Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Suricata can run out of memory when parsing crafted HTTP/2 traffic. Upgrade to 6.0.20 or 7.0.6.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.5 and 6.0.19, a small amount of HTTP/2 traffic can lead to Suricata using a large amount of memory. The issue has been addressed in Suricata 7.0.5 and 6.0.19. Workarounds include disabling the HTTP/2 parser and reducing `app-layer.protocols.http2.max-table-size` value (default is 65536).

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine developed by the OISF and the Suricata community. When parsing an overly long SSH banner, Suricata can use excessive CPU resources, as well as cause excessive logging volume in alert records. This issue has been patched in versions 6.0.17 and 7.0.4.

LibHTP is a security-aware parser for the HTTP protocol and the related bits and pieces. Version 0.5.46 may parse malformed request traffic, leading to excessive CPU usage. Version 0.5.47 contains a patch for the issue. No known workarounds are available.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to versions 6.0.16 and 7.0.3, an attacker can craft traffic to cause Suricata to use far more CPU and memory for processing the traffic than needed, which can lead to extreme slow downs and denial of service. This vulnerability is patched in 6.0.16 or 7.0.3. Workarounds include disabling the affected protocol app-layer parser in the yaml and reducing the `stream.reassembly.depth` value helps reduce the severity of the issue.

LibHTP is a security-aware parser for the HTTP protocol. Crafted traffic can cause excessive processing time of HTTP headers, leading to denial of service. This issue is addressed in 0.5.46.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.3, excessive memory use during pgsql parsing could lead to OOM-related crashes. This vulnerability is patched in 7.0.3. As workaround, users can disable the pgsql app layer parser.

Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. In versions 7.0.10 and below and 8.0.0-beta1 through 8.0.0-rc1, mishandling of data on HTTP2 stream 0 can lead to uncontrolled memory usage, leading to loss of visibility. Workarounds include disabling the HTTP/2 parser, and using a signature like drop http2 any any -> any any (frame:http2.hdr; byte_test:1,=,0,3; byte_test:4,=,0,5; sid: 1;) where the first byte test tests the HTTP2 frame type DATA and the second tests the stream id 0. This is fixed in versions 7.0.11 and 8.0.0.

LibHTP is a security-aware parser for the HTTP protocol and the related bits and pieces. Prior to version 0.5.49, unbounded processing of HTTP request and response headers can lead to excessive CPU time and memory utilization, possibly leading to extreme slowdowns. This issue is addressed in 0.5.49.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. A memory allocation failure due to `http.memcap` being reached leads to a NULL-ptr reference leading to a crash. Upgrade to 7.0.6.

Suricata before 5.0.7 and 6.x before 6.0.3 has a "critical evasion."

libhtp 0.5.15 allows remote attackers to cause a denial of service (NULL pointer dereference).

A buffer over-read issue was discovered in Suricata 4.1.x before 4.1.4. If the input of the decode-mpls.c function DecodeMPLS is composed only of a packet of source address and destination address plus the correct type field and the right number for shim, an attacker can manipulate the control flow, such that the condition to leave the loop is true. After leaving the loop, the network packet has a length of 2 bytes. There is no validation of this length. Later on, the code tries to read at an empty position, leading to a crash.

LibHTP is a security-aware parser for the HTTP protocol and its related bits and pieces. In versions 0.5.50 and below, there is a traffic-induced memory leak that can starve the process of memory, leading to loss of visibility. To workaround this issue, set `suricata.yaml app-layer.protocols.http.libhtp.default-config.lzma-enabled` to false. This issue is fixed in version 0.5.51.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.7, rules using datasets with the non-functional / unimplemented "unset" option can trigger an assertion during traffic parsing, leading to denial of service. This issue is addressed in 7.0.7. As a workaround, use only trusted and well tested rulesets.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.8, a specially crafted TCP stream can lead to a very large buffer overflow while being zero-filled during initialization with memset due to an unsigned integer underflow. The issue has been addressed in Suricata 7.0.8.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.8, a large input buffer to the to_lowercase, to_uppercase, strip_whitespace, compress_whitespace, dotprefix, header_lowercase, strip_pseudo_headers, url_decode, or xor transform can lead to a stack overflow causing Suricata to crash. The issue has been addressed in Suricata 7.0.8.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.7, invalid ALPN in TLS/QUIC traffic when JA4 matching/logging is enabled can lead to Suricata aborting with a panic. This issue has been addressed in 7.0.7. One may disable ja4 as a workaround.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.8, DNS resource name compression can lead to small DNS messages containing very large hostnames which can be costly to decode, and lead to very large DNS log records. While there are limits in place, they were too generous. The issue has been addressed in Suricata 7.0.8.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.7, missing initialization of the random seed for "thash" leads to byte-range tracking having predictable hash table behavior. This can lead to an attacker forcing lots of data into a single hash bucket, leading to severe performance degradation. This issue has been addressed in 7.0.7.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.7, missing initialization of the random seed for "thash" leads to datasets having predictable hash table behavior. This can lead to dataset file loading to use excessive time to load, as well as runtime performance issues during traffic handling. This issue has been addressed in 7.0.7. As a workaround, avoid loading datasets from untrusted sources. Avoid dataset rules that track traffic in rules.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. The bytes setting in the decode_base64 keyword is not properly limited. Due to this, signatures using the keyword and setting can cause large memory allocations of up to 4 GiB per thread. This vulnerability is fixed in 7.0.9.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Datasets declared in rules have an option to specify the `hashsize` to use. This size setting isn't properly limited, so the hash table allocation can be large. Untrusted rules can lead to large memory allocations, potentially leading to denial of service due to resource starvation. This vulnerability is fixed in 7.0.9.

