tasks_write+0x94/0xb0 kernel/cgroup/cgroup-v1.c:539 cgroup_file_write+0x4c2/0x9e0 kernel/cgroup/cgroup.c:3852 kernfs_fop_write_iter+0x66a/0x9f0 fs/kernfs/file.c:296 call_write_iter include/linux/fs.h:2162 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0x1318/0x2030 fs/read_write.c:590 ksys_write+0x28b/0x510 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0xdb/0x120 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] slab_alloc mm/slub.c:3259 [inline] kmem_cache_alloc+0x902/0x11c0 mm/slub.c:3264 mpol_new mm/mempolicy.c:293 [inline] do_set_mempolicy+0x421/0xb70 mm/mempolicy.c:853 kernel_set_mempolicy mm/mempolicy.c:1504 [inline] __do_sys_set_mempolicy mm/mempolicy.c:1510 [inline] __se_sys_set_mempolicy+0x44c/0xb60 mm/mempolicy.c:1507 __x64_sys_set_mempolicy+0xd8/0x110 mm/mempolicy.c:1507 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae KMSAN: uninit-value in mpol_rebind_task (2) https://syzkaller.appspot.com/bug?id=d6eb90f952c2a5de9ea718a1b873c55cb13b59dc This patch seems to fix below bug too. KMSAN: uninit-value in mpol_rebind_mm (2) https://syzkaller.appspot.com/bug?id=f2fecd0d7013f54ec4162f60743a2b28df40926b The uninit-value is pol->w.cpuset_mems_allowed in mpol_rebind_policy(). When syzkaller reproducer runs to the beginning of mpol_new(), mpol_new() mm/mempolicy.c do_mbind() mm/mempolicy.c kernel_mbind() mm/mempolicy.c `mode` is 1(MPOL_PREFERRED), nodes_empty(*nodes) is `true` and `flags` is 0. Then mode = MPOL_LOCAL; ... policy->mode = mode; policy->flags = flags; will be executed. So in mpol_set_nodemask(), mpol_set_nodemask() mm/mempolicy.c do_mbind() kernel_mbind() pol->mode is 4 (MPOL_LOCAL), that `nodemask` in `pol` is not initialized, which will be accessed in mpol_rebind_policy().

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix free of uninitialized nfs4_label on referral lookup. Send along the already-allocated fattr along with nfs4_fs_locations, and drop the memcpy of fattr. We end up growing two more allocations, but this fixes up a crash as: PID: 790 TASK: ffff88811b43c000 CPU: 0 COMMAND: "ls" #0 [ffffc90000857920] panic at ffffffff81b9bfde #1 [ffffc900008579c0] do_trap at ffffffff81023a9b #2 [ffffc90000857a10] do_error_trap at ffffffff81023b78 #3 [ffffc90000857a58] exc_stack_segment at ffffffff81be1f45 #4 [ffffc90000857a80] asm_exc_stack_segment at ffffffff81c009de #5 [ffffc90000857b08] nfs_lookup at ffffffffa0302322 [nfs] #6 [ffffc90000857b70] __lookup_slow at ffffffff813a4a5f #7 [ffffc90000857c60] walk_component at ffffffff813a86c4 #8 [ffffc90000857cb8] path_lookupat at ffffffff813a9553 #9 [ffffc90000857cf0] filename_lookup at ffffffff813ab86b

In the Linux kernel, the following vulnerability has been resolved: Input: iforce - invert valid length check when fetching device IDs syzbot is reporting uninitialized value at iforce_init_device() [1], for commit 6ac0aec6b0a6 ("Input: iforce - allow callers supply data buffer when fetching device IDs") is checking that valid length is shorter than bytes to read. Since iforce_get_id_packet() stores valid length when returning 0, the caller needs to check that valid length is longer than or equals to bytes to read.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix crash when mount with quota enabled There is a reported crash when mounting ocfs2 with quota enabled. RIP: 0010:ocfs2_qinfo_lock_res_init+0x44/0x50 [ocfs2] Call Trace: ocfs2_local_read_info+0xb9/0x6f0 [ocfs2] dquot_load_quota_sb+0x216/0x470 dquot_load_quota_inode+0x85/0x100 ocfs2_enable_quotas+0xa0/0x1c0 [ocfs2] ocfs2_fill_super.cold+0xc8/0x1bf [ocfs2] mount_bdev+0x185/0x1b0 legacy_get_tree+0x27/0x40 vfs_get_tree+0x25/0xb0 path_mount+0x465/0xac0 __x64_sys_mount+0x103/0x140 It is caused by when initializing dqi_gqlock, the corresponding dqi_type and dqi_sb are not properly initialized. This issue is introduced by commit 6c85c2c72819, which wants to avoid accessing uninitialized variables in error cases. So make global quota info properly initialized.

In the Linux kernel, the following vulnerability has been resolved: ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler Currently, the same handler is called for both a NETDEV_BONDING_INFO LAG unlink notification as for a NETDEV_UNREGISTER call. This is causing a problem though, since the netdev_notifier_info passed has a different structure depending on which event is passed. The problem manifests as a call trace from a BUG: KASAN stack-out-of-bounds error. Fix this by creating a handler specific to NETDEV_UNREGISTER that only is passed valid elements in the netdev_notifier_info struct for the NETDEV_UNREGISTER event. Also included is the removal of an unbalanced dev_put on the peer_netdev and related braces.

In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command When control vq receives a VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command request from the driver, presently there is no validation against the number of queue pairs to configure, or even if multiqueue had been negotiated or not is unverified. This may lead to kernel panic due to uninitialized resource for the queues were there any bogus request sent down by untrusted driver. Tie up the loose ends there.

In the Linux kernel, the following vulnerability has been resolved: net: can: j1939: Initialize unused data in j1939_send_one() syzbot reported kernel-infoleak in raw_recvmsg() [1]. j1939_send_one() creates full frame including unused data, but it doesn't initialize it. This causes the kernel-infoleak issue. Fix this by initializing unused data. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 copy_to_iter include/linux/uio.h:196 [inline] memcpy_to_msg include/linux/skbuff.h:4113 [inline] raw_recvmsg+0x2b8/0x9e0 net/can/raw.c:1008 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x2c4/0x340 net/socket.c:1068 ____sys_recvmsg+0x18a/0x620 net/socket.c:2803 ___sys_recvmsg+0x223/0x840 net/socket.c:2845 do_recvmmsg+0x4fc/0xfd0 net/socket.c:2939 __sys_recvmmsg net/socket.c:3018 [inline] __do_sys_recvmmsg net/socket.c:3041 [inline] __se_sys_recvmmsg net/socket.c:3034 [inline] __x64_sys_recvmmsg+0x397/0x490 net/socket.c:3034 x64_sys_call+0xf6c/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:300 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1313 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 sock_alloc_send_skb include/net/sock.h:1842 [inline] j1939_sk_alloc_skb net/can/j1939/socket.c:878 [inline] j1939_sk_send_loop net/can/j1939/socket.c:1142 [inline] j1939_sk_sendmsg+0xc0a/0x2730 net/can/j1939/socket.c:1277 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674 x64_sys_call+0xc4b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Bytes 12-15 of 16 are uninitialized Memory access of size 16 starts at ffff888120969690 Data copied to user address 00000000200017c0 CPU: 1 PID: 5050 Comm: syz-executor198 Not tainted 6.9.0-rc5-syzkaller-00031-g71b1543c83d6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024

