OpenSIS Community Edition version <= 7.6 is affected by a local file inclusion vulnerability in DownloadWindow.php via the "filename" parameter.

An issue was discovered in AfterLogic Aurora through 8.5.3 and WebMail Pro through 8.5.3, when DAV is enabled. They allow directory traversal to create new files (such as an executable file under the web root). This is related to DAVServer.php in 8.x and DAV/Server.php in 7.x.

Multiple Services such as VHS(Video History Server) and VCD(Video Clip Distributor) and Clips2 were discovered to be vulnerable to an unauthenticated arbitrary file read/write vulnerability due to missing input validation on filenames. A malicious attacker could read sensitive files from the filesystem or write/delete arbitrary files on the filesystem as well.

A file extension handling issue was found in [server] module of ONLYOFFICE DocumentServer v4.2.0.71-v5.6.0.21. The file extension is controlled by an attacker through the request data and leads to arbitrary file overwriting. Using this vulnerability, a remote attacker can obtain remote code execution on DocumentServer.

A relative path traversal vulnerability (CWE-23) in FortiWAN version 4.5.7 and below, 4.4 all versions may allow a remote non-authenticated attacker to delete files on the system by sending a crafted POST request. In particular, deleting specific configuration files will reset the Admin password to its default value.

A potential security vulnerability has been identified in the HPE Moonshot Provisioning Manager v1.20. The HPE Moonshot Provisioning Manager is an application that is installed in a VMWare or Microsoft Hyper-V environment that is used to setup and configure an HPE Moonshot 1500 chassis. This vulnerability could be remotely exploited by an unauthenticated user to cause a directory traversal in user supplied input to the `khuploadfile.cgi` CGI ELF. The directory traversal could lead to Remote Code Execution, Denial of Service, and/or compromise system integrity. **Note:** HPE recommends that customers discontinue the use of the HPE Moonshot Provisioning Manager. The HPE Moonshot Provisioning Manager application is discontinued, no longer supported, is not available to download from the HPE Support Center, and no patch is available.

IBM Tivoli Monitoring 6.3.0.7 through 6.3.0.7 Service Pack 21 could allow a remote attacker to traverse directories on the system. An attacker could send a specially crafted URL request containing "dot dot" sequences (/../) to view, overwrite, or append to arbitrary files on the system.

An arbitrary file upload vulnerability exists in the Zhiyuan OA platform via the wpsAssistServlet interface. The realFileType and fileId parameters are improperly validated during multipart file uploads, allowing unauthenticated attackers to upload crafted JSP files outside of intended directories using path traversal. Successful exploitation enables remote code execution as the uploaded file can be accessed and executed through the web server. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-01 UTC.

An issue was discovered in Mattermost Server before 3.8.2, 3.7.5, and 3.6.7. It allows an attacker to specify a full pathname of a log file.

A vulnerability, which was classified as critical, was found in zhangyanbo2007 youkefu 4.2.0. This affects an unknown part of the file WebIMController.java of the component File Upload. The manipulation of the argument ID leads to path traversal. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

Gotham Orbital-Simulator service prior to 0.692.0 was found to be vulnerable to a Path traversal issue allowing an unauthenticated user to read arbitrary files on the file system.

The package juce-framework/juce before 6.1.5 are vulnerable to Arbitrary File Write via Archive Extraction (Zip Slip) via the ZipFile::uncompressEntry function in juce_ZipFile.cpp. This vulnerability is triggered when the archive is extracted upon calling uncompressTo() on a ZipFile object.

This affects all versions of package elFinder.NetCore. The ExtractAsync function within the FileSystem is vulnerable to arbitrary extraction due to insufficient validation.

A CWE-22 Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability exists that could cause remote code execution. Affected Product: StruxureWare Data Center Expert (V7.8.1 and prior)

The package zip-local before 0.3.5 are vulnerable to Arbitrary File Write via Archive Extraction (Zip Slip) which can lead to an extraction of a crafted file outside the intended extraction directory.

