In the Linux kernel, the following vulnerability has been resolved: media: mxl111sf: change mutex_init() location Syzbot reported, that mxl111sf_ctrl_msg() uses uninitialized mutex. The problem was in wrong mutex_init() location. Previous mutex_init(&state->msg_lock) call was in ->init() function, but dvb_usbv2_init() has this order of calls: dvb_usbv2_init() dvb_usbv2_adapter_init() dvb_usbv2_adapter_frontend_init() props->frontend_attach() props->init() Since mxl111sf_* devices call mxl111sf_ctrl_msg() in ->frontend_attach() internally we need to initialize state->msg_lock before frontend_attach(). To achieve it, ->probe() call added to all mxl111sf_* devices, which will simply initiaize mutex.

In the Linux kernel, the following vulnerability has been resolved: bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx As the introduction of the support for vsock and unix sockets in sockmap, tls_sw_has_ctx_tx/rx cannot presume the socket passed in must be IS_ICSK. vsock and af_unix sockets have vsock_sock and unix_sock instead of inet_connection_sock. For these sockets, tls_get_ctx may return an invalid pointer and cause page fault in function tls_sw_ctx_rx. BUG: unable to handle page fault for address: 0000000000040030 Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:sk_psock_strp_data_ready+0x23/0x60 Call Trace: ? __die+0x81/0xc3 ? no_context+0x194/0x350 ? do_page_fault+0x30/0x110 ? async_page_fault+0x3e/0x50 ? sk_psock_strp_data_ready+0x23/0x60 virtio_transport_recv_pkt+0x750/0x800 ? update_load_avg+0x7e/0x620 vsock_loopback_work+0xd0/0x100 process_one_work+0x1a7/0x360 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? __kthread_cancel_work+0x40/0x40 ret_from_fork+0x1f/0x40 v2: - Add IS_ICSK check v3: - Update the commits in Fixes

In the Linux kernel, the following vulnerability has been resolved: idpf: fix idpf_vc_core_init error path In an event where the platform running the device control plane is rebooted, reset is detected on the driver. It releases all the resources and waits for the reset to complete. Once the reset is done, it tries to build the resources back. At this time if the device control plane is not yet started, then the driver timeouts on the virtchnl message and retries to establish the mailbox again. In the retry flow, mailbox is deinitialized but the mailbox workqueue is still alive and polling for the mailbox message. This results in accessing the released control queue leading to null-ptr-deref. Fix it by unrolling the work queue cancellation and mailbox deinitialization in the reverse order which they got initialized.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix 6 GHz scan construction If more than 255 colocated APs exist for the set of all APs found during 2.4/5 GHz scanning, then the 6 GHz scan construction will loop forever since the loop variable has type u8, which can never reach the number found when that's bigger than 255, and is stored in a u32 variable. Also move it into the loops to have a smaller scope. Using a u32 there is fine, we limit the number of APs in the scan list and each has a limit on the number of RNR entries due to the frame size. With a limit of 1000 scan results, a frame size upper bound of 4096 (really it's more like ~2300) and a TBTT entry size of at least 11, we get an upper bound for the number of ~372k, well in the bounds of a u32.

In the Linux kernel, the following vulnerability has been resolved: clk: clk-apple-nco: Add NULL check in applnco_probe Add NULL check in applnco_probe, to handle kernel NULL pointer dereference error.

In the Linux kernel, the following vulnerability has been resolved: mm: krealloc: Fix MTE false alarm in __do_krealloc This patch addresses an issue introduced by commit 1a83a716ec233 ("mm: krealloc: consider spare memory for __GFP_ZERO") which causes MTE (Memory Tagging Extension) to falsely report a slab-out-of-bounds error. The problem occurs when zeroing out spare memory in __do_krealloc. The original code only considered software-based KASAN and did not account for MTE. It does not reset the KASAN tag before calling memset, leading to a mismatch between the pointer tag and the memory tag, resulting in a false positive. Example of the error: ================================================================== swapper/0: BUG: KASAN: slab-out-of-bounds in __memset+0x84/0x188 swapper/0: Write at addr f4ffff8005f0fdf0 by task swapper/0/1 swapper/0: Pointer tag: [f4], memory tag: [fe] swapper/0: swapper/0: CPU: 4 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12. swapper/0: Hardware name: MT6991(ENG) (DT) swapper/0: Call trace: swapper/0: dump_backtrace+0xfc/0x17c swapper/0: show_stack+0x18/0x28 swapper/0: dump_stack_lvl+0x40/0xa0 swapper/0: print_report+0x1b8/0x71c swapper/0: kasan_report+0xec/0x14c swapper/0: __do_kernel_fault+0x60/0x29c swapper/0: do_bad_area+0x30/0xdc swapper/0: do_tag_check_fault+0x20/0x34 swapper/0: do_mem_abort+0x58/0x104 swapper/0: el1_abort+0x3c/0x5c swapper/0: el1h_64_sync_handler+0x80/0xcc swapper/0: el1h_64_sync+0x68/0x6c swapper/0: __memset+0x84/0x188 swapper/0: btf_populate_kfunc_set+0x280/0x3d8 swapper/0: __register_btf_kfunc_id_set+0x43c/0x468 swapper/0: register_btf_kfunc_id_set+0x48/0x60 swapper/0: register_nf_nat_bpf+0x1c/0x40 swapper/0: nf_nat_init+0xc0/0x128 swapper/0: do_one_initcall+0x184/0x464 swapper/0: do_initcall_level+0xdc/0x1b0 swapper/0: do_initcalls+0x70/0xc0 swapper/0: do_basic_setup+0x1c/0x28 swapper/0: kernel_init_freeable+0x144/0x1b8 swapper/0: kernel_init+0x20/0x1a8 swapper/0: ret_from_fork+0x10/0x20 ==================================================================

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use online_vcpus, not created_vcpus, to iterate over vCPUs Use the kvm_for_each_vcpu() helper to iterate over vCPUs when encrypting VMSAs for SEV, which effectively switches to use online_vcpus instead of created_vcpus. This fixes a possible null-pointer dereference as created_vcpus does not guarantee a vCPU exists, since it is updated at the very beginning of KVM_CREATE_VCPU. created_vcpus exists to allow the bulk of vCPU creation to run in parallel, while still correctly restricting the max number of max vCPUs.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost() cpufreq_cpu_get_raw() may return NULL if the cpu is not in policy->cpus cpu mask and it will cause null pointer dereference, so check NULL for cppc_get_cpu_cost().

