Suricata is a network IDS, IPS and NSM engine. Prior to versions 8.0.3 and 7.0.14, crafted DCERPC traffic can cause Suricata to expand a buffer w/o limits, leading to memory exhaustion and the process getting killed. While reported for DCERPC over UDP, it is believed that DCERPC over TCP and SMB are also vulnerable. DCERPC/TCP in the default configuration should not be vulnerable as the default stream depth is limited to 1MiB. Versions 8.0.3 and 7.0.14 contain a patch. Some workarounds are available. For DCERPC/UDP, disable the parser. For DCERPC/TCP, the `stream.reassembly.depth` setting will limit the amount of data that can be buffered. For DCERPC/SMB, the `stream.reassembly.depth` can be used as well, but is set to unlimited by default. Imposing a limit here may lead to loss of visibility in SMB.

Vulnerability in the RCPbind service running on UDP port (111), allowing a remote attacker to create a denial of service (DoS) condition.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.3 before 18.6.4, 18.7 before 18.7.2, and 18.8 before 18.8.2 that could have allowed an unauthenticated user to create a denial of service condition by sending repeated malformed SSH authentication requests.

In JetBrains Hub before 2022.3.15181 Throttling was missed when sending emails to a particular email address

Data Illusion Survey Software Solutions ngSurvey version 2.4.28 and below is vulnerable to Denial of Service if a survey contains a "Text Field", "Comment Field" or "Contact Details".

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 8.0 before 18.6.6, 18.7 before 18.7.4, and 18.8 before 18.8.4 that, under certain conditions could have allowed an unauthenticated user to cause denial of service by uploading malicious files.

Uncontrolled resource consumption refers to a software vulnerability where a attacker or system uses excessive resources, such as CPU, memory, or network bandwidth, without proper limitations or controls. This can cause a denial-of-service (DoS) attack or degrade the performance of the affected system.

A vulnerability has been identified in SIMATIC CP 1242-7 V2 (6GK7242-7KX31-0XE0) (All versions < V3.4.29), SIMATIC CP 1243-1 (6GK7243-1BX30-0XE0) (All versions < V3.4.29), SIMATIC CP 1243-1 DNP3 (incl. SIPLUS variants) (All versions < V3.4.29), SIMATIC CP 1243-1 IEC (incl. SIPLUS variants) (All versions < V3.4.29), SIMATIC CP 1243-7 LTE EU (6GK7243-7KX30-0XE0) (All versions < V3.4.29), SIMATIC CP 1243-7 LTE US (6GK7243-7SX30-0XE0) (All versions < V3.4.29), SIMATIC CP 1243-8 IRC (6GK7243-8RX30-0XE0) (All versions < V3.4.29), SIMATIC CP 1542SP-1 (6GK7542-6UX00-0XE0) (All versions < V2.3), SIMATIC CP 1542SP-1 IRC (6GK7542-6VX00-0XE0) (All versions < V2.3), SIMATIC CP 1543SP-1 (6GK7543-6WX00-0XE0) (All versions < V2.3), SIMATIC CP 443-1 (6GK7443-1EX30-0XE0) (All versions < V3.3), SIMATIC CP 443-1 (6GK7443-1EX30-0XE1) (All versions < V3.3), SIMATIC CP 443-1 Advanced (6GK7443-1GX30-0XE0) (All versions < V3.3), SIPLUS ET 200SP CP 1542SP-1 IRC TX RAIL (6AG2542-6VX00-4XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1543SP-1 ISEC (6AG1543-6WX00-7XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (6AG2543-6WX00-4XE0) (All versions < V2.3), SIPLUS NET CP 1242-7 V2 (6AG1242-7KX31-7XE0) (All versions < V3.4.29), SIPLUS NET CP 443-1 (6AG1443-1EX30-4XE0) (All versions < V3.3), SIPLUS NET CP 443-1 Advanced (6AG1443-1GX30-4XE0) (All versions < V3.3), SIPLUS S7-1200 CP 1243-1 (6AG1243-1BX30-2AX0) (All versions < V3.4.29), SIPLUS S7-1200 CP 1243-1 RAIL (6AG2243-1BX30-1XE0) (All versions < V3.4.29), SIPLUS TIM 1531 IRC (6AG1543-1MX00-7XE0) (All versions < V2.3.6), TIM 1531 IRC (6GK7543-1MX00-0XE0) (All versions < V2.3.6). The webserver of the affected products contains a vulnerability that may lead to a denial of service condition. An attacker may cause a denial of service situation of the webserver of the affected product.

