Under certain circumstances, invalid authentication credentials could be sent to the login endpoint of Johnson Controls Metasys NAE55, SNE, and SNC engines prior to versions 11.0.6 and 12.0.4 and Facility Explorer F4-SNC engines prior to versions 11.0.6 and 12.0.4 to cause denial-of-service.

Logstash versions before 7.4.1 and 6.8.4 contain a denial of service flaw in the Logstash Beats input plugin. An unauthenticated user who is able to connect to the port the Logstash beats input could send a specially crafted network packet that would cause Logstash to stop responding.

An exploitable Denial of Service vulnerability exists in the API daemon of Circle with Disney running firmware 2.0.1. A large amount of simultaneous TCP connections causes the APID daemon to repeatedly fork, causing the daemon to run out of memory and trigger a device reboot. An attacker needs network connectivity to the device to trigger this vulnerability.

The vulnerabilities can be exploited to cause the web visualization component of the PLC to stop and not respond, leading to genuine users losing remote visibility of the PLC state. If a user attempts to login to the PLC while this vulnerability is exploited, the PLC will show an error state and refuse connections to Automation Builder. The execution of the PLC application is not affected by this vulnerability. This issue affects ABB AC500 V2 products with onboard Ethernet.

A vulnerability in the processing of SSH connections of Cisco Firepower Management Center (FMC) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper error handling when an SSH session fails to be established. An attacker could exploit this vulnerability by sending a high rate of crafted SSH connections to the instance. A successful exploit could allow the attacker to cause resource exhaustion, resulting in a reboot on the affected device.

An issue was discovered in MediaWiki before 1.35.5, 1.36.x before 1.36.3, and 1.37.x before 1.37.1. A denial of service (resource consumption) can be accomplished by searching for a very long key in a Language Name Search.

When a POST request comes through AJP and the request exceeds the max-post-size limit (maxEntitySize), Undertow's AjpServerRequestConduit implementation closes a connection without sending any response to the client/proxy. This behavior results in that a front-end proxy marking the backend worker (application server) as an error state and not forward requests to the worker for a while. In mod_cluster, this continues until the next STATUS request (10 seconds intervals) from the application server updates the server state. So, in the worst case, it can result in "All workers are in error state" and mod_cluster responds "503 Service Unavailable" for a while (up to 10 seconds). In mod_proxy_balancer, it does not forward requests to the worker until the "retry" timeout passes. However, luckily, mod_proxy_balancer has "forcerecovery" setting (On by default; this parameter can force the immediate recovery of all workers without considering the retry parameter of the workers if all workers of a balancer are in error state.). So, unlike mod_cluster, mod_proxy_balancer does not result in responding "503 Service Unavailable". An attacker could use this behavior to send a malicious request and trigger server errors, resulting in DoS (denial of service). This flaw was fixed in Undertow 2.2.19.Final, Undertow 2.3.0.Alpha2.

Discourse is an open source platform for community discussion. A malicious request can cause production log files to quickly fill up and thus result in the server running out of disk space. This problem has been patched in the 3.1.1 stable and 3.2.0.beta2 versions of Discourse. It is possible to temporarily work around this problem by reducing the `client_max_body_size nginx directive`. `client_max_body_size` will limit the size of uploads that can be uploaded directly to the server.

Minder's `HandleGithubWebhook` is susceptible to a denial of service attack from an untrusted HTTP request. The vulnerability exists before the request has been validated, and as such the request is still untrusted at the point of failure. This allows an attacker with the ability to send requests to `HandleGithubWebhook` to crash the Minder controlplane and deny other users from using it. This vulnerability is fixed in 0.0.48.

The O-RAN E2T I-Release Prometheus metric Increment function can crash in sctpThread.cpp for message.peerInfo->counters[IN_INITI][MSG_COUNTER][ProcedureCode_id_E2setup]->Increment().

Keep-alive HTTP and HTTPS connections can remain open and inactive for up to 2 minutes in Node.js 6.16.0 and earlier. Node.js 8.0.0 introduced a dedicated server.keepAliveTimeout which defaults to 5 seconds. The behavior in Node.js 6.16.0 and earlier is a potential Denial of Service (DoS) attack vector. Node.js 6.17.0 introduces server.keepAliveTimeout and the 5-second default.