In the Linux kernel, the following vulnerability has been resolved: drm/tegra: Fix NULL vs IS_ERR() check in probe() The iommu_paging_domain_alloc() function doesn't return NULL pointers, it returns error pointers. Update the check to match.

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Lock XArray when getting entries for the VM Similar to commit cac075706f29 ("drm/panthor: Fix race when converting group handle to group object") we need to use the XArray's internal locking when retrieving a vm pointer from there. v2: Removed part of the patch that was trying to protect fetching the heap pointer from XArray, as that operation is protected by the @pool->lock.

In the Linux kernel, the following vulnerability has been resolved: io_uring: check for overflows in io_pin_pages WARNING: CPU: 0 PID: 5834 at io_uring/memmap.c:144 io_pin_pages+0x149/0x180 io_uring/memmap.c:144 CPU: 0 UID: 0 PID: 5834 Comm: syz-executor825 Not tainted 6.12.0-next-20241118-syzkaller #0 Call Trace: <TASK> __io_uaddr_map+0xfb/0x2d0 io_uring/memmap.c:183 io_rings_map io_uring/io_uring.c:2611 [inline] io_allocate_scq_urings+0x1c0/0x650 io_uring/io_uring.c:3470 io_uring_create+0x5b5/0xc00 io_uring/io_uring.c:3692 io_uring_setup io_uring/io_uring.c:3781 [inline] ... </TASK> io_pin_pages()'s uaddr parameter came directly from the user and can be garbage. Don't just add size to it as it can overflow.

In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent NULL dereference in nfsd4_process_cb_update() @ses is initialized to NULL. If __nfsd4_find_backchannel() finds no available backchannel session, setup_callback_client() will try to dereference @ses and segfault.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: uncache inode which has failed entering the group Syzbot has reported the following BUG: kernel BUG at fs/ocfs2/uptodate.c:509! ... Call Trace: <TASK> ? __die_body+0x5f/0xb0 ? die+0x9e/0xc0 ? do_trap+0x15a/0x3a0 ? ocfs2_set_new_buffer_uptodate+0x145/0x160 ? do_error_trap+0x1dc/0x2c0 ? ocfs2_set_new_buffer_uptodate+0x145/0x160 ? __pfx_do_error_trap+0x10/0x10 ? handle_invalid_op+0x34/0x40 ? ocfs2_set_new_buffer_uptodate+0x145/0x160 ? exc_invalid_op+0x38/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? ocfs2_set_new_buffer_uptodate+0x2e/0x160 ? ocfs2_set_new_buffer_uptodate+0x144/0x160 ? ocfs2_set_new_buffer_uptodate+0x145/0x160 ocfs2_group_add+0x39f/0x15a0 ? __pfx_ocfs2_group_add+0x10/0x10 ? __pfx_lock_acquire+0x10/0x10 ? mnt_get_write_access+0x68/0x2b0 ? __pfx_lock_release+0x10/0x10 ? rcu_read_lock_any_held+0xb7/0x160 ? __pfx_rcu_read_lock_any_held+0x10/0x10 ? smack_log+0x123/0x540 ? mnt_get_write_access+0x68/0x2b0 ? mnt_get_write_access+0x68/0x2b0 ? mnt_get_write_access+0x226/0x2b0 ocfs2_ioctl+0x65e/0x7d0 ? __pfx_ocfs2_ioctl+0x10/0x10 ? smack_file_ioctl+0x29e/0x3a0 ? __pfx_smack_file_ioctl+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x43d/0x780 ? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10 ? __pfx_ocfs2_ioctl+0x10/0x10 __se_sys_ioctl+0xfb/0x170 do_syscall_64+0xf3/0x230 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... </TASK> When 'ioctl(OCFS2_IOC_GROUP_ADD, ...)' has failed for the particular inode in 'ocfs2_verify_group_and_input()', corresponding buffer head remains cached and subsequent call to the same 'ioctl()' for the same inode issues the BUG() in 'ocfs2_set_new_buffer_uptodate()' (trying to cache the same buffer head of that inode). Fix this by uncaching the buffer head with 'ocfs2_remove_from_cache()' on error path in 'ocfs2_group_add()'.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix NULL pointer derefernce in hns_roce_map_mr_sg() ib_map_mr_sg() allows ULPs to specify NULL as the sg_offset argument. The driver needs to check whether it is a NULL pointer before dereferencing it.

In the Linux kernel, the following vulnerability has been resolved: ARM: fix cacheflush with PAN It seems that the cacheflush syscall got broken when PAN for LPAE was implemented. User access was not enabled around the cache maintenance instructions, causing them to fault.