This affects all versions of package elFinder.NetCore. The Path.Combine(...) method is used to create an absolute file path. Due to missing sanitation of the user input and a missing check of the generated path its possible to escape the Files directory via path traversal

Conda-build contains commands and tools to build conda packages. Prior to version 25.4.0, the conda-build processing logic is vulnerable to path traversal (Tarslip) attacks due to improper sanitization of tar entry paths. Attackers can craft tar archives containing entries with directory traversal sequences to write files outside the intended extraction directory. This could lead to arbitrary file overwrites, privilege escalation, or code execution if sensitive locations are targeted. This issue has been patched in version 25.4.0.

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in ThemeGoods Grand Restaurant WordPress allows Path Traversal.This issue affects Grand Restaurant WordPress: from n/a through 7.0.

All versions of package http-server-node are vulnerable to Directory Traversal via use of --path-as-is.

An attacker may use TWinSoft and a malicious source project file (TPG) to extract files on machine executing Ovarro TWinSoft, which could lead to code execution.

Agent processes are able to completely bypass file path filtering by wrapping the file operation in an agent file path in Jenkins 2.318 and earlier, LTS 2.303.2 and earlier.

FilePath#renameTo and FilePath#moveAllChildrenTo in Jenkins 2.318 and earlier, LTS 2.303.2 and earlier only check 'read' agent-to-controller access permission on the source path, instead of 'delete'.

The vCenter Server contains an arbitrary file upload vulnerability in the Analytics service. A malicious actor with network access to port 443 on vCenter Server may exploit this issue to execute code on vCenter Server by uploading a specially crafted file.

The vSphere Client (HTML5) contains a remote code execution vulnerability in a vCenter Server plugin. A malicious actor with network access to port 443 may exploit this issue to execute commands with unrestricted privileges on the underlying operating system that hosts vCenter Server. This affects VMware vCenter Server (7.x before 7.0 U1c, 6.7 before 6.7 U3l and 6.5 before 6.5 U3n) and VMware Cloud Foundation (4.x before 4.2 and 3.x before 3.10.1.2).

django-s3file is a lightweight file upload input for Django and Amazon S3 . In versions prior to 5.5.1 it was possible to traverse the entire AWS S3 bucket and in most cases to access or delete files. If the `AWS_LOCATION` setting was set, traversal was limited to that location only. The issue was discovered by the maintainer. There were no reports of the vulnerability being known to or exploited by a third party, prior to the release of the patch. The vulnerability has been fixed in version 5.5.1 and above. There is no feasible workaround. We must urge all users to immediately updated to a patched version.

An arbitrary file upload and directory traversal vulnerability exists in the file upload functionality of DownloadFileServlet in Draytek VigorConnect 1.6.0-B3. An unauthenticated attacker could leverage this vulnerability to upload files to any location on the target operating system with root privileges.

A path traversal vulnerability in the web interfaces of Buffalo WSR-2533DHPL2 firmware version <= 1.02 and WSR-2533DHP3 firmware version <= 1.24 could allow unauthenticated remote attackers to bypass authentication.

In Stellarium through 1.2, attackers can write to files that are typically unintended, such as ones with absolute pathnames or .. directory traversal.

Directory traversal vulnerability in MW WP Form versions v4.4.2 and earlier allows a remote unauthenticated attacker to alter the website or cause a denial-of-service (DoS) condition, and obtain sensitive information depending on settings.

Directory Traversal vulnerability found in T-ME Studios Change Color of Keypad v.1.275.1.277 allows a remote attacker to execute arbitrary code via the dex file in the internal storage.

Improper limitation of a pathname to a restricted directory ('path traversal') in Azure allows an unauthorized attacker to elevate privileges over a network.

In Jorani 1.0.0, an attacker could leverage path traversal to access files and execute code on the server.

The Syncfusion EJ2 ASPCore File Provider 3ac357f is vulnerable to Models/PhysicalFileProvider.cs directory traversal. As a result, an unauthenticated attacker can list files within a directory, download any file, or upload any file to any directory accessible by the web server.

MicroEngine Mailform version 1.1.0 to 1.1.8 contains a path traversal vulnerability. If the product's file upload function and server save option are enabled, a remote attacker may save an arbitrary file on the server and execute it.

This affects all versions of package rollup-plugin-serve. There is no path sanitization in readFile operation.