The DNS protocol in RFC 1035 and updates allows remote attackers to cause a denial of service (resource consumption) by arranging for DNS queries to be accumulated for seconds, such that responses are later sent in a pulsing burst (which can be considered traffic amplification in some cases), aka the "DNSBomb" issue.

net/http in Go before 1.16.12 and 1.17.x before 1.17.5 allows uncontrolled memory consumption in the header canonicalization cache via HTTP/2 requests.

Microsoft w3wp (aka w3wp.exe) does not properly handle when the AspCompat directive is not used when referencing COM components in ASP.NET, which allows remote attackers to cause a denial of service (resource consumption or crash) by repeatedly requesting each of several documents that refer to COM components, or are restricted documents located under the ASP.NET application path.

Uncontrolled Resource Consumption in GitHub repository causefx/organizr prior to 2.1.2000. This vulnerability can be abused by doing a DDoS attack for which genuine users will not able to access resources/applications.

An issue in Yonganda YAD-LOJ V3.0.561 allows a remote attacker to cause a denial of service via a crafted packet.

NLTK (Natural Language Toolkit) is a suite of open source Python modules, data sets, and tutorials supporting research and development in Natural Language Processing. Versions prior to 3.6.5 are vulnerable to regular expression denial of service (ReDoS) attacks. The vulnerability is present in PunktSentenceTokenizer, sent_tokenize and word_tokenize. Any users of this class, or these two functions, are vulnerable to the ReDoS attack. In short, a specifically crafted long input to any of these vulnerable functions will cause them to take a significant amount of execution time. If your program relies on any of the vulnerable functions for tokenizing unpredictable user input, then we would strongly recommend upgrading to a version of NLTK without the vulnerability. For users unable to upgrade the execution time can be bounded by limiting the maximum length of an input to any of the vulnerable functions. Our recommendation is to implement such a limit.

An issue was discovered in Schneider Electric Conext ComBox, model 865-1058, all firmware versions prior to V3.03 BN 830. A series of rapid requests to the device may cause it to reboot.

A denial of service flaw was found in the way the server component of Freeciv before 2.3.4 processed certain packets. A remote attacker could send a specially-crafted packet that, when processed would lead to memory exhaustion or excessive CPU consumption.

A vulnerability has been identified in SINAMICS PERFECT HARMONY GH180 with NXG I control, MLFBs: 6SR2...-, 6SR3...-, 6SR4...- (All Versions with option G28), SINAMICS PERFECT HARMONY GH180 with NXG II control, MLFBs: 6SR2...-, 6SR3...-, 6SR4...- (All Versions with option G28). A denial of service vulnerability exists in the affected products. The vulnerability could be exploited by an attacker with network access to the device. Successful exploitation requires no privileges and no user interaction. An attacker could use the vulnerability to compromise availability of the affected system. At the time of advisory publication no public exploitation of this security vulnerability was known.

A Resource Exhaustion issue was discovered in Schneider Electric Modicon M340 PLC BMXNOC0401, BMXNOE0100, BMXNOE0110, BMXNOE0110H, BMXNOR0200H, BMXP341000, BMXP342000, BMXP3420102, BMXP3420102CL, BMXP342020, BMXP342020H, BMXP342030, BMXP3420302, BMXP3420302H, and BMXP342030H. A remote attacker could send a specially crafted set of packets to the PLC causing it to freeze, requiring the operator to physically press the reset button on the PLC in order to recover.

Mitsubishi Electric Q03/04/06/13/26UDVCPU: serial number 20081 and prior, Q04/06/13/26UDPVCPU: serial number 20081 and prior, and Q03UDECPU, Q04/06/10/13/20/26/50/100UDEHCPU: serial number 20101 and prior. A remote attacker can send specific bytes over Port 5007 that will result in an Ethernet stack crash and disruption to USB communication.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.5 and 6.0.19, a small amount of HTTP/2 traffic can lead to Suricata using a large amount of memory. The issue has been addressed in Suricata 7.0.5 and 6.0.19. Workarounds include disabling the HTTP/2 parser and reducing `app-layer.protocols.http2.max-table-size` value (default is 65536).

