An issue was discovered in UCI IDOL 2 (aka uciIDOL or IDOL2) through 2.12. Due to improper input validation, improper deserialization, and improper restriction of operations within the bounds of a memory buffer, IDOL2 is vulnerable to Denial-of-Service (DoS) attacks and possibly remote code execution. A certain XmlMessage document causes 100% CPU consumption.

An issue was discovered in UCI IDOL 2 (aka uciIDOL or IDOL2) through 2.12. Due to improper input validation, improper deserialization, and improper restriction of operations within the bounds of a memory buffer, IDOL2 is vulnerable to Denial-of-Service (DoS) attacks and possibly remote code execution. There is an access violation and EIP overwrite after five logins.

An issue, also known as DW201703-006, was discovered in libdwarf 2017-03-21. A heap-based buffer over-read in dwarf_formsdata() is due to a failure to check a pointer for being in bounds (in a few places in this function) and a failure in a check in dwarf_attr_list().

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary performs a memcpy operation at address 0x00011E34 with the value sent in the "Authorization: Basic" RTSP header and stores it on the stack. The number of bytes to be copied are calculated based on the length of the string sent in the RTSP header by the client. As a result, memcpy copies more data then it can hold on stack and this results in corrupting the registers for the caller function sub_F6CC which results in memory corruption. The severity of this attack is enlarged by the fact that the same value is then copied on the stack in the function 0x00011378 and this allows to overflow the buffer allocated and thus control the PC register which will result in arbitrary code execution on the device.

In FreeBSD 12.1-STABLE before r356035, 12.1-RELEASE before 12.1-RELEASE-p4, 11.3-STABLE before r356036, and 11.3-RELEASE before 11.3-RELEASE-p8, incomplete packet data validation may result in accessing out-of-bounds memory leading to a kernel panic or other unpredictable results.

An issue was discovered in adns before 1.5.2. pap_mailbox822 does not properly check st from adns__findlabel_next. Without this, an uninitialised stack value can be used as the first label length. Depending on the circumstances, an attacker might be able to trick adns into crashing the calling program, leaking aspects of the contents of some of its memory, causing it to allocate lots of memory, or perhaps overrunning a buffer. This is only possible with applications which make non-raw queries for SOA or RP records.

A vulnerability with the SmartService API Service option exists whereby an unauthorized user could potentially exploit this to upload malicious code to the server that could be executed at system level privileges. This affects Johnson Controls' Kantech EntraPass Corporate Edition versions 8.0 and prior; Kantech EntraPass Global Edition versions 8.0 and prior.

Ansible before versions 2.3.1.0 and 2.4.0.0 fails to properly mark lookup-plugin results as unsafe. If an attacker could control the results of lookup() calls, they could inject Unicode strings to be parsed by the jinja2 templating system, resulting in code execution. By default, the jinja2 templating language is now marked as 'unsafe' and is not evaluated.

A vulnerability in the Cisco Cluster Management Protocol (CMP) processing code in Cisco IOS and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device or remotely execute code with elevated privileges. The Cluster Management Protocol utilizes Telnet internally as a signaling and command protocol between cluster members. The vulnerability is due to the combination of two factors: (1) the failure to restrict the use of CMP-specific Telnet options only to internal, local communications between cluster members and instead accept and process such options over any Telnet connection to an affected device; and (2) the incorrect processing of malformed CMP-specific Telnet options. An attacker could exploit this vulnerability by sending malformed CMP-specific Telnet options while establishing a Telnet session with an affected Cisco device configured to accept Telnet connections. An exploit could allow an attacker to execute arbitrary code and obtain full control of the device or cause a reload of the affected device. This affects Catalyst switches, Embedded Service 2020 switches, Enhanced Layer 2 EtherSwitch Service Module, Enhanced Layer 2/3 EtherSwitch Service Module, Gigabit Ethernet Switch Module (CGESM) for HP, IE Industrial Ethernet switches, ME 4924-10GE switch, RF Gateway 10, and SM-X Layer 2/3 EtherSwitch Service Module. Cisco Bug IDs: CSCvd48893.

EMC VASA Provider Virtual Appliance versions 8.3.x and prior has an unauthenticated remote code execution vulnerability that could potentially be exploited by malicious users to compromise the affected system.

