A command injection vulnerability exists in Moxa Inc VPort 461 Series Firmware Version 3.4 or lower that could allow a remote attacker to execute arbitrary commands in Moxa's VPort 461 Series Industrial Video Servers.

OPTILINK OP-XT71000N V2.2 is vulnerable to Remote Code Execution. The issue occurs when the attacker sends an arbitrary code on "/diag_ping_admin.asp" to "PingTest" interface that leads to COMMAND EXECUTION. An attacker can successfully trigger the COMMAND and can compromise full system.

Unauthenticated remote code execution in OPTILINK OP-XT71000N, Hardware Version: V2.2 occurs when the attacker passes arbitrary commands with IP-ADDRESS using " | " to execute commands on " /diag_tracert_admin.asp " in the "PingTest" parameter that leads to command execution.

In Pluck-4.7.10-dev2 admin background, a remote command execution vulnerability exists when uploading files.

Command Injection in Simiki v1.6.2.1 and prior allows remote attackers to execute arbitrary system commands via line 64 of the component 'simiki/blob/master/simiki/config.py'.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetWLanApcliSettings. This vulnerability allows attackers to execute arbitrary commands via the ApCliKeyStr parameter.

TOTOLINK X5000R v9.1.0u.6118_B20201102 was discovered to contain a command injection vulnerability in the function NTPSyncWithHost. This vulnerability allows attackers to execute arbitrary commands via the parameter host_time.

Multiple versions of GARO Wallbox GLB/GTB/GTC are affected by unauthenticated command injection. The url parameter of the function module downloadAndUpdate is vulnerable to an command Injection. Unfiltered user input is used to generate code which then gets executed when downloading new firmware.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK752 before 3.2.17.12, RBR750 before 3.2.17.12, RBS750 before 3.2.17.12, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D7000v2 before 1.0.0.66, D8500 before 1.0.3.58, R7000 before 1.0.11.110, R7100LG before 1.0.0.72, R7900 before 1.0.4.30, R8000 before 1.0.4.62, XR300 before 1.0.3.56, R7000P before 1.3.2.132, R8500 before 1.0.2.144, R6900P before 1.3.2.132, and R8300 before 1.0.2.144.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetStationSettings. This vulnerability allows attackers to execute arbitrary commands via the station_access_enable parameter.

In Xiaomi router R3600 ROM version<1.0.66, filters in the set_WAN6 interface can be bypassed, causing remote code execution. The router administrator can gain root access from this vulnerability.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function wget_test.asp. This vulnerability allows attackers to execute arbitrary commands via the url parameter.

Advantech iView, versions 5.6 and prior, has an improper neutralization of special elements used in a command (“command injection”) vulnerability. Successful exploitation of this vulnerability may allow an attacker to send a HTTP GET or POST request that creates a command string without any validation. The attacker may then remotely execute code.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetStaticRouteSettings. This vulnerability allows attackers to execute arbitrary commands via the staticroute_list parameter.

On Draytek Vigor3900, Vigor2960, and Vigor 300B devices before 1.5.1.1, there are some command-injection vulnerabilities in the mainfunction.cgi file.

rkscli in Ruckus Wireless Unleashed through 200.7.10.92 allows a remote attacker to achieve command injection and jailbreak the CLI via a crafted CLI command. This affects C110, E510, H320, H510, M510, R320, R310, R500, R510 R600, R610, R710, R720, R750, T300, T301n, T301s, T310c, T310d, T310n, T310s, T610, T710, and T710s devices.

emfd/libemf in Ruckus Wireless Unleashed through 200.7.10.102.92 allows a remote attacker to achieve command injection via a crafted HTTP request. This affects C110, E510, H320, H510, M510, R320, R310, R500, R510 R600, R610, R710, R720, R750, T300, T301n, T301s, T310c, T310d, T310n, T310s, T610, T710, and T710s devices.

