SunGrow WiNet-SV200.001.00.P027 and earlier versions is vulnerable to stack-based buffer overflow when parsing MQTT messages, due to missing MQTT topic bounds checks.

SunGrow WiNet-SV200.001.00.P027 and earlier versions is vulnerable to heap-based buffer overflow due to bounds checks of the MQTT message content.

SunGrow iSolarCloud Android application V2.1.6.20241017 and prior contains hardcoded credentials. The application (regardless of the user account) and the cloud uses the same MQTT credentials for exchanging the device telemetry.

Advantech WebAccess versions 9.02 and prior are vulnerable to a stack-based buffer overflow, which may allow an attacker to remotely execute code.

A vulnerability was found in lwIP up to 2.2.1. Affected is the function snmp_parse_inbound_frame of the file src/apps/snmp/snmp_msg.c of the component snmpv3 USM Handler. Performing a manipulation of the argument msgAuthenticationParameters results in stack-based buffer overflow. The attack may be initiated remotely. The patch is named 0c957ec03054eb6c8205e9c9d1d05d90ada3898c. It is suggested to install a patch to address this issue.

Stack-based Buffer Overflow vulnerability in Shenzhen Tenda Technology Co Tenda AC6V2 (fromWizardHandle modules) allows Overflow Buffers.This issue affects Tenda AC6V2: through 15.03.06.50.

The SCRAM code in PgBouncer before 1.25.2 did not check the return value of strlcat() correctly when building the contents of the SCRAM client-final-message. A malicious backend that sends a SCRAM server-final-message with a long nonce can trigger a stack overflow.

Stack-based Buffer Overflow vulnerability in Shenzhen Tenda Technology Co Tenda AC6V2 (setDoubleL2tpConfig->guest_ip_check(overflow arg: mask) modules) allows Overflow Buffers.This issue affects Tenda AC6V2: through 15.03.06.50

MailGates/MailAudit developed by Openfind has a Stack-based Buffer Overflow vulnerability, allowing unauthenticated remote attackers to control the program's execution flow and execute arbitrary code.

A vulnerability was detected in D-Link DIR-816 1.10CNB05. Affected by this vulnerability is an unknown functionality of the file /goform/form2Wl5BasicSetup.cgi of the component goahead. Performing a manipulation of the argument pskValue results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A weakness has been identified in Tenda AC8 up to 16.03.50.11. This vulnerability affects the function doSystemCmd of the file /goform/SysToolChangePwd of the component HTTP Endpoint. This manipulation of the argument local_2c causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks.

A security vulnerability has been detected in D-Link DIR-816 1.10CNB05. Affected is an unknown function of the file /goform/form2WlanBasicSetup.cgi of the component goahead. Such manipulation of the argument pskValue leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was detected in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This vulnerability affects the function cgi_myfavorite_del_user/cgi_myfavorite_verify of the file /cgi-bin/gui_mgr.cgi. Performing a manipulation results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used.

A weakness has been identified in LB-LINK BL-WR9000 2.4.9. The affected element is the function sub_44E8D0 of the file /goform/get_virtual_cfg. Executing a manipulation can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in D-Link DIR-816 1.10CNB05. This impacts an unknown function of the file /goform/form2Wl5RepeaterStep2.cgi of the component goahead. This manipulation of the argument key1/key2/key3/key4/pskValue causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

A stack-based buffer overflow in mangle_to_hex_lower() and mangle_to_hex_upper() in src/rp_cpu.c in hashcat v7.1.2 allows an attacker to cause a denial of service or possibly execute arbitrary code via a crafted rule file, or via the -j or -k rule options used with password candidates of 128 or more characters. The vulnerability is caused by a bounds check that fails to account for the 2x expansion that occurs when password bytes are converted to hexadecimal.

An unauthenticated attacker can trigger a stack based buffer overflow in the DP Service (TCP port 3500). This vulnerability has been resolved in firmware version 2.800.0000000.8.R.20241111.

Stack-based Buffer Overflow vulnerability in cachekey plugin of Apache Traffic Server. This issue affects Apache Traffic Server 7.0.0 to 7.1.12, 8.0.0 to 8.1.1, 9.0.0 to 9.0.1.

arduino-esp32 is an Arduino core for the ESP32, ESP32-S2, ESP32-S3, ESP32-C3, ESP32-C6 and ESP32-H2 microcontrollers. Prior to 3.3.8, the WebServer multipart form parser in arduino-esp32 allocates a Variable Length Array (VLA) on the stack whose size is derived from an attacker-controlled HTTP header field (Content-Type: multipart/form-data; boundary=...) without enforcing any length limit. Sending a boundary string longer than ~8000 characters overflows the 8192-byte task stack of the loopTask, causing a crash and potential remote code execution. This vulnerability is fixed in 3.3.8.