In the Linux kernel, the following vulnerability has been resolved: mISDN: hfcpci: Fix warning when deleting uninitialized timer With CONFIG_DEBUG_OBJECTS_TIMERS unloading hfcpci module leads to the following splat: [ 250.215892] ODEBUG: assert_init not available (active state 0) object: ffffffffc01a3dc0 object type: timer_list hint: 0x0 [ 250.217520] WARNING: CPU: 0 PID: 233 at lib/debugobjects.c:612 debug_print_object+0x1b6/0x2c0 [ 250.218775] Modules linked in: hfcpci(-) mISDN_core [ 250.219537] CPU: 0 UID: 0 PID: 233 Comm: rmmod Not tainted 6.17.0-rc2-g6f713187ac98 #2 PREEMPT(voluntary) [ 250.220940] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 250.222377] RIP: 0010:debug_print_object+0x1b6/0x2c0 [ 250.223131] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 4f 41 56 48 8b 14 dd a0 4e 01 9f 48 89 ee 48 c7 c7 20 46 01 9f e8 cb 84d [ 250.225805] RSP: 0018:ffff888015ea7c08 EFLAGS: 00010286 [ 250.226608] RAX: 0000000000000000 RBX: 0000000000000005 RCX: ffffffff9be93a95 [ 250.227708] RDX: 1ffff1100d945138 RSI: 0000000000000008 RDI: ffff88806ca289c0 [ 250.228993] RBP: ffffffff9f014a00 R08: 0000000000000001 R09: ffffed1002bd4f39 [ 250.230043] R10: ffff888015ea79cf R11: 0000000000000001 R12: 0000000000000001 [ 250.231185] R13: ffffffff9eea0520 R14: 0000000000000000 R15: ffff888015ea7cc8 [ 250.232454] FS: 00007f3208f01540(0000) GS:ffff8880caf5a000(0000) knlGS:0000000000000000 [ 250.233851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 250.234856] CR2: 00007f32090a7421 CR3: 0000000004d63000 CR4: 00000000000006f0 [ 250.236117] Call Trace: [ 250.236599] <TASK> [ 250.236967] ? trace_irq_enable.constprop.0+0xd4/0x130 [ 250.237920] debug_object_assert_init+0x1f6/0x310 [ 250.238762] ? __pfx_debug_object_assert_init+0x10/0x10 [ 250.239658] ? __lock_acquire+0xdea/0x1c70 [ 250.240369] __try_to_del_timer_sync+0x69/0x140 [ 250.241172] ? __pfx___try_to_del_timer_sync+0x10/0x10 [ 250.242058] ? __timer_delete_sync+0xc6/0x120 [ 250.242842] ? lock_acquire+0x30/0x80 [ 250.243474] ? __timer_delete_sync+0xc6/0x120 [ 250.244262] __timer_delete_sync+0x98/0x120 [ 250.245015] HFC_cleanup+0x10/0x20 [hfcpci] [ 250.245704] __do_sys_delete_module+0x348/0x510 [ 250.246461] ? __pfx___do_sys_delete_module+0x10/0x10 [ 250.247338] do_syscall_64+0xc1/0x360 [ 250.247924] entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by initializing hfc_tl timer with DEFINE_TIMER macro. Also, use mod_timer instead of manual timeout update.

In the Linux kernel, the following vulnerability has been resolved: arm64: kexec: initialize kexec_buf struct in load_other_segments() Patch series "kexec: Fix invalid field access". The kexec_buf structure was previously declared without initialization. commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly") added a field that is always read but not consistently populated by all architectures. This un-initialized field will contain garbage. This is also triggering a UBSAN warning when the uninitialized data was accessed: ------------[ cut here ]------------ UBSAN: invalid-load in ./include/linux/kexec.h:210:10 load of value 252 is not a valid value for type '_Bool' Zero-initializing kexec_buf at declaration ensures all fields are cleanly set, preventing future instances of uninitialized memory being used. An initial fix was already landed for arm64[0], and this patchset fixes the problem on the remaining arm64 code and on riscv, as raised by Mark. Discussions about this problem could be found at[1][2]. This patch (of 3): The kexec_buf structure was previously declared without initialization. commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly") added a field that is always read but not consistently populated by all architectures. This un-initialized field will contain garbage. This is also triggering a UBSAN warning when the uninitialized data was accessed: ------------[ cut here ]------------ UBSAN: invalid-load in ./include/linux/kexec.h:210:10 load of value 252 is not a valid value for type '_Bool' Zero-initializing kexec_buf at declaration ensures all fields are cleanly set, preventing future instances of uninitialized memory being used.

In the Linux kernel, the following vulnerability has been resolved: iio: accel: sca3300: fix uninitialized iio scan data Fix potential leak of uninitialized stack data to userspace by ensuring that the `channels` array is zeroed before use.

In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Set merge to zero early in af_alg_sendmsg If an error causes af_alg_sendmsg to abort, ctx->merge may contain a garbage value from the previous loop. This may then trigger a crash on the next entry into af_alg_sendmsg when it attempts to do a merge that can't be done. Fix this by setting ctx->merge to zero near the start of the loop.

In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: Fix release of uninitialized resources on error path The commit in the fixes tag made sure that mlx5_vdpa_free() is the single entrypoint for removing the vdpa device resources added in mlx5_vdpa_dev_add(), even in the cleanup path of mlx5_vdpa_dev_add(). This means that all functions from mlx5_vdpa_free() should be able to handle uninitialized resources. This was not the case though: mlx5_vdpa_destroy_mr_resources() and mlx5_cmd_cleanup_async_ctx() were not able to do so. This caused the splat below when adding a vdpa device without a MAC address. This patch fixes these remaining issues: - Makes mlx5_vdpa_destroy_mr_resources() return early if called on uninitialized resources. - Moves mlx5_cmd_init_async_ctx() early on during device addition because it can't fail. This means that mlx5_cmd_cleanup_async_ctx() also can't fail. To mirror this, move the call site of mlx5_cmd_cleanup_async_ctx() in mlx5_vdpa_free(). An additional comment was added in mlx5_vdpa_free() to document the expectations of functions called from this context. Splat: mlx5_core 0000:b5:03.2: mlx5_vdpa_dev_add:3950:(pid 2306) warning: No mac address provisioned? ------------[ cut here ]------------ WARNING: CPU: 13 PID: 2306 at kernel/workqueue.c:4207 __flush_work+0x9a/0xb0 [...] Call Trace: <TASK> ? __try_to_del_timer_sync+0x61/0x90 ? __timer_delete_sync+0x2b/0x40 mlx5_vdpa_destroy_mr_resources+0x1c/0x40 [mlx5_vdpa] mlx5_vdpa_free+0x45/0x160 [mlx5_vdpa] vdpa_release_dev+0x1e/0x50 [vdpa] device_release+0x31/0x90 kobject_cleanup+0x37/0x130 mlx5_vdpa_dev_add+0x327/0x890 [mlx5_vdpa] vdpa_nl_cmd_dev_add_set_doit+0x2c1/0x4d0 [vdpa] genl_family_rcv_msg_doit+0xd8/0x130 genl_family_rcv_msg+0x14b/0x220 ? __pfx_vdpa_nl_cmd_dev_add_set_doit+0x10/0x10 [vdpa] genl_rcv_msg+0x47/0xa0 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x53/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x27b/0x3b0 netlink_sendmsg+0x1f7/0x430 __sys_sendto+0x1fa/0x210 ? ___pte_offset_map+0x17/0x160 ? next_uptodate_folio+0x85/0x2b0 ? percpu_counter_add_batch+0x51/0x90 ? filemap_map_pages+0x515/0x660 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x7b/0x2c0 ? do_read_fault+0x108/0x220 ? do_pte_missing+0x14a/0x3e0 ? __handle_mm_fault+0x321/0x730 ? count_memcg_events+0x13f/0x180 ? handle_mm_fault+0x1fb/0x2d0 ? do_user_addr_fault+0x20c/0x700 ? syscall_exit_work+0x104/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f0c25b0feca [...] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: sctp: initialize more fields in sctp_v6_from_sk() syzbot found that sin6_scope_id was not properly initialized, leading to undefined behavior. Clear sin6_scope_id and sin6_flowinfo. BUG: KMSAN: uninit-value in __sctp_v6_cmp_addr+0x887/0x8c0 net/sctp/ipv6.c:649 __sctp_v6_cmp_addr+0x887/0x8c0 net/sctp/ipv6.c:649 sctp_inet6_cmp_addr+0x4f2/0x510 net/sctp/ipv6.c:983 sctp_bind_addr_conflict+0x22a/0x3b0 net/sctp/bind_addr.c:390 sctp_get_port_local+0x21eb/0x2440 net/sctp/socket.c:8452 sctp_get_port net/sctp/socket.c:8523 [inline] sctp_listen_start net/sctp/socket.c:8567 [inline] sctp_inet_listen+0x710/0xfd0 net/sctp/socket.c:8636 __sys_listen_socket net/socket.c:1912 [inline] __sys_listen net/socket.c:1927 [inline] __do_sys_listen net/socket.c:1932 [inline] __se_sys_listen net/socket.c:1930 [inline] __x64_sys_listen+0x343/0x4c0 net/socket.c:1930 x64_sys_call+0x271d/0x3e20 arch/x86/include/generated/asm/syscalls_64.h:51 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable addr.i.i created at: sctp_get_port net/sctp/socket.c:8515 [inline] sctp_listen_start net/sctp/socket.c:8567 [inline] sctp_inet_listen+0x650/0xfd0 net/sctp/socket.c:8636 __sys_listen_socket net/socket.c:1912 [inline] __sys_listen net/socket.c:1927 [inline] __do_sys_listen net/socket.c:1932 [inline] __se_sys_listen net/socket.c:1930 [inline] __x64_sys_listen+0x343/0x4c0 net/socket.c:1930