The Linux kernel NFSD implementation prior to versions 5.19.17 and 6.0.2 are vulnerable to buffer overflow. NFSD tracks the number of pages held by each NFSD thread by combining the receive and send buffers of a remote procedure call (RPC) into a single array of pages. A client can force the send buffer to shrink by sending an RPC message over TCP with garbage data added at the end of the message. The RPC message with garbage data is still correctly formed according to the specification and is passed forward to handlers. Vulnerable code in NFSD is not expecting the oversized request and writes beyond the allocated buffer space. CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Affected devices contain a vulnerability that allows an unauthenticated attacker to trigger a denial of service condition. The vulnerability can be triggered if a large amount of DCP reset packets are sent to the device.

IBM MQ 9.0 LTS, 9.1 LTS, 9.2 LTS, 9.3 LTS, and 9.3 CD is vulnerable to a denial of service attack caused by an error applying configuration changes. IBM X-Force ID: 290335.

A memory leak exists in Palo Alto Networks PAN-OS software that enables an attacker to send a burst of crafted packets through the firewall that eventually prevents the firewall from processing traffic. This issue applies only to PA-5400 Series devices that are running PAN-OS software with the SSL Forward Proxy feature enabled.

Pimcore is an Open Source Data & Experience Management Platform. The Pimcore thumbnail generation can be used to flood the server with large files. By changing the file extension or scaling factor of the requested thumbnail, attackers can create files that are much larger in file size than the original. This vulnerability is fixed in 11.2.4.

This affects the package com.fasterxml.jackson.dataformat:jackson-dataformat-cbor from 0 and before 2.11.4, from 2.12.0-rc1 and before 2.12.1. Unchecked allocation of byte buffer can cause a java.lang.OutOfMemoryError exception.

rizin before Release v0.6.3 is vulnerable to Uncontrolled Resource Consumption via bin_pe_parse_imports, Pe_r_bin_pe_parse_var, and estimate_slide.

IBM MQ 9.0 LTS, 9.1 LTS, 9.2 LTS, 9.3 LTS and 9.3 CD, in certain configurations, is vulnerable to a denial of service attack caused by an error processing messages when an API Exit using MQBUFMH is used. IBM X-Force ID: 290259.

The LevelOne WBR-6012 router with firmware R0.40e6 is vulnerable to improper resource allocation within its web application, where a series of crafted HTTP requests can cause a reboot. This could lead to network service interruptions.

Cosign provides code signing and transparency for containers and binaries. Prior to version 2.2.4, maliciously-crafted software artifacts can cause denial of service of the machine running Cosign thereby impacting all services on the machine. The root cause is that Cosign creates slices based on the number of signatures, manifests or attestations in untrusted artifacts. As such, the untrusted artifact can control the amount of memory that Cosign allocates. The exact issue is Cosign allocates excessive memory on the lines that creates a slice of the same length as the manifests. Version 2.2.4 contains a patch for the vulnerability.

Varnish Cache before 7.3.2 and 7.4.x before 7.4.3 (and before 6.0.13 LTS), and Varnish Enterprise 6 before 6.0.12r6, allows credits exhaustion for an HTTP/2 connection control flow window, aka a Broke Window Attack.

An issue was discovered in Xen XAPI before 2020-12-15. Certain xenstore keys provide feedback from the guest, and are therefore watched by toolstack. Specifically, keys are watched by xenopsd, and data are forwarded via RPC through message-switch to xapi. The watching logic in xenopsd sends one RPC update containing all data, any time any single xenstore key is updated, and therefore has O(N^2) time complexity. Furthermore, message-switch retains recent (currently 128) RPC messages for diagnostic purposes, yielding O(M*N) space complexity. The quantity of memory a single guest can monopolise is bounded by xenstored quota, but the quota is fairly large. It is believed to be in excess of 1G per malicious guest. In practice, this manifests as a host denial of service, either through message-switch thrashing against swap, or OOMing entirely, depending on dom0's configuration. (There are no quotas in xenopsd to limit the quantity of keys that result in RPC traffic.) A buggy or malicious guest can cause unreasonable memory usage in dom0, resulting in a host denial of service. All versions of XAPI are vulnerable. Systems that are not using the XAPI toolstack are not vulnerable.