In the Linux kernel, the following vulnerability has been resolved: svcrdma: Address an integer overflow Dan Carpenter reports: > Commit 78147ca8b4a9 ("svcrdma: Add a "parsed chunk list" data > structure") from Jun 22, 2020 (linux-next), leads to the following > Smatch static checker warning: > > net/sunrpc/xprtrdma/svc_rdma_recvfrom.c:498 xdr_check_write_chunk() > warn: potential user controlled sizeof overflow 'segcount * 4 * 4' > > net/sunrpc/xprtrdma/svc_rdma_recvfrom.c > 488 static bool xdr_check_write_chunk(struct svc_rdma_recv_ctxt *rctxt) > 489 { > 490 u32 segcount; > 491 __be32 *p; > 492 > 493 if (xdr_stream_decode_u32(&rctxt->rc_stream, &segcount)) > ^^^^^^^^ > > 494 return false; > 495 > 496 /* A bogus segcount causes this buffer overflow check to fail. */ > 497 p = xdr_inline_decode(&rctxt->rc_stream, > --> 498 segcount * rpcrdma_segment_maxsz * sizeof(*p)); > > > segcount is an untrusted u32. On 32bit systems anything >= SIZE_MAX / 16 will > have an integer overflow and some those values will be accepted by > xdr_inline_decode().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix possible deadlocks This fixes possible deadlocks like the following caused by hci_cmd_sync_dequeue causing the destroy function to run: INFO: task kworker/u19:0:143 blocked for more than 120 seconds. Tainted: G W O 6.8.0-2024-03-19-intel-next-iLS-24ww14 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u19:0 state:D stack:0 pid:143 tgid:143 ppid:2 flags:0x00004000 Workqueue: hci0 hci_cmd_sync_work [bluetooth] Call Trace: <TASK> __schedule+0x374/0xaf0 schedule+0x3c/0xf0 schedule_preempt_disabled+0x1c/0x30 __mutex_lock.constprop.0+0x3ef/0x7a0 __mutex_lock_slowpath+0x13/0x20 mutex_lock+0x3c/0x50 mgmt_set_connectable_complete+0xa4/0x150 [bluetooth] ? kfree+0x211/0x2a0 hci_cmd_sync_dequeue+0xae/0x130 [bluetooth] ? __pfx_cmd_complete_rsp+0x10/0x10 [bluetooth] cmd_complete_rsp+0x26/0x80 [bluetooth] mgmt_pending_foreach+0x4d/0x70 [bluetooth] __mgmt_power_off+0x8d/0x180 [bluetooth] ? _raw_spin_unlock_irq+0x23/0x40 hci_dev_close_sync+0x445/0x5b0 [bluetooth] hci_set_powered_sync+0x149/0x250 [bluetooth] set_powered_sync+0x24/0x60 [bluetooth] hci_cmd_sync_work+0x90/0x150 [bluetooth] process_one_work+0x13e/0x300 worker_thread+0x2f7/0x420 ? __pfx_worker_thread+0x10/0x10 kthread+0x107/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3d/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: virtio/vsock: Fix accept_queue memory leak As the final stages of socket destruction may be delayed, it is possible that virtio_transport_recv_listen() will be called after the accept_queue has been flushed, but before the SOCK_DONE flag has been set. As a result, sockets enqueued after the flush would remain unremoved, leading to a memory leak. vsock_release __vsock_release lock virtio_transport_release virtio_transport_close schedule_delayed_work(close_work) sk_shutdown = SHUTDOWN_MASK (!) flush accept_queue release virtio_transport_recv_pkt vsock_find_bound_socket lock if flag(SOCK_DONE) return virtio_transport_recv_listen child = vsock_create_connected (!) vsock_enqueue_accept(child) release close_work lock virtio_transport_do_close set_flag(SOCK_DONE) virtio_transport_remove_sock vsock_remove_sock vsock_remove_bound release Introduce a sk_shutdown check to disallow vsock_enqueue_accept() during socket destruction. unreferenced object 0xffff888109e3f800 (size 2040): comm "kworker/5:2", pid 371, jiffies 4294940105 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 28 00 0b 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............ backtrace (crc 9e5f4e84): [<ffffffff81418ff1>] kmem_cache_alloc_noprof+0x2c1/0x360 [<ffffffff81d27aa0>] sk_prot_alloc+0x30/0x120 [<ffffffff81d2b54c>] sk_alloc+0x2c/0x4b0 [<ffffffff81fe049a>] __vsock_create.constprop.0+0x2a/0x310 [<ffffffff81fe6d6c>] virtio_transport_recv_pkt+0x4dc/0x9a0 [<ffffffff81fe745d>] vsock_loopback_work+0xfd/0x140 [<ffffffff810fc6ac>] process_one_work+0x20c/0x570 [<ffffffff810fce3f>] worker_thread+0x1bf/0x3a0 [<ffffffff811070dd>] kthread+0xdd/0x110 [<ffffffff81044fdd>] ret_from_fork+0x2d/0x50 [<ffffffff8100785a>] ret_from_fork_asm+0x1a/0x30

In the Linux kernel, the following vulnerability has been resolved: tpm: Lock TPM chip in tpm_pm_suspend() first Setting TPM_CHIP_FLAG_SUSPENDED in the end of tpm_pm_suspend() can be racy according, as this leaves window for tpm_hwrng_read() to be called while the operation is in progress. The recent bug report gives also evidence of this behaviour. Aadress this by locking the TPM chip before checking any chip->flags both in tpm_pm_suspend() and tpm_hwrng_read(). Move TPM_CHIP_FLAG_SUSPENDED check inside tpm_get_random() so that it will be always checked only when the lock is reserved.

In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Clear virtualized VMLOAD/VMSAVE on Zen4 client A number of Zen4 client SoCs advertise the ability to use virtualized VMLOAD/VMSAVE, but using these instructions is reported to be a cause of a random host reboot. These instructions aren't intended to be advertised on Zen4 client so clear the capability.

In the Linux kernel, the following vulnerability has been resolved: phy: realtek: usb: fix NULL deref in rtk_usb3phy_probe In rtk_usb3phy_probe() devm_kzalloc() may return NULL but this returned value is not checked.

In the Linux kernel, the following vulnerability has been resolved: riscv: Prevent a bad reference count on CPU nodes When populating cache leaves we previously fetched the CPU device node at the very beginning. But when ACPI is enabled we go through a specific branch which returns early and does not call 'of_node_put' for the node that was acquired. Since we are not using a CPU device node for the ACPI code anyways, we can simply move the initialization of it just passed the ACPI block, and we are guaranteed to have an 'of_node_put' call for the acquired node. This prevents a bad reference count of the CPU device node. Moreover, the previous function did not check for errors when acquiring the device node, so a return -ENOENT has been added for that case.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint Patch series "nilfs2: fix null-ptr-deref bugs on block tracepoints". This series fixes null pointer dereference bugs that occur when using nilfs2 and two block-related tracepoints. This patch (of 2): It has been reported that when using "block:block_touch_buffer" tracepoint, touch_buffer() called from __nilfs_get_folio_block() causes a NULL pointer dereference, or a general protection fault when KASAN is enabled. This happens because since the tracepoint was added in touch_buffer(), it references the dev_t member bh->b_bdev->bd_dev regardless of whether the buffer head has a pointer to a block_device structure. In the current implementation, the block_device structure is set after the function returns to the caller. Here, touch_buffer() is used to mark the folio/page that owns the buffer head as accessed, but the common search helper for folio/page used by the caller function was optimized to mark the folio/page as accessed when it was reimplemented a long time ago, eliminating the need to call touch_buffer() here in the first place. So this solves the issue by eliminating the touch_buffer() call itself.