go-libp2p is the offical libp2p implementation in the Go programming language. Version `0.18.0` and older of go-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limits has been part of go-libp2p, this component was designed to handle the regular churn of peers, not a targeted resource exhaustion attack. Users are advised to upgrade their version of go-libp2p to version `0.18.1` or newer. Users unable to upgrade may consult the denial of service (dos) mitigation page for more information on how to incorporate mitigation strategies, monitor your application, and respond to attacks.

There is a resource management error vulnerability in eCNS280_TD V100R005C10SPC650. An attacker needs to perform specific operations to exploit the vulnerability on the affected device. Due to improper resource management of the function, the vulnerability can be exploited to cause service abnormal on affected devices.

Etherpad < 1.8.3 is affected by a missing lock check which could cause a denial of service. Aggressively targeting random pad import endpoints with empty data would flatten all pads due to lack of rate limiting and missing ownership check.

In Apache ActiveMQ Artemis prior to 2.20.0 or 2.19.1, an attacker could partially disrupt availability (DoS) through uncontrolled resource consumption of memory.

All versions of package asneg/opcuastack are vulnerable to Denial of Service (DoS) due to a missing limitation on the number of received chunks - per single session or in total for all concurrent sessions. An attacker can exploit this vulnerability by sending an unlimited number of huge chunks (e.g. 2GB each) without sending the Final closing chunk.

nptd-rs is a tool for synchronizing your computer's clock, implementing the NTP and NTS protocols. There is a missing limit for accepted NTS-KE connections. This allows an unauthenticated remote attacker to crash ntpd-rs when an NTS-KE server is configured. Non NTS-KE server configurations, such as the default ntpd-rs configuration, are unaffected. This vulnerability has been patched in version 1.1.3.

gorilla/schema converts structs to and from form values. Prior to version 1.4.1 Running `schema.Decoder.Decode()` on a struct that has a field of type `[]struct{...}` opens it up to malicious attacks regarding memory allocations, taking advantage of the sparse slice functionality. Any use of `schema.Decoder.Decode()` on a struct with arrays of other structs could be vulnerable to this memory exhaustion vulnerability. Version 1.4.1 contains a patch for the issue.

An issue was discovered in ebankIT before 7. A Denial-of-Service attack is possible through the GET parameter EStatementsIds located on the /Controls/Generic/EBMK/Handlers/EStatements/DownloadEStatement.ashx endpoint. The GET parameter accepts over 100 comma-separated e-statement IDs without throwing an error. When this many IDs are supplied, the server takes around 60 seconds to respond and successfully generate the expected ZIP archive (during this time period, no other pages load). A threat actor could issue a request to this endpoint with 100+ statement IDs every 30 seconds, potentially resulting in an overload of the server for all users.

In api.rb in Sidekiq before 5.2.10 and 6.4.0, there is no limit on the number of days when requesting stats for the graph. This overloads the system, affecting the Web UI, and makes it unavailable to users.

Helm is a tool for managing Charts, pre-configured Kubernetes resources. Versions prior to 3.10.3 are subject to Uncontrolled Resource Consumption, resulting in Denial of Service. Input to functions in the _strvals_ package can cause a stack overflow. In Go, a stack overflow cannot be recovered from. Applications that use functions from the _strvals_ package in the Helm SDK can have a Denial of Service attack when they use this package and it panics. This issue has been patched in 3.10.3. SDK users can validate strings supplied by users won't create large arrays causing significant memory usage before passing them to the _strvals_ functions.

Similarly to CVE-2024-34055, Apache James is vulnerable to denial of service through the abuse of IMAP literals from both authenticated and unauthenticated users, which could be used to cause unbounded memory allocation and very long computations Version 3.7.6 and 3.8.2 restrict such illegitimate use of IMAP literals.

libp2p-rust is the official rust language Implementation of the libp2p networking stack. In versions prior to 0.45.1 an attacker node can cause a victim node to allocate a large number of small memory chunks, which can ultimately lead to the victim’s process running out of memory and thus getting killed by its operating system. When executed continuously, this can lead to a denial of service attack, especially relevant on a larger scale when run against more than one node of a libp2p based network. Users are advised to upgrade to `libp2p` `v0.45.1` or above. Users unable to upgrade should reference the DoS Mitigation page for more information on how to incorporate mitigation strategies, monitor their application, and respond to attacks: https://docs.libp2p.io/reference/dos-mitigation/.