LibHTP is a security-aware parser for the HTTP protocol and the related bits and pieces. Version 0.5.46 may parse malformed request traffic, leading to excessive CPU usage. Version 0.5.47 contains a patch for the issue. No known workarounds are available.

An issue has been discovered in GitLab CE/EE affecting all versions starting from 15.7 prior to 16.9.7, starting from 16.10 prior to 16.10.5, and starting from 16.11 prior to 16.11.2. It was possible for an attacker to cause a denial of service by crafting unusual search terms for branch names.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine developed by the OISF and the Suricata community. When parsing an overly long SSH banner, Suricata can use excessive CPU resources, as well as cause excessive logging volume in alert records. This issue has been patched in versions 6.0.17 and 7.0.4.

In vm-superio before 0.1.1, the serial console FIFO can grow to unlimited memory usage when data is sent to the input source (i.e., standard input). This behavior cannot be reproduced from the guest side. When no rate limiting is in place, the host can be subject to memory pressure, impacting all other VMs running on the same host.

A vulnerability in the file descriptor handling of Cisco TelePresence Video Communication Server (VCS) Expressway could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to exhaustion of file descriptors while processing a high volume of traffic. An attacker could exploit this vulnerability by establishing a high number of concurrent TCP connections to the vulnerable system. An exploit could allow the attacker to cause a restart in a specific process, resulting in a temporary interruption of service. Cisco Bug IDs: CSCvh77056, CSCvh77058, CSCvh95264.

HTTP/2 incoming headers exceeding the limit are temporarily buffered in nghttp2 in order to generate an informative HTTP 413 response. If a client does not stop sending headers, this leads to memory exhaustion.

IBM WebSphere Application Server Liberty 18.0.0.2 through 24.0.0.4 is vulnerable to a denial of service, caused by sending a specially crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. IBM X-Force ID: 284574.

urllib3 is a user-friendly HTTP client library for Python. Starting in version 1.24 and prior to 2.6.0, the number of links in the decompression chain was unbounded allowing a malicious server to insert a virtually unlimited number of compression steps leading to high CPU usage and massive memory allocation for the decompressed data. This vulnerability is fixed in 2.6.0.

Kerberos 5 (aka krb5) 1.21.2 contains a memory leak vulnerability in /krb5/src/lib/gssapi/krb5/k5sealv3.c.

Insufficient file size checks resulted in a denial of service risk in the file picker's unzip functionality.

Shibboleth Identify Provider 3.x before 3.4.6 has a denial of service flaw. A remote unauthenticated attacker can cause a login flow to trigger Java heap exhaustion due to the creation of objects in the Java Servlet container session.

In Wireshark 3.2.0 to 3.2.7, the GQUIC dissector could crash. This was addressed in epan/dissectors/packet-gquic.c by correcting the implementation of offset advancement.

IBM WebSphere Application Server 8.5, 9.0 and IBM WebSphere Application Server Liberty 17.0.0.3 through 24.0.0.4 are vulnerable to a denial of service, caused by sending a specially crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. IBM X-Force ID: 281516.

LibHTP is a security-aware parser for the HTTP protocol. Crafted traffic can cause excessive processing time of HTTP headers, leading to denial of service. This issue is addressed in 0.5.46.

When SSL Client Certificate LDAP or Certificate Revocation List Distribution Point (CRLDP) authentication profile is configured on a virtual server, undisclosed requests can cause an increase in CPU resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