A vulnerability in the Universal Plug-and-Play (UPnP) service of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of incoming UPnP traffic. An attacker could exploit this vulnerability by sending a crafted UPnP request to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a DoS condition. Cisco has not released software updates that address this vulnerability.

Buffer overflow vulnerability in cannelloni v2.0.0 in CAN frame parsing in parser.cpp in function parseCANFrame, and decoder.cpp in function decodeFrame allowing remote attackers to cause a denial of service (crash) or possibly execute arbitrary code via crafted CAN FD frames.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link TL-WA1201 1.0.1 Build 20200709 rel.66244(5553) wireless access points. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DNS responses. A crafted DNS message can trigger an overflow of a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-14656.

A security flaw has been discovered in Tenda AC15 up to 15.13.07.13. Affected by this issue is some unknown functionality of the file /goform/TextEditingConversion. The manipulation of the argument wpapsk_crypto2_4g results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks.

CVE-2026-33447 is a buffer overflow in a message parsing function of the Secure Access client prior to 14.50. Attackers with control of a modified server can send a special packet that can overwrite a small portion of memory conceivably leading to memory corruption or denial of service.

The affected product is vulnerable to a stack-based buffer overflow, which may allow an attacker to remotely execute arbitrary code on the WebAccess/SCADA (WebAccess/SCADA versions prior to 8.4.5, WebAccess/SCADA versions prior to 9.0.1).

Annke N48PBB (Network Video Recorder) products of version 3.4.106 build 200422 and prior are vulnerable to a stack-based buffer overflow, which allows an unauthorized remote attacker to execute arbitrary code with the same privileges as the server user (root).

OpenWrt Project is a Linux operating system targeting embedded devices. In versions prior to 24.10.6 and 25.12.1, the mdns daemon has a Stack-based Buffer Overflow vulnerability in the parse_question function. The issue is triggered by PTR queries for reverse DNS domains (.in-addr.arpa and .ip6.arpa). DNS packets received on UDP port 5353 are expanded by dn_expand into an 8096-byte global buffer (name_buffer), which is then copied via an unbounded strcpy into a fixed 256-byte stack buffer when handling TYPE_PTR queries. The overflow is possible because dn_expand converts non-printable ASCII bytes (e.g., 0x01) into multi-character octal representations (e.g., \001), significantly inflating the expanded name beyond the stack buffer's capacity. A crafted DNS packet can exploit this expansion behavior to overflow the stack buffer, making the vulnerability reachable through normal multicast DNS packet processing. This issue has been fixed in versions 24.10.6 and 25.12.1.

Five buffer overflows in the built-in web server in Moxa NPort IAW5000A-I/O series firmware version 2.2 or earlier may allow a remote attacker to initiate a denial-of-service attack and execute arbitrary code.

OpenWrt Project is a Linux operating system targeting embedded devices. In versions prior to 24.10.6 and 25.12.1, the mdns daemon has a Stack-based Buffer Overflow vulnerability in the match_ipv6_addresses function, triggered when processing PTR queries for IPv6 reverse DNS domains (.ip6.arpa) received via multicast DNS on UDP port 5353. During processing, the domain name from name_buffer is copied via strcpy into a fixed 256-byte stack buffer, and then the reverse IPv6 request is extracted into a buffer of only 46 bytes (INET6_ADDRSTRLEN). Because the length of the data is never validated before this extraction, an attacker can supply input larger than 46 bytes, causing an out-of-bounds write. This allows a specially crafted DNS query to overflow the stack buffer in match_ipv6_addresses, potentially enabling remote code execution. This issue has been fixed in versions 24.10.6 and 25.12.1.

A memory corruption vulnerability exists in Palo Alto Networks GlobalProtect portal and gateway interfaces that enables an unauthenticated network-based attacker to disrupt system processes and potentially execute arbitrary code with root privileges. The attacker must have network access to the GlobalProtect interface to exploit this issue. This issue impacts PAN-OS 8.1 versions earlier than PAN-OS 8.1.17. Prisma Access customers are not impacted by this issue.

A security vulnerability has been detected in Totolink NR1800X 9.1.0u.6279_B20210910. The impacted element is the function find_host_ip of the component lighttpd. Such manipulation of the argument Host leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used.

Dell PowerProtect Data Domain with Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.6, LTS2025 release version 8.3.1.0 through 8.3.1.10, LTS2024 release versions 7.13.1.0 through 7.13.1.60, contain a stack-based Buffer Overflow vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution.