In the Linux kernel, the following vulnerability has been resolved: ipc: fix memleak if msg_init_ns failed in create_ipc_ns Percpu memory allocation may failed during create_ipc_ns however this fail is not handled properly since ipc sysctls and mq sysctls is not released properly. Fix this by release these two resource when failure. Here is the kmemleak stack when percpu failed: unreferenced object 0xffff88819de2a600 (size 512): comm "shmem_2nstest", pid 120711, jiffies 4300542254 hex dump (first 32 bytes): 60 aa 9d 84 ff ff ff ff fc 18 48 b2 84 88 ff ff `.........H..... 04 00 00 00 a4 01 00 00 20 e4 56 81 ff ff ff ff ........ .V..... backtrace (crc be7cba35): [<ffffffff81b43f83>] __kmalloc_node_track_caller_noprof+0x333/0x420 [<ffffffff81a52e56>] kmemdup_noprof+0x26/0x50 [<ffffffff821b2f37>] setup_mq_sysctls+0x57/0x1d0 [<ffffffff821b29cc>] copy_ipcs+0x29c/0x3b0 [<ffffffff815d6a10>] create_new_namespaces+0x1d0/0x920 [<ffffffff815d7449>] copy_namespaces+0x2e9/0x3e0 [<ffffffff815458f3>] copy_process+0x29f3/0x7ff0 [<ffffffff8154b080>] kernel_clone+0xc0/0x650 [<ffffffff8154b6b1>] __do_sys_clone+0xa1/0xe0 [<ffffffff843df8ff>] do_syscall_64+0xbf/0x1c0 [<ffffffff846000b0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53

In the Linux kernel, the following vulnerability has been resolved: ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_init_flow() There are code paths from which the function is called without holding the RCU read lock, resulting in a suspicious RCU usage warning [1]. Fix by using l3mdev_master_upper_ifindex_by_index() which will acquire the RCU read lock before calling l3mdev_master_upper_ifindex_by_index_rcu(). [1] WARNING: suspicious RCU usage 6.12.0-rc3-custom-gac8f72681cf2 #141 Not tainted ----------------------------- net/core/dev.c:876 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/361: #0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60 stack backtrace: CPU: 3 UID: 0 PID: 361 Comm: ip Not tainted 6.12.0-rc3-custom-gac8f72681cf2 #141 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl+0xba/0x110 lockdep_rcu_suspicious.cold+0x4f/0xd6 dev_get_by_index_rcu+0x1d3/0x210 l3mdev_master_upper_ifindex_by_index_rcu+0x2b/0xf0 ip_tunnel_bind_dev+0x72f/0xa00 ip_tunnel_newlink+0x368/0x7a0 ipgre_newlink+0x14c/0x170 __rtnl_newlink+0x1173/0x19c0 rtnl_newlink+0x6c/0xa0 rtnetlink_rcv_msg+0x3cc/0xf60 netlink_rcv_skb+0x171/0x450 netlink_unicast+0x539/0x7f0 netlink_sendmsg+0x8c1/0xd80 ____sys_sendmsg+0x8f9/0xc20 ___sys_sendmsg+0x197/0x1e0 __sys_sendmsg+0x122/0x1f0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Start the RTC update work later The RTC update work involves runtime resuming the UFS controller. Hence, only start the RTC update work after runtime power management in the UFS driver has been fully initialized. This patch fixes the following kernel crash: Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP Workqueue: events ufshcd_rtc_work Call trace: _raw_spin_lock_irqsave+0x34/0x8c (P) pm_runtime_get_if_active+0x24/0x9c (L) pm_runtime_get_if_active+0x24/0x9c ufshcd_rtc_work+0x138/0x1b4 process_one_work+0x148/0x288 worker_thread+0x2cc/0x3d4 kthread+0x110/0x114 ret_from_fork+0x10/0x20

An issue was discovered in the Linux kernel before 5.15.11. There is a memory leak in the __rds_conn_create() function in net/rds/connection.c in a certain combination of circumstances.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: kTLS, Fix incorrect page refcounting The kTLS tx handling code is using a mix of get_page() and page_ref_inc() APIs to increment the page reference. But on the release path (mlx5e_ktls_tx_handle_resync_dump_comp()), only put_page() is used. This is an issue when using pages from large folios: the get_page() references are stored on the folio page while the page_ref_inc() references are stored directly in the given page. On release the folio page will be dereferenced too many times. This was found while doing kTLS testing with sendfile() + ZC when the served file was read from NFS on a kernel with NFS large folios support (commit 49b29a573da8 ("nfs: add support for large folios")).

In the Linux kernel, the following vulnerability has been resolved: slub/kunit: fix a WARNING due to unwrapped __kmalloc_cache_noprof 'modprobe slub_kunit' will have a warning as shown below. The root cause is that __kmalloc_cache_noprof was directly used, which resulted in no alloc_tag being allocated. This caused current->alloc_tag to be null, leading to a warning in alloc_tag_add_check. Let's add an alloc_hook layer to __kmalloc_cache_noprof specifically within lib/slub_kunit.c, which is the only user of this internal slub function outside kmalloc implementation itself. [58162.947016] WARNING: CPU: 2 PID: 6210 at ./include/linux/alloc_tag.h:125 alloc_tagging_slab_alloc_hook+0x268/0x27c [58162.957721] Call trace: [58162.957919] alloc_tagging_slab_alloc_hook+0x268/0x27c [58162.958286] __kmalloc_cache_noprof+0x14c/0x344 [58162.958615] test_kmalloc_redzone_access+0x50/0x10c [slub_kunit] [58162.959045] kunit_try_run_case+0x74/0x184 [kunit] [58162.959401] kunit_generic_run_threadfn_adapter+0x2c/0x4c [kunit] [58162.959841] kthread+0x10c/0x118 [58162.960093] ret_from_fork+0x10/0x20 [58162.960363] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: defer partition scanning We need to suppress the partition scan from occuring within the controller's scan_work context. If a path error occurs here, the IO will wait until a path becomes available or all paths are torn down, but that action also occurs within scan_work, so it would deadlock. Defer the partion scan to a different context that does not block scan_work.

