In the Linux kernel, the following vulnerability has been resolved: nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails Have nvmet_req_init() and req->execute() complete failed commands. Description of the problem: nvmet_req_init() calls __nvmet_req_complete() internally upon failure, e.g., unsupported opcode, which calls the "queue_response" callback, this results in nvmet_pci_epf_queue_response() being called, which will call nvmet_pci_epf_complete_iod() if data_len is 0 or if dma_dir is different from DMA_TO_DEVICE. This results in a double completion as nvmet_pci_epf_exec_iod_work() also calls nvmet_pci_epf_complete_iod() when nvmet_req_init() fails. Steps to reproduce: On the host send a command with an unsupported opcode with nvme-cli, For example the admin command "security receive" $ sudo nvme security-recv /dev/nvme0n1 -n1 -x4096 This triggers a double completion as nvmet_req_init() fails and nvmet_pci_epf_queue_response() is called, here iod->dma_dir is still in the default state of "DMA_NONE" as set by default in nvmet_pci_epf_alloc_iod(), so nvmet_pci_epf_complete_iod() is called. Because nvmet_req_init() failed nvmet_pci_epf_complete_iod() is also called in nvmet_pci_epf_exec_iod_work() leading to a double completion. This not only sends two completions to the host but also corrupts the state of the PCI NVMe target leading to kernel oops. This patch lets nvmet_req_init() and req->execute() complete all failed commands, and removes the double completion case in nvmet_pci_epf_exec_iod_work() therefore fixing the edge cases where double completions occurred.

In the Linux kernel, the following vulnerability has been resolved: bpf, ktls: Fix data corruption when using bpf_msg_pop_data() in ktls When sending plaintext data, we initially calculated the corresponding ciphertext length. However, if we later reduced the plaintext data length via socket policy, we failed to recalculate the ciphertext length. This results in transmitting buffers containing uninitialized data during ciphertext transmission. This causes uninitialized bytes to be appended after a complete "Application Data" packet, leading to errors on the receiving end when parsing TLS record.

In the Linux kernel, the following vulnerability has been resolved: iio: accel: sca3300: fix uninitialized iio scan data Fix potential leak of uninitialized stack data to userspace by ensuring that the `channels` array is zeroed before use.

In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Set merge to zero early in af_alg_sendmsg If an error causes af_alg_sendmsg to abort, ctx->merge may contain a garbage value from the previous loop. This may then trigger a crash on the next entry into af_alg_sendmsg when it attempts to do a merge that can't be done. Fix this by setting ctx->merge to zero near the start of the loop.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix oops due to uninitialised variable Fix smb3_init_transform_rq() to initialise buffer to NULL before calling netfs_alloc_folioq_buffer() as netfs assumes it can append to the buffer it is given. Setting it to NULL means it should start a fresh buffer, but the value is currently undefined.

In the Linux kernel, the following vulnerability has been resolved: mISDN: hfcpci: Fix warning when deleting uninitialized timer With CONFIG_DEBUG_OBJECTS_TIMERS unloading hfcpci module leads to the following splat: [ 250.215892] ODEBUG: assert_init not available (active state 0) object: ffffffffc01a3dc0 object type: timer_list hint: 0x0 [ 250.217520] WARNING: CPU: 0 PID: 233 at lib/debugobjects.c:612 debug_print_object+0x1b6/0x2c0 [ 250.218775] Modules linked in: hfcpci(-) mISDN_core [ 250.219537] CPU: 0 UID: 0 PID: 233 Comm: rmmod Not tainted 6.17.0-rc2-g6f713187ac98 #2 PREEMPT(voluntary) [ 250.220940] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 250.222377] RIP: 0010:debug_print_object+0x1b6/0x2c0 [ 250.223131] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 4f 41 56 48 8b 14 dd a0 4e 01 9f 48 89 ee 48 c7 c7 20 46 01 9f e8 cb 84d [ 250.225805] RSP: 0018:ffff888015ea7c08 EFLAGS: 00010286 [ 250.226608] RAX: 0000000000000000 RBX: 0000000000000005 RCX: ffffffff9be93a95 [ 250.227708] RDX: 1ffff1100d945138 RSI: 0000000000000008 RDI: ffff88806ca289c0 [ 250.228993] RBP: ffffffff9f014a00 R08: 0000000000000001 R09: ffffed1002bd4f39 [ 250.230043] R10: ffff888015ea79cf R11: 0000000000000001 R12: 0000000000000001 [ 250.231185] R13: ffffffff9eea0520 R14: 0000000000000000 R15: ffff888015ea7cc8 [ 250.232454] FS: 00007f3208f01540(0000) GS:ffff8880caf5a000(0000) knlGS:0000000000000000 [ 250.233851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 250.234856] CR2: 00007f32090a7421 CR3: 0000000004d63000 CR4: 00000000000006f0 [ 250.236117] Call Trace: [ 250.236599] <TASK> [ 250.236967] ? trace_irq_enable.constprop.0+0xd4/0x130 [ 250.237920] debug_object_assert_init+0x1f6/0x310 [ 250.238762] ? __pfx_debug_object_assert_init+0x10/0x10 [ 250.239658] ? __lock_acquire+0xdea/0x1c70 [ 250.240369] __try_to_del_timer_sync+0x69/0x140 [ 250.241172] ? __pfx___try_to_del_timer_sync+0x10/0x10 [ 250.242058] ? __timer_delete_sync+0xc6/0x120 [ 250.242842] ? lock_acquire+0x30/0x80 [ 250.243474] ? __timer_delete_sync+0xc6/0x120 [ 250.244262] __timer_delete_sync+0x98/0x120 [ 250.245015] HFC_cleanup+0x10/0x20 [hfcpci] [ 250.245704] __do_sys_delete_module+0x348/0x510 [ 250.246461] ? __pfx___do_sys_delete_module+0x10/0x10 [ 250.247338] do_syscall_64+0xc1/0x360 [ 250.247924] entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by initializing hfc_tl timer with DEFINE_TIMER macro. Also, use mod_timer instead of manual timeout update.

In the Linux kernel, the following vulnerability has been resolved: sctp: initialize more fields in sctp_v6_from_sk() syzbot found that sin6_scope_id was not properly initialized, leading to undefined behavior. Clear sin6_scope_id and sin6_flowinfo. BUG: KMSAN: uninit-value in __sctp_v6_cmp_addr+0x887/0x8c0 net/sctp/ipv6.c:649 __sctp_v6_cmp_addr+0x887/0x8c0 net/sctp/ipv6.c:649 sctp_inet6_cmp_addr+0x4f2/0x510 net/sctp/ipv6.c:983 sctp_bind_addr_conflict+0x22a/0x3b0 net/sctp/bind_addr.c:390 sctp_get_port_local+0x21eb/0x2440 net/sctp/socket.c:8452 sctp_get_port net/sctp/socket.c:8523 [inline] sctp_listen_start net/sctp/socket.c:8567 [inline] sctp_inet_listen+0x710/0xfd0 net/sctp/socket.c:8636 __sys_listen_socket net/socket.c:1912 [inline] __sys_listen net/socket.c:1927 [inline] __do_sys_listen net/socket.c:1932 [inline] __se_sys_listen net/socket.c:1930 [inline] __x64_sys_listen+0x343/0x4c0 net/socket.c:1930 x64_sys_call+0x271d/0x3e20 arch/x86/include/generated/asm/syscalls_64.h:51 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable addr.i.i created at: sctp_get_port net/sctp/socket.c:8515 [inline] sctp_listen_start net/sctp/socket.c:8567 [inline] sctp_inet_listen+0x650/0xfd0 net/sctp/socket.c:8636 __sys_listen_socket net/socket.c:1912 [inline] __sys_listen net/socket.c:1927 [inline] __do_sys_listen net/socket.c:1932 [inline] __se_sys_listen net/socket.c:1930 [inline] __x64_sys_listen+0x343/0x4c0 net/socket.c:1930