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix oops due to uninitialised variable Fix smb3_init_transform_rq() to initialise buffer to NULL before calling netfs_alloc_folioq_buffer() as netfs assumes it can append to the buffer it is given. Setting it to NULL means it should start a fresh buffer, but the value is currently undefined.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported Russell King reports that on the ZII dev rev B, deleting a bridge VLAN from a user port fails with -ENOENT: https://lore.kernel.org/netdev/Z_lQXNP0s5-IiJzd@shell.armlinux.org.uk/ This comes from mv88e6xxx_port_vlan_leave() -> mv88e6xxx_mst_put(), which tries to find an MST entry in &chip->msts associated with the SID, but fails and returns -ENOENT as such. But we know that this chip does not support MST at all, so that is not surprising. The question is why does the guard in mv88e6xxx_mst_put() not exit early: if (!sid) return 0; And the answer seems to be simple: the sid comes from vlan.sid which supposedly was previously populated by mv88e6xxx_vtu_get(). But some chip->info->ops->vtu_getnext() implementations do not populate vlan.sid, for example see mv88e6185_g1_vtu_getnext(). In that case, later in mv88e6xxx_port_vlan_leave() we are using a garbage sid which is just residual stack memory. Testing for sid == 0 covers all cases of a non-bridge VLAN or a bridge VLAN mapped to the default MSTI. For some chips, SID 0 is valid and installed by mv88e6xxx_stu_setup(). A chip which does not support the STU would implicitly only support mapping all VLANs to the default MSTI, so although SID 0 is not valid, it would be sufficient, if we were to zero-initialize the vlan structure, to fix the bug, due to the coincidence that a test for vlan.sid == 0 already exists and leads to the same (correct) behavior. Another option which would be sufficient would be to add a test for mv88e6xxx_has_stu() inside mv88e6xxx_mst_put(), symmetric to the one which already exists in mv88e6xxx_mst_get(). But that placement means the caller will have to dereference vlan.sid, which means it will access uninitialized memory, which is not nice even if it ignores it later. So we end up making both modifications, in order to not rely just on the sid == 0 coincidence, but also to avoid having uninitialized structure fields which might get temporarily accessed.

In the Linux kernel, the following vulnerability has been resolved: ipvs: fix uninit-value for saddr in do_output_route4 syzbot reports for uninit-value for the saddr argument [1]. commit 4754957f04f5 ("ipvs: do not use random local source address for tunnels") already implies that the input value of saddr should be ignored but the code is still reading it which can prevent to connect the route. Fix it by changing the argument to ret_saddr. [1] BUG: KMSAN: uninit-value in do_output_route4+0x42c/0x4d0 net/netfilter/ipvs/ip_vs_xmit.c:147 do_output_route4+0x42c/0x4d0 net/netfilter/ipvs/ip_vs_xmit.c:147 __ip_vs_get_out_rt+0x403/0x21d0 net/netfilter/ipvs/ip_vs_xmit.c:330 ip_vs_tunnel_xmit+0x205/0x2380 net/netfilter/ipvs/ip_vs_xmit.c:1136 ip_vs_in_hook+0x1aa5/0x35b0 net/netfilter/ipvs/ip_vs_core.c:2063 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf7/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] __ip_local_out+0x758/0x7e0 net/ipv4/ip_output.c:118 ip_local_out net/ipv4/ip_output.c:127 [inline] ip_send_skb+0x6a/0x3c0 net/ipv4/ip_output.c:1501 udp_send_skb+0xfda/0x1b70 net/ipv4/udp.c:1195 udp_sendmsg+0x2fe3/0x33c0 net/ipv4/udp.c:1483 inet_sendmsg+0x1fc/0x280 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x267/0x380 net/socket.c:727 ____sys_sendmsg+0x91b/0xda0 net/socket.c:2566 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2620 __sys_sendmmsg+0x41d/0x880 net/socket.c:2702 __compat_sys_sendmmsg net/compat.c:360 [inline] __do_compat_sys_sendmmsg net/compat.c:367 [inline] __se_compat_sys_sendmmsg net/compat.c:364 [inline] __ia32_compat_sys_sendmmsg+0xc8/0x140 net/compat.c:364 ia32_sys_call+0x3ffa/0x41f0 arch/x86/include/generated/asm/syscalls_32.h:346 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] __do_fast_syscall_32+0xb0/0x110 arch/x86/entry/syscall_32.c:306 do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:331 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:369 entry_SYSENTER_compat_after_hwframe+0x84/0x8e Uninit was created at: slab_post_alloc_hook mm/slub.c:4167 [inline] slab_alloc_node mm/slub.c:4210 [inline] __kmalloc_cache_noprof+0x8fa/0xe00 mm/slub.c:4367 kmalloc_noprof include/linux/slab.h:905 [inline] ip_vs_dest_dst_alloc net/netfilter/ipvs/ip_vs_xmit.c:61 [inline] __ip_vs_get_out_rt+0x35d/0x21d0 net/netfilter/ipvs/ip_vs_xmit.c:323 ip_vs_tunnel_xmit+0x205/0x2380 net/netfilter/ipvs/ip_vs_xmit.c:1136 ip_vs_in_hook+0x1aa5/0x35b0 net/netfilter/ipvs/ip_vs_core.c:2063 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf7/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] __ip_local_out+0x758/0x7e0 net/ipv4/ip_output.c:118 ip_local_out net/ipv4/ip_output.c:127 [inline] ip_send_skb+0x6a/0x3c0 net/ipv4/ip_output.c:1501 udp_send_skb+0xfda/0x1b70 net/ipv4/udp.c:1195 udp_sendmsg+0x2fe3/0x33c0 net/ipv4/udp.c:1483 inet_sendmsg+0x1fc/0x280 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x267/0x380 net/socket.c:727 ____sys_sendmsg+0x91b/0xda0 net/socket.c:2566 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2620 __sys_sendmmsg+0x41d/0x880 net/socket.c:2702 __compat_sys_sendmmsg net/compat.c:360 [inline] __do_compat_sys_sendmmsg net/compat.c:367 [inline] __se_compat_sys_sendmmsg net/compat.c:364 [inline] __ia32_compat_sys_sendmmsg+0xc8/0x140 net/compat.c:364 ia32_sys_call+0x3ffa/0x41f0 arch/x86/include/generated/asm/syscalls_32.h:346 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] __do_fast_syscall_32+0xb0/0x110 arch/x86/entry/syscall_32.c:306 do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:331 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:369 entry_SYSENTER_compat_after_hwframe+0x84/0x8e CPU: 0 UID: 0 PID: 22408 Comm: syz.4.5165 Not tainted 6.15.0-rc3-syzkaller-00019-gbc3372351d0c #0 PREEMPT(undef) Hardware name: Google Google Compute Engi ---truncated---