FATEK Automation Communication Server Versions 1.13 and prior lacks proper validation of user-supplied data, which could result in a stack-based buffer overflow condition and allow an attacker to remotely execute code.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a stack buffer overflow occurs when processing the an attribute in msl.c. A long value overflows a fixed-size stack buffer, leading to memory corruption. Versions 7.1.2-15 and 6.9.13-40 contain a patch.

In GnuPG before 2.5.17, a crafted CMS (S/MIME) EnvelopedData message carrying an oversized wrapped session key can cause a stack-based buffer overflow in gpg-agent during PKDECRYPT--kem=CMS handling. This can easily be leveraged for denial of service; however, there is also memory corruption that could lead to remote code execution.

Stack-based Buffer Overflow vulnerability in SimTech Systems, Inc. ThinkWise allows Remote Code Inclusion.This issue affects ThinkWise: from 7 through 23.

The affected product is vulnerable to a stack-based buffer overflow. An unauthenticated attacker could send a malicious HTTP request that the webserver fails to properly check input size before copying data to the stack, potentially allowing remote code execution.

A security vulnerability has been detected in EFM ipTIME NAS1dual 1.5.24. This issue affects the function get_csrf_whites of the file /cgi/advanced/misc_main.cgi. Such manipulation leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Tenda WH450 1.0.0.18. This impacts an unknown function of the file /goform/wirelessRestart of the component HTTP Request Handler. The manipulation of the argument GO results in stack-based buffer overflow. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks.

GStreamer is a library for constructing graphs of media-handling components. A stack-buffer overflow has been detected in the `vorbis_handle_identification_packet` function within `gstvorbisdec.c`. The position array is a stack-allocated buffer of size 64. If vd->vi.channels exceeds 64, the for loop will write beyond the boundaries of the position array. The value written will always be `GST_AUDIO_CHANNEL_POSITION_NONE`. This vulnerability allows someone to overwrite the EIP address allocated in the stack. Additionally, this bug can overwrite the `GstAudioInfo` info structure. This vulnerability is fixed in 1.24.10.

A stack-based buffer overflow vulnerability in Advantech WebAccess Versions 9.02 and prior caused by a lack of proper validation of the length of user-supplied data may allow remote code execution.

A stack-based buffer overflow vulnerability has been reported to affect QNAP NAS devices running Surveillance Station. If exploited, this vulnerability allows attackers to execute arbitrary code. QNAP have already fixed this vulnerability in the following versions: Surveillance Station 5.1.5.4.3 (and later) for ARM CPU NAS (64bit OS) and x86 CPU NAS (64bit OS) Surveillance Station 5.1.5.3.3 (and later) for ARM CPU NAS (32bit OS) and x86 CPU NAS (32bit OS)

GStreamer is a library for constructing graphs of media-handling components. stack-buffer overflow has been detected in the gst_opus_dec_parse_header function within `gstopusdec.c'. The pos array is a stack-allocated buffer of size 64. If n_channels exceeds 64, the for loop will write beyond the boundaries of the pos array. The value written will always be GST_AUDIO_CHANNEL_POSITION_NONE. This bug allows to overwrite the EIP address allocated in the stack. This vulnerability is fixed in 1.24.10.

Tenda O6 V3.0 firmware V1.0.0.7(2054) contains a stack overflow vulnerability in the formexeCommand function.

An issue was discovered in Mbed TLS 3.6 before 3.6.1. A stack buffer overflow in mbedtls_ecdsa_der_to_raw() and mbedtls_ecdsa_raw_to_der() can occur when the bits parameter is larger than the largest supported curve. In some configurations with PSA disabled, all values of bits are affected. (This never happens in internal library calls, but can affect applications that call these functions directly.)

The HTTPD binary in multiple ZTE routers has a stack-based buffer overflow vulnerability in check_data_integrity function. This function is responsible for validating the checksum of data in post request. The checksum is sent encrypted in the request, the function decrypts it and stores the checksum on the stack without validating it. An unauthenticated attacker can get RCE as root by exploiting this vulnerability.

The web service of certain models of D-Link wireless routers contains a Stack-based Buffer Overflow vulnerability, which allows unauthenticated remote attackers to exploit this vulnerability to execute arbitrary code on the device.

The HTTPD binary in multiple ZTE routers has a stack-based buffer overflow vulnerability in webPrivateDecrypt function. This function is responsible for decrypting RSA encrypted ciphertext, the encrypted data is supplied base64 encoded. The decoded ciphertext is stored on the stack without checking its length. An unauthenticated attacker can get RCE as root by exploiting this vulnerability.

A stack-based buffer overflow issue was discovered in the phddns client in Blu-Castle BCUM221E 1.0.0P220507 via the password field.

Command injection and multiple stack-based buffer overflows vulnerabilities in the Login_handler_func function of spx_restservice allow an attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.