A vulnerability has been identified in RUGGEDCOM RM1224 LTE(4G) EU (6GK6108-4AM00-2BA2) (All versions < V8.2), RUGGEDCOM RM1224 LTE(4G) NAM (6GK6108-4AM00-2DA2) (All versions < V8.2), SCALANCE M804PB (6GK5804-0AP00-2AA2) (All versions < V8.2), SCALANCE M812-1 ADSL-Router (6GK5812-1AA00-2AA2) (All versions < V8.2), SCALANCE M812-1 ADSL-Router (6GK5812-1BA00-2AA2) (All versions < V8.2), SCALANCE M816-1 ADSL-Router (6GK5816-1AA00-2AA2) (All versions < V8.2), SCALANCE M816-1 ADSL-Router (6GK5816-1BA00-2AA2) (All versions < V8.2), SCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2) (All versions < V8.2), SCALANCE M874-2 (6GK5874-2AA00-2AA2) (All versions < V8.2), SCALANCE M874-3 (6GK5874-3AA00-2AA2) (All versions < V8.2), SCALANCE M874-3 3G-Router (CN) (6GK5874-3AA00-2FA2) (All versions < V8.2), SCALANCE M876-3 (6GK5876-3AA02-2BA2) (All versions < V8.2), SCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2) (All versions < V8.2), SCALANCE M876-4 (6GK5876-4AA10-2BA2) (All versions < V8.2), SCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2) (All versions < V8.2), SCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2) (All versions < V8.2), SCALANCE MUM853-1 (A1) (6GK5853-2EA10-2AA1) (All versions < V8.2), SCALANCE MUM853-1 (B1) (6GK5853-2EA10-2BA1) (All versions < V8.2), SCALANCE MUM853-1 (EU) (6GK5853-2EA00-2DA1) (All versions < V8.2), SCALANCE MUM856-1 (A1) (6GK5856-2EA10-3AA1) (All versions < V8.2), SCALANCE MUM856-1 (B1) (6GK5856-2EA10-3BA1) (All versions < V8.2), SCALANCE MUM856-1 (CN) (6GK5856-2EA00-3FA1) (All versions < V8.2), SCALANCE MUM856-1 (EU) (6GK5856-2EA00-3DA1) (All versions < V8.2), SCALANCE MUM856-1 (RoW) (6GK5856-2EA00-3AA1) (All versions < V8.2), SCALANCE S615 EEC LAN-Router (6GK5615-0AA01-2AA2) (All versions < V8.2), SCALANCE S615 LAN-Router (6GK5615-0AA00-2AA2) (All versions < V8.2). Affected devices do not properly validate input in configuration fields of the iperf functionality. This could allow an unauthenticated remote attacker to execute arbitrary code on the device.

The olm_session_describe function in Matrix libolm before 3.2.7 is vulnerable to a buffer overflow. The Olm session object represents a cryptographic channel between two parties. Therefore, its state is partially controllable by the remote party of the channel. Attackers can construct a crafted sequence of messages to manipulate the state of the receiver's session in such a way that, for some buffer sizes, a buffer overflow happens on a call to olm_session_describe. Furthermore, safe buffer sizes were undocumented. The overflow content is partially controllable by the attacker and limited to ASCII spaces and digits. The known affected products are Element Web And SchildiChat Web.

The req package before 3.43.4 for Go may send an unintended request when a malformed URL is provided, because cleanHost in http.go intentionally uses a "garbage in, garbage out" design.

Commvault Edge Communication Service (cvd) prior to version 11 SP7 or version 11 SP6 with hotfix 590 is prone to a stack-based buffer overflow vulnerability that could lead to arbitrary code execution with administrative privileges.

It was discovered that the SteelCentral AppInternals Dynamic Sampling Agent's (DSA) AgentDiagnosticServlet has directory traversal vulnerability at the "/api/appInternals/1.0/agent/diagnostic/logs" API. The affected endpoint does not have any input validation of the user's input that allows a malicious payload to be injected.

An issue was discovered on Samsung mobile devices with L(5.0/5.1) and M(6.0) software. SVoice allows provider seizure via an application that uses a custom provider. The Samsung ID is SVE-2016-6942 (February 2017).

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, escalation of privileges is possible when `failure_mode_allow: true` is configured for `ext_authz` filter. For affected components that are used for logging and/or visibility, requests may not be logged by the receiving service. When Envoy was configured to use ext_authz, ext_proc, tap, ratelimit filters, and grpc access log service and an http header with non-UTF-8 data was received, Envoy would generate an invalid protobuf message and send it to the configured service. The receiving service would typically generate an error when decoding the protobuf message. For ext_authz that was configured with ``failure_mode_allow: true``, the request would have been allowed in this case. For the other services, this could have resulted in other unforeseen errors such as a lack of visibility into requests. As of versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, Envoy by default sanitizes the values sent in gRPC service calls to be valid UTF-8, replacing data that is not valid UTF-8 with a `!` character. This behavioral change can be temporarily reverted by setting runtime guard `envoy.reloadable_features.service_sanitize_non_utf8_strings` to false. As a workaround, one may set `failure_mode_allow: false` for `ext_authz`.

It was discovered that the SteelCentral AppInternals Dynamic Sampling Agent's (DSA) PluginServlet has directory traversal vulnerabilities at the "/api/appInternals/1.0/plugin/pmx" API. The affected endpoint does not have any input validation of the user's input that allows a malicious payload to be injected.

It was discovered that the SteelCentral AppInternals Dynamic Sampling Agent's (DSA) AgentConfigurationServlet has directory traversal vulnerabilities at the "/api/appInternals/1.0/agent/configuration" API. The affected endpoint does not have any input validation of the user's input that allows a malicious payload to be injected.

