Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.5 and 6.0.19, a small amount of HTTP/2 traffic can lead to Suricata using a large amount of memory. The issue has been addressed in Suricata 7.0.5 and 6.0.19. Workarounds include disabling the HTTP/2 parser and reducing `app-layer.protocols.http2.max-table-size` value (default is 65536).

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.3, excessive memory use during pgsql parsing could lead to OOM-related crashes. This vulnerability is patched in 7.0.3. As workaround, users can disable the pgsql app layer parser.

Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. In versions 7.0.10 and below and 8.0.0-beta1 through 8.0.0-rc1, mishandling of data on HTTP2 stream 0 can lead to uncontrolled memory usage, leading to loss of visibility. Workarounds include disabling the HTTP/2 parser, and using a signature like drop http2 any any -> any any (frame:http2.hdr; byte_test:1,=,0,3; byte_test:4,=,0,5; sid: 1;) where the first byte test tests the HTTP2 frame type DATA and the second tests the stream id 0. This is fixed in versions 7.0.11 and 8.0.0.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. A memory allocation failure due to `http.memcap` being reached leads to a NULL-ptr reference leading to a crash. Upgrade to 7.0.6.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Suricata can run out of memory when parsing crafted HTTP/2 traffic. Upgrade to 6.0.20 or 7.0.6.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Crafted modbus traffic can lead to unlimited resource accumulation within a flow. Upgrade to 7.0.6. Set a limited stream.reassembly.depth to reduce the issue.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine developed by the OISF and the Suricata community. When parsing an overly long SSH banner, Suricata can use excessive CPU resources, as well as cause excessive logging volume in alert records. This issue has been patched in versions 6.0.17 and 7.0.4.

LibHTP is a security-aware parser for the HTTP protocol and the related bits and pieces. Version 0.5.46 may parse malformed request traffic, leading to excessive CPU usage. Version 0.5.47 contains a patch for the issue. No known workarounds are available.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to versions 6.0.16 and 7.0.3, an attacker can craft traffic to cause Suricata to use far more CPU and memory for processing the traffic than needed, which can lead to extreme slow downs and denial of service. This vulnerability is patched in 6.0.16 or 7.0.3. Workarounds include disabling the affected protocol app-layer parser in the yaml and reducing the `stream.reassembly.depth` value helps reduce the severity of the issue.

LibHTP is a security-aware parser for the HTTP protocol. Crafted traffic can cause excessive processing time of HTTP headers, leading to denial of service. This issue is addressed in 0.5.46.

Suricata before 5.0.7 and 6.x before 6.0.3 has a "critical evasion."

libhtp 0.5.15 allows remote attackers to cause a denial of service (NULL pointer dereference).

A buffer over-read issue was discovered in Suricata 4.1.x before 4.1.4. If the input of the decode-mpls.c function DecodeMPLS is composed only of a packet of source address and destination address plus the correct type field and the right number for shim, an attacker can manipulate the control flow, such that the condition to leave the loop is true. After leaving the loop, the network packet has a length of 2 bytes. There is no validation of this length. Later on, the code tries to read at an empty position, leading to a crash.

LibHTP is a security-aware parser for the HTTP protocol and its related bits and pieces. In versions 0.5.50 and below, there is a traffic-induced memory leak that can starve the process of memory, leading to loss of visibility. To workaround this issue, set `suricata.yaml app-layer.protocols.http.libhtp.default-config.lzma-enabled` to false. This issue is fixed in version 0.5.51.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.7, rules using datasets with the non-functional / unimplemented "unset" option can trigger an assertion during traffic parsing, leading to denial of service. This issue is addressed in 7.0.7. As a workaround, use only trusted and well tested rulesets.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.8, a specially crafted TCP stream can lead to a very large buffer overflow while being zero-filled during initialization with memset due to an unsigned integer underflow. The issue has been addressed in Suricata 7.0.8.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.7, invalid ALPN in TLS/QUIC traffic when JA4 matching/logging is enabled can lead to Suricata aborting with a panic. This issue has been addressed in 7.0.7. One may disable ja4 as a workaround.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.8, DNS resource name compression can lead to small DNS messages containing very large hostnames which can be costly to decode, and lead to very large DNS log records. While there are limits in place, they were too generous. The issue has been addressed in Suricata 7.0.8.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.7, missing initialization of the random seed for "thash" leads to byte-range tracking having predictable hash table behavior. This can lead to an attacker forcing lots of data into a single hash bucket, leading to severe performance degradation. This issue has been addressed in 7.0.7.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.7, missing initialization of the random seed for "thash" leads to datasets having predictable hash table behavior. This can lead to dataset file loading to use excessive time to load, as well as runtime performance issues during traffic handling. This issue has been addressed in 7.0.7. As a workaround, avoid loading datasets from untrusted sources. Avoid dataset rules that track traffic in rules.