In the Linux kernel, the following vulnerability has been resolved: comedi: Fix use of uninitialized memory in do_insn_ioctl() and do_insnlist_ioctl() syzbot reports a KMSAN kernel-infoleak in `do_insn_ioctl()`. A kernel buffer is allocated to hold `insn->n` samples (each of which is an `unsigned int`). For some instruction types, `insn->n` samples are copied back to user-space, unless an error code is being returned. The problem is that not all the instruction handlers that need to return data to userspace fill in the whole `insn->n` samples, so that there is an information leak. There is a similar syzbot report for `do_insnlist_ioctl()`, although it does not have a reproducer for it at the time of writing. One culprit is `insn_rw_emulate_bits()` which is used as the handler for `INSN_READ` or `INSN_WRITE` instructions for subdevices that do not have a specific handler for that instruction, but do have an `INSN_BITS` handler. For `INSN_READ` it only fills in at most 1 sample, so if `insn->n` is greater than 1, the remaining `insn->n - 1` samples copied to userspace will be uninitialized kernel data. Another culprit is `vm80xx_ai_insn_read()` in the "vm80xx" driver. It never returns an error, even if it fails to fill the buffer. Fix it in `do_insn_ioctl()` and `do_insnlist_ioctl()` by making sure that uninitialized parts of the allocated buffer are zeroed before handling each instruction. Thanks to Arnaud Lecomte for their fix to `do_insn_ioctl()`. That fix replaced the call to `kmalloc_array()` with `kcalloc()`, but it is not always necessary to clear the whole buffer.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort() Commit fce886a60207 ("KVM: arm64: Plumb the pKVM MMU in KVM") made the initialization of the local memcache variable in user_mem_abort() conditional, leaving a codepath where it is used uninitialized via kvm_pgtable_stage2_map(). This can fail on any path that requires a stage-2 allocation without transition via a permission fault or dirty logging. Fix this by making sure that memcache is always valid.

In the Linux kernel, the following vulnerability has been resolved: jfs: Fix uninit-value access of imap allocated in the diMount() function syzbot reports that hex_dump_to_buffer is using uninit-value: ===================================================== BUG: KMSAN: uninit-value in hex_dump_to_buffer+0x888/0x1100 lib/hexdump.c:171 hex_dump_to_buffer+0x888/0x1100 lib/hexdump.c:171 print_hex_dump+0x13d/0x3e0 lib/hexdump.c:276 diFree+0x5ba/0x4350 fs/jfs/jfs_imap.c:876 jfs_evict_inode+0x510/0x550 fs/jfs/inode.c:156 evict+0x723/0xd10 fs/inode.c:796 iput_final fs/inode.c:1946 [inline] iput+0x97b/0xdb0 fs/inode.c:1972 txUpdateMap+0xf3e/0x1150 fs/jfs/jfs_txnmgr.c:2367 txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline] jfs_lazycommit+0x627/0x11d0 fs/jfs/jfs_txnmgr.c:2733 kthread+0x6b9/0xef0 kernel/kthread.c:464 ret_from_fork+0x6d/0x90 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Uninit was created at: slab_post_alloc_hook mm/slub.c:4121 [inline] slab_alloc_node mm/slub.c:4164 [inline] __kmalloc_cache_noprof+0x8e3/0xdf0 mm/slub.c:4320 kmalloc_noprof include/linux/slab.h:901 [inline] diMount+0x61/0x7f0 fs/jfs/jfs_imap.c:105 jfs_mount+0xa8e/0x11d0 fs/jfs/jfs_mount.c:176 jfs_fill_super+0xa47/0x17c0 fs/jfs/super.c:523 get_tree_bdev_flags+0x6ec/0x910 fs/super.c:1636 get_tree_bdev+0x37/0x50 fs/super.c:1659 jfs_get_tree+0x34/0x40 fs/jfs/super.c:635 vfs_get_tree+0xb1/0x5a0 fs/super.c:1814 do_new_mount+0x71f/0x15e0 fs/namespace.c:3560 path_mount+0x742/0x1f10 fs/namespace.c:3887 do_mount fs/namespace.c:3900 [inline] __do_sys_mount fs/namespace.c:4111 [inline] __se_sys_mount+0x71f/0x800 fs/namespace.c:4088 __x64_sys_mount+0xe4/0x150 fs/namespace.c:4088 x64_sys_call+0x39bf/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:166 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f ===================================================== The reason is that imap is not properly initialized after memory allocation. It will cause the snprintf() function to write uninitialized data into linebuf within hex_dump_to_buffer(). Fix this by using kzalloc instead of kmalloc to clear its content at the beginning in diMount().

In the Linux kernel, the following vulnerability has been resolved: comedi: Fix initialization of data for instructions that write to subdevice Some Comedi subdevice instruction handlers are known to access instruction data elements beyond the first `insn->n` elements in some cases. The `do_insn_ioctl()` and `do_insnlist_ioctl()` functions allocate at least `MIN_SAMPLES` (16) data elements to deal with this, but they do not initialize all of that. For Comedi instruction codes that write to the subdevice, the first `insn->n` data elements are copied from user-space, but the remaining elements are left uninitialized. That could be a problem if the subdevice instruction handler reads the uninitialized data. Ensure that the first `MIN_SAMPLES` elements are initialized before calling these instruction handlers, filling the uncopied elements with 0. For `do_insnlist_ioctl()`, the same data buffer elements are used for handling a list of instructions, so ensure the first `MIN_SAMPLES` elements are initialized for each instruction that writes to the subdevice.