A denial of service is possible from excessive resource consumption in net/http and mime/multipart. Multipart form parsing with mime/multipart.Reader.ReadForm can consume largely unlimited amounts of memory and disk files. This also affects form parsing in the net/http package with the Request methods FormFile, FormValue, ParseMultipartForm, and PostFormValue. ReadForm takes a maxMemory parameter, and is documented as storing "up to maxMemory bytes +10MB (reserved for non-file parts) in memory". File parts which cannot be stored in memory are stored on disk in temporary files. The unconfigurable 10MB reserved for non-file parts is excessively large and can potentially open a denial of service vector on its own. However, ReadForm did not properly account for all memory consumed by a parsed form, such as map entry overhead, part names, and MIME headers, permitting a maliciously crafted form to consume well over 10MB. In addition, ReadForm contained no limit on the number of disk files created, permitting a relatively small request body to create a large number of disk temporary files. With fix, ReadForm now properly accounts for various forms of memory overhead, and should now stay within its documented limit of 10MB + maxMemory bytes of memory consumption. Users should still be aware that this limit is high and may still be hazardous. In addition, ReadForm now creates at most one on-disk temporary file, combining multiple form parts into a single temporary file. The mime/multipart.File interface type's documentation states, "If stored on disk, the File's underlying concrete type will be an *os.File.". This is no longer the case when a form contains more than one file part, due to this coalescing of parts into a single file. The previous behavior of using distinct files for each form part may be reenabled with the environment variable GODEBUG=multipartfiles=distinct. Users should be aware that multipart.ReadForm and the http.Request methods that call it do not limit the amount of disk consumed by temporary files. Callers can limit the size of form data with http.MaxBytesReader.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.3, excessive memory use during pgsql parsing could lead to OOM-related crashes. This vulnerability is patched in 7.0.3. As workaround, users can disable the pgsql app layer parser.

A flaw was found in the way NSS handled CCS (ChangeCipherSpec) messages in TLS 1.3. This flaw allows a remote attacker to send multiple CCS messages, causing a denial of service for servers compiled with the NSS library. The highest threat from this vulnerability is to system availability. This flaw affects NSS versions before 3.58.

Chall-Manager is a platform-agnostic system able to start Challenges on Demand of a player. The HTTP Gateway processes headers, but with no timeout set. With a slow loris attack, an attacker could cause Denial of Service (DoS). Exploitation does not require authentication nor authorization, so anyone can exploit it. It should nonetheless not be exploitable as it is highly recommended to bury Chall-Manager deep within the infrastructure due to its large capabilities, so no users could reach the system. Patch has been implemented by commit 1385bd8 and shipped in v0.1.4.

Etherpad < 1.8.3 is affected by a missing lock check which could cause a denial of service. Aggressively targeting random pad import endpoints with empty data would flatten all pads due to lack of rate limiting and missing ownership check.

XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. It's possible to make XWiki create many new schemas and fill them with tables just by using a crafted user identifier in the login form. This may lead to degraded database performance. The problem has been patched in XWiki 13.10.8, 14.6RC1 and 14.4.2. Users are advised to upgrade. There are no known workarounds for this issue.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to versions 6.0.16 and 7.0.3, an attacker can craft traffic to cause Suricata to use far more CPU and memory for processing the traffic than needed, which can lead to extreme slow downs and denial of service. This vulnerability is patched in 6.0.16 or 7.0.3. Workarounds include disabling the affected protocol app-layer parser in the yaml and reducing the `stream.reassembly.depth` value helps reduce the severity of the issue.

A Memory Allocation with Excessive Size Value vulnerablity in the TEE_Realloc function in Samsung mTower through 0.3.0 allows a trusted application to trigger a Denial of Service (DoS) by invoking the function TEE_Realloc with an excessive number for the parameter len.

Discourse is the an open source discussion platform. In affected versions an email activation route can be abused to send mass spam emails. A fix has been included in the latest stable, beta and tests-passed versions of Discourse which rate limits emails. Users are advised to upgrade. Users unable to upgrade should manually rate limit email.

Very large headers can cause resource exhaustion when parsing message. The message-parser normally reads reasonably sized chunks of the message. However, when it feeds them to message-header-parser, it starts building up "full_value" buffer out of the smaller chunks. The full_value buffer has no size limit, so large headers can cause large memory usage. It doesn't matter whether it's a single long header line, or a single header split into multiple lines. This bug exists in all Dovecot versions. Incoming mails typically have some size limits set by MTA, so even largest possible header size may still fit into Dovecot's vsz_limit. So attackers probably can't DoS a victim user this way. A user could APPEND larger mails though, allowing them to DoS themselves (although maybe cause some memory issues for the backend in general). One can implement restrictions on headers on MTA component preceding Dovecot. No publicly available exploits are known.

Versions of the package @eslint/plugin-kit before 0.2.3 are vulnerable to Regular Expression Denial of Service (ReDoS) due to improper input sanitization. An attacker can increase the CPU usage and crash the program by exploiting this vulnerability.

Hyperium Hyper before 0.14.19 does not allow for customization of the max_header_list_size method in the H2 third-party software, allowing attackers to perform HTTP2 attacks.