In the Linux kernel, the following vulnerability has been resolved: virtio_pci: Fix admin vq cleanup by using correct info pointer vp_modern_avq_cleanup() and vp_del_vqs() clean up admin vq resources by virtio_pci_vq_info pointer. The info pointer of admin vq is stored in vp_dev->admin_vq.info instead of vp_dev->vqs[]. Using the info pointer from vp_dev->vqs[] for admin vq causes a kernel NULL pointer dereference bug. In vp_modern_avq_cleanup() and vp_del_vqs(), get the info pointer from vp_dev->admin_vq.info for admin vq to clean up the resources. Also make info ptr as argument of vp_del_vq() to be symmetric with vp_setup_vq(). vp_reset calls vp_modern_avq_cleanup, and causes the Call Trace: ================================================================== BUG: kernel NULL pointer dereference, address:0000000000000000 ... CPU: 49 UID: 0 PID: 4439 Comm: modprobe Not tainted 6.11.0-rc5 #1 RIP: 0010:vp_reset+0x57/0x90 [virtio_pci] Call Trace: <TASK> ... ? vp_reset+0x57/0x90 [virtio_pci] ? vp_reset+0x38/0x90 [virtio_pci] virtio_reset_device+0x1d/0x30 remove_vq_common+0x1c/0x1a0 [virtio_net] virtnet_remove+0xa1/0xc0 [virtio_net] virtio_dev_remove+0x46/0xa0 ... virtio_pci_driver_exit+0x14/0x810 [virtio_pci] ==================================================================

In the Linux kernel, the following vulnerability has been resolved: mm/slab: fix warning caused by duplicate kmem_cache creation in kmem_buckets_create Commit b035f5a6d852 ("mm: slab: reduce the kmalloc() minimum alignment if DMA bouncing possible") reduced ARCH_KMALLOC_MINALIGN to 8 on arm64. However, with KASAN_HW_TAGS enabled, arch_slab_minalign() becomes 16. This causes kmalloc_caches[*][8] to be aliased to kmalloc_caches[*][16], resulting in kmem_buckets_create() attempting to create a kmem_cache for size 16 twice. This duplication triggers warnings on boot: [ 2.325108] ------------[ cut here ]------------ [ 2.325135] kmem_cache of name 'memdup_user-16' already exists [ 2.325783] WARNING: CPU: 0 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0 [ 2.327957] Modules linked in: [ 2.328550] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc5mm-unstable-arm64+ #12 [ 2.328683] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024 [ 2.328790] pstate: 61000009 (nZCv daif -PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 2.328911] pc : __kmem_cache_create_args+0xb8/0x3b0 [ 2.328930] lr : __kmem_cache_create_args+0xb8/0x3b0 [ 2.328942] sp : ffff800083d6fc50 [ 2.328961] x29: ffff800083d6fc50 x28: f2ff0000c1674410 x27: ffff8000820b0598 [ 2.329061] x26: 000000007fffffff x25: 0000000000000010 x24: 0000000000002000 [ 2.329101] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388 [ 2.329118] x20: f2ff0000c1674410 x19: f5ff0000c16364c0 x18: ffff800083d80030 [ 2.329135] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 2.329152] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120 [ 2.329169] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000 [ 2.329194] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 [ 2.329210] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 2.329226] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 2.329291] Call trace: [ 2.329407] __kmem_cache_create_args+0xb8/0x3b0 [ 2.329499] kmem_buckets_create+0xfc/0x320 [ 2.329526] init_user_buckets+0x34/0x78 [ 2.329540] do_one_initcall+0x64/0x3c8 [ 2.329550] kernel_init_freeable+0x26c/0x578 [ 2.329562] kernel_init+0x3c/0x258 [ 2.329574] ret_from_fork+0x10/0x20 [ 2.329698] ---[ end trace 0000000000000000 ]--- [ 2.403704] ------------[ cut here ]------------ [ 2.404716] kmem_cache of name 'msg_msg-16' already exists [ 2.404801] WARNING: CPU: 2 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0 [ 2.404842] Modules linked in: [ 2.404971] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.0-rc5mm-unstable-arm64+ #12 [ 2.405026] Tainted: [W]=WARN [ 2.405043] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024 [ 2.405057] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.405079] pc : __kmem_cache_create_args+0xb8/0x3b0 [ 2.405100] lr : __kmem_cache_create_args+0xb8/0x3b0 [ 2.405111] sp : ffff800083d6fc50 [ 2.405115] x29: ffff800083d6fc50 x28: fbff0000c1674410 x27: ffff8000820b0598 [ 2.405135] x26: 000000000000ffd0 x25: 0000000000000010 x24: 0000000000006000 [ 2.405153] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388 [ 2.405169] x20: fbff0000c1674410 x19: fdff0000c163d6c0 x18: ffff800083d80030 [ 2.405185] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 2.405201] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120 [ 2.405217] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000 [ 2.405233] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 [ 2.405248] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 2.405271] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 2.405287] Call trace: [ 2 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix null deref accessing lag dev It could be the lag dev is null so stop processing the event. In bond_enslave() the active/backup slave being set before setting the upper dev so first event is without an upper dev. After setting the upper dev with bond_master_upper_dev_link() there is a second event and in that event we have an upper dev.

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Stop the active perfmon before being destroyed Upon closing the file descriptor, the active performance monitor is not stopped. Although all perfmons are destroyed in `vc4_perfmon_close_file()`, the active performance monitor's pointer (`vc4->active_perfmon`) is still retained. If we open a new file descriptor and submit a few jobs with performance monitors, the driver will attempt to stop the active performance monitor using the stale pointer in `vc4->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it.