A SQLi vulnerability exists in Delta Electronics DIAEnergie v1.10.1.8610 and prior when CEBC.exe processes a 'RecalculateScript' message, which is splitted into 4 fields using the '~' character as the separator. An unauthenticated remote attacker can perform SQLi via the fourth field

An SQLi vulnerability exists in Delta Electronics DIAEnergie v1.10.1.8610 and prior when CEBC.exe processes a 'RecalculateHDMWYC' message, which is split into 4 fields using the '~' character as the separator. An unauthenticated remote attacker can perform SQLi via the fourth field.

Crocoblock JetEngine before 2.9.1 does not properly validate and sanitize form data.

http/impl/client/HttpClientBuilder.java in Apache HttpClient 4.3.x before 4.3.1 does not ensure that X509HostnameVerifier is not null, which allows attackers to have unspecified impact via vectors involving hostname verification.

A remote code execution (RCE) vulnerability exists in the Pi Camera project, version 1.0, maintained by RECANTHA. The issue arises from improper sanitization of user input passed to the "position" GET parameter in the tilt.php script. An attacker can exploit this by sending crafted input data that includes malicious command sequences, allowing arbitrary commands to be executed on the server with the privileges of the web server user. This vulnerability is exploitable remotely and poses significant risk if the application is exposed to untrusted networks.

There is an object injection vulnerability in swfupload plugin for wordpress.

An issue in Vypor Attack API System v.1.0 allows a remote attacker to execute arbitrary code via the user GET parameter.

A File Inclusion vulnerability exists in Zabbix 2.0.6 due to inadequate sanitization of request strings in CGI scripts, which could let a remote malicious user execute arbitrary code.

An eval() vulnerability exists in Python Software Foundation Djblets 0.7.21 and Beanbag Review Board before 1.7.15 when parsing JSON requests.

A flawed DNS rebinding protection issue was discovered in GitLab CE/EE 10.2 and later in the `url_blocker.rb` which could result in SSRF where the library is utilized.

In ACCEL-PPP (an implementation of PPTP/PPPoE/L2TP/SSTP), there is a buffer overflow when receiving an l2tp control packet ith an AVP which type is a string and no hidden flags, length set to less than 6. If your application is used in open networks or there are untrusted nodes in the network it is highly recommended to apply the patch. The problem was patched with commit 2324bcd5ba12cf28f47357a8f03cd41b7c04c52b As a workaround changes of commit 2324bcd5ba12cf28f47357a8f03cd41b7c04c52b can be applied to older versions.

An issue in RedisGraph v.2.12.10 allows an attacker to execute arbitrary code and cause a denial of service via a crafted string in DataBlock_ItemIsDeleted.

Crossbeam is a set of tools for concurrent programming. In crossbeam-channel before version 0.4.4, the bounded channel incorrectly assumes that `Vec::from_iter` has allocated capacity that same as the number of iterator elements. `Vec::from_iter` does not actually guarantee that and may allocate extra memory. The destructor of the `bounded` channel reconstructs `Vec` from the raw pointer based on the incorrect assumes described above. This is unsound and causing deallocation with the incorrect capacity when `Vec::from_iter` has allocated different sizes with the number of iterator elements. This has been fixed in crossbeam-channel 0.4.4.

Certain Lexmark devices through 2023-02-19 mishandle Input Validation (issue 4 of 4).

Iris 3.8 before build 1548, as used in Xpient point of sale (POS) systems, allows remote attackers to execute arbitrary commands via a crafted request to TCP port 7510, as demonstrated by opening the cash drawer.

Ruby PDFKit gem prior to 0.5.3 has a Code Execution Vulnerability

yum does not properly handle bad metadata, which allows an attacker to cause a denial of service and possibly have other unspecified impact via a Trojan horse file in the metadata of a remote repository.

Dolibarr ERP/CRM 3.3.1 does not properly validate user input in viewimage.php and barcode.lib.php which allows remote attackers to execute arbitrary commands.

Palo Alto Networks PAN-OS before 6.1.19, 7.0.x before 7.0.19, 7.1.x before 7.1.14, and 8.0.x before 8.0.6 allows remote attackers to execute arbitrary code via vectors involving the management interface.

All versions up to V81511329.1008 of ZTE ZXV10 B860A products are impacted by input validation vulnerability. Due to input validation, unauthorized users can take advantage of this vulnerability to control the user terminal system.

A flaw was found in Moodle in versions 3.11 to 3.11.3, 3.10 to 3.10.7, 3.9 to 3.9.10 and earlier unsupported versions. A remote code execution risk when restoring backup files was identified.

BabyGekko before 1.2.4 allows PHP file inclusion.

Windows Remote Desktop Licensing Service Spoofing Vulnerability

Exponent CMS before 2.6.0 has improper input validation in usersController.php.

In the Linux kernel before 3.4, a buffer overflow occurs in drivers/net/wireless/iwlwifi/iwl-agn-sta.c, which will cause at least memory corruption.

Controllers/InvitationsController.cs in QueryTree before 3.0.99-beta mishandles invitations.

A Code Execution vulnerability exists in the memcpy function when processing AMF requests in Ezhometech EzServer 7.0, which could let a remote malicious user execute arbitrary code or cause a Denial of Service