In the Linux kernel, the following vulnerability has been resolved: ipvs: fix uninit-value for saddr in do_output_route4 syzbot reports for uninit-value for the saddr argument [1]. commit 4754957f04f5 ("ipvs: do not use random local source address for tunnels") already implies that the input value of saddr should be ignored but the code is still reading it which can prevent to connect the route. Fix it by changing the argument to ret_saddr. [1] BUG: KMSAN: uninit-value in do_output_route4+0x42c/0x4d0 net/netfilter/ipvs/ip_vs_xmit.c:147 do_output_route4+0x42c/0x4d0 net/netfilter/ipvs/ip_vs_xmit.c:147 __ip_vs_get_out_rt+0x403/0x21d0 net/netfilter/ipvs/ip_vs_xmit.c:330 ip_vs_tunnel_xmit+0x205/0x2380 net/netfilter/ipvs/ip_vs_xmit.c:1136 ip_vs_in_hook+0x1aa5/0x35b0 net/netfilter/ipvs/ip_vs_core.c:2063 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf7/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] __ip_local_out+0x758/0x7e0 net/ipv4/ip_output.c:118 ip_local_out net/ipv4/ip_output.c:127 [inline] ip_send_skb+0x6a/0x3c0 net/ipv4/ip_output.c:1501 udp_send_skb+0xfda/0x1b70 net/ipv4/udp.c:1195 udp_sendmsg+0x2fe3/0x33c0 net/ipv4/udp.c:1483 inet_sendmsg+0x1fc/0x280 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x267/0x380 net/socket.c:727 ____sys_sendmsg+0x91b/0xda0 net/socket.c:2566 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2620 __sys_sendmmsg+0x41d/0x880 net/socket.c:2702 __compat_sys_sendmmsg net/compat.c:360 [inline] __do_compat_sys_sendmmsg net/compat.c:367 [inline] __se_compat_sys_sendmmsg net/compat.c:364 [inline] __ia32_compat_sys_sendmmsg+0xc8/0x140 net/compat.c:364 ia32_sys_call+0x3ffa/0x41f0 arch/x86/include/generated/asm/syscalls_32.h:346 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] __do_fast_syscall_32+0xb0/0x110 arch/x86/entry/syscall_32.c:306 do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:331 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:369 entry_SYSENTER_compat_after_hwframe+0x84/0x8e Uninit was created at: slab_post_alloc_hook mm/slub.c:4167 [inline] slab_alloc_node mm/slub.c:4210 [inline] __kmalloc_cache_noprof+0x8fa/0xe00 mm/slub.c:4367 kmalloc_noprof include/linux/slab.h:905 [inline] ip_vs_dest_dst_alloc net/netfilter/ipvs/ip_vs_xmit.c:61 [inline] __ip_vs_get_out_rt+0x35d/0x21d0 net/netfilter/ipvs/ip_vs_xmit.c:323 ip_vs_tunnel_xmit+0x205/0x2380 net/netfilter/ipvs/ip_vs_xmit.c:1136 ip_vs_in_hook+0x1aa5/0x35b0 net/netfilter/ipvs/ip_vs_core.c:2063 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf7/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] __ip_local_out+0x758/0x7e0 net/ipv4/ip_output.c:118 ip_local_out net/ipv4/ip_output.c:127 [inline] ip_send_skb+0x6a/0x3c0 net/ipv4/ip_output.c:1501 udp_send_skb+0xfda/0x1b70 net/ipv4/udp.c:1195 udp_sendmsg+0x2fe3/0x33c0 net/ipv4/udp.c:1483 inet_sendmsg+0x1fc/0x280 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x267/0x380 net/socket.c:727 ____sys_sendmsg+0x91b/0xda0 net/socket.c:2566 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2620 __sys_sendmmsg+0x41d/0x880 net/socket.c:2702 __compat_sys_sendmmsg net/compat.c:360 [inline] __do_compat_sys_sendmmsg net/compat.c:367 [inline] __se_compat_sys_sendmmsg net/compat.c:364 [inline] __ia32_compat_sys_sendmmsg+0xc8/0x140 net/compat.c:364 ia32_sys_call+0x3ffa/0x41f0 arch/x86/include/generated/asm/syscalls_32.h:346 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] __do_fast_syscall_32+0xb0/0x110 arch/x86/entry/syscall_32.c:306 do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:331 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:369 entry_SYSENTER_compat_after_hwframe+0x84/0x8e CPU: 0 UID: 0 PID: 22408 Comm: syz.4.5165 Not tainted 6.15.0-rc3-syzkaller-00019-gbc3372351d0c #0 PREEMPT(undef) Hardware name: Google Google Compute Engi ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: Limit signal/freq counts in summary output functions The debugfs summary output could access uninitialized elements in the freq_in[] and signal_out[] arrays, causing NULL pointer dereferences and triggering a kernel Oops (page_fault_oops). This patch adds u8 fields (nr_freq_in, nr_signal_out) to track the number of initialized elements, with a maximum of 4 per array. The summary output functions are updated to respect these limits, preventing out-of-bounds access and ensuring safe array handling. Widen the label variables because the change confuses GCC about max length of the strings.

In the Linux kernel, the following vulnerability has been resolved: mtd: nand: ecc-mxic: Fix use of uninitialized variable ret If ctx->steps is zero, the loop processing ECC steps is skipped, and the variable ret remains uninitialized. It is later checked and returned, which leads to undefined behavior and may cause unpredictable results in user space or kernel crashes. This scenario can be triggered in edge cases such as misconfigured geometry, ECC engine misuse, or if ctx->steps is not validated after initialization. Initialize ret to zero before the loop to ensure correct and safe behavior regardless of the ctx->steps value. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: net: mctp: Don't access ifa_index when missing In mctp_dump_addrinfo, ifa_index can be used to filter interfaces, but only when the struct ifaddrmsg is provided. Otherwise it will be comparing to uninitialised memory - reproducible in the syzkaller case from dhcpd, or busybox "ip addr show". The kernel MCTP implementation has always filtered by ifa_index, so existing userspace programs expecting to dump MCTP addresses must already be passing a valid ifa_index value (either 0 or a real index). BUG: KMSAN: uninit-value in mctp_dump_addrinfo+0x208/0xac0 net/mctp/device.c:128 mctp_dump_addrinfo+0x208/0xac0 net/mctp/device.c:128 rtnl_dump_all+0x3ec/0x5b0 net/core/rtnetlink.c:4380 rtnl_dumpit+0xd5/0x2f0 net/core/rtnetlink.c:6824 netlink_dump+0x97b/0x1690 net/netlink/af_netlink.c:2309

In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Cleanup after an allocation error When allocation failures are not cleaned up by the driver, further allocation errors will be false-positives, which will cause buffers to remain uninitialized and cause NULL pointer dereferences. Ensure proper cleanup of failed allocations to prevent these issues.

In the Linux kernel, the following vulnerability has been resolved: sched_ext: bpf_iter_scx_dsq_new() should always initialize iterator BPF programs may call next() and destroy() on BPF iterators even after new() returns an error value (e.g. bpf_for_each() macro ignores error returns from new()). bpf_iter_scx_dsq_new() could leave the iterator in an uninitialized state after an error return causing bpf_iter_scx_dsq_next() to dereference garbage data. Make bpf_iter_scx_dsq_new() always clear $kit->dsq so that next() and destroy() become noops.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix iteration of extrefs during log replay At __inode_add_ref() when processing extrefs, if we jump into the next label we have an undefined value of victim_name.len, since we haven't initialized it before we did the goto. This results in an invalid memory access in the next iteration of the loop since victim_name.len was not initialized to the length of the name of the current extref. Fix this by initializing victim_name.len with the current extref's name length.

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: ep: Update read pointer only after buffer is written Inside mhi_ep_ring_add_element, the read pointer (rd_offset) is updated before the buffer is written, potentially causing race conditions where the host sees an updated read pointer before the buffer is actually written. Updating rd_offset prematurely can lead to the host accessing an uninitialized or incomplete element, resulting in data corruption. Invoke the buffer write before updating rd_offset to ensure the element is fully written before signaling its availability.

In the Linux kernel, the following vulnerability has been resolved: net: ch9200: fix uninitialised access during mii_nway_restart In mii_nway_restart() the code attempts to call mii->mdio_read which is ch9200_mdio_read(). ch9200_mdio_read() utilises a local buffer called "buff", which is initialised with control_read(). However "buff" is conditionally initialised inside control_read(): if (err == size) { memcpy(data, buf, size); } If the condition of "err == size" is not met, then "buff" remains uninitialised. Once this happens the uninitialised "buff" is accessed and returned during ch9200_mdio_read(): return (buff[0] | buff[1] << 8); The problem stems from the fact that ch9200_mdio_read() ignores the return value of control_read(), leading to uinit-access of "buff". To fix this we should check the return value of control_read() and return early on error.