In Apache Linkis <=1.3.1, due to the Manager module engineConn material upload does not check the zip path, This is a Zip Slip issue, which will lead to a potential RCE vulnerability. We recommend users upgrade the version of Linkis to version 1.3.2.

Unauthenticated remote code execution with root privileges in Citrix SD-WAN Center versions before 11.2.2, 11.1.2b and 10.2.8

There is a vulnerability in actionpack_page-caching gem < v1.2.1 that allows an attacker to write arbitrary files to a web server, potentially resulting in remote code execution if the attacker can write unescaped ERB to a view.

Trend Micro Worry-Free Business Security (9.0, 9.5, 10.0) is affected by a directory traversal vulnerability that could allow an attacker to manipulate a key file to bypass authentication.

AnySupport (Remote support solution) before 2019.3.21.0 allows directory traversing because of swprintf function to copy file from a management PC to a client PC. This can be lead to arbitrary file execution.

A CWE-22: Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability exists in EcoStruxure Operator Terminal Expert 3.1 Service Pack 1 and prior (formerly known as Vijeo XD)which could cause arbitrary application execution when the computer starts.

dotCMS before 5.2.4 is vulnerable to directory traversal, leading to incorrect access control. It allows an attacker to read or execute files under $TOMCAT_HOME/webapps/ROOT/assets (which should be a protected directory). Additionally, attackers can upload temporary files (e.g., .jsp files) into /webapps/ROOT/assets/tmp_upload, which can lead to remote command execution (with the permissions of the user running the dotCMS application).

Honeywell Notifier Web Server (NWS) Version 3.50 is vulnerable to a path traversal attack, which allows an attacker to bypass access to restricted directories. Honeywell has released a firmware update to address the problem.

Directory traversal vulnerability in CAMS for HIS CENTUM CS 3000 (includes CENTUM CS 3000 Small) R3.08.10 to R3.09.50, CENTUM VP (includes CENTUM VP Small, Basic) R4.01.00 to R6.07.00, B/M9000CS R5.04.01 to R5.05.01, and B/M9000 VP R6.01.01 to R8.03.01 allows a remote unauthenticated attacker to create or overwrite arbitrary files and run arbitrary commands via unspecified vectors.

A vulnerability exists in the daemon process of the Yi IOT XY-3820 v6.0.24.10, which exposes a TCP service on port 6789. This service lacks proper input validation, allowing attackers to execute arbitrary scripts present on the device by sending specially crafted TCP requests using directory traversal techniques.

A remote code execution vulnerability exists in the Modules.php functionality of OS4Ed openSIS 7.3. A specially crafted HTTP request can cause local file inclusion. An attacker can send an HTTP request to trigger this vulnerability.

In BIG-IP versions 15.0.0-15.1.0.3, 14.1.0-14.1.2.5, 13.1.0-13.1.3.3, 12.1.0-12.1.5.1, and 11.6.1-11.6.5.1, the Traffic Management User Interface (TMUI), also referred to as the Configuration utility, has a Remote Code Execution (RCE) vulnerability in undisclosed pages.

A vulnerability has been found in AlliedModders AMX Mod X on Windows and classified as critical. This vulnerability affects the function cmdVoteMap of the file plugins/adminvote.sma of the component Console Command Handler. The manipulation of the argument amx_votemap leads to path traversal. The patch is identified as a5f2b5539f6d61050b68df8b22ebb343a2862681. It is recommended to apply a patch to fix this issue. VDB-217354 is the identifier assigned to this vulnerability.

A vulnerability classified as critical has been found in Calsign APDE. This affects the function handleExtract of the file APDE/src/main/java/com/calsignlabs/apde/build/dag/CopyBuildTask.java of the component ZIP File Handler. The manipulation leads to path traversal. Upgrading to version 0.5.2-pre2-alpha is able to address this issue. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-216747.

Path traversal vulnerability in SS1 Ver.13.0.0.40 and earlier and Rakuraku PC Cloud Agent Ver.2.1.8 and earlier allows a remote attacker to upload a specially crafted file to an arbitrary directory. As a result of exploiting this vulnerability with CVE-2023-22335 and CVE-2023-22344 vulnerabilities together, it may allow a remote attacker to execute an arbitrary code with SYSTEM privileges by sending a specially crafted script to the affected device.