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: dcp: fix NULL dereference in AEAD crypto operation When sealing or unsealing a key blob we currently do not wait for the AEAD cipher operation to finish and simply return after submitting the request. If there is some load on the system we can exit before the cipher operation is done and the buffer we read from/write to is already removed from the stack. This will e.g. result in NULL pointer dereference errors in the DCP driver during blob creation. Fix this by waiting for the AEAD cipher operation to finish before resuming the seal and unseal calls.

In the Linux kernel, the following vulnerability has been resolved: ice: Fix improper handling of refcount in ice_dpll_init_rclk_pins() This patch addresses a reference count handling issue in the ice_dpll_init_rclk_pins() function. The function calls ice_dpll_get_pins(), which increments the reference count of the relevant resources. However, if the condition WARN_ON((!vsi || !vsi->netdev)) is met, the function currently returns an error without properly releasing the resources acquired by ice_dpll_get_pins(), leading to a reference count leak. To resolve this, the check has been moved to the top of the function. This ensures that the function verifies the state before any resources are acquired, avoiding the need for additional resource management in the error path. This bug was identified by an experimental static analysis tool developed by our team. The tool specializes in analyzing reference count operations and detecting potential issues where resources are not properly managed. In this case, the tool flagged the missing release operation as a potential problem, which led to the development of this patch.

In the Linux kernel, the following vulnerability has been resolved: blk_iocost: fix more out of bound shifts Recently running UBSAN caught few out of bound shifts in the ioc_forgive_debts() function: UBSAN: shift-out-of-bounds in block/blk-iocost.c:2142:38 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... UBSAN: shift-out-of-bounds in block/blk-iocost.c:2144:30 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... Call Trace: <IRQ> dump_stack_lvl+0xca/0x130 __ubsan_handle_shift_out_of_bounds+0x22c/0x280 ? __lock_acquire+0x6441/0x7c10 ioc_timer_fn+0x6cec/0x7750 ? blk_iocost_init+0x720/0x720 ? call_timer_fn+0x5d/0x470 call_timer_fn+0xfa/0x470 ? blk_iocost_init+0x720/0x720 __run_timer_base+0x519/0x700 ... Actual impact of this issue was not identified but I propose to fix the undefined behaviour. The proposed fix to prevent those out of bound shifts consist of precalculating exponent before using it the shift operations by taking min value from the actual exponent and maximum possible number of bits.

In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-dspi: Fix crash when not using GPIO chip select Add check for the return value of spi_get_csgpiod() to avoid passing a NULL pointer to gpiod_direction_output(), preventing a crash when GPIO chip select is not used. Fix below crash: [ 4.251960] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 4.260762] Mem abort info: [ 4.263556] ESR = 0x0000000096000004 [ 4.267308] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.272624] SET = 0, FnV = 0 [ 4.275681] EA = 0, S1PTW = 0 [ 4.278822] FSC = 0x04: level 0 translation fault [ 4.283704] Data abort info: [ 4.286583] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 4.292074] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 4.297130] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 4.302445] [0000000000000000] user address but active_mm is swapper [ 4.308805] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 4.315072] Modules linked in: [ 4.318124] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc4-next-20241023-00008-ga20ec42c5fc1 #359 [ 4.328130] Hardware name: LS1046A QDS Board (DT) [ 4.332832] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.339794] pc : gpiod_direction_output+0x34/0x5c [ 4.344505] lr : gpiod_direction_output+0x18/0x5c [ 4.349208] sp : ffff80008003b8f0 [ 4.352517] x29: ffff80008003b8f0 x28: 0000000000000000 x27: ffffc96bcc7e9068 [ 4.359659] x26: ffffc96bcc6e00b0 x25: ffffc96bcc598398 x24: ffff447400132810 [ 4.366800] x23: 0000000000000000 x22: 0000000011e1a300 x21: 0000000000020002 [ 4.373940] x20: 0000000000000000 x19: 0000000000000000 x18: ffffffffffffffff [ 4.381081] x17: ffff44740016e600 x16: 0000000500000003 x15: 0000000000000007 [ 4.388221] x14: 0000000000989680 x13: 0000000000020000 x12: 000000000000001e [ 4.395362] x11: 0044b82fa09b5a53 x10: 0000000000000019 x9 : 0000000000000008 [ 4.402502] x8 : 0000000000000002 x7 : 0000000000000007 x6 : 0000000000000000 [ 4.409641] x5 : 0000000000000200 x4 : 0000000002000000 x3 : 0000000000000000 [ 4.416781] x2 : 0000000000022202 x1 : 0000000000000000 x0 : 0000000000000000 [ 4.423921] Call trace: [ 4.426362] gpiod_direction_output+0x34/0x5c (P) [ 4.431067] gpiod_direction_output+0x18/0x5c (L) [ 4.435771] dspi_setup+0x220/0x334