Remote prevention of access to cellular service with no user interaction (for example, crashing the cellular radio service with a malformed packet)

Two four letter word commands "wchp/wchc" are CPU intensive and could cause spike of CPU utilization on Apache ZooKeeper server if abused, which leads to the server unable to serve legitimate client requests. Apache ZooKeeper thru version 3.4.9 and 3.5.2 suffer from this issue, fixed in 3.4.10, 3.5.3, and later.

On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.1.0-13.1.1.5, 12.1.0-12.1.4.1, and 11.5.1-11.6.5, under certain conditions, TMM may consume excessive resources when processing traffic for a Virtual Server with the FIX (Financial Information eXchange) profile applied.

With pipelining enabled each incoming query on a TCP connection requires a similar resource allocation to a query received via UDP or via TCP without pipelining enabled. A client using a TCP-pipelined connection to a server could consume more resources than the server has been provisioned to handle. When a TCP connection with a large number of pipelined queries is closed, the load on the server releasing these multiple resources can cause it to become unresponsive, even for queries that can be answered authoritatively or from cache. (This is most likely to be perceived as an intermittent server problem).

On BIG-IP 14.1.0-14.1.2, 14.0.0-14.0.1, and 13.1.0-13.1.1, undisclosed HTTP requests may consume excessive amounts of systems resources which may lead to a denial of service.

There is a NULL pointer dereference vulnerability in VTK before 9.2.5, and it lies in IO/Infovis/vtkXMLTreeReader.cxx. The vendor didn't check the return value of libxml2 API 'xmlDocGetRootElement', and try to dereference it. It is unsafe as the return value can be NULL and that NULL pointer dereference may crash the application.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. FreeSWITCH prior to version 1.10.7 is susceptible to Denial of Service via SIP flooding. When flooding FreeSWITCH with SIP messages, it was observed that after a number of seconds the process was killed by the operating system due to memory exhaustion. By abusing this vulnerability, an attacker is able to crash any FreeSWITCH instance by flooding it with SIP messages, leading to Denial of Service. The attack does not require authentication and can be carried out over UDP, TCP or TLS. This issue was patched in version 1.10.7.

When the BIG-IP APM 14.1.0-14.1.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.4.1, or 11.5.1-11.6.5 system processes certain requests, the APD/APMD daemon may consume excessive resources.

modern-async is an open source JavaScript tooling library for asynchronous operations using async/await and promises. In affected versions a bug affecting two of the functions in this library: forEachSeries and forEachLimit. They should limit the concurrency of some actions but, in practice, they don't. Any code calling these functions will be written thinking they would limit the concurrency but they won't. This could lead to potential security issues in other projects. The problem has been patched in 1.0.4. There is no workaround.

A uncontrolled resource consumption in Fortinet FortiWeb version 6.4.1 and below, 6.3.15 and below allows an unauthenticated attacker to make the httpsd daemon unresponsive via huge HTTP packets

Wire-server is the system server for the wire back-end services. Releases prior to v2022-03-01 are subject to a denial of service attack via a crafted object causing a hash collision. This collision causes the server to spend at least quadratic time parsing it which can lead to a denial of service for a heavily used server. The issue has been fixed in wire-server 2022-03-01 and is already deployed on all Wire managed services. On premise instances of wire-server need to be updated to 2022-03-01, so that their backends are no longer affected. There are no known workarounds for this issue.

The LevelOne WBR-6012 router with firmware R0.40e6 is vulnerable to improper resource allocation within its web application, where a series of crafted HTTP requests can cause a reboot. This could lead to network service interruptions.

On versions 15.0.0-15.0.1.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, 13.1.0-13.1.3.2, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, BIG-IP virtual servers with Loose Initiation enabled on a FastL4 profile may be subject to excessive flow usage under undisclosed conditions.

A vulnerability was found in Radare2 in versions prior to 5.6.2, 5.6.0, 5.5.4 and 5.5.2. Mapping a huge section filled with zeros of an ELF64 binary for MIPS architecture can lead to uncontrolled resource consumption and DoS.