Synapse is an open-source Matrix homeserver. Synapse versions before 1.106 are vulnerable to a disk fill attack, where an unauthenticated adversary can induce Synapse to download and cache large amounts of remote media. The default rate limit strategy is insufficient to mitigate this. This can lead to a denial of service, ranging from further media uploads/downloads failing to completely unavailability of the Synapse process, depending on how Synapse was deployed. Synapse 1.106 introduces a new "leaky bucket" rate limit on remote media downloads to reduce the amount of data a user can request at a time. This does not fully address the issue, but does limit an unauthenticated user's ability to request large amounts of data to be cached.

In lunary-ai/lunary version 1.2.7, there is a lack of rate limiting on the forgot password page, leading to an email bombing vulnerability. Attackers can exploit this by automating forgot password requests to flood targeted user accounts with a high volume of password reset emails. This not only overwhelms the victim's mailbox, making it difficult to manage and locate legitimate emails, but also significantly impacts mail servers by consuming their resources. The increased load can cause performance degradation and, in severe cases, make the mail servers unresponsive or unavailable, disrupting email services for the entire organization.

Sengled Dimmer Switch V0.0.9 contains a denial of service (DOS) vulnerability, which allows a remote attacker to send malicious Zigbee messages to a vulnerable device and cause crashes. After receiving the malicious command, the device will keep reporting its status and finally drain its battery after receiving the 'Set_short_poll_interval' command.

A vulnerability in SonicOS CFS (Content filtering service) returns a large 403 forbidden HTTP response message to the source address when users try to access prohibited resource this allows an attacker to cause HTTP Denial of Service (DoS) attack

ImageSharp is a 2D graphics API. A vulnerability discovered in the ImageSharp library, where the processing of specially crafted files can lead to excessive memory usage in the Gif decoder. The vulnerability is triggered when ImageSharp attempts to process image files that are designed to exploit this flaw. All users are advised to upgrade to v3.1.5 or v2.1.9.

In JetBrains TeamCity before 2024.03.2 server was susceptible to DoS attacks with incorrect auth tokens

Uncontrolled resource consumption refers to a software vulnerability where a attacker or system uses excessive resources, such as CPU, memory, or network bandwidth, without proper limitations or controls. This can cause a denial-of-service (DoS) attack or degrade the performance of the affected system.

An excessive memory use issue (CWE-770) exists in Email-MIME, before version 1.954, which can cause denial of service when parsing multipart MIME messages. The patch set (from 2020 and 2024) limits excessive depth and the total number of parts.

Pexip Infinity before 27.0 has improper WebRTC input validation. An unauthenticated remote attacker can use excessive resources, temporarily causing denial of service.

Trustwave ModSecurity 3.0.5 through 3.0.8 before 3.0.9 allows a denial of service (worker crash and unresponsiveness) because some inputs cause a segfault in the Transaction class for some configurations.

Any request send to a Netgear Nighthawk Wifi6 Router (RAX30)'s web service containing a “Content-Type” of “multipartboundary=” will result in the request body being written to “/tmp/mulipartFile” on the device itself. A sufficiently large file will cause device resources to be exhausted, resulting in the device becoming unusable until it is rebooted.

The crewjam/saml go library contains a partial implementation of the SAML standard in golang. Prior to version 0.4.13, the package's use of `flate.NewReader` does not limit the size of the input. The user can pass more than 1 MB of data in the HTTP request to the processing functions, which will be decompressed server-side using the Deflate algorithm. Therefore, after repeating the same request multiple times, it is possible to achieve a reliable crash since the operating system kills the process. This issue is patched in version 0.4.13.

`silverstripe/graphql` serves Silverstripe data as GraphQL representations. In versions 4.2.2 and 4.1.1, an attacker could use a specially crafted graphql query to execute a denial of service attack against a website which has a publicly exposed graphql endpoint. This mostly affects websites with particularly large/complex graphql schemas. Users should upgrade to `silverstripe/graphql` 4.2.3 or 4.1.2 to remedy the vulnerability.

A vulnerability has been identified where a maliciously crafted message containing a specific chain of characters can cause the chat to enter a hot loop on one of the processes, consuming ~120% CPU and rendering the service unresponsive.

Every `named` instance configured to run as a recursive resolver maintains a cache database holding the responses to the queries it has recently sent to authoritative servers. The size limit for that cache database can be configured using the `max-cache-size` statement in the configuration file; it defaults to 90% of the total amount of memory available on the host. When the size of the cache reaches 7/8 of the configured limit, a cache-cleaning algorithm starts to remove expired and/or least-recently used RRsets from the cache, to keep memory use below the configured limit. It has been discovered that the effectiveness of the cache-cleaning algorithm used in `named` can be severely diminished by querying the resolver for specific RRsets in a certain order, effectively allowing the configured `max-cache-size` limit to be significantly exceeded. This issue affects BIND 9 versions 9.11.0 through 9.16.41, 9.18.0 through 9.18.15, 9.19.0 through 9.19.13, 9.11.3-S1 through 9.16.41-S1, and 9.18.11-S1 through 9.18.15-S1.