TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the NetDiagHost parameter in the setNetworkDiag function.

TOTOLink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability.

TOTOLINK T8 V4.1.5cu was discovered to contain a command injection vulnerability via the slaveIpList parameter in the function setUpgradeFW.

TOTOlink A7100RU(V7.4cu.2313_B20191024) was discovered to contain a command injection vulnerability via the city parameter at setting/delStaticDhcpRules.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the admuser parameter in the setPasswordCfg function.

A command injection vulnerability in the serverIp parameter in the function updateWifiInfo of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.

A command injection vulnerability in the version parameter in the function recvSlaveCloudCheckStatus of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.

TOTOlink A7100RU(V7.4cu.2313_B20191024) was discovered to contain a command injection vulnerability via the country parameter at setting/delStaticDhcpRules.

Command Injection vulnerability in D-Link Dir 816 with firmware version DIR-816_A2_v1.10CNB04 allows attackers to run arbitrary commands via the urlAdd parameter.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the host_time parameter in the NTPSyncWithHost function.

A command injection vulnerability in the serverIp parameter in the function meshSlaveDlfw of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.

A command injection vulnerability in the ip parameter in the function recvSlaveUpgstatus of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.

A vulnerability has been found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6 and classified as critical. This vulnerability affects unknown code of the component Web Management Interface. The manipulation of the argument ecn-down leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-227650 is the identifier assigned to this vulnerability.

A vulnerability was found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the component Web Management Interface. The manipulation of the argument name leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-227653 was assigned to this vulnerability.

A vulnerability was found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. It has been classified as critical. Affected is an unknown function of the component Web Management Interface. The manipulation of the argument dpi leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-227652.

Certain Tenda products are vulnerable to command injection. This affects Tenda CP7 Tenda CP7<=V11.10.00.2211041403 and Tenda CP3 v.10 Tenda CP3 v.10<=V20220906024_2025 and Tenda IT7-PCS Tenda IT7-PCS<=V2209020914 and Tenda IT7-LCS Tenda IT7-LCS<=V2209020914 and Tenda IT7-PRS Tenda IT7-PRS<=V2209020908.

In Pluck-4.7.10-dev2 admin background, a remote command execution vulnerability exists when uploading files.

Advanced Secure Gateway and Content Analysis, prior to 7.3.13.1 / 3.1.6.0, may be susceptible to a Command Injection vulnerability.

A vulnerability, which was classified as critical, was found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. This affects an unknown part of the component Web Management Interface. The manipulation of the argument ecn-up leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-227649 was assigned to this vulnerability.

In IBOS 4.5.4 Open, the database backup has Command Injection Vulnerability.

A vulnerability was found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6 and classified as critical. This issue affects some unknown processing of the component Web Management Interface. The manipulation of the argument src leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-227651.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in Apache Software Foundation Apache Airflow, Apache Software Foundation Apache Airflow MySQL Provider.This issue affects Apache Airflow: before 2.5.1; Apache Airflow MySQL Provider: before 4.0.0.

DEK-1705 <=Firmware:34.23.1 device was discovered to have a command execution vulnerability.

There is a command injection vulnerability in SolarView Compact through 6.00, attackers can execute commands by bypassing internal restrictions through downloader.php.

A vulnerability was found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. It has been rated as critical. Affected by this issue is some unknown functionality of the component Web Management Interface. The manipulation of the argument suffix-rate-up leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-227654 is the identifier assigned to this vulnerability.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

Ghidra/RuntimeScripts/Linux/support/launch.sh in NSA Ghidra through 10.2.2 passes user-provided input into eval, leading to command injection when calling analyzeHeadless with untrusted input.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been classified as critical. This affects the function RP_checkCredentialsByBBS of the file /goform/RP_checkCredentialsByBBS. The manipulation of the argument pwd leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users to the administration panel to perform authenticated remote code execution. An issue exists in ngpsystemcmd.php in which the http parameters "x_modules" and "y_modules" are not properly handled. The NDN-210 is part of Barco TransForm N solution and this vulnerability is patched from TransForm N version 3.8 onwards.

The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users to the administration panel to perform authenticated remote code execution. An issue exists in split_card_cmd.php in which the http parameter "locking" is not properly handled. The NDN-210 is part of Barco TransForm N solution and this vulnerability is patched from TransForm N version 3.8 onwards.

Aria Operations for Networks contains a command injection vulnerability. A malicious actor with network access to VMware Aria Operations for Networks may be able to perform a command injection attack resulting in remote code execution.

