An issue in almando GmbH Almando Play APP (com.almando.play) 1.8.2 allows a remote attacker to obtain sensitive information via the firmware update process

FLIR thermal traffic cameras contain an unauthenticated device manipulation vulnerability in their WebSocket implementation that allows attackers to bypass authentication and authorization controls. Attackers can directly modify device configurations, access system information, and potentially initiate denial of service by sending crafted WebSocket messages without authentication.

FLIR AX8 Thermal Camera 1.32.16 contains an unauthenticated vulnerability that allows remote attackers to access live video streams without credentials. Attackers can directly connect to the RTSP stream using tools like VLC or FFmpeg to view and record thermal camera footage.

FLIR thermal traffic cameras contain an unauthenticated vulnerability that allows remote attackers to access live video streams without credentials. Attackers can directly retrieve video streams by accessing specific endpoints like /live.mjpeg, /snapshot.jpg, and RTSP streaming URLs without authentication.

An issue exists on NightOwl WDB-20-V2 WDB-20-V2_20190314 devices that allows an unauthenticated user to gain access to snapshots and video streams from the doorbell. The binary app offers a web server on port 80 that allows an unauthenticated user to take a snapshot from the doorbell camera via the /snapshot URI.

On Linksys E5350 WiFi Router with firmware version 1.0.00.037 and lower, (and potentially other vendors/devices due to code reuse), the /SysInfo.htm URI does not require a session ID. This web page calls a show_sysinfo function which retrieves WPA passwords, SSIDs, MAC Addresses, serial numbers, WPS Pins, and hardware/firmware versions, and prints this information into the web page. This web page is visible when remote management is enabled. A user who has access to the web interface of the device can extract these secrets. If the device has remote management enabled and is connected directly to the internet, this vulnerability is exploitable over the internet without interaction.

FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. An information disclosure vulnerability in FUXA allows an unauthenticated, remote attacker to retrieve sensitive administrative database credentials. Exploitation allows an unauthenticated, remote attacker to obtain the full system configuration, including administrative credentials for the InfluxDB database. Possession of these credentials may allow an attacker to authenticate directly to the database service, enabling them to read, modify, or delete all historical process data, or perform a Denial of Service by corrupting the database. This affects FUXA through version 1.2.9. This issue has been patched in FUXA version 1.2.10.

An issue was discovered in the A4N (Aremis 4 Nomad) application 1.5.0 for Android. It possesses an authentication mechanism; however, some features do not require any token or cookie in a request. Therefore, an attacker may send a simple HTTP request to the right endpoint, and obtain authorization to retrieve application data.

Missing Authentication for Critical Function vulnerability in NEC Corporation Aterm WG2600HS Ver.1.7.2 and earlier, WF1200CRS Ver.1.6.0 and earlier, WG1200CRS Ver.1.5.0 and earlier, GB1200PE Ver.1.3.0 and earlier, WG2600HP4 Ver.1.4.2 and earlier, WG2600HM4 Ver.1.4.2 and earlier, WG2600HS2 Ver.1.3.2 and earlier, WX3000HP Ver.2.4.2 and earlier and WX4200D5 Ver.1.2.4 and earlier allows a attacker to get a Wi-Fi password via the network.

An issue in Fermax Asia Pacific Pte Ltd com.fermax.vida 2.4.6 allows a remote attacker to obtain sensitve information via the firmware update process.

Statistics Database System developed by Gotac has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to directly exploit a specific functionality to query database contents.

A security issue exists within FactoryTalk Activation Manager. An error in the implementation of cryptography within the software could allow attackers to decrypt traffic. This could result in data exposure, session hijacking, or full communication compromise.

D-Link routers with the mydlink feature have some web interfaces without authentication requirements. An attacker can remotely obtain users' DNS query logs and login logs. Vulnerable targets include but are not limited to the latest firmware versions of DIR-817LW (A1-1.04), DIR-816L (B1-2.06), DIR-816 (B1-2.06?), DIR-850L (A1-1.09), and DIR-868L (A1-1.10).