In the Linux kernel, the following vulnerability has been resolved: iio: common: st_sensors: Fix use of uninitialize device structs Throughout the various probe functions &indio_dev->dev is used before it is initialized. This caused a kernel panic in st_sensors_power_enable() when the call to devm_regulator_bulk_get_enable() fails and then calls dev_err_probe() with the uninitialized device. This seems to only cause a panic with dev_err_probe(), dev_err(), dev_warn() and dev_info() don't seem to cause a panic, but are fixed as well. The issue is reported and traced here: [1]

In the Linux kernel, the following vulnerability has been resolved: comedi: Fix use of uninitialized data in insn_rw_emulate_bits() For Comedi `INSN_READ` and `INSN_WRITE` instructions on "digital" subdevices (subdevice types `COMEDI_SUBD_DI`, `COMEDI_SUBD_DO`, and `COMEDI_SUBD_DIO`), it is common for the subdevice driver not to have `insn_read` and `insn_write` handler functions, but to have an `insn_bits` handler function for handling Comedi `INSN_BITS` instructions. In that case, the subdevice's `insn_read` and/or `insn_write` function handler pointers are set to point to the `insn_rw_emulate_bits()` function by `__comedi_device_postconfig()`. For `INSN_WRITE`, `insn_rw_emulate_bits()` currently assumes that the supplied `data[0]` value is a valid copy from user memory. It will at least exist because `do_insnlist_ioctl()` and `do_insn_ioctl()` in "comedi_fops.c" ensure at lease `MIN_SAMPLES` (16) elements are allocated. However, if `insn->n` is 0 (which is allowable for `INSN_READ` and `INSN_WRITE` instructions, then `data[0]` may contain uninitialized data, and certainly contains invalid data, possibly from a different instruction in the array of instructions handled by `do_insnlist_ioctl()`. This will result in an incorrect value being written to the digital output channel (or to the digital input/output channel if configured as an output), and may be reflected in the internal saved state of the channel. Fix it by returning 0 early if `insn->n` is 0, before reaching the code that accesses `data[0]`. Previously, the function always returned 1 on success, but it is supposed to be the number of data samples actually read or written up to `insn->n`, which is 0 in this case.

In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: Reorder clock handling and power management in probe Reorder the initialization sequence in `usbhs_probe()` to enable runtime PM before accessing registers, preventing potential crashes due to uninitialized clocks. Currently, in the probe path, registers are accessed before enabling the clocks, leading to a synchronous external abort on the RZ/V2H SoC. The problematic call flow is as follows: usbhs_probe() usbhs_sys_clock_ctrl() usbhs_bset() usbhs_write() iowrite16() <-- Register access before enabling clocks Since `iowrite16()` is performed without ensuring the required clocks are enabled, this can lead to access errors. To fix this, enable PM runtime early in the probe function and ensure clocks are acquired before register access, preventing crashes like the following on RZ/V2H: [13.272640] Internal error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP [13.280814] Modules linked in: cec renesas_usbhs(+) drm_kms_helper fuse drm backlight ipv6 [13.289088] CPU: 1 UID: 0 PID: 195 Comm: (udev-worker) Not tainted 6.14.0-rc7+ #98 [13.296640] Hardware name: Renesas RZ/V2H EVK Board based on r9a09g057h44 (DT) [13.303834] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [13.310770] pc : usbhs_bset+0x14/0x4c [renesas_usbhs] [13.315831] lr : usbhs_probe+0x2e4/0x5ac [renesas_usbhs] [13.321138] sp : ffff8000827e3850 [13.324438] x29: ffff8000827e3860 x28: 0000000000000000 x27: ffff8000827e3ca0 [13.331554] x26: ffff8000827e3ba0 x25: ffff800081729668 x24: 0000000000000025 [13.338670] x23: ffff0000c0f08000 x22: 0000000000000000 x21: ffff0000c0f08010 [13.345783] x20: 0000000000000000 x19: ffff0000c3b52080 x18: 00000000ffffffff [13.352895] x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000827e36ce [13.360009] x14: 00000000000003d7 x13: 00000000000003d7 x12: 0000000000000000 [13.367122] x11: 0000000000000000 x10: 0000000000000aa0 x9 : ffff8000827e3750 [13.374235] x8 : ffff0000c1850b00 x7 : 0000000003826060 x6 : 000000000000001c [13.381347] x5 : 000000030d5fcc00 x4 : ffff8000825c0000 x3 : 0000000000000000 [13.388459] x2 : 0000000000000400 x1 : 0000000000000000 x0 : ffff0000c3b52080 [13.395574] Call trace: [13.398013] usbhs_bset+0x14/0x4c [renesas_usbhs] (P) [13.403076] platform_probe+0x68/0xdc [13.406738] really_probe+0xbc/0x2c0 [13.410306] __driver_probe_device+0x78/0x120 [13.414653] driver_probe_device+0x3c/0x154 [13.418825] __driver_attach+0x90/0x1a0 [13.422647] bus_for_each_dev+0x7c/0xe0 [13.426470] driver_attach+0x24/0x30 [13.430032] bus_add_driver+0xe4/0x208 [13.433766] driver_register+0x68/0x130 [13.437587] __platform_driver_register+0x24/0x30 [13.442273] renesas_usbhs_driver_init+0x20/0x1000 [renesas_usbhs] [13.448450] do_one_initcall+0x60/0x1d4 [13.452276] do_init_module+0x54/0x1f8 [13.456014] load_module+0x1754/0x1c98 [13.459750] init_module_from_file+0x88/0xcc [13.464004] __arm64_sys_finit_module+0x1c4/0x328 [13.468689] invoke_syscall+0x48/0x104 [13.472426] el0_svc_common.constprop.0+0xc0/0xe0 [13.477113] do_el0_svc+0x1c/0x28 [13.480415] el0_svc+0x30/0xcc [13.483460] el0t_64_sync_handler+0x10c/0x138 [13.487800] el0t_64_sync+0x198/0x19c [13.491453] Code: 2a0103e1 12003c42 12003c63 8b010084 (79400084) [13.497522] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: of/fdt: run soc memory setup when early_init_dt_scan_memory fails If memory has been found early_init_dt_scan_memory now returns 1. If it hasn't found any memory it will return 0, allowing other memory setup mechanisms to carry on. Previously early_init_dt_scan_memory always returned 0 without distinguishing between any kind of memory setup being done or not. Any code path after the early_init_dt_scan memory call in the ramips plat_mem_setup code wouldn't be executed anymore. Making early_init_dt_scan_memory the only way to initialize the memory. Some boards, including my mt7621 based Cudy X6 board, depend on memory initialization being done via the soc_info.mem_detect function pointer. Those wouldn't be able to obtain memory and panic the kernel during early bootup with the message "early_init_dt_alloc_memory_arch: Failed to allocate 12416 bytes align=0x40".