In the Linux kernel, the following vulnerability has been resolved: iio: common: st_sensors: Fix use of uninitialize device structs Throughout the various probe functions &indio_dev->dev is used before it is initialized. This caused a kernel panic in st_sensors_power_enable() when the call to devm_regulator_bulk_get_enable() fails and then calls dev_err_probe() with the uninitialized device. This seems to only cause a panic with dev_err_probe(), dev_err(), dev_warn() and dev_info() don't seem to cause a panic, but are fixed as well. The issue is reported and traced here: [1]

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: account for Ethernet header in nf_flow_pppoe_proto() syzbot found a potential access to uninit-value in nf_flow_pppoe_proto() Blamed commit forgot the Ethernet header. BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x7e4/0x940 net/netfilter/nf_flow_table_inet.c:27 nf_flow_offload_inet_hook+0x7e4/0x940 net/netfilter/nf_flow_table_inet.c:27 nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline] nf_hook_slow+0xe1/0x3d0 net/netfilter/core.c:623 nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline] nf_ingress net/core/dev.c:5742 [inline] __netif_receive_skb_core+0x4aff/0x70c0 net/core/dev.c:5837 __netif_receive_skb_one_core net/core/dev.c:5975 [inline] __netif_receive_skb+0xcc/0xac0 net/core/dev.c:6090 netif_receive_skb_internal net/core/dev.c:6176 [inline] netif_receive_skb+0x57/0x630 net/core/dev.c:6235 tun_rx_batched+0x1df/0x980 drivers/net/tun.c:1485 tun_get_user+0x4ee0/0x6b40 drivers/net/tun.c:1938 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1984 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xb4b/0x1580 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline]

In the Linux kernel, the following vulnerability has been resolved: bpf, ktls: Fix data corruption when using bpf_msg_pop_data() in ktls When sending plaintext data, we initially calculated the corresponding ciphertext length. However, if we later reduced the plaintext data length via socket policy, we failed to recalculate the ciphertext length. This results in transmitting buffers containing uninitialized data during ciphertext transmission. This causes uninitialized bytes to be appended after a complete "Application Data" packet, leading to errors on the receiving end when parsing TLS record.

In the Linux kernel, the following vulnerability has been resolved: libnvdimm/labels: Fix divide error in nd_label_data_init() If a faulty CXL memory device returns a broken zero LSA size in its memory device information (Identify Memory Device (Opcode 4000h), CXL spec. 3.1, 8.2.9.9.1.1), a divide error occurs in the libnvdimm driver: Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:nd_label_data_init+0x10e/0x800 [libnvdimm] Code and flow: 1) CXL Command 4000h returns LSA size = 0 2) config_size is assigned to zero LSA size (CXL pmem driver): drivers/cxl/pmem.c: .config_size = mds->lsa_size, 3) max_xfer is set to zero (nvdimm driver): drivers/nvdimm/label.c: max_xfer = min_t(size_t, ndd->nsarea.max_xfer, config_size); 4) A subsequent DIV_ROUND_UP() causes a division by zero: drivers/nvdimm/label.c: /* Make our initial read size a multiple of max_xfer size */ drivers/nvdimm/label.c: read_size = min(DIV_ROUND_UP(read_size, max_xfer) * max_xfer, drivers/nvdimm/label.c- config_size); Fix this by checking the config size parameter by extending an existing check.

In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: Reorder clock handling and power management in probe Reorder the initialization sequence in `usbhs_probe()` to enable runtime PM before accessing registers, preventing potential crashes due to uninitialized clocks. Currently, in the probe path, registers are accessed before enabling the clocks, leading to a synchronous external abort on the RZ/V2H SoC. The problematic call flow is as follows: usbhs_probe() usbhs_sys_clock_ctrl() usbhs_bset() usbhs_write() iowrite16() <-- Register access before enabling clocks Since `iowrite16()` is performed without ensuring the required clocks are enabled, this can lead to access errors. To fix this, enable PM runtime early in the probe function and ensure clocks are acquired before register access, preventing crashes like the following on RZ/V2H: [13.272640] Internal error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP [13.280814] Modules linked in: cec renesas_usbhs(+) drm_kms_helper fuse drm backlight ipv6 [13.289088] CPU: 1 UID: 0 PID: 195 Comm: (udev-worker) Not tainted 6.14.0-rc7+ #98 [13.296640] Hardware name: Renesas RZ/V2H EVK Board based on r9a09g057h44 (DT) [13.303834] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [13.310770] pc : usbhs_bset+0x14/0x4c [renesas_usbhs] [13.315831] lr : usbhs_probe+0x2e4/0x5ac [renesas_usbhs] [13.321138] sp : ffff8000827e3850 [13.324438] x29: ffff8000827e3860 x28: 0000000000000000 x27: ffff8000827e3ca0 [13.331554] x26: ffff8000827e3ba0 x25: ffff800081729668 x24: 0000000000000025 [13.338670] x23: ffff0000c0f08000 x22: 0000000000000000 x21: ffff0000c0f08010 [13.345783] x20: 0000000000000000 x19: ffff0000c3b52080 x18: 00000000ffffffff [13.352895] x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000827e36ce [13.360009] x14: 00000000000003d7 x13: 00000000000003d7 x12: 0000000000000000 [13.367122] x11: 0000000000000000 x10: 0000000000000aa0 x9 : ffff8000827e3750 [13.374235] x8 : ffff0000c1850b00 x7 : 0000000003826060 x6 : 000000000000001c [13.381347] x5 : 000000030d5fcc00 x4 : ffff8000825c0000 x3 : 0000000000000000 [13.388459] x2 : 0000000000000400 x1 : 0000000000000000 x0 : ffff0000c3b52080 [13.395574] Call trace: [13.398013] usbhs_bset+0x14/0x4c [renesas_usbhs] (P) [13.403076] platform_probe+0x68/0xdc [13.406738] really_probe+0xbc/0x2c0 [13.410306] __driver_probe_device+0x78/0x120 [13.414653] driver_probe_device+0x3c/0x154 [13.418825] __driver_attach+0x90/0x1a0 [13.422647] bus_for_each_dev+0x7c/0xe0 [13.426470] driver_attach+0x24/0x30 [13.430032] bus_add_driver+0xe4/0x208 [13.433766] driver_register+0x68/0x130 [13.437587] __platform_driver_register+0x24/0x30 [13.442273] renesas_usbhs_driver_init+0x20/0x1000 [renesas_usbhs] [13.448450] do_one_initcall+0x60/0x1d4 [13.452276] do_init_module+0x54/0x1f8 [13.456014] load_module+0x1754/0x1c98 [13.459750] init_module_from_file+0x88/0xcc [13.464004] __arm64_sys_finit_module+0x1c4/0x328 [13.468689] invoke_syscall+0x48/0x104 [13.472426] el0_svc_common.constprop.0+0xc0/0xe0 [13.477113] do_el0_svc+0x1c/0x28 [13.480415] el0_svc+0x30/0xcc [13.483460] el0t_64_sync_handler+0x10c/0x138 [13.487800] el0t_64_sync+0x198/0x19c [13.491453] Code: 2a0103e1 12003c42 12003c63 8b010084 (79400084) [13.497522] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: staging: gpib: fix unset padding field copy back to userspace The introduction of a padding field in the gpib_board_info_ioctl is showing up as initialized data on the stack frame being copyied back to userspace in function board_info_ioctl. The simplest fix is to initialize the entire struct to zero to ensure all unassigned padding fields are zero'd before being copied back to userspace.