A vulnerability in SSL/TLS message handler for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because incoming SSL/TLS packets are not properly processed. An attacker could exploit this vulnerability by sending a crafted SSL/TLS packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

FON2601E-SE, FON2601E-RE, FON2601E-FSW-S, and FON2601E-FSW-B with firmware versions 1.1.7 and earlier contain an issue where they may behave as open resolvers. If this vulnerability is exploited, FON routers may be leveraged for DNS amplification attacks to some other entities.

The DynamicPageList3 extension is a reporting tool for MediaWiki, listing category members and intersections with various formats and details. In affected versions unsanitised input of regular expression date within the parameters of the DPL parser function, allowed for the possibility of ReDoS (Regex Denial of Service). This has been resolved in version 3.3.6. If you are unable to update you may also set `$wgDplSettings['functionalRichness'] = 0;` or disable DynamicPageList3 to mitigate.

OpenTelemetry, also known as OTel for short, is a vendor-neutral open-source Observability framework for instrumenting, generating, collecting, and exporting telemetry data such as traces, metrics, logs. Autoinstrumentation out of the box adds the label `http_method` that has unbound cardinality. It leads to the server's potential memory exhaustion when many malicious requests are sent. HTTP method for requests can be easily set by an attacker to be random and long. In order to be affected program has to be instrumented for HTTP handlers and does not filter any unknown HTTP methods on the level of CDN, LB, previous middleware, etc. This issue has been patched in version 0.41b0.

A flaw was found in Undertow. A potential security issue in flow control handling by the browser over HTTP/2 may cause overhead or a denial of service in the server. This flaw exists because of an incomplete fix for CVE-2021-3629.

There is a possible denial of service vulnerability in Action View (Rails) <5.2.2.1, <5.1.6.2, <5.0.7.2, <4.2.11.1 where specially crafted accept headers can cause action view to consume 100% cpu and make the server unresponsive.

Fluentd collects events from various data sources and writes them to files to help unify logging infrastructure. The parser_apache2 plugin in Fluentd v0.14.14 to v1.14.1 suffers from a regular expression denial of service (ReDoS) vulnerability. A broken apache log with a certain pattern of string can spend too much time in a regular expression, resulting in the potential for a DoS attack. This issue is patched in version 1.14.2 There are two workarounds available. Either don't use parser_apache2 for parsing logs (which cannot guarantee generated by Apache), or put patched version of parser_apache2.rb into /etc/fluent/plugin directory (or any other directories specified by the environment variable `FLUENT_PLUGIN` or `--plugin` option of fluentd).

An attacker, opening a HTTP/2 connection with an initial window size of 0, was able to block handling of that connection indefinitely in Apache HTTP Server. This could be used to exhaust worker resources in the server, similar to the well known "slow loris" attack pattern. This has been fixed in version 2.4.58, so that such connection are terminated properly after the configured connection timeout. This issue affects Apache HTTP Server: from 2.4.55 through 2.4.57. Users are recommended to upgrade to version 2.4.58, which fixes the issue.

A vulnerability in the logging configuration of Secure Sockets Layer (SSL) policies for Cisco FirePOWER System Software 5.3.0 through 6.2.2 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high consumption of system resources. The vulnerability is due to the logging of certain TCP packets by the affected software. An attacker could exploit this vulnerability by sending a flood of crafted TCP packets to an affected device. A successful exploit could allow the attacker to cause a DoS condition. The success of an exploit is dependent on how an administrator has configured logging for SSL policies for a device. This vulnerability affects Cisco FirePOWER System Software that is configured to log connections by using SSL policy default actions. Cisco Bug IDs: CSCvd07072.

OctoRPKI does not limit the depth of a certificate chain, allowing for a CA to create children in an ad-hoc fashion, thereby making tree traversal never end.

In OpenBMC 2.9, crafted IPMI messages allow an attacker to cause a denial of service to the BMC via the netipmid (IPMI lan+) interface.

An issue was discovered in Iglu Server 0.13.0 and below. It involves sending very large payloads to a particular API endpoint of Iglu Server and can render it completely unresponsive. If the operation of Iglu Server is not restored, event processing in the pipeline would eventually halt.