In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Allow UD qp_type to join multicast only As for multicast: - The SIDR is the only mode that makes sense; - Besides PS_UDP, other port spaces like PS_IB is also allowed, as it is UD compatible. In this case qkey also needs to be set [1]. This patch allows only UD qp_type to join multicast, and set qkey to default if it's not set, to fix an uninit-value error: the ib->rec.qkey field is accessed without being initialized. ===================================================== BUG: KMSAN: uninit-value in cma_set_qkey drivers/infiniband/core/cma.c:510 [inline] BUG: KMSAN: uninit-value in cma_make_mc_event+0xb73/0xe00 drivers/infiniband/core/cma.c:4570 cma_set_qkey drivers/infiniband/core/cma.c:510 [inline] cma_make_mc_event+0xb73/0xe00 drivers/infiniband/core/cma.c:4570 cma_iboe_join_multicast drivers/infiniband/core/cma.c:4782 [inline] rdma_join_multicast+0x2b83/0x30a0 drivers/infiniband/core/cma.c:4814 ucma_process_join+0xa76/0xf60 drivers/infiniband/core/ucma.c:1479 ucma_join_multicast+0x1e3/0x250 drivers/infiniband/core/ucma.c:1546 ucma_write+0x639/0x6d0 drivers/infiniband/core/ucma.c:1732 vfs_write+0x8ce/0x2030 fs/read_write.c:588 ksys_write+0x28c/0x520 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __ia32_sys_write+0xdb/0x120 fs/read_write.c:652 do_syscall_32_irqs_on arch/x86/entry/common.c:114 [inline] __do_fast_syscall_32+0x96/0xf0 arch/x86/entry/common.c:180 do_fast_syscall_32+0x34/0x70 arch/x86/entry/common.c:205 do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:248 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c Local variable ib.i created at: cma_iboe_join_multicast drivers/infiniband/core/cma.c:4737 [inline] rdma_join_multicast+0x586/0x30a0 drivers/infiniband/core/cma.c:4814 ucma_process_join+0xa76/0xf60 drivers/infiniband/core/ucma.c:1479 CPU: 0 PID: 29874 Comm: syz-executor.3 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ===================================================== [1] https://lore.kernel.org/linux-rdma/20220117183832.GD84788@nvidia.com/

In the Linux kernel, the following vulnerability has been resolved: net: usb: smsc75xx: Fix uninit-value access in __smsc75xx_read_reg syzbot reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] BUG: KMSAN: uninit-value in smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 CPU: 0 PID: 8696 Comm: kworker/0:3 Not tainted 5.8.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 usbnet_probe+0x1152/0x3f90 drivers/net/usb/usbnet.c:1737 usb_probe_interface+0xece/0x1550 drivers/usb/core/driver.c:374 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_set_configuration+0x380f/0x3f10 drivers/usb/core/message.c:2032 usb_generic_driver_probe+0x138/0x300 drivers/usb/core/generic.c:241 usb_probe_device+0x311/0x490 drivers/usb/core/driver.c:272 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_new_device+0x1bd4/0x2a30 drivers/usb/core/hub.c:2554 hub_port_connect drivers/usb/core/hub.c:5208 [inline] hub_port_connect_change drivers/usb/core/hub.c:5348 [inline] port_event drivers/usb/core/hub.c:5494 [inline] hub_event+0x5e7b/0x8a70 drivers/usb/core/hub.c:5576 process_one_work+0x1688/0x2140 kernel/workqueue.c:2269 worker_thread+0x10bc/0x2730 kernel/workqueue.c:2415 kthread+0x551/0x590 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 Local variable ----buf.i87@smsc75xx_bind created at: __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 This issue is caused because usbnet_read_cmd() reads less bytes than requested (zero byte in the reproducer). In this case, 'buf' is not properly filled. This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads less bytes than requested.

In the Linux kernel, the following vulnerability has been resolved: udf: Fix uninitialized array access for some pathnames For filenames that begin with . and are between 2 and 5 characters long, UDF charset conversion code would read uninitialized memory in the output buffer. The only practical impact is that the name may be prepended a "unification hash" when it is not actually needed but still it is good to fix this.

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Do not try to cleanup after cxl_region_setup_targets() fails Commit 5e42bcbc3fef ("cxl/region: decrement ->nr_targets on error in cxl_region_attach()") tried to avoid 'eiw' initialization errors when ->nr_targets exceeded 16, by just decrementing ->nr_targets when cxl_region_setup_targets() failed. Commit 86987c766276 ("cxl/region: Cleanup target list on attach error") extended that cleanup to also clear cxled->pos and p->targets[pos]. The initialization error was incidentally fixed separately by: Commit 8d4285425714 ("cxl/region: Fix port setup uninitialized variable warnings") which was merged a few days after 5e42bcbc3fef. But now the original cleanup when cxl_region_setup_targets() fails prevents endpoint and switch decoder resources from being reused: 1) the cleanup does not set the decoder's region to NULL, which results in future dpa_size_store() calls returning -EBUSY 2) the decoder is not properly freed, which results in future commit errors associated with the upstream switch Now that the initialization errors were fixed separately, the proper cleanup for this case is to just return immediately. Then the resources associated with this target get cleanup up as normal when the failed region is deleted. The ->nr_targets decrement in the error case also helped prevent a p->targets[] array overflow, so add a new check to prevent against that overflow. Tested by trying to create an invalid region for a 2 switch * 2 endpoint topology, and then following up with creating a valid region.

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: initialize struct pn533_out_arg properly struct pn533_out_arg used as a temporary context for out_urb is not initialized properly. Its uninitialized 'phy' field can be dereferenced in error cases inside pn533_out_complete() callback function. It causes the following failure: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.2.0-rc3-next-20230110-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:pn533_out_complete.cold+0x15/0x44 drivers/nfc/pn533/usb.c:441 Call Trace: <IRQ> __usb_hcd_giveback_urb+0x2b6/0x5c0 drivers/usb/core/hcd.c:1671 usb_hcd_giveback_urb+0x384/0x430 drivers/usb/core/hcd.c:1754 dummy_timer+0x1203/0x32d0 drivers/usb/gadget/udc/dummy_hcd.c:1988 call_timer_fn+0x1da/0x800 kernel/time/timer.c:1700 expire_timers+0x234/0x330 kernel/time/timer.c:1751 __run_timers kernel/time/timer.c:2022 [inline] __run_timers kernel/time/timer.c:1995 [inline] run_timer_softirq+0x326/0x910 kernel/time/timer.c:2035 __do_softirq+0x1fb/0xaf6 kernel/softirq.c:571 invoke_softirq kernel/softirq.c:445 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:650 irq_exit_rcu+0x9/0x20 kernel/softirq.c:662 sysvec_apic_timer_interrupt+0x97/0xc0 arch/x86/kernel/apic/apic.c:1107 Initialize the field with the pn533_usb_phy currently used. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: llc: verify mac len before reading mac header LLC reads the mac header with eth_hdr without verifying that the skb has an Ethernet header. Syzbot was able to enter llc_rcv on a tun device. Tun can insert packets without mac len and with user configurable skb->protocol (passing a tun_pi header when not configuring IFF_NO_PI). BUG: KMSAN: uninit-value in llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline] BUG: KMSAN: uninit-value in llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111 llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline] llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111 llc_rcv+0xc5d/0x14a0 net/llc/llc_input.c:218 __netif_receive_skb_one_core net/core/dev.c:5523 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5637 netif_receive_skb_internal net/core/dev.c:5723 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5782 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555 tun_get_user+0x54c5/0x69c0 drivers/net/tun.c:2002 Add a mac_len test before all three eth_hdr(skb) calls under net/llc. There are further uses in include/net/llc_pdu.h. All these are protected by a test skb->protocol == ETH_P_802_2. Which does not protect against this tun scenario. But the mac_len test added in this patch in llc_fixup_skb will indirectly protect those too. That is called from llc_rcv before any other LLC code. It is tempting to just add a blanket mac_len check in llc_rcv, but not sure whether that could break valid LLC paths that do not assume an Ethernet header. 802.2 LLC may be used on top of non-802.3 protocols in principle. The below referenced commit shows that used to, on top of Token Ring. At least one of the three eth_hdr uses goes back to before the start of git history. But the one that syzbot exercises is introduced in this commit. That commit is old enough (2008), that effectively all stable kernels should receive this.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix error unwind in rxe_create_qp() In the function rxe_create_qp(), rxe_qp_from_init() is called to initialize qp, internally things like the spin locks are not setup until rxe_qp_init_req(). If an error occures before this point then the unwind will call rxe_cleanup() and eventually to rxe_qp_do_cleanup()/rxe_cleanup_task() which will oops when trying to access the uninitialized spinlock. Move the spinlock initializations earlier before any failures.