Missing authentication for critical function vulnerability in the webapi component in Synology Drive Server before 3.0.4-12699, 3.2.1-23280, 3.5.0-26085 and 3.5.1-26102 allows remote attackers to obtain administrator credentials via unspecified vectors.

An issue in WoFit v.7.2.3 allows a remote attacker to obtain sensitive information via the firmware update process

LEDVANCE com.ledvance.smartplus.eu 2.1.10 allows a remote attacker to obtain sensitive information via the firmware update process.

An issue in Plug n Play Camera com.starvedia.mCamView.zwave 5.5.1 allows a remote attacker to obtain sensitive information via the firmware update process

An issue in Plug n Play Camera com.ezset.delaney 1.2.0 allows a remote attacker to obtain sensitive information via the firmware update process.

An issue in Shelly com.home.shelly 1.0.4 allows a remote attacker to obtain sensitive information via the firmware update process

Vivotek IP7137 camera with firmware version 0200a is vulnerable to an information disclosure issue where live camera footage can be accessed through the RTSP protocol on port 8554 without requiring authentication. This allows unauthorized users with network access to view the camera's feed, potentially compromising user privacy and security.  The vendor has not replied to the CNA. Possibly all firmware versions are affected. Since the product has met End-Of-Life phase, a fix is not expected to be released.

A vulnerability has been identified in SIMATIC MV540 H (All versions < V3.3), SIMATIC MV540 S (All versions < V3.3), SIMATIC MV550 H (All versions < V3.3), SIMATIC MV550 S (All versions < V3.3), SIMATIC MV560 U (All versions < V3.3), SIMATIC MV560 X (All versions < V3.3). Affected devices do not perform authentication for several web API endpoints. This could allow an unauthenticated remote attacker to read and download data from the device.

An authentication bypass vulnerability exists in Open-WebUI <=0.6.32 in the /api/config endpoint. The endpoint lacks proper authentication and authorization controls, exposing sensitive system configuration data to unauthenticated remote attackers.

Nacos is a platform designed for dynamic service discovery and configuration and service management. In Nacos before version 1.4.1, the ConfigOpsController lets the user perform management operations like querying the database or even wiping it out. While the /data/remove endpoint is properly protected with the @Secured annotation, the /derby endpoint is not protected and can be openly accessed by unauthenticated users. These endpoints are only valid when using embedded storage (derby DB) so this issue should not affect those installations using external storage (e.g. mysql)

HCL MyXalytics is affected by a failure to restrict URL access vulnerability. Unauthenticated users might gain unauthorized access to potentially confidential information, creating a risk of misuse, manipulation, or unauthorized distribution.

An issue was discovered on Samsung mobile devices with O(8.x) software. Access to Gallery in the Secure Folder can occur without authentication. The Samsung ID is SVE-2018-13057 (December 2018).

General Industrial Controls Lynx+ Gateway is missing critical authentication in the embedded web server which could allow an attacker to send GET requests to obtain sensitive device information.

In WhatsUp Gold versions released before 2023.1, an API endpoint was found to be missing an authentication mechanism. It is possible for an unauthenticated attacker to enumerate ancillary credential information stored within WhatsUp Gold.

SecGate3600, a network firewall product developed by NSFOCUS, contains a sensitive information disclosure vulnerability in the /cgi-bin/authUser/authManageSet.cgi endpoint. The affected component fails to enforce authentication checks on POST requests to retrieve user data. An unauthenticated remote attacker can exploit this flaw to obtain sensitive information, including user identifiers and configuration details, by sending crafted requests to the vulnerable endpoint. An affected version range is undefined. Exploitation evidence was first observed by the Shadowserver Foundation on 2024-06-18 UTC.

Screen SFT DAB 600/C Firmware 1.9.3 contains a weak session management vulnerability that allows attackers to bypass authentication controls by reusing IP-bound session identifiers. Attackers can exploit the vulnerable deviceManagement API endpoint to reset device configurations by sending crafted POST requests with manipulated session parameters.