LibHTP is a security-aware parser for the HTTP protocol and the related bits and pieces. Prior to version 0.5.49, unbounded processing of HTTP request and response headers can lead to excessive CPU time and memory utilization, possibly leading to extreme slowdowns. This issue is addressed in 0.5.49.

go-libp2p is the offical libp2p implementation in the Go programming language. Version `0.18.0` and older of go-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limits has been part of go-libp2p, this component was designed to handle the regular churn of peers, not a targeted resource exhaustion attack. Users are advised to upgrade their version of go-libp2p to version `0.18.1` or newer. Users unable to upgrade may consult the denial of service (dos) mitigation page for more information on how to incorporate mitigation strategies, monitor your application, and respond to attacks.

BAB TECHNOLOGIE GmbH eibPort V3 prior to 3.8.3 devices allow denial of service (Uncontrolled Resource Consumption) via requests to the lighttpd component.

An issue was discovered in ONOS 2.5.1. The purge-requested intent remains on the list, but it does not respond to changes in topology (e.g., link failure). In combination with other applications, it could lead to a failure of network management.

An Uncontrolled Resource Consumption vulnerability in the H.323 ALG (Application Layer Gateway) of  Juniper Networks Junos OS on SRX Series and MX Series with SPC3 and MS-MPC/MIC, allows an unauthenticated network-based attacker to send specific packets causing traffic loss leading to Denial of Service (DoS).  Continued receipt and processing of these specific packets will sustain the Denial of Service condition. The memory usage can be monitored using the below command.   user@host> show usp memory segment sha data objcache jsf  This issue affects SRX Series and MX Series with SPC3 and MS-MPC/MIC:  *  20.4 before 20.4R3-S10,  *  21.2 before 21.2R3-S6,  *  21.3 before 21.3R3-S5,  *  21.4 before 21.4R3-S6,  *  22.1 before 22.1R3-S4,  *  22.2 before 22.2R3-S2,  *  22.3 before 22.3R3-S1,  *  22.4 before 22.4R3,  *  23.2 before 23.2R2.

The ethernet-lldp component in Cisco IOS 12.2 before 12.2(33)SXJ1 does not properly support a large number of LLDP Management Address (MA) TLVs, which allows remote attackers to cause a denial of service (device crash) via crafted LLDPDUs, aka Bug ID CSCtj22354.

Traefik (pronounced traffic) is a modern HTTP reverse proxy and load balancer for deploying microservices. There is a vulnerability in Go when parsing the HTTP headers, which impacts Traefik. HTTP header parsing could allocate substantially more memory than required to hold the parsed headers. This behavior could be exploited to cause a denial of service. This issue has been patched in versions 2.9.10 and 2.10.0-rc2.

The vCenter Server contains a denial-of-service vulnerability in VPXD service. A malicious actor with network access to port 443 on vCenter Server may exploit this issue to create a denial of service condition due to excessive memory consumption by VPXD service.

Next.js is a React framework. A Denial of Service (DoS) condition was identified in Next.js. Exploitation of the bug can trigger a crash, affecting the availability of the server. his vulnerability was resolved in Next.js 13.5 and later.

Tensorflow is an Open Source Machine Learning Framework. The `GraphDef` format in TensorFlow does not allow self recursive functions. The runtime assumes that this invariant is satisfied. However, a `GraphDef` containing a fragment such as the following can be consumed when loading a `SavedModel`. This would result in a stack overflow during execution as resolving each `NodeDef` means resolving the function itself and its nodes. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range.

The package node-opcua before 2.74.0 are vulnerable to Denial of Service (DoS) when bypassing the limitations for excessive memory consumption by sending multiple CloseSession requests with the deleteSubscription parameter equal to False.

An issue discovered in H3C Magic R365 and H3C Magic R100 routers allows attackers to hijack TCP sessions which could lead to a denial of service.