In the Linux kernel, the following vulnerability has been resolved: pds_core: handle unsupported PDS_CORE_CMD_FW_CONTROL result If the FW doesn't support the PDS_CORE_CMD_FW_CONTROL command the driver might at the least print garbage and at the worst crash when the user runs the "devlink dev info" devlink command. This happens because the stack variable fw_list is not 0 initialized which results in fw_list.num_fw_slots being a garbage value from the stack. Then the driver tries to access fw_list.fw_names[i] with i >= ARRAY_SIZE and runs off the end of the array. Fix this by initializing the fw_list and by not failing completely if the devcmd fails because other useful information is printed via devlink dev info even if the devcmd fails.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix iteration of extrefs during log replay At __inode_add_ref() when processing extrefs, if we jump into the next label we have an undefined value of victim_name.len, since we haven't initialized it before we did the goto. This results in an invalid memory access in the next iteration of the loop since victim_name.len was not initialized to the length of the name of the current extref. Fix this by initializing victim_name.len with the current extref's name length.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack: fix crash due to removal of uninitialised entry A crash in conntrack was reported while trying to unlink the conntrack entry from the hash bucket list: [exception RIP: __nf_ct_delete_from_lists+172] [..] #7 [ff539b5a2b043aa0] nf_ct_delete at ffffffffc124d421 [nf_conntrack] #8 [ff539b5a2b043ad0] nf_ct_gc_expired at ffffffffc124d999 [nf_conntrack] #9 [ff539b5a2b043ae0] __nf_conntrack_find_get at ffffffffc124efbc [nf_conntrack] [..] The nf_conn struct is marked as allocated from slab but appears to be in a partially initialised state: ct hlist pointer is garbage; looks like the ct hash value (hence crash). ct->status is equal to IPS_CONFIRMED|IPS_DYING, which is expected ct->timeout is 30000 (=30s), which is unexpected. Everything else looks like normal udp conntrack entry. If we ignore ct->status and pretend its 0, the entry matches those that are newly allocated but not yet inserted into the hash: - ct hlist pointers are overloaded and store/cache the raw tuple hash - ct->timeout matches the relative time expected for a new udp flow rather than the absolute 'jiffies' value. If it were not for the presence of IPS_CONFIRMED, __nf_conntrack_find_get() would have skipped the entry. Theory is that we did hit following race: cpu x cpu y cpu z found entry E found entry E E is expired <preemption> nf_ct_delete() return E to rcu slab init_conntrack E is re-inited, ct->status set to 0 reply tuplehash hnnode.pprev stores hash value. cpu y found E right before it was deleted on cpu x. E is now re-inited on cpu z. cpu y was preempted before checking for expiry and/or confirm bit. ->refcnt set to 1 E now owned by skb ->timeout set to 30000 If cpu y were to resume now, it would observe E as expired but would skip E due to missing CONFIRMED bit. nf_conntrack_confirm gets called sets: ct->status |= CONFIRMED This is wrong: E is not yet added to hashtable. cpu y resumes, it observes E as expired but CONFIRMED: <resumes> nf_ct_expired() -> yes (ct->timeout is 30s) confirmed bit set. cpu y will try to delete E from the hashtable: nf_ct_delete() -> set DYING bit __nf_ct_delete_from_lists Even this scenario doesn't guarantee a crash: cpu z still holds the table bucket lock(s) so y blocks: wait for spinlock held by z CONFIRMED is set but there is no guarantee ct will be added to hash: "chaintoolong" or "clash resolution" logic both skip the insert step. reply hnnode.pprev still stores the hash value. unlocks spinlock return NF_DROP <unblocks, then crashes on hlist_nulls_del_rcu pprev> In case CPU z does insert the entry into the hashtable, cpu y will unlink E again right away but no crash occurs. Without 'cpu y' race, 'garbage' hlist is of no consequence: ct refcnt remains at 1, eventually skb will be free'd and E gets destroyed via: nf_conntrack_put -> nf_conntrack_destroy -> nf_ct_destroy. To resolve this, move the IPS_CONFIRMED assignment after the table insertion but before the unlock. Pablo points out that the confirm-bit-store could be reordered to happen before hlist add resp. the timeout fixup, so switch to set_bit and before_atomic memory barrier to prevent this. It doesn't matter if other CPUs can observe a newly inserted entry right before the CONFIRMED bit was set: Such event cannot be distinguished from above "E is the old incarnation" case: the entry will be skipped. Also change nf_ct_should_gc() to first check the confirmed bit. The gc sequence is: 1. Check if entry has expired, if not skip to next entry 2. Obtain a reference to the expired entry. 3. Call nf_ct_should_gc() to double-check step 1. nf_ct_should_gc() is thus called only for entries that already failed an expiry check. After this patch, once the confirmed bit check pas ---truncated---

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort() Commit fce886a60207 ("KVM: arm64: Plumb the pKVM MMU in KVM") made the initialization of the local memcache variable in user_mem_abort() conditional, leaving a codepath where it is used uninitialized via kvm_pgtable_stage2_map(). This can fail on any path that requires a stage-2 allocation without transition via a permission fault or dirty logging. Fix this by making sure that memcache is always valid.

In the Linux kernel, the following vulnerability has been resolved: net: ch9200: fix uninitialised access during mii_nway_restart In mii_nway_restart() the code attempts to call mii->mdio_read which is ch9200_mdio_read(). ch9200_mdio_read() utilises a local buffer called "buff", which is initialised with control_read(). However "buff" is conditionally initialised inside control_read(): if (err == size) { memcpy(data, buf, size); } If the condition of "err == size" is not met, then "buff" remains uninitialised. Once this happens the uninitialised "buff" is accessed and returned during ch9200_mdio_read(): return (buff[0] | buff[1] << 8); The problem stems from the fact that ch9200_mdio_read() ignores the return value of control_read(), leading to uinit-access of "buff". To fix this we should check the return value of control_read() and return early on error.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage() The function brcmf_usb_dl_writeimage() calls the function brcmf_usb_dl_cmd() but dose not check its return value. The 'state.state' and the 'state.bytes' are uninitialized if the function brcmf_usb_dl_cmd() fails. It is dangerous to use uninitialized variables in the conditions. Add error handling for brcmf_usb_dl_cmd() to jump to error handling path if the brcmf_usb_dl_cmd() fails and the 'state.state' and the 'state.bytes' are uninitialized. Improve the error message to report more detailed error information.

In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Cleanup after an allocation error When allocation failures are not cleaned up by the driver, further allocation errors will be false-positives, which will cause buffers to remain uninitialized and cause NULL pointer dereferences. Ensure proper cleanup of failed allocations to prevent these issues.

In the Linux kernel, the following vulnerability has been resolved: mtd: nand: ecc-mxic: Fix use of uninitialized variable ret If ctx->steps is zero, the loop processing ECC steps is skipped, and the variable ret remains uninitialized. It is later checked and returned, which leads to undefined behavior and may cause unpredictable results in user space or kernel crashes. This scenario can be triggered in edge cases such as misconfigured geometry, ECC engine misuse, or if ctx->steps is not validated after initialization. Initialize ret to zero before the loop to ensure correct and safe behavior regardless of the ctx->steps value. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reject TDLS operations when station is not associated syzbot triggered a WARN in ieee80211_tdls_oper() by sending NL80211_TDLS_ENABLE_LINK immediately after NL80211_CMD_CONNECT, before association completed and without prior TDLS setup. This left internal state like sdata->u.mgd.tdls_peer uninitialized, leading to a WARN_ON() in code paths that assumed it was valid. Reject the operation early if not in station mode or not associated.