There is command injection in the addMeshNode interface of xqnetwork.lua, which leads to command execution under administrator authority on Xiaomi router AX3600 with rom versionrom< 1.1.12

Openfind MailGates contains a Command Injection flaw, when receiving email with specific strings, malicious code in the mail attachment will be triggered and gain unauthorized access to system files.

Wavlink WN575A4, WN579X3, and WN530G3A devices through 2020-05-15 allow unauthenticated remote users to inject commands via the key parameter in a login request.

u'In the lbd service, an external user can issue a specially crafted debug command to overwrite arbitrary files with arbitrary content resulting in remote code execution.' in Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Wired Infrastructure and Networking in IPQ4019, IPQ6018, IPQ8064, IPQ8074, QCA4531, QCA9531, QCA9980

An issue was discovered in Titan SpamTitan 7.07. Improper input sanitization of the parameter community on the page snmp-x.php would allow a remote attacker to inject commands into the file snmpd.conf that would allow executing commands on the target server.

node-dns-sync (npm module dns-sync) through 0.2.0 allows execution of arbitrary commands . This issue may lead to remote code execution if a client of the library calls the vulnerable method with untrusted input. This has been fixed in 0.2.1.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects R6400v2 before 1.0.4.84, R6700 before 1.0.2.8, R6700v3 before 1.0.4.84, R6900 before 1.0.2.8, and R7900 before 1.0.3.10.

/cgi-bin/activate.cgi on Draytek Vigor3900, Vigor2960, and Vigor300B devices before 1.5.1 allows remote attackers to achieve command injection via a remote HTTP request in DEBUG mode.

An issue was discovered on Xiaomi Mi Jia ink-jet printer < 3.4.6_0138. Injecting parameters to ippserver through the web management background, resulting in command execution vulnerabilities.

Remote Code Execution vulnerability that allows unauthenticated attackers to inject arbitrary commands into the hostname of the device.

The restapps (aka Rest Phone apps) module for Sangoma FreePBX and PBXact 13, 14, and 15 through 15.0.19.2 allows remote code execution via a URL variable to an AMI command.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.14, EX6100v2 before 1.0.1.98, EX6150v2 before 1.0.1.98, EX6250 before 1.0.0.132, EX6400 before 1.0.2.158, EX6400v2 before 1.0.0.132, EX6410 before 1.0.0.132, EX6420 before 1.0.0.132, EX7300 before 1.0.2.158, EX7300v2 before 1.0.0.132, EX7320 before 1.0.0.132, EX7700 before 1.0.0.216, EX8000 before 1.0.1.232, R7800 before 1.0.2.78, RBK12 before 2.6.1.44, RBR10 before 2.6.1.44, RBS10 before 2.6.1.44, RBK20 before 2.6.1.38, RBR20 before 2.6.1.36, RBS20 before 2.6.1.38, RBK40 before 2.6.1.38, RBR40 before 2.6.1.36, RBS40 before 2.6.1.38, RBK50 before 2.6.1.40, RBR50 before 2.6.1.40, RBS50 before 2.6.1.40, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RBS40V before 2.6.2.4, RBS50Y before 2.6.1.40, RBW30 before 2.6.2.2, and XR500 before 2.3.2.114.

Remote Code Execution vulnerability in Micro Focus ArcSight Enterprise Security Manager (ESM) product, affecting versions 7.0.2 through 7.5. The vulnerability could be exploited resulting in remote code execution.

A vulnerability, which was classified as critical, has been found in json-logic-js 2.0.0. Affected by this issue is some unknown functionality of the file logic.js. The manipulation leads to command injection. Upgrading to version 2.0.1 is able to address this issue. The patch is identified as c1dd82f5b15d8a553bb7a0cfa841ab8a11a9c227. It is recommended to upgrade the affected component. VDB-222266 is the identifier assigned to this vulnerability.

ColdFusion 2018- update 4 and earlier and ColdFusion 2016- update 11 and earlier have a Command Injection via Vulnerable component vulnerability. Successful exploitation could lead to Arbitrary code execution in the context of the current user.