Screen SFT DAB 600/C firmware 1.9.3 contains an authentication bypass vulnerability that allows attackers to change the admin password without requiring the current credentials. Attackers can exploit the userManager.cgx API endpoint by sending a crafted POST request with a new MD5-hashed password to directly modify the admin account's authentication.

D-Link DAP-1325 firmware version 1.01 contains a broken access control vulnerability that allows unauthenticated attackers to download device configuration settings without authentication. Attackers can exploit the /cgi-bin/ExportSettings.sh endpoint to retrieve sensitive configuration information by directly accessing the export settings script.

D-Link DSL-124 ME_1.00 contains a configuration file disclosure vulnerability that allows unauthenticated attackers to retrieve router settings through a POST request. Attackers can send a specific POST request to the router's configuration endpoint to download a complete backup file containing sensitive network credentials and system configurations.

Screen SFT DAB 600/C firmware 1.9.3 contains a session management vulnerability that allows attackers to bypass authentication controls by exploiting IP address session binding. Attackers can reuse the same IP address and issue unauthorized requests to the userManager API to change user passwords without proper authentication.

An information disclosure vulnerability exists in the OAS Engine SecureBrowseFile functionality of Open Automation Software OAS Platform V16.00.0112. A specially-crafted network request can lead to a disclosure of sensitive information. An attacker can send a network request to trigger this vulnerability.

Piwigo v12.2.0 was discovered to contain an information leak via the action parameter in /admin/maintenance_actions.php.

TerraMaster NAS 4.2.29 and earlier allows remote attackers to discover the administrative password by sending "User-Agent: TNAS" to module/api.php?mobile/webNasIPS and then reading the PWD field in the response.

Free5gc v3.2.1 is vulnerable to Information disclosure.

An unauthenticated attacker with access to the local network of the medical office can query an unprotected Fast Healthcare Interoperability Resources (FHIR) API to get access to sensitive electronic health records (EHR).

MachineSense devices use unauthenticated MQTT messaging to monitor devices and remote viewing of sensor data by users.

An authentication bypass vulnerability was identified in SMM/SMM2 and FPC that could allow an authenticated user to execute certain IPMI calls that could lead to exposure of limited system information.

An issue was discovered in litmusautomation litmus-mcp-server thru 0.0.1 allowing unauthorized attackers to control the target's MCP service through the SSE protocol.

Mattermost versions <11 fail to enforce multi-factor authentication on WebSocket connections which allows unauthenticated users to access sensitive information via WebSocket events

Insecure permissions in the component /api/admin/user of 14Finger v1.1 allows attackers to access all user information via a crafted GET request.

Information disclosure: The main configuration, including users and their hashed passwords, is exposed by an unprotected web server resource and can be accessed without authentication. Additionally, device details are exposed which include the serial number and the firmware version by another unprotected web server resource.

A missing authentication for critical function in Fortinet FortiPortal version 6.0.0 through 6.0.15, FortiManager version 7.4.0 through 7.4.2, 7.2.0 through 7.2.5, 7.0.0 through 7.0.12, 6.4.0 through 6.4.14 allows attacker to access to the configuration of the managed devices by sending specifically crafted packets

The vCenter Server contains an information disclosure vulnerability due to an unauthenticated appliance management API. A malicious actor with network access to port 443 on vCenter Server may exploit this issue to gain access to sensitive information.

Broadcom RAID Controller Web server (nginx) is serving private files without any authentication

A missing authentication for critical function vulnerability in the client application of Soar Cloud HRD Human Resource Management System through version 7.3.2025.0408 allows remote attackers to bypass authentication and access application functions.

D-Link DWL-900AP+ Access Point 2.1 and 2.2 allows remote attackers to access the TFTP server without authentication and read the config.img file, which contains sensitive information such as the administrative password, the WEP encryption keys, and network configuration information.

The issue was addressed with additional permissions checks. This issue is fixed in macOS Ventura 13.6.1. An attacker may be able to access passkeys without authentication.