In the Linux kernel, the following vulnerability has been resolved: media: cxusb: no longer judge rbuf when the write fails syzbot reported a uninit-value in cxusb_i2c_xfer. [1] Only when the write operation of usb_bulk_msg() in dvb_usb_generic_rw() succeeds and rlen is greater than 0, the read operation of usb_bulk_msg() will be executed to read rlen bytes of data from the dvb device into the rbuf. In this case, although rlen is 1, the write operation failed which resulted in the dvb read operation not being executed, and ultimately variable i was not initialized. [1] BUG: KMSAN: uninit-value in cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] BUG: KMSAN: uninit-value in cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 __i2c_transfer+0xe25/0x3150 drivers/i2c/i2c-core-base.c:-1 i2c_transfer+0x317/0x4a0 drivers/i2c/i2c-core-base.c:2315 i2c_transfer_buffer_flags+0x125/0x1e0 drivers/i2c/i2c-core-base.c:2343 i2c_master_send include/linux/i2c.h:109 [inline] i2cdev_write+0x210/0x280 drivers/i2c/i2c-dev.c:183 do_loop_readv_writev fs/read_write.c:848 [inline] vfs_writev+0x963/0x14e0 fs/read_write.c:1057 do_writev+0x247/0x5c0 fs/read_write.c:1101 __do_sys_writev fs/read_write.c:1169 [inline] __se_sys_writev fs/read_write.c:1166 [inline] __x64_sys_writev+0x98/0xe0 fs/read_write.c:1166 x64_sys_call+0x2229/0x3c80 arch/x86/include/generated/asm/syscalls_64.h:21 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: comedi: Fix initialization of data for instructions that write to subdevice Some Comedi subdevice instruction handlers are known to access instruction data elements beyond the first `insn->n` elements in some cases. The `do_insn_ioctl()` and `do_insnlist_ioctl()` functions allocate at least `MIN_SAMPLES` (16) data elements to deal with this, but they do not initialize all of that. For Comedi instruction codes that write to the subdevice, the first `insn->n` data elements are copied from user-space, but the remaining elements are left uninitialized. That could be a problem if the subdevice instruction handler reads the uninitialized data. Ensure that the first `MIN_SAMPLES` elements are initialized before calling these instruction handlers, filling the uncopied elements with 0. For `do_insnlist_ioctl()`, the same data buffer elements are used for handling a list of instructions, so ensure the first `MIN_SAMPLES` elements are initialized for each instruction that writes to the subdevice.

In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: Limit signal/freq counts in summary output functions The debugfs summary output could access uninitialized elements in the freq_in[] and signal_out[] arrays, causing NULL pointer dereferences and triggering a kernel Oops (page_fault_oops). This patch adds u8 fields (nr_freq_in, nr_signal_out) to track the number of initialized elements, with a maximum of 4 per array. The summary output functions are updated to respect these limits, preventing out-of-bounds access and ensuring safe array handling. Widen the label variables because the change confuses GCC about max length of the strings.

In the Linux kernel, the following vulnerability has been resolved: sched_ext: bpf_iter_scx_dsq_new() should always initialize iterator BPF programs may call next() and destroy() on BPF iterators even after new() returns an error value (e.g. bpf_for_each() macro ignores error returns from new()). bpf_iter_scx_dsq_new() could leave the iterator in an uninitialized state after an error return causing bpf_iter_scx_dsq_next() to dereference garbage data. Make bpf_iter_scx_dsq_new() always clear $kit->dsq so that next() and destroy() become noops.

In the Linux kernel, the following vulnerability has been resolved: jfs: Fix uninit-value access of imap allocated in the diMount() function syzbot reports that hex_dump_to_buffer is using uninit-value: ===================================================== BUG: KMSAN: uninit-value in hex_dump_to_buffer+0x888/0x1100 lib/hexdump.c:171 hex_dump_to_buffer+0x888/0x1100 lib/hexdump.c:171 print_hex_dump+0x13d/0x3e0 lib/hexdump.c:276 diFree+0x5ba/0x4350 fs/jfs/jfs_imap.c:876 jfs_evict_inode+0x510/0x550 fs/jfs/inode.c:156 evict+0x723/0xd10 fs/inode.c:796 iput_final fs/inode.c:1946 [inline] iput+0x97b/0xdb0 fs/inode.c:1972 txUpdateMap+0xf3e/0x1150 fs/jfs/jfs_txnmgr.c:2367 txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline] jfs_lazycommit+0x627/0x11d0 fs/jfs/jfs_txnmgr.c:2733 kthread+0x6b9/0xef0 kernel/kthread.c:464 ret_from_fork+0x6d/0x90 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Uninit was created at: slab_post_alloc_hook mm/slub.c:4121 [inline] slab_alloc_node mm/slub.c:4164 [inline] __kmalloc_cache_noprof+0x8e3/0xdf0 mm/slub.c:4320 kmalloc_noprof include/linux/slab.h:901 [inline] diMount+0x61/0x7f0 fs/jfs/jfs_imap.c:105 jfs_mount+0xa8e/0x11d0 fs/jfs/jfs_mount.c:176 jfs_fill_super+0xa47/0x17c0 fs/jfs/super.c:523 get_tree_bdev_flags+0x6ec/0x910 fs/super.c:1636 get_tree_bdev+0x37/0x50 fs/super.c:1659 jfs_get_tree+0x34/0x40 fs/jfs/super.c:635 vfs_get_tree+0xb1/0x5a0 fs/super.c:1814 do_new_mount+0x71f/0x15e0 fs/namespace.c:3560 path_mount+0x742/0x1f10 fs/namespace.c:3887 do_mount fs/namespace.c:3900 [inline] __do_sys_mount fs/namespace.c:4111 [inline] __se_sys_mount+0x71f/0x800 fs/namespace.c:4088 __x64_sys_mount+0xe4/0x150 fs/namespace.c:4088 x64_sys_call+0x39bf/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:166 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f ===================================================== The reason is that imap is not properly initialized after memory allocation. It will cause the snprintf() function to write uninitialized data into linebuf within hex_dump_to_buffer(). Fix this by using kzalloc instead of kmalloc to clear its content at the beginning in diMount().

In the Linux kernel, the following vulnerability has been resolved: media: mxl111sf: change mutex_init() location Syzbot reported, that mxl111sf_ctrl_msg() uses uninitialized mutex. The problem was in wrong mutex_init() location. Previous mutex_init(&state->msg_lock) call was in ->init() function, but dvb_usbv2_init() has this order of calls: dvb_usbv2_init() dvb_usbv2_adapter_init() dvb_usbv2_adapter_frontend_init() props->frontend_attach() props->init() Since mxl111sf_* devices call mxl111sf_ctrl_msg() in ->frontend_attach() internally we need to initialize state->msg_lock before frontend_attach(). To achieve it, ->probe() call added to all mxl111sf_* devices, which will simply initiaize mutex.

In the Linux kernel, the following vulnerability has been resolved: ppp: Fix KMSAN uninit-value warning with bpf Syzbot caught an "KMSAN: uninit-value" warning [1], which is caused by the ppp driver not initializing a 2-byte header when using socket filter. The following code can generate a PPP filter BPF program: ''' struct bpf_program fp; pcap_t *handle; handle = pcap_open_dead(DLT_PPP_PPPD, 65535); pcap_compile(handle, &fp, "ip and outbound", 0, 0); bpf_dump(&fp, 1); ''' Its output is: ''' (000) ldh [2] (001) jeq #0x21 jt 2 jf 5 (002) ldb [0] (003) jeq #0x1 jt 4 jf 5 (004) ret #65535 (005) ret #0 ''' Wen can find similar code at the following link: https://github.com/ppp-project/ppp/blob/master/pppd/options.c#L1680 The maintainer of this code repository is also the original maintainer of the ppp driver. As you can see the BPF program skips 2 bytes of data and then reads the 'Protocol' field to determine if it's an IP packet. Then it read the first byte of the first 2 bytes to determine the direction. The issue is that only the first byte indicating direction is initialized in current ppp driver code while the second byte is not initialized. For normal BPF programs generated by libpcap, uninitialized data won't be used, so it's not a problem. However, for carefully crafted BPF programs, such as those generated by syzkaller [2], which start reading from offset 0, the uninitialized data will be used and caught by KMSAN. [1] https://syzkaller.appspot.com/bug?extid=853242d9c9917165d791 [2] https://syzkaller.appspot.com/text?tag=ReproC&x=11994913980000