In the Linux kernel, the following vulnerability has been resolved: chardev: fix error handling in cdev_device_add() While doing fault injection test, I got the following report: ------------[ cut here ]------------ kobject: '(null)' (0000000039956980): is not initialized, yet kobject_put() is being called. WARNING: CPU: 3 PID: 6306 at kobject_put+0x23d/0x4e0 CPU: 3 PID: 6306 Comm: 283 Tainted: G W 6.1.0-rc2-00005-g307c1086d7c9 #1253 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:kobject_put+0x23d/0x4e0 Call Trace: <TASK> cdev_device_add+0x15e/0x1b0 __iio_device_register+0x13b4/0x1af0 [industrialio] __devm_iio_device_register+0x22/0x90 [industrialio] max517_probe+0x3d8/0x6b4 [max517] i2c_device_probe+0xa81/0xc00 When device_add() is injected fault and returns error, if dev->devt is not set, cdev_add() is not called, cdev_del() is not needed. Fix this by checking dev->devt in error path.

In the Linux kernel, the following vulnerability has been resolved: kcm: fix strp_init() order and cleanup strp_init() is called just a few lines above this csk->sk_user_data check, it also initializes strp->work etc., therefore, it is unnecessary to call strp_done() to cancel the freshly initialized work. And if sk_user_data is already used by KCM, psock->strp should not be touched, particularly strp->work state, so we need to move strp_init() after the csk->sk_user_data check. This also makes a lockdep warning reported by syzbot go away.

In the Linux kernel, the following vulnerability has been resolved: ext4: init quota for 'old.inode' in 'ext4_rename' Syzbot found the following issue: ext4_parse_param: s_want_extra_isize=128 ext4_inode_info_init: s_want_extra_isize=32 ext4_rename: old.inode=ffff88823869a2c8 old.dir=ffff888238699828 new.inode=ffff88823869d7e8 new.dir=ffff888238699828 __ext4_mark_inode_dirty: inode=ffff888238699828 ea_isize=32 want_ea_size=128 __ext4_mark_inode_dirty: inode=ffff88823869a2c8 ea_isize=32 want_ea_size=128 ext4_xattr_block_set: inode=ffff88823869a2c8 ------------[ cut here ]------------ WARNING: CPU: 13 PID: 2234 at fs/ext4/xattr.c:2070 ext4_xattr_block_set.cold+0x22/0x980 Modules linked in: RIP: 0010:ext4_xattr_block_set.cold+0x22/0x980 RSP: 0018:ffff888227d3f3b0 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88823007a000 RCX: 0000000000000000 RDX: 0000000000000a03 RSI: 0000000000000040 RDI: ffff888230078178 RBP: 0000000000000000 R08: 000000000000002c R09: ffffed1075c7df8e R10: ffff8883ae3efc6b R11: ffffed1075c7df8d R12: 0000000000000000 R13: ffff88823869a2c8 R14: ffff8881012e0460 R15: dffffc0000000000 FS: 00007f350ac1f740(0000) GS:ffff8883ae200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f350a6ed6a0 CR3: 0000000237456000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? ext4_xattr_set_entry+0x3b7/0x2320 ? ext4_xattr_block_set+0x0/0x2020 ? ext4_xattr_set_entry+0x0/0x2320 ? ext4_xattr_check_entries+0x77/0x310 ? ext4_xattr_ibody_set+0x23b/0x340 ext4_xattr_move_to_block+0x594/0x720 ext4_expand_extra_isize_ea+0x59a/0x10f0 __ext4_expand_extra_isize+0x278/0x3f0 __ext4_mark_inode_dirty.cold+0x347/0x410 ext4_rename+0xed3/0x174f vfs_rename+0x13a7/0x2510 do_renameat2+0x55d/0x920 __x64_sys_rename+0x7d/0xb0 do_syscall_64+0x3b/0xa0 entry_SYSCALL_64_after_hwframe+0x72/0xdc As 'ext4_rename' will modify 'old.inode' ctime and mark inode dirty, which may trigger expand 'extra_isize' and allocate block. If inode didn't init quota will lead to warning. To solve above issue, init 'old.inode' firstly in 'ext4_rename'.

In the Linux kernel, the following vulnerability has been resolved: clocksource: hyper-v: unexport __init-annotated hv_init_clocksource() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, arch/x86/kernel/cpu/mshyperv.c is never compiled as modular. (CONFIG_HYPERVISOR_GUEST is boolean)

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clean up si_domain in the init_dmars() error path A splat from kmem_cache_destroy() was seen with a kernel prior to commit ee2653bbe89d ("iommu/vt-d: Remove domain and devinfo mempool") when there was a failure in init_dmars(), because the iommu_domain cache still had objects. While the mempool code is now gone, there still is a leak of the si_domain memory if init_dmars() fails. So clean up si_domain in the init_dmars() error path.

In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: Fix crash on isr after kexec() If the system is rebooted via isr(), the IRQ handler might be triggered before the domain is initialized. Resulting on an invalid memory access error. Fix: [ 0.500930] Unable to handle kernel read from unreadable memory at virtual address 0000000000000070 [ 0.501166] Call trace: [ 0.501174] report_iommu_fault+0x28/0xfc [ 0.501180] mtk_iommu_isr+0x10c/0x1c0 [ joro: Fixed spelling in commit message ]

In the Linux kernel, the following vulnerability has been resolved: tick/nohz: unexport __init-annotated tick_nohz_full_setup() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it had been broken for a decade. Commit 28438794aba4 ("modpost: fix section mismatch check for exported init/exit sections") fixed it so modpost started to warn it again, then this showed up: MODPOST vmlinux.symvers WARNING: modpost: vmlinux.o(___ksymtab_gpl+tick_nohz_full_setup+0x0): Section mismatch in reference from the variable __ksymtab_tick_nohz_full_setup to the function .init.text:tick_nohz_full_setup() The symbol tick_nohz_full_setup is exported and annotated __init Fix this by removing the __init annotation of tick_nohz_full_setup or drop the export. Drop the export because tick_nohz_full_setup() is only called from the built-in code in kernel/sched/isolation.c.

