Stack-based buffer overflow vulnerability in the SonicOS HTTP server allows an authenticated remote attacker to cause Denial of Service (DoS) via sscanf function.

LBT T300-T390 v2.2.1.8 were discovered to contain a stack overflow via the ApCliSsid parameter in the generate_conf_router function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted POST request.

LBT T300-T390 v2.2.1.8 were discovered to contain a stack overflow via the ApCliSsid parameter in the makeCurRemoteApList function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted POST request.

Tenda AC18 V15.03.05.05 has a stack overflow vulnerability in the ssid parameter of form_fast_setting_wifi_set function.

Tenda AC1200 Router Model W15Ev2 V15.11.0.10(1576) was discovered to contain a stack overflow via the setWanPpoe function. This vulnerability allows attackers to cause a Denial of Service (DoS) via crafted overflow data.

In FasterXML jackson-databind before 2.13.4, resource exhaustion can occur because of a lack of a check in BeanDeserializer._deserializeFromArray to prevent use of deeply nested arrays. An application is vulnerable only with certain customized choices for deserialization.

In FasterXML jackson-databind before versions 2.13.4.1 and 2.12.17.1, resource exhaustion can occur because of a lack of a check in primitive value deserializers to avoid deep wrapper array nesting, when the UNWRAP_SINGLE_VALUE_ARRAYS feature is enabled.

When a BIG-IP PEM classification profile is configured on a UDP virtual server, undisclosed requests can cause the Traffic Management Microkernel (TMM) to terminate. This issue affects classification engines using signatures released between 09-08-2022 and 02-16-2023. See the table in the F5 Security Advisory for a complete list of affected classification signature files.  NOTE: Software versions which have reached End of Technical Support (EoTS) are not evaluated

Those using Woodstox to parse XML data may be vulnerable to Denial of Service attacks (DOS) if DTD support is enabled. If the parser is running on user supplied input, an attacker may supply content that causes the parser to crash by stackoverflow. This effect may support a denial of service attack.

Those using Jettison to parse untrusted XML or JSON data may be vulnerable to Denial of Service attacks (DOS). If the parser is running on user supplied input, an attacker may supply content that causes the parser to crash by stackoverflow. This effect may support a denial of service attack.

Tenda AC10 v4.0 firmware v16.03.10.20 was discovered to contain a stack overflow via the function get_parentControl_list_Info.

ABB is aware of vulnerabilities in the product versions listed below. An update is available that resolves the reported vulnerabilities in the product versions under maintenance. An attacker who successfully exploited one or more of these vulnerabilities could cause the product to stop or make the product inaccessible. Stack-based Buffer Overflow vulnerability in ABB Freelance controllers AC 700F (conroller modules), ABB Freelance controllers AC 900F (controller modules).This issue affects:  Freelance controllers AC 700F:  from 9.0;0 through V9.2 SP2, through Freelance 2013, through Freelance 2013SP1, through Freelance 2016, through Freelance 2016SP1, through Freelance 2019 , through Freelance 2019 SP1, through Freelance 2019 SP1 FP1;  Freelance controllers AC 900F:  through Freelance 2013, through Freelance 2013SP1, through Freelance 2016, through Freelance 2016SP1, through Freelance 2019, through Freelance 2019 SP1, through Freelance 2019 SP1 FP1.

Modbus Tools Modbus Slave (versions 7.4.2 and prior) is vulnerable to a stack-based buffer overflow in the registration field. This may cause the program to crash when a long character string is used.

Tenda AC10 V4.0si_V16.03.10.20 is vulnerable to Buffer Overflow in AdvSetMacMtuWan via cloneType2.

Those using Xstream to seralize XML data may be vulnerable to Denial of Service attacks (DOS). If the parser is running on user supplied input, an attacker may supply content that causes the parser to crash by stackoverflow. This effect may support a denial of service attack.

A vulnerability in bmcweb of OpenBMC Project allows user to cause denial of service. This vulnerability was identified during mitigation for CVE-2022-2809. When fuzzing the multipart_parser code using AFL++ with address sanitizer enabled to find smallest memory corruptions possible. It detected problem in how multipart_parser handles unclosed http headers. If long enough http header is passed in the multipart form without colon there is one byte overwrite on heap. It can be conducted multiple times in a loop to cause DoS.

The xmlBufAttrSerializeTxtContent function in xmlsave.c in libxml2 allows context-dependent attackers to cause a denial of service (out-of-bounds read and application crash) via a non-UTF-8 attribute value, related to serialization. NOTE: this vulnerability may be a duplicate of CVE-2016-3627.