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid accessing uninitialized curseg syzbot reports a f2fs bug as below: F2FS-fs (loop3): Stopped filesystem due to reason: 7 kworker/u8:7: attempt to access beyond end of device BUG: unable to handle page fault for address: ffffed1604ea3dfa RIP: 0010:get_ckpt_valid_blocks fs/f2fs/segment.h:361 [inline] RIP: 0010:has_curseg_enough_space fs/f2fs/segment.h:570 [inline] RIP: 0010:__get_secs_required fs/f2fs/segment.h:620 [inline] RIP: 0010:has_not_enough_free_secs fs/f2fs/segment.h:633 [inline] RIP: 0010:has_enough_free_secs+0x575/0x1660 fs/f2fs/segment.h:649 <TASK> f2fs_is_checkpoint_ready fs/f2fs/segment.h:671 [inline] f2fs_write_inode+0x425/0x540 fs/f2fs/inode.c:791 write_inode fs/fs-writeback.c:1525 [inline] __writeback_single_inode+0x708/0x10d0 fs/fs-writeback.c:1745 writeback_sb_inodes+0x820/0x1360 fs/fs-writeback.c:1976 wb_writeback+0x413/0xb80 fs/fs-writeback.c:2156 wb_do_writeback fs/fs-writeback.c:2303 [inline] wb_workfn+0x410/0x1080 fs/fs-writeback.c:2343 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3317 worker_thread+0x870/0xd30 kernel/workqueue.c:3398 kthread+0x7a9/0x920 kernel/kthread.c:464 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Commit 8b10d3653735 ("f2fs: introduce FAULT_NO_SEGMENT") allows to trigger no free segment fault in allocator, then it will update curseg->segno to NULL_SEGNO, though, CP_ERROR_FLAG has been set, f2fs_write_inode() missed to check the flag, and access invalid curseg->segno directly in below call path, then resulting in panic: - f2fs_write_inode - f2fs_is_checkpoint_ready - has_enough_free_secs - has_not_enough_free_secs - __get_secs_required - has_curseg_enough_space - get_ckpt_valid_blocks : access invalid curseg->segno To avoid this issue, let's: - check CP_ERROR_FLAG flag in prior to f2fs_is_checkpoint_ready() in f2fs_write_inode(). - in has_curseg_enough_space(), save curseg->segno into a temp variable, and verify its validation before use.

In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix a use of uninitialized mutex commit c8347f915e67 ("gpu: host1x: Fix boot regression for Tegra") caused a use of uninitialized mutex leading to below warning when CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_LOCK_ALLOC are enabled. [ 41.662843] ------------[ cut here ]------------ [ 41.663012] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 41.663035] WARNING: CPU: 4 PID: 794 at kernel/locking/mutex.c:587 __mutex_lock+0x670/0x878 [ 41.663458] Modules linked in: rtw88_8822c(+) bluetooth(+) rtw88_pci rtw88_core mac80211 aquantia libarc4 crc_itu_t cfg80211 tegra194_cpufreq dwmac_tegra(+) arm_dsu_pmu stmmac_platform stmmac pcs_xpcs rfkill at24 host1x(+) tegra_bpmp_thermal ramoops reed_solomon fuse loop nfnetlink xfs mmc_block rpmb_core ucsi_ccg ina3221 crct10dif_ce xhci_tegra ghash_ce lm90 sha2_ce sha256_arm64 sha1_ce sdhci_tegra pwm_fan sdhci_pltfm sdhci gpio_keys rtc_tegra cqhci mmc_core phy_tegra_xusb i2c_tegra tegra186_gpc_dma i2c_tegra_bpmp spi_tegra114 dm_mirror dm_region_hash dm_log dm_mod [ 41.665078] CPU: 4 UID: 0 PID: 794 Comm: (udev-worker) Not tainted 6.11.0-29.31_1538613708.el10.aarch64+debug #1 [ 41.665838] Hardware name: NVIDIA NVIDIA Jetson AGX Orin Developer Kit/Jetson, BIOS 36.3.0-gcid-35594366 02/26/2024 [ 41.672555] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 41.679636] pc : __mutex_lock+0x670/0x878 [ 41.683834] lr : __mutex_lock+0x670/0x878 [ 41.688035] sp : ffff800084b77090 [ 41.691446] x29: ffff800084b77160 x28: ffffdd4bebf7b000 x27: ffffdd4be96b1000 [ 41.698799] x26: 1fffe0002308361c x25: 1ffff0001096ee18 x24: 0000000000000000 [ 41.706149] x23: 0000000000000000 x22: 0000000000000002 x21: ffffdd4be6e3c7a0 [ 41.713500] x20: ffff800084b770f0 x19: ffff00011841b1e8 x18: 0000000000000000 [ 41.720675] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720 [ 41.728023] x14: 0000000000000000 x13: 0000000000000001 x12: ffff6001a96eaab3 [ 41.735375] x11: 1fffe001a96eaab2 x10: ffff6001a96eaab2 x9 : ffffdd4be4838bbc [ 41.742723] x8 : 00009ffe5691554e x7 : ffff000d4b755593 x6 : 0000000000000001 [ 41.749985] x5 : ffff000d4b755590 x4 : 1fffe0001d88f001 x3 : dfff800000000000 [ 41.756988] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000ec478000 [ 41.764251] Call trace: [ 41.766695] __mutex_lock+0x670/0x878 [ 41.770373] mutex_lock_nested+0x2c/0x40 [ 41.774134] host1x_intr_start+0x54/0xf8 [host1x] [ 41.778863] host1x_runtime_resume+0x150/0x228 [host1x] [ 41.783935] pm_generic_runtime_resume+0x84/0xc8 [ 41.788485] __rpm_callback+0xa0/0x478 [ 41.792422] rpm_callback+0x15c/0x1a8 [ 41.795922] rpm_resume+0x698/0xc08 [ 41.799597] __pm_runtime_resume+0xa8/0x140 [ 41.803621] host1x_probe+0x810/0xbc0 [host1x] [ 41.807909] platform_probe+0xcc/0x1a8 [ 41.811845] really_probe+0x188/0x800 [ 41.815347] __driver_probe_device+0x164/0x360 [ 41.819810] driver_probe_device+0x64/0x1a8 [ 41.823834] __driver_attach+0x180/0x490 [ 41.827773] bus_for_each_dev+0x104/0x1a0 [ 41.831797] driver_attach+0x44/0x68 [ 41.835296] bus_add_driver+0x23c/0x4e8 [ 41.839235] driver_register+0x15c/0x3a8 [ 41.843170] __platform_register_drivers+0xa4/0x208 [ 41.848159] tegra_host1x_init+0x4c/0xff8 [host1x] [ 41.853147] do_one_initcall+0xd4/0x380 [ 41.856997] do_init_module+0x1dc/0x698 [ 41.860758] load_module+0xc70/0x1300 [ 41.864435] __do_sys_init_module+0x1a8/0x1d0 [ 41.868721] __arm64_sys_init_module+0x74/0xb0 [ 41.873183] invoke_syscall.constprop.0+0xdc/0x1e8 [ 41.877997] do_el0_svc+0x154/0x1d0 [ 41.881671] el0_svc+0x54/0x140 [ 41.884820] el0t_64_sync_handler+0x120/0x130 [ 41.889285] el0t_64_sync+0x1a4/0x1a8 [ 41.892960] irq event stamp: 69737 [ 41.896370] hardirqs last enabled at (69737): [<ffffdd4be6d7768c>] _raw_spin_unlock_irqrestore+0x44/0xe8 [ 41.905739] hardirqs last disabled at (69736): ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: Initialize ctx to avoid memory allocation error It is possible that ctx in nfqnl_build_packet_message() could be used before it is properly initialize, which is only initialized by nfqnl_get_sk_secctx(). This patch corrects this problem by initializing the lsmctx to a safe value when it is declared. This is similar to the commit 35fcac7a7c25 ("audit: Initialize lsmctx to avoid memory allocation error").