In the Linux kernel, the following vulnerability has been resolved: net: ena: Fix error handling in ena_init() The ena_init() won't destroy workqueue created by create_singlethread_workqueue() when pci_register_driver() failed. Call destroy_workqueue() when pci_register_driver() failed to prevent the resource leak.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported Russell King reports that on the ZII dev rev B, deleting a bridge VLAN from a user port fails with -ENOENT: https://lore.kernel.org/netdev/Z_lQXNP0s5-IiJzd@shell.armlinux.org.uk/ This comes from mv88e6xxx_port_vlan_leave() -> mv88e6xxx_mst_put(), which tries to find an MST entry in &chip->msts associated with the SID, but fails and returns -ENOENT as such. But we know that this chip does not support MST at all, so that is not surprising. The question is why does the guard in mv88e6xxx_mst_put() not exit early: if (!sid) return 0; And the answer seems to be simple: the sid comes from vlan.sid which supposedly was previously populated by mv88e6xxx_vtu_get(). But some chip->info->ops->vtu_getnext() implementations do not populate vlan.sid, for example see mv88e6185_g1_vtu_getnext(). In that case, later in mv88e6xxx_port_vlan_leave() we are using a garbage sid which is just residual stack memory. Testing for sid == 0 covers all cases of a non-bridge VLAN or a bridge VLAN mapped to the default MSTI. For some chips, SID 0 is valid and installed by mv88e6xxx_stu_setup(). A chip which does not support the STU would implicitly only support mapping all VLANs to the default MSTI, so although SID 0 is not valid, it would be sufficient, if we were to zero-initialize the vlan structure, to fix the bug, due to the coincidence that a test for vlan.sid == 0 already exists and leads to the same (correct) behavior. Another option which would be sufficient would be to add a test for mv88e6xxx_has_stu() inside mv88e6xxx_mst_put(), symmetric to the one which already exists in mv88e6xxx_mst_get(). But that placement means the caller will have to dereference vlan.sid, which means it will access uninitialized memory, which is not nice even if it ignores it later. So we end up making both modifications, in order to not rely just on the sid == 0 coincidence, but also to avoid having uninitialized structure fields which might get temporarily accessed.

In the Linux kernel, the following vulnerability has been resolved: can: j1939: j1939_send_one(): fix missing CAN header initialization The read access to struct canxl_frame::len inside of a j1939 created skbuff revealed a missing initialization of reserved and later filled elements in struct can_frame. This patch initializes the 8 byte CAN header with zero.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: Init completion before kobject_init_and_add() In cpufreq_policy_alloc(), it will call uninitialed completion in cpufreq_sysfs_release() when kobject_init_and_add() fails. And that will cause a crash such as the following page fault in complete: BUG: unable to handle page fault for address: fffffffffffffff8 [..] RIP: 0010:complete+0x98/0x1f0 [..] Call Trace: kobject_put+0x1be/0x4c0 cpufreq_online.cold+0xee/0x1fd cpufreq_add_dev+0x183/0x1e0 subsys_interface_register+0x3f5/0x4e0 cpufreq_register_driver+0x3b7/0x670 acpi_cpufreq_init+0x56c/0x1000 [acpi_cpufreq] do_one_initcall+0x13d/0x780 do_init_module+0x1c3/0x630 load_module+0x6e67/0x73b0 __do_sys_finit_module+0x181/0x240 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: wifi: wil6210: debugfs: fix uninitialized variable use in `wil_write_file_wmi()` Commit 7a4836560a61 changes simple_write_to_buffer() with memdup_user() but it forgets to change the value to be returned that came from simple_write_to_buffer() call. It results in the following warning: warning: variable 'rc' is uninitialized when used here [-Wuninitialized] return rc; ^~ Remove rc variable and just return the passed in length if the memdup_user() succeeds.

In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command When control vq receives a VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command request from the driver, presently there is no validation against the number of queue pairs to configure, or even if multiqueue had been negotiated or not is unverified. This may lead to kernel panic due to uninitialized resource for the queues were there any bogus request sent down by untrusted driver. Tie up the loose ends there.

In the Linux kernel, the following vulnerability has been resolved: ath9k_htc: fix uninit value bugs Syzbot reported 2 KMSAN bugs in ath9k. All of them are caused by missing field initialization. In htc_connect_service() svc_meta_len and pad are not initialized. Based on code it looks like in current skb there is no service data, so simply initialize svc_meta_len to 0. htc_issue_send() does not initialize htc_frame_hdr::control array. Based on firmware code, it will initialize it by itself, so simply zero whole array to make KMSAN happy Fail logs: BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline] hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479 htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline] htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275 ... Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1126 [inline] htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258 ... Bytes 4-7 of 18 are uninitialized Memory access of size 18 starts at ffff888027377e00 BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline] hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479 htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline] htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275 ... Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1126 [inline] htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258 ... Bytes 16-17 of 18 are uninitialized Memory access of size 18 starts at ffff888027377e00