A vulnerability in the Resource Reservation Protocol (RSVP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to a buffer overflow when processing crafted RSVP packets. An attacker could exploit this vulnerability by sending RSVP traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

A vulnerability in the IKEv1 fragmentation code of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a heap overflow, resulting in an affected device reloading. This vulnerability exists because crafted, fragmented IKEv1 packets are not properly reassembled. An attacker could exploit this vulnerability by sending crafted UDP packets to an affected system. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: Only traffic that is directed to the affected system can be used to exploit this vulnerability. This vulnerability can be triggered by IPv4 and IPv6 traffic.

In Modem, there is a possible system crash due to a logic error. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01412526; Issue ID: MSV-2018.

An issue in Clojure versions 1.20 to 1.12.0-alpha5 allows an attacker to cause a denial of service (DoS) via the clojure.core$partial$fn__5920 function.

A vulnerability was found in quickjs-ng QuickJS up to 0.8.0. It has been declared as problematic. Affected by this vulnerability is the function JS_GetRuntime of the file quickjs.c of the component qjs. The manipulation leads to stack-based buffer overflow. The attack can be launched remotely. Upgrading to version 0.9.0 is able to address this issue. The patch is named 99c02eb45170775a9a679c32b45dd4000ea67aff. It is recommended to upgrade the affected component.

vRealize Log Insight contains a deserialization vulnerability. An unauthenticated malicious actor can remotely trigger the deserialization of untrusted data which could result in a denial of service.

A stack-based buffer overflow in the built-in web server in Moxa NPort W2150A/W2250A Series firmware version 2.3 and prior allows a remote attacker to exploit the vulnerability by sending crafted payload to the web service. Successful exploitation of the vulnerability could result in denial of service.

A vulnerability, which was classified as critical, has been found in TP-Link VN020 F3v(T) TT_V6.2.1021. Affected by this issue is some unknown functionality of the component DHCP DISCOVER Packet Parser. The manipulation of the argument hostname leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A serialization vulnerability in logback receiver component part of logback version 1.4.11 allows an attacker to mount a Denial-Of-Service attack by sending poisoned data.

Vulnerability of serialization/deserialization mismatch in the vibration framework.Successful exploitation of this vulnerability may affect availability.

It may be possible to have an extremely long aggregation pipeline in conjunction with a specific stage/operator and cause a stack overflow due to the size of the stack frames used by that stage. If an attacker could cause such an aggregation to occur, they could maliciously crash MongoDB in a DoS attack. This vulnerability affects MongoDB Server v4.4 versions prior to and including 4.4.28, MongoDB Server v5.0 versions prior to 5.0.4 and MongoDB Server v4.2 versions prior to 4.2.16. Workaround: >= v4.2.16 users and all v4.4 users can add the --setParameter internalPipelineLengthLimit=50 instead of the default 1000 to mongod at startup to prevent a crash.

A memory corruption vulnerability exists in the web interface functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted HTTP POST request can lead to denial of service of the device's web interface. An attacker can send an unauthenticated HTTP POST request to trigger this vulnerability.

An issue in the box_deserialize_reusing function in openlink virtuoso-opensource v7.2.11 allows attackers to cause a Denial of Service (DoS) after running a SELECT statement.

By overlong input values an attacker may force overwrite of the internal program stack in SAP Web Dispatcher - versions 7.53, 7.77, 7.81, 7.85, 7.86, or Internet Communication Manager - versions KRNL64NUC 7.22, 7.22EXT, 7.49, KRNL64UC 7.22, 7.22EXT, 7.49, 7.53, KERNEL 7.22, 7.49, 7.53, 7.77, 7.81, 7.85, 7.86, which makes these programs unavailable, leading to denial of service.

EMQ X Broker versions prior to 4.2.8 are vulnerable to a denial of service attack as a result of excessive memory consumption due to the handling of untrusted inputs. These inputs cause the message broker to consume large amounts of memory, resulting in the application being terminated by the operating system.

In Point to MultiPoint (P2MP) scenarios within established sessions between network or adjacent neighbors the improper use of a source to destination copy write operation combined with a Stack-based Buffer Overflow on certain specific packets processed by the routing protocol daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved sent by a remote unauthenticated network attacker causes the RPD to crash causing a Denial of Service (DoS). Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS 19.2 versions prior to 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S2; 19.4 versions prior to 19.4R1-S4, 19.4R2-S4, 19.4R3-S3; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R2. This issue does not affect Juniper Networks Junos OS versions prior to 19.2R1. Juniper Networks Junos OS Evolved 20.1 versions prior to 20.1R3-EVO; 20.2 versions prior to 20.2R3-EVO; 20.3 versions prior to 20.3R2-EVO.

Zoom On-Premise Meeting Connector Zone Controller (ZC) before version 4.8.20220419.112 fails to properly parse STUN error codes, which can result in memory corruption and could allow a malicious actor to crash the application. In versions older than 4.8.12.20211115, this vulnerability could also be leveraged to execute arbitrary code.