Tenda FH1201 v1.2.0.14 (408) was discovered to contain a stack overflow via the PPPOEPassword parameter in the fromAdvSetWan function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted POST request.

DHCP Server Service Denial of Service Vulnerability

Windows Online Certificate Status Protocol (OCSP) Server Denial of Service Vulnerability

Windows Online Certificate Status Protocol (OCSP) Server Denial of Service Vulnerability

.NET and Visual Studio Denial of Service Vulnerability

A flaw was found in GLib. GVariant deserialization fails to validate that the input conforms to the expected format, leading to denial of service.

A regular expression used in Apache MXNet (incubating) is vulnerable to a potential denial-of-service by excessive resource consumption. The bug could be exploited when loading a model in Apache MXNet that has a specially crafted operator name that would cause the regular expression evaluation to use excessive resources to attempt a match. This issue affects Apache MXNet versions prior to 1.9.1.

Dell SmartFabric OS10 Software, versions 10.5.6.x, 10.5.5.x, 10.5.4.x,10.5.3.x, contains an Uncontrolled Resource Consumption vulnerability. A remote unauthenticated host could potentially exploit this vulnerability leading to a denial of service.

An issue in OneFlow-Inc. Oneflow v0.9.1 allows attackers to cause a Denial of Service (DoS) when an empty array is processed with oneflow.dot.

Zoho ManageEngine ADSelfService Plus before 6218 allows anyone to conduct a Denial-of-Service attack via the Mobile App Authentication API.

Skyport Daemon (skyportd) is the daemon for the Skyport Panel. By making thousands of folders & files (easy due to skyport's lack of rate limiting on createFolder. createFile), skyportd in a lot of cases will cause 100% CPU usage and an OOM, probably crashing the system. This is fixed in 0.2.2.

The socket implementation in net/core/sock.c in the Linux kernel before 2.6.34 does not properly manage a backlog of received packets, which allows remote attackers to cause a denial of service (memory consumption) by sending a large amount of network traffic, as demonstrated by netperf UDP tests.

Helm is a tool for managing Charts, pre-configured Kubernetes resources. Versions prior to 3.10.3 are subject to Uncontrolled Resource Consumption, resulting in Denial of Service. Input to functions in the _strvals_ package can cause a stack overflow. In Go, a stack overflow cannot be recovered from. Applications that use functions from the _strvals_ package in the Helm SDK can have a Denial of Service attack when they use this package and it panics. This issue has been patched in 3.10.3. SDK users can validate strings supplied by users won't create large arrays causing significant memory usage before passing them to the _strvals_ functions.

The socket implementation in net/core/sock.c in the Linux kernel before 2.6.35 does not properly manage a backlog of received packets, which allows remote attackers to cause a denial of service by sending a large amount of network traffic, related to the sk_add_backlog function and the sk_rmem_alloc socket field. NOTE: this vulnerability exists because of an incomplete fix for CVE-2010-4251.

libp2p-rust is the official rust language Implementation of the libp2p networking stack. In versions prior to 0.45.1 an attacker node can cause a victim node to allocate a large number of small memory chunks, which can ultimately lead to the victim’s process running out of memory and thus getting killed by its operating system. When executed continuously, this can lead to a denial of service attack, especially relevant on a larger scale when run against more than one node of a libp2p based network. Users are advised to upgrade to `libp2p` `v0.45.1` or above. Users unable to upgrade should reference the DoS Mitigation page for more information on how to incorporate mitigation strategies, monitor their application, and respond to attacks: https://docs.libp2p.io/reference/dos-mitigation/.

A vulnerability was identified in the kjd/idna library, specifically within the `idna.encode()` function, affecting version 3.6. The issue arises from the function's handling of crafted input strings, which can lead to quadratic complexity and consequently, a denial of service condition. This vulnerability is triggered by a crafted input that causes the `idna.encode()` function to process the input with considerable computational load, significantly increasing the processing time in a quadratic manner relative to the input size.

A design flaw in all versions of Go-Ethereum allows an attacker node to send 5120 pending transactions of a high gas price from one account that all fully spend the full balance of the account to a victim Geth node, which can purge all of pending transactions in a victim node's memory pool and then occupy the memory pool to prevent new transactions from entering the pool, resulting in a denial of service (DoS).

Fortra Globalscape EFT versions before 8.1.0.16 suffer from a denial of service vulnerability, where a compressed message that decompresses to itself can cause infinite recursion and crash the service