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Enable IRQ if do_ale() triggered in irq-enabled context Unaligned access exception can be triggered in irq-enabled context such as user mode, in this case do_ale() may call get_user() which may cause sleep. Then we will get: BUG: sleeping function called from invalid context at arch/loongarch/kernel/access-helper.h:7 in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 129, name: modprobe preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 CPU: 0 UID: 0 PID: 129 Comm: modprobe Tainted: G W 6.12.0-rc1+ #1723 Tainted: [W]=WARN Stack : 9000000105e0bd48 0000000000000000 9000000003803944 9000000105e08000 9000000105e0bc70 9000000105e0bc78 0000000000000000 0000000000000000 9000000105e0bc78 0000000000000001 9000000185e0ba07 9000000105e0b890 ffffffffffffffff 9000000105e0bc78 73924b81763be05b 9000000100194500 000000000000020c 000000000000000a 0000000000000000 0000000000000003 00000000000023f0 00000000000e1401 00000000072f8000 0000007ffbb0e260 0000000000000000 0000000000000000 9000000005437650 90000000055d5000 0000000000000000 0000000000000003 0000007ffbb0e1f0 0000000000000000 0000005567b00490 0000000000000000 9000000003803964 0000007ffbb0dfec 00000000000000b0 0000000000000007 0000000000000003 0000000000071c1d ... Call Trace: [<9000000003803964>] show_stack+0x64/0x1a0 [<9000000004c57464>] dump_stack_lvl+0x74/0xb0 [<9000000003861ab4>] __might_resched+0x154/0x1a0 [<900000000380c96c>] emulate_load_store_insn+0x6c/0xf60 [<9000000004c58118>] do_ale+0x78/0x180 [<9000000003801bc8>] handle_ale+0x128/0x1e0 So enable IRQ if unaligned access exception is triggered in irq-enabled context to fix it.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix possible crash on mgmt_index_removed If mgmt_index_removed is called while there are commands queued on cmd_sync it could lead to crashes like the bellow trace: 0x0000053D: __list_del_entry_valid_or_report+0x98/0xdc 0x0000053D: mgmt_pending_remove+0x18/0x58 [bluetooth] 0x0000053E: mgmt_remove_adv_monitor_complete+0x80/0x108 [bluetooth] 0x0000053E: hci_cmd_sync_work+0xbc/0x164 [bluetooth] So while handling mgmt_index_removed this attempts to dequeue commands passed as user_data to cmd_sync.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: reserve space for inline xattr before attaching reflink tree One of our customers reported a crash and a corrupted ocfs2 filesystem. The crash was due to the detection of corruption. Upon troubleshooting, the fsck -fn output showed the below corruption [EXTENT_LIST_FREE] Extent list in owner 33080590 claims 230 as the next free chain record, but fsck believes the largest valid value is 227. Clamp the next record value? n The stat output from the debugfs.ocfs2 showed the following corruption where the "Next Free Rec:" had overshot the "Count:" in the root metadata block. Inode: 33080590 Mode: 0640 Generation: 2619713622 (0x9c25a856) FS Generation: 904309833 (0x35e6ac49) CRC32: 00000000 ECC: 0000 Type: Regular Attr: 0x0 Flags: Valid Dynamic Features: (0x16) HasXattr InlineXattr Refcounted Extended Attributes Block: 0 Extended Attributes Inline Size: 256 User: 0 (root) Group: 0 (root) Size: 281320357888 Links: 1 Clusters: 141738 ctime: 0x66911b56 0x316edcb8 -- Fri Jul 12 06:02:30.829349048 2024 atime: 0x66911d6b 0x7f7a28d -- Fri Jul 12 06:11:23.133669517 2024 mtime: 0x66911b56 0x12ed75d7 -- Fri Jul 12 06:02:30.317552087 2024 dtime: 0x0 -- Wed Dec 31 17:00:00 1969 Refcount Block: 2777346 Last Extblk: 2886943 Orphan Slot: 0 Sub Alloc Slot: 0 Sub Alloc Bit: 14 Tree Depth: 1 Count: 227 Next Free Rec: 230 ## Offset Clusters Block# 0 0 2310 2776351 1 2310 2139 2777375 2 4449 1221 2778399 3 5670 731 2779423 4 6401 566 2780447 ....... .... ....... ....... .... ....... The issue was in the reflink workfow while reserving space for inline xattr. The problematic function is ocfs2_reflink_xattr_inline(). By the time this function is called the reflink tree is already recreated at the destination inode from the source inode. At this point, this function reserves space for inline xattrs at the destination inode without even checking if there is space at the root metadata block. It simply reduces the l_count from 243 to 227 thereby making space of 256 bytes for inline xattr whereas the inode already has extents beyond this index (in this case up to 230), thereby causing corruption. The fix for this is to reserve space for inline metadata at the destination inode before the reflink tree gets recreated. The customer has verified the fix.

In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix null ptr dereference in raid10_size() In raid10_run() if raid10_set_queue_limits() succeed, the return value is set to zero, and if following procedures failed raid10_run() will return zero while mddev->private is still NULL, causing null ptr dereference in raid10_size(). Fix the problem by only overwrite the return value if raid10_set_queue_limits() failed.

In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Make rmw_lock a raw_spin_lock The following BUG was triggered: ============================= [ BUG: Invalid wait context ] 6.12.0-rc2-XXX #406 Not tainted ----------------------------- kworker/1:1/62 is trying to lock: ffffff8801593030 (&cpc_ptr->rmw_lock){+.+.}-{3:3}, at: cpc_write+0xcc/0x370 other info that might help us debug this: context-{5:5} 2 locks held by kworker/1:1/62: #0: ffffff897ef5ec98 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested+0x2c/0x50 #1: ffffff880154e238 (&sg_policy->update_lock){....}-{2:2}, at: sugov_update_shared+0x3c/0x280 stack backtrace: CPU: 1 UID: 0 PID: 62 Comm: kworker/1:1 Not tainted 6.12.0-rc2-g9654bd3e8806 #406 Workqueue: 0x0 (events) Call trace: dump_backtrace+0xa4/0x130 show_stack+0x20/0x38 dump_stack_lvl+0x90/0xd0 dump_stack+0x18/0x28 __lock_acquire+0x480/0x1ad8 lock_acquire+0x114/0x310 _raw_spin_lock+0x50/0x70 cpc_write+0xcc/0x370 cppc_set_perf+0xa0/0x3a8 cppc_cpufreq_fast_switch+0x40/0xc0 cpufreq_driver_fast_switch+0x4c/0x218 sugov_update_shared+0x234/0x280 update_load_avg+0x6ec/0x7b8 dequeue_entities+0x108/0x830 dequeue_task_fair+0x58/0x408 __schedule+0x4f0/0x1070 schedule+0x54/0x130 worker_thread+0xc0/0x2e8 kthread+0x130/0x148 ret_from_fork+0x10/0x20 sugov_update_shared() locks a raw_spinlock while cpc_write() locks a spinlock. To have a correct wait-type order, update rmw_lock to a raw spinlock and ensure that interrupts will be disabled on the CPU holding it. [ rjw: Changelog edits ]