D-Link DIR-822+ V1.0.5 was found to contain a command injection in ftext function of upload_firmware.cgi, which allows remote attackers to execute arbitrary commands via shell.

An issue in craigms/main.php of CraigMS 1.0 allows attackers to execute arbitrary commands via a crafted input entered into the DB Name field.

Command Injection in PHPMyWind v5.6 allows remote attackers to execute arbitrary code via the "text color" field of the component '/admin/web_config.php'.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. Due to insufficient input validation, remote attackers with low permissions could exploit this vulnerability by sending crafted commands to the affected device. Successful exploit could allow an attacker to execute commands.

A vulnerability was found in HadSky up to 7.11.8. It has been declared as critical. This vulnerability affects unknown code of the file /install/index.php of the component Installation Interface. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-224242 is the identifier assigned to this vulnerability.

Barco TransForm NDN-210 Lite, NDN-210 Pro, NDN-211 Lite, and NDN-211 Pro before 3.8 allows Command Injection (issue 1 of 4). The NDN-210 has a web administration panel which is made available over https. The logon method is basic authentication. There is a command injection issue that will result in unauthenticated remote code execution in the username and password fields of the logon prompt. The NDN-210 is part of Barco TransForm N solution and includes the patch from TransForm N version 3.8 onwards.

Command Injection in GitHub repository microweber/microweber prior to 1.3.3.

Command Injection in Simiki v1.6.2.1 and prior allows remote attackers to execute arbitrary system commands via line 64 of the component 'simiki/blob/master/simiki/config.py'.

Barco TransForm N before 3.8 allows Command Injection (issue 2 of 4). The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users of the administration panel to perform authenticated remote code execution. An issue exists in split_card_cmd.php in which the http parameters xmodules, ymodules and savelocking are not properly handled. The NDN-210 is part of Barco TransForm N solution and includes the patch from TransForm N version 3.8 onwards.

An issue was identified in GitLab CE/EE affecting all versions from 1.0 prior to 15.8.5, 15.9 prior to 15.9.4, and 15.10 prior to 15.10.1 where non-printable characters gets copied from clipboard, allowing unexpected commands to be executed on victim machine.

A vulnerability was determined in Telesquare TLR-2005KSH 1.2.4. The affected element is an unknown function of the file /cgi-bin/internet.cgi?Command=lanCfg. Executing manipulation of the argument Hostname can lead to command injection. The attack may be performed from a remote location. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in TRENDnet TEW-652BRP 3.04b01. It has been classified as critical. Affected is an unknown function of the file ping.ccp of the component Web Interface. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-220020.

Tenda FH1202 v1.2.0.14(408) firmware contains a command injection vulnerablility in the formexeCommand function via the cmdinput parameter.

A vulnerability has been found in Netgear WNDR3700v2 1.0.1.14 and classified as critical. This vulnerability affects unknown code of the component Web Interface. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-221152.

Command Injection in GitHub repository thorsten/phpmyfaq prior to 3.1.11.

Improper Input Validation vulnerability in ABB Ltd. ASPECT®-Enterprise on ASPECT®-Enterprise, Linux (2CQG103201S3021, 2CQG103202S3021, 2CQG103203S3021, 2CQG103204S3021 modules), ABB Ltd. NEXUS Series on NEXUS Series, Linux (2CQG100102R2021, 2CQG100104R2021, 2CQG100105R2021, 2CQG100106R2021, 2CQG100110R2021, 2CQG100112R2021, 2CQG100103R2021, 2CQG100107R2021, 2CQG100108R2021, 2CQG100109R2021, 2CQG100111R2021, 2CQG100113R2021 modules), ABB Ltd. MATRIX Series on MATRIX Series, Linux (2CQG100102R1021, 2CQG100103R1021, 2CQG100104R1021, 2CQG100105R1021, 2CQG100106R1021 modules) allows Command Injection.This issue affects ASPECT®-Enterprise: from 3.0;0 before 3.07.0; NEXUS Series: from 3.0;0 before 3.07.0; MATRIX Series: from 3.0;0 before 3.07.1.

Baicells EG7035-M11 devices with firmware through BCE-ODU-1.0.8 are vulnerable to improper code exploitation via HTTP GET command injections. Commands are executed using pre-login execution and executed with root permissions. The following methods have been tested and validated by a 3rd party analyst and have been confirmed exploitable special thanks to Lionel Musonza for the discovery.