A specially crafted communication packet sent to the affected systems could cause a denial-of-service condition due to improper deserialization. This issue affects: Mitsubishi Electric MC Works64 version 4.02C (10.95.208.31) and earlier, all versions; Mitsubishi Electric MC Works32 version 3.00A (9.50.255.02); ICONICS GenBroker64, Platform Services, Workbench, FrameWorX Server version 10.96 and prior; ICONICS GenBroker32 version 9.5 and prior.

A specially crafted communication packet sent to the affected device could cause a denial-of-service condition due to a deserialization vulnerability. This affects: Mitsubishi Electric MC Works64 Version 4.02C (10.95.208.31) and earlier, all versions; Mitsubishi Electric MC Works32 Version 3.00A (9.50.255.02); ICONICS GenBroker64, Platform Services, Workbench, FrameWorX Server v10.96 and prior; ICONICS GenBroker32 v9.5 and prior.

NDrive(1.2.2).sys in Naver Cloud Explorer has a stack-based buffer overflow, which allows attackers to cause a denial of service when reading data from IOCTL handle.

Triangle MicroWorks SCADA Data Gateway 3.02.0697 through 4.0.122, 2.41.0213 through 4.0.122 allows remote attackers cause a denial-of-service condition due to a lack of proper validation of the length of user-supplied data, prior to copying it to a fixed-length stack-based buffer. Authentication is not required to exploit this vulnerability.

A Stack-based Buffer Overflow issue was discovered in Emerson Process Management ControlWave Micro Process Automation Controller: ControlWave Micro [ProConOS v.4.01.280] firmware: CWM v.05.78.00 and prior. A stack-based buffer overflow vulnerability caused by sending crafted packets on Port 20547 could force the PLC to change its state into halt mode.

The package com.google.code.gson:gson before 2.8.9 are vulnerable to Deserialization of Untrusted Data via the writeReplace() method in internal classes, which may lead to DoS attacks.

PJSIP is a free and open source multimedia communication library written in C. Versions 2.12 and prior contain a stack buffer overflow vulnerability that affects PJSUA2 users or users that call the API `pjmedia_sdp_print(), pjmedia_sdp_media_print()`. Applications that do not use PJSUA2 and do not directly call `pjmedia_sdp_print()` or `pjmedia_sdp_media_print()` should not be affected. A patch is available on the `master` branch of the `pjsip/pjproject` GitHub repository. There are currently no known workarounds.

Stack-based Buffer Overflow vulnerability in ABB RMC-100, ABB RMC-100 LITE. When the REST interface is enabled by the user, and an attacker gains access to the control network, and CVE-2025-6074 is exploited, the attacker can use the JSON configuration to overflow the date of expiration field.This issue affects RMC-100: from 2105457-043 through 2105457-045; RMC-100 LITE: from 2106229-015 through 2106229-016.

Stack-based Buffer Overflow vulnerability in ABB RMC-100, ABB RMC-100 LITE. When the REST interface is enabled by the user, and an attacker gains access to the control network, and user/password broker authentication is enabled, and CVE-2025-6074 is exploited, the attacker can overflow the buffer for username or password. This issue affects RMC-100: from 2105457-043 through 2105457-045; RMC-100 LITE: from 2106229-015 through 2106229-016.

A flaw was found in libxml2's xmlBuildQName function, where integer overflows in buffer size calculations can lead to a stack-based buffer overflow. This issue can result in memory corruption or a denial of service when processing crafted input.

Tenda AC15 v15.03.05.19_multi_TD01 has a stack overflow via the list parameter in the fromSetIpMacBind function.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been declared as critical. Affected by this vulnerability is the function setSystemEmail of the file /setSystemEmail. The manipulation of the argument EmailSMTPPortNumber leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Tenda AC6 V15.03.06.23_multi is vulnerable to Buffer Overflow in the function formSetMacFilterCfg via the parameters macFilterType and deviceList.

A flaw was found in the mod_fcgid module of httpd. A malformed FastCGI response may result in a stack-based buffer overflow in the modules/fcgid/fcgid_bucket.c file in the fcgid_header_bucket_read() function, resulting in an application crash.

A buffer overflow vulnerability exists in libsndfile version 1.2.2 and potentially earlier versions when processing malformed IRCAM audio files. The vulnerability occurs in the ircam_read_header function at src/ircam.c:164 during sample rate processing, leading to memory corruption and potential code execution.

MaterialX is an open standard for the exchange of rich material and look-development content across applications and renderers. In versions 1.39.2 and below, when parsing an MTLX file with multiple nested nodegraph implementations, the MaterialX XML parsing logic can potentially crash due to stack exhaustion. An attacker could intentionally crash a target program that uses OpenEXR by sending a malicious MTLX file. This is fixed in version 1.39.3.