In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Use code segment selector for VERW operand Robert Gill reported below #GP in 32-bit mode when dosemu software was executing vm86() system call: general protection fault: 0000 [#1] PREEMPT SMP CPU: 4 PID: 4610 Comm: dosemu.bin Not tainted 6.6.21-gentoo-x86 #1 Hardware name: Dell Inc. PowerEdge 1950/0H723K, BIOS 2.7.0 10/30/2010 EIP: restore_all_switch_stack+0xbe/0xcf EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: ff8affdc DS: 0000 ES: 0000 FS: 0000 GS: 0033 SS: 0068 EFLAGS: 00010046 CR0: 80050033 CR2: 00c2101c CR3: 04b6d000 CR4: 000406d0 Call Trace: show_regs+0x70/0x78 die_addr+0x29/0x70 exc_general_protection+0x13c/0x348 exc_bounds+0x98/0x98 handle_exception+0x14d/0x14d exc_bounds+0x98/0x98 restore_all_switch_stack+0xbe/0xcf exc_bounds+0x98/0x98 restore_all_switch_stack+0xbe/0xcf This only happens in 32-bit mode when VERW based mitigations like MDS/RFDS are enabled. This is because segment registers with an arbitrary user value can result in #GP when executing VERW. Intel SDM vol. 2C documents the following behavior for VERW instruction: #GP(0) - If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. CLEAR_CPU_BUFFERS macro executes VERW instruction before returning to user space. Use %cs selector to reference VERW operand. This ensures VERW will not #GP for an arbitrary user %ds. [ mingo: Fixed the SOB chain. ]

In the Linux kernel, the following vulnerability has been resolved: mm, slub: avoid zeroing kmalloc redzone Since commit 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated kmalloc space than requested"), setting orig_size treats the wasted space (object_size - orig_size) as a redzone. However with init_on_free=1 we clear the full object->size, including the redzone. Additionally we clear the object metadata, including the stored orig_size, making it zero, which makes check_object() treat the whole object as a redzone. These issues lead to the following BUG report with "slub_debug=FUZ init_on_free=1": [ 0.000000] ============================================================================= [ 0.000000] BUG kmalloc-8 (Not tainted): kmalloc Redzone overwritten [ 0.000000] ----------------------------------------------------------------------------- [ 0.000000] [ 0.000000] 0xffff000010032858-0xffff00001003285f @offset=2136. First byte 0x0 instead of 0xcc [ 0.000000] FIX kmalloc-8: Restoring kmalloc Redzone 0xffff000010032858-0xffff00001003285f=0xcc [ 0.000000] Slab 0xfffffdffc0400c80 objects=36 used=23 fp=0xffff000010032a18 flags=0x3fffe0000000200(workingset|node=0|zone=0|lastcpupid=0x1ffff) [ 0.000000] Object 0xffff000010032858 @offset=2136 fp=0xffff0000100328c8 [ 0.000000] [ 0.000000] Redzone ffff000010032850: cc cc cc cc cc cc cc cc ........ [ 0.000000] Object ffff000010032858: cc cc cc cc cc cc cc cc ........ [ 0.000000] Redzone ffff000010032860: cc cc cc cc cc cc cc cc ........ [ 0.000000] Padding ffff0000100328b4: 00 00 00 00 00 00 00 00 00 00 00 00 ............ [ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.11.0-rc3-next-20240814-00004-g61844c55c3f4 #144 [ 0.000000] Hardware name: NXP i.MX95 19X19 board (DT) [ 0.000000] Call trace: [ 0.000000] dump_backtrace+0x90/0xe8 [ 0.000000] show_stack+0x18/0x24 [ 0.000000] dump_stack_lvl+0x74/0x8c [ 0.000000] dump_stack+0x18/0x24 [ 0.000000] print_trailer+0x150/0x218 [ 0.000000] check_object+0xe4/0x454 [ 0.000000] free_to_partial_list+0x2f8/0x5ec To address the issue, use orig_size to clear the used area. And restore the value of orig_size after clear the remaining area. When CONFIG_SLUB_DEBUG not defined, (get_orig_size()' directly returns s->object_size. So when using memset to init the area, the size can simply be orig_size, as orig_size returns object_size when CONFIG_SLUB_DEBUG not enabled. And orig_size can never be bigger than object_size.

In the Linux kernel, the following vulnerability has been resolved: gfs2: fix double destroy_workqueue error When gfs2_fill_super() fails, destroy_workqueue() is called within gfs2_gl_hash_clear(), and the subsequent code path calls destroy_workqueue() on the same work queue again. This issue can be fixed by setting the work queue pointer to NULL after the first destroy_workqueue() call and checking for a NULL pointer before attempting to destroy the work queue again.

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: Fix encoder->possible_clones Include the encoder itself in its possible_clones bitmask. In the past nothing validated that drivers were populating possible_clones correctly, but that changed in commit 74d2aacbe840 ("drm: Validate encoder->possible_clones"). Looks like radeon never got the memo and is still not following the rules 100% correctly. This results in some warnings during driver initialization: Bogus possible_clones: [ENCODER:46:TV-46] possible_clones=0x4 (full encoder mask=0x7) WARNING: CPU: 0 PID: 170 at drivers/gpu/drm/drm_mode_config.c:615 drm_mode_config_validate+0x113/0x39c ... (cherry picked from commit 3b6e7d40649c0d75572039aff9d0911864c689db)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointers before used [WHAT & HOW] Poniters, such as dc->clk_mgr, are null checked previously in the same function, so Coverity warns "implies that "dc->clk_mgr" might be null". As a result, these pointers need to be checked when used again. This fixes 10 FORWARD_NULL issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: Input: adp5589-keys - fix NULL pointer dereference We register a devm action to call adp5589_clear_config() and then pass the i2c client as argument so that we can call i2c_get_clientdata() in order to get our device object. However, i2c_set_clientdata() is only being set at the end of the probe function which means that we'll get a NULL pointer dereference in case the probe function fails early.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Handle null 'stream_status' in 'planes_changed_for_existing_stream' This commit adds a null check for 'stream_status' in the function 'planes_changed_for_existing_stream'. Previously, the code assumed 'stream_status' could be null, but did not handle the case where it was actually null. This could lead to a null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:3784 planes_changed_for_existing_stream() error: we previously assumed 'stream_status' could be null (see line 3774)