Adobe Experience Manager versions 6.5, 6.4, 6.3 and 6.2 have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

Adobe Acrobat and Reader versions 2019.012.20035 and earlier, 2019.012.20035 and earlier, 2017.011.30142 and earlier, 2017.011.30143 and earlier, 2015.006.30497 and earlier, and 2015.006.30498 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution .

TOTOLINK X18 V9.1.0cu.2053_B20230309 was discovered to contain a command injection vulnerability via the mac parameter in the setEasyMeshAgentCfg function.

Advantech WebAccess/SCADA, Versions 8.3.5 and prior. Multiple command injection vulnerabilities, caused by a lack of proper validation of user-supplied data, may allow remote code execution.

A vulnerability has been found in D-Link R15 (AX1500) 1.20.01 and below. By manipulating the model name parameter during a password change request in the web administrator page, it is possible to trigger a command injection in httpd.

TOTOLINK X18 V9.1.0cu.2053_B20230309 was discovered to contain a command injection vulnerability via the agentName parameter in the setEasyMeshAgentCfg function.

Honeywell HDZP252DI 1.00.HW02.4 and HBW2PER1 1.000.HW01.3 devices allow a video replay attack after ARP cache poisoning has been achieved.

Operating system command injection vulnerability in AndSoft's e-TMS v25.03. This vulnerability allows an attacker to execute operating system commands on the server by sending a POST request. The relationship between parameter and assigned identifier is a 'm' parameter in '/clt/LOGINFRM_LXA.ASP'.

This command injection vulnerability allows attackers to execute arbitrary commands in a compromised application. QNAP have already fixed this vulnerability in the following versions of QTS and QuTS hero. QuTS hero h4.5.1.1472 build 20201031 and later QTS 4.5.1.1456 build 20201015 and later QTS 4.4.3.1354 build 20200702 and later

This vulnerability allows authenticated attackers to execute arbitrary commands on the underlying system using the file name of an uploaded file.

Operating system command injection vulnerability in AndSoft's e-TMS v25.03. This vulnerability allows an attacker to execute operating system commands on the server by sending a POST request. The relationship between parameter and assigned identifier is a 'm' parameter in '/clt/LOGINFRM_original.ASP'.

A remote code execution vulnerability in development mode Rails <5.2.2.1, <6.0.0.beta3 can allow an attacker to guess the automatically generated development mode secret token. This secret token can be used in combination with other Rails internals to escalate to a remote code execution exploit.

Operating system command injection vulnerability in AndSoft's e-TMS v25.03. This vulnerability allows an attacker to execute operating system commands on the server by sending a POST request. The relationship between parameter and assigned identifier is a 'm' parameter in '/clt/LOGINFRM_CAT.ASP'.

Operating system command injection vulnerability in AndSoft's e-TMS v25.03. This vulnerability allows an attacker to execute operating system commands on the server by sending a POST request. The relationship between parameter and assigned identifier is a 'm' parameter in '/clt/LOGINFRM_DJO.ASP'.

Accellion File Transfer Appliance version FTA_8_0_540 suffers from an instance of CWE-77: Improper Neutralization of Special Elements used in a Command ('Command Injection').

The npm package `interactive-git-checkout` is an interactive command-line tool that allows users to checkout a git branch while it prompts for the branch name on the command-line. It is available as an npm package and can be installed via `npm install -g interactive-git-checkout`. Versions up to and including 1.1.4 of the `interactive-git-checkout` tool are vulnerable to a command injection vulnerability because the software passes the branch name to the `git checkout` command using the Node.js child process module's `exec()` function without proper input validation or sanitization. Commit 8dd832dd302af287a61611f4f85e157cd1c6bb41 fixes the issue.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D8500 before 1.0.3.58, R6900P before 1.3.2.132, R7000P before 1.3.2.132, R7100LG before 1.0.0.64, WNDR3400v3 before 1.0.1.38, and XR300 before 1.0.3.56.