In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix a use of uninitialized mutex commit c8347f915e67 ("gpu: host1x: Fix boot regression for Tegra") caused a use of uninitialized mutex leading to below warning when CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_LOCK_ALLOC are enabled. [ 41.662843] ------------[ cut here ]------------ [ 41.663012] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 41.663035] WARNING: CPU: 4 PID: 794 at kernel/locking/mutex.c:587 __mutex_lock+0x670/0x878 [ 41.663458] Modules linked in: rtw88_8822c(+) bluetooth(+) rtw88_pci rtw88_core mac80211 aquantia libarc4 crc_itu_t cfg80211 tegra194_cpufreq dwmac_tegra(+) arm_dsu_pmu stmmac_platform stmmac pcs_xpcs rfkill at24 host1x(+) tegra_bpmp_thermal ramoops reed_solomon fuse loop nfnetlink xfs mmc_block rpmb_core ucsi_ccg ina3221 crct10dif_ce xhci_tegra ghash_ce lm90 sha2_ce sha256_arm64 sha1_ce sdhci_tegra pwm_fan sdhci_pltfm sdhci gpio_keys rtc_tegra cqhci mmc_core phy_tegra_xusb i2c_tegra tegra186_gpc_dma i2c_tegra_bpmp spi_tegra114 dm_mirror dm_region_hash dm_log dm_mod [ 41.665078] CPU: 4 UID: 0 PID: 794 Comm: (udev-worker) Not tainted 6.11.0-29.31_1538613708.el10.aarch64+debug #1 [ 41.665838] Hardware name: NVIDIA NVIDIA Jetson AGX Orin Developer Kit/Jetson, BIOS 36.3.0-gcid-35594366 02/26/2024 [ 41.672555] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 41.679636] pc : __mutex_lock+0x670/0x878 [ 41.683834] lr : __mutex_lock+0x670/0x878 [ 41.688035] sp : ffff800084b77090 [ 41.691446] x29: ffff800084b77160 x28: ffffdd4bebf7b000 x27: ffffdd4be96b1000 [ 41.698799] x26: 1fffe0002308361c x25: 1ffff0001096ee18 x24: 0000000000000000 [ 41.706149] x23: 0000000000000000 x22: 0000000000000002 x21: ffffdd4be6e3c7a0 [ 41.713500] x20: ffff800084b770f0 x19: ffff00011841b1e8 x18: 0000000000000000 [ 41.720675] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720 [ 41.728023] x14: 0000000000000000 x13: 0000000000000001 x12: ffff6001a96eaab3 [ 41.735375] x11: 1fffe001a96eaab2 x10: ffff6001a96eaab2 x9 : ffffdd4be4838bbc [ 41.742723] x8 : 00009ffe5691554e x7 : ffff000d4b755593 x6 : 0000000000000001 [ 41.749985] x5 : ffff000d4b755590 x4 : 1fffe0001d88f001 x3 : dfff800000000000 [ 41.756988] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000ec478000 [ 41.764251] Call trace: [ 41.766695] __mutex_lock+0x670/0x878 [ 41.770373] mutex_lock_nested+0x2c/0x40 [ 41.774134] host1x_intr_start+0x54/0xf8 [host1x] [ 41.778863] host1x_runtime_resume+0x150/0x228 [host1x] [ 41.783935] pm_generic_runtime_resume+0x84/0xc8 [ 41.788485] __rpm_callback+0xa0/0x478 [ 41.792422] rpm_callback+0x15c/0x1a8 [ 41.795922] rpm_resume+0x698/0xc08 [ 41.799597] __pm_runtime_resume+0xa8/0x140 [ 41.803621] host1x_probe+0x810/0xbc0 [host1x] [ 41.807909] platform_probe+0xcc/0x1a8 [ 41.811845] really_probe+0x188/0x800 [ 41.815347] __driver_probe_device+0x164/0x360 [ 41.819810] driver_probe_device+0x64/0x1a8 [ 41.823834] __driver_attach+0x180/0x490 [ 41.827773] bus_for_each_dev+0x104/0x1a0 [ 41.831797] driver_attach+0x44/0x68 [ 41.835296] bus_add_driver+0x23c/0x4e8 [ 41.839235] driver_register+0x15c/0x3a8 [ 41.843170] __platform_register_drivers+0xa4/0x208 [ 41.848159] tegra_host1x_init+0x4c/0xff8 [host1x] [ 41.853147] do_one_initcall+0xd4/0x380 [ 41.856997] do_init_module+0x1dc/0x698 [ 41.860758] load_module+0xc70/0x1300 [ 41.864435] __do_sys_init_module+0x1a8/0x1d0 [ 41.868721] __arm64_sys_init_module+0x74/0xb0 [ 41.873183] invoke_syscall.constprop.0+0xdc/0x1e8 [ 41.877997] do_el0_svc+0x154/0x1d0 [ 41.881671] el0_svc+0x54/0x140 [ 41.884820] el0t_64_sync_handler+0x120/0x130 [ 41.889285] el0t_64_sync+0x1a4/0x1a8 [ 41.892960] irq event stamp: 69737 [ 41.896370] hardirqs last enabled at (69737): [<ffffdd4be6d7768c>] _raw_spin_unlock_irqrestore+0x44/0xe8 [ 41.905739] hardirqs last disabled at (69736): ---truncated---

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid accessing uninitialized curseg syzbot reports a f2fs bug as below: F2FS-fs (loop3): Stopped filesystem due to reason: 7 kworker/u8:7: attempt to access beyond end of device BUG: unable to handle page fault for address: ffffed1604ea3dfa RIP: 0010:get_ckpt_valid_blocks fs/f2fs/segment.h:361 [inline] RIP: 0010:has_curseg_enough_space fs/f2fs/segment.h:570 [inline] RIP: 0010:__get_secs_required fs/f2fs/segment.h:620 [inline] RIP: 0010:has_not_enough_free_secs fs/f2fs/segment.h:633 [inline] RIP: 0010:has_enough_free_secs+0x575/0x1660 fs/f2fs/segment.h:649 <TASK> f2fs_is_checkpoint_ready fs/f2fs/segment.h:671 [inline] f2fs_write_inode+0x425/0x540 fs/f2fs/inode.c:791 write_inode fs/fs-writeback.c:1525 [inline] __writeback_single_inode+0x708/0x10d0 fs/fs-writeback.c:1745 writeback_sb_inodes+0x820/0x1360 fs/fs-writeback.c:1976 wb_writeback+0x413/0xb80 fs/fs-writeback.c:2156 wb_do_writeback fs/fs-writeback.c:2303 [inline] wb_workfn+0x410/0x1080 fs/fs-writeback.c:2343 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3317 worker_thread+0x870/0xd30 kernel/workqueue.c:3398 kthread+0x7a9/0x920 kernel/kthread.c:464 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Commit 8b10d3653735 ("f2fs: introduce FAULT_NO_SEGMENT") allows to trigger no free segment fault in allocator, then it will update curseg->segno to NULL_SEGNO, though, CP_ERROR_FLAG has been set, f2fs_write_inode() missed to check the flag, and access invalid curseg->segno directly in below call path, then resulting in panic: - f2fs_write_inode - f2fs_is_checkpoint_ready - has_enough_free_secs - has_not_enough_free_secs - __get_secs_required - has_curseg_enough_space - get_ckpt_valid_blocks : access invalid curseg->segno To avoid this issue, let's: - check CP_ERROR_FLAG flag in prior to f2fs_is_checkpoint_ready() in f2fs_write_inode(). - in has_curseg_enough_space(), save curseg->segno into a temp variable, and verify its validation before use.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: Initialize ctx to avoid memory allocation error It is possible that ctx in nfqnl_build_packet_message() could be used before it is properly initialize, which is only initialized by nfqnl_get_sk_secctx(). This patch corrects this problem by initializing the lsmctx to a safe value when it is declared. This is similar to the commit 35fcac7a7c25 ("audit: Initialize lsmctx to avoid memory allocation error").

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix free of uninitialized nfs4_label on referral lookup. Send along the already-allocated fattr along with nfs4_fs_locations, and drop the memcpy of fattr. We end up growing two more allocations, but this fixes up a crash as: PID: 790 TASK: ffff88811b43c000 CPU: 0 COMMAND: "ls" #0 [ffffc90000857920] panic at ffffffff81b9bfde #1 [ffffc900008579c0] do_trap at ffffffff81023a9b #2 [ffffc90000857a10] do_error_trap at ffffffff81023b78 #3 [ffffc90000857a58] exc_stack_segment at ffffffff81be1f45 #4 [ffffc90000857a80] asm_exc_stack_segment at ffffffff81c009de #5 [ffffc90000857b08] nfs_lookup at ffffffffa0302322 [nfs] #6 [ffffc90000857b70] __lookup_slow at ffffffff813a4a5f #7 [ffffc90000857c60] walk_component at ffffffff813a86c4 #8 [ffffc90000857cb8] path_lookupat at ffffffff813a9553 #9 [ffffc90000857cf0] filename_lookup at ffffffff813ab86b

In the Linux kernel, the following vulnerability has been resolved: pds_core: handle unsupported PDS_CORE_CMD_FW_CONTROL result If the FW doesn't support the PDS_CORE_CMD_FW_CONTROL command the driver might at the least print garbage and at the worst crash when the user runs the "devlink dev info" devlink command. This happens because the stack variable fw_list is not 0 initialized which results in fw_list.num_fw_slots being a garbage value from the stack. Then the driver tries to access fw_list.fw_names[i] with i >= ARRAY_SIZE and runs off the end of the array. Fix this by initializing the fw_list and by not failing completely if the devcmd fails because other useful information is printed via devlink dev info even if the devcmd fails.