In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix incorrect initialization order Syzkaller reports the following bug: BUG: spinlock bad magic on CPU#1, syz-executor.0/7995 lock: 0xffff88805303f3e0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 1 PID: 7995 Comm: syz-executor.0 Tainted: G E 5.10.209+ #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x119/0x179 lib/dump_stack.c:118 debug_spin_lock_before kernel/locking/spinlock_debug.c:83 [inline] do_raw_spin_lock+0x1f6/0x270 kernel/locking/spinlock_debug.c:112 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:117 [inline] _raw_spin_lock_irqsave+0x50/0x70 kernel/locking/spinlock.c:159 reset_per_cpu_data+0xe6/0x240 [drop_monitor] net_dm_cmd_trace+0x43d/0x17a0 [drop_monitor] genl_family_rcv_msg_doit+0x22f/0x330 net/netlink/genetlink.c:739 genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] genl_rcv_msg+0x341/0x5a0 net/netlink/genetlink.c:800 netlink_rcv_skb+0x14d/0x440 net/netlink/af_netlink.c:2497 genl_rcv+0x29/0x40 net/netlink/genetlink.c:811 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x54b/0x800 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x914/0xe00 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:651 [inline] __sock_sendmsg+0x157/0x190 net/socket.c:663 ____sys_sendmsg+0x712/0x870 net/socket.c:2378 ___sys_sendmsg+0xf8/0x170 net/socket.c:2432 __sys_sendmsg+0xea/0x1b0 net/socket.c:2461 do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x62/0xc7 RIP: 0033:0x7f3f9815aee9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3f972bf0c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f3f9826d050 RCX: 00007f3f9815aee9 RDX: 0000000020000000 RSI: 0000000020001300 RDI: 0000000000000007 RBP: 00007f3f981b63bd R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f3f9826d050 R15: 00007ffe01ee6768 If drop_monitor is built as a kernel module, syzkaller may have time to send a netlink NET_DM_CMD_START message during the module loading. This will call the net_dm_monitor_start() function that uses a spinlock that has not yet been initialized. To fix this, let's place resource initialization above the registration of a generic netlink family. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: ipvlan: ensure network headers are in skb linear part syzbot found that ipvlan_process_v6_outbound() was assuming the IPv6 network header isis present in skb->head [1] Add the needed pskb_network_may_pull() calls for both IPv4 and IPv6 handlers. [1] BUG: KMSAN: uninit-value in __ipv6_addr_type+0xa2/0x490 net/ipv6/addrconf_core.c:47 __ipv6_addr_type+0xa2/0x490 net/ipv6/addrconf_core.c:47 ipv6_addr_type include/net/ipv6.h:555 [inline] ip6_route_output_flags_noref net/ipv6/route.c:2616 [inline] ip6_route_output_flags+0x51/0x720 net/ipv6/route.c:2651 ip6_route_output include/net/ip6_route.h:93 [inline] ipvlan_route_v6_outbound+0x24e/0x520 drivers/net/ipvlan/ipvlan_core.c:476 ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:491 [inline] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:541 [inline] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:605 [inline] ipvlan_queue_xmit+0xd72/0x1780 drivers/net/ipvlan/ipvlan_core.c:671 ipvlan_start_xmit+0x5b/0x210 drivers/net/ipvlan/ipvlan_main.c:223 __netdev_start_xmit include/linux/netdevice.h:5150 [inline] netdev_start_xmit include/linux/netdevice.h:5159 [inline] xmit_one net/core/dev.c:3735 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3751 sch_direct_xmit+0x399/0xd40 net/sched/sch_generic.c:343 qdisc_restart net/sched/sch_generic.c:408 [inline] __qdisc_run+0x14da/0x35d0 net/sched/sch_generic.c:416 qdisc_run+0x141/0x4d0 include/net/pkt_sched.h:127 net_tx_action+0x78b/0x940 net/core/dev.c:5484 handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561 __do_softirq+0x14/0x1a kernel/softirq.c:595 do_softirq+0x9a/0x100 kernel/softirq.c:462 __local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:389 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0x2758/0x57d0 net/core/dev.c:4611 dev_queue_xmit include/linux/netdevice.h:3311 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3132 [inline] packet_sendmsg+0x93e0/0xa7e0 net/packet/af_packet.c:3164 sock_sendmsg_nosec net/socket.c:718 [inline]

In the Linux kernel, the following vulnerability has been resolved: can: bcm: bcm_tx_setup(): fix KMSAN uninit-value in vfs_write Syzkaller reported the following issue: ===================================================== BUG: KMSAN: uninit-value in aio_rw_done fs/aio.c:1520 [inline] BUG: KMSAN: uninit-value in aio_write+0x899/0x950 fs/aio.c:1600 aio_rw_done fs/aio.c:1520 [inline] aio_write+0x899/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook mm/slab.h:766 [inline] slab_alloc_node mm/slub.c:3452 [inline] __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491 __do_kmalloc_node mm/slab_common.c:967 [inline] __kmalloc+0x11d/0x3b0 mm/slab_common.c:981 kmalloc_array include/linux/slab.h:636 [inline] bcm_tx_setup+0x80e/0x29d0 net/can/bcm.c:930 bcm_sendmsg+0x3a2/0xce0 net/can/bcm.c:1351 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] sock_write_iter+0x495/0x5e0 net/socket.c:1108 call_write_iter include/linux/fs.h:2189 [inline] aio_write+0x63a/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 1 PID: 5034 Comm: syz-executor350 Not tainted 6.2.0-rc6-syzkaller-80422-geda666ff2276 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 ===================================================== We can follow the call chain and find that 'bcm_tx_setup' function calls 'memcpy_from_msg' to copy some content to the newly allocated frame of 'op->frames'. After that the 'len' field of copied structure being compared with some constant value (64 or 8). However, if 'memcpy_from_msg' returns an error, we will compare some uninitialized memory. This triggers 'uninit-value' issue. This patch will add 'memcpy_from_msg' possible errors processing to avoid uninit-value issue. Tested via syzkaller

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix uninitialized size issue in radeon_vce_cs_parse() On the off chance that command stream passed from userspace via ioctl() call to radeon_vce_cs_parse() is weirdly crafted and first command to execute is to encode (case 0x03000001), the function in question will attempt to call radeon_vce_cs_reloc() with size argument that has not been properly initialized. Specifically, 'size' will point to 'tmp' variable before the latter had a chance to be assigned any value. Play it safe and init 'tmp' with 0, thus ensuring that radeon_vce_cs_reloc() will catch an early error in cases like these. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. (cherry picked from commit 2d52de55f9ee7aaee0e09ac443f77855989c6b68)

In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix uninit-value in vxlan_vnifilter_dump() KMSAN reported an uninit-value access in vxlan_vnifilter_dump() [1]. If the length of the netlink message payload is less than sizeof(struct tunnel_msg), vxlan_vnifilter_dump() accesses bytes beyond the message. This can lead to uninit-value access. Fix this by returning an error in such situations. [1] BUG: KMSAN: uninit-value in vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422 vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422 rtnl_dumpit+0xd5/0x2f0 net/core/rtnetlink.c:6786 netlink_dump+0x93e/0x15f0 net/netlink/af_netlink.c:2317 __netlink_dump_start+0x716/0xd60 net/netlink/af_netlink.c:2432 netlink_dump_start include/linux/netlink.h:340 [inline] rtnetlink_dump_start net/core/rtnetlink.c:6815 [inline] rtnetlink_rcv_msg+0x1256/0x14a0 net/core/rtnetlink.c:6882 netlink_rcv_skb+0x467/0x660 net/netlink/af_netlink.c:2542 rtnetlink_rcv+0x35/0x40 net/core/rtnetlink.c:6944 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0xed6/0x1290 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x1092/0x1230 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:726 ____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672 x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4110 [inline] slab_alloc_node mm/slub.c:4153 [inline] kmem_cache_alloc_node_noprof+0x800/0xe80 mm/slub.c:4205 kmalloc_reserve+0x13b/0x4b0 net/core/skbuff.c:587 __alloc_skb+0x347/0x7d0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1323 [inline] netlink_alloc_large_skb+0xa5/0x280 net/netlink/af_netlink.c:1196 netlink_sendmsg+0xac9/0x1230 net/netlink/af_netlink.c:1866 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:726 ____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672 x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 30991 Comm: syz.4.10630 Not tainted 6.12.0-10694-gc44daa7e3c73 #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014