A vulnerability in the WebUI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. The vulnerability is due to insufficient input validation of data parameters for certain fields in the affected solution. An attacker could exploit this vulnerability by configuring a malicious username on the login page of the affected solution. A successful exploit could allow the attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system.

The web-based configuration interface of the TP-Link M7350 V3 with firmware before 190531 is affected by several post-authentication command injection vulnerabilities.

An issue was discovered on D-Link DIR-818LW devices from 2.05.B03 to 2.06B01 BETA. There is a command injection in HNAP1 SetWanSettings via an XML injection of the value of the IPAddress key.

CF UAA versions prior to 74.1.0 can request scopes for a client that shouldn't be allowed by submitting an array of requested scopes. A remote malicious user can escalate their own privileges to any scope, allowing them to take control of UAA and the resources it controls.

A vulnerability, which was classified as critical, was found in AssamLook CMS 1.0. Affected is an unknown function of the file /department-profile.php. The manipulation of the argument ID leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the get_rrd function.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the ldap_search_dn function.

DrayTek Vigor3900 1.5.1.3 allows attackers to inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doSSLTunnel function.

A vulnerability in the HPE Aruba Networking ClearPass Policy Manager web-based management interface could allow an authenticated remote threat actor to conduct a remote code execution attack. Successful exploitation could enable the attacker to run arbitrary commands on the underlying operating system.

CF UAA versions prior to 74.1.0, allow external input to be directly queried against. A remote malicious user with 'client.write' and 'groups.update' can craft a SCIM query, which leaks information that allows an escalation of privileges, ultimately allowing the malicious user to gain control of UAA scopes they should not have.

Tenda G3 v3.0 v15.11.0.20 was discovered to contain a command injection vulnerability via the formSetUSBPartitionUmount function.

An issue in Beijing Digital China Yunke Information Technology Co.Ltd v.7.2.6.120 allows a remote attacker to execute arbitrary code via the code/function/dpi/web_auth/customizable.php file

A vulnerability has been found in PHPGurukul Online Birth Certificate System 2.0 and classified as critical. This vulnerability affects unknown code of the file /admin/users-applications.php. The manipulation of the argument userid leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. Any user with edit rights on a page (e.g., it's own user page), can execute arbitrary Groovy, Python or Velocity code in XWiki leading to full access to the XWiki installation. The root cause is improper escaping of the information loaded from attachments in `imported.vm`, `importinline.vm`, and `packagelist.vm`. This page is installed by default. This vulnerability has been patched in XWiki 15.0-rc-1, 14.10.1, 14.4.8, and 13.10.11. Users are advised to upgrade. There are no known workarounds for this vulnerability.

A security agent manual scan command injection vulnerability in the Trend Micro Deep Security 20 Agent could allow an attacker to escalate privileges and execute arbitrary code on an affected machine. In certain circumstances, attackers that have legitimate access to the domain may be able to remotely inject commands to other machines in the same domain. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability locally and must have domain user privileges to affect other machines.

Tenda G3 v3.0 v15.11.0.20 was discovered to contain a command injection vulnerability via the formSetDebugCfg function.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the pingtrace function.

Computrols CBAS 18.0.0 allows Authenticated Command Injection.

Delta Electronics InfraSuite Device Master versions prior to 1.0.5 contain a command injection vulnerability that could allow an attacker to inject arbitrary commands, which could result in remote code execution.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in DrayTek Vigor 2960 1.5.1.4/1.5.1.5. Affected is an unknown function of the file mainfunction.cgi of the component Web Management Interface. The manipulation of the argument password leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-222258 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

The Akuvox E11 web server backend library allows command injection in the device phone-book contacts functionality. This could allow an attacker to upload files with executable command instructions.

Improper Neutralization of Equivalent Special Elements in GitHub repository btcpayserver/btcpayserver prior to 1.7.5.

Command Injection in GitHub repository froxlor/froxlor prior to 2.0.8.

A vulnerability classified as critical has been found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This affects the function NTP of the file /goform/NTP. The manipulation of the argument manual_year_select/manual_month_select/manual_day_select/manual_hour_select/manual_min_select/manual_sec_select leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

setup.cgi on NETGEAR R6020 1.0.0.48 devices allows an admin to execute arbitrary shell commands via shell metacharacters in the ntp_server field.

A vulnerability was found in PHPGurukul Online Birth Certificate System 2.0 and classified as critical. This issue affects some unknown processing of the file /admin/all-applications.php. The manipulation of the argument del leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

NetModule NSRW web administration interface executes an OS command constructed with unsanitized user input. A successful exploit could allow an authenticated user to execute arbitrary commands with elevated privileges. This issue affects NSRW: from 4.3.0.0 before 4.3.0.119, from 4.4.0.0 before 4.4.0.118, from 4.6.0.0 before 4.6.0.105, from 4.7.0.0 before 4.7.0.103.

A vulnerability, which was classified as critical, has been found in SourceCodester Doctors Appointment System 1.0. This issue affects some unknown processing of the file /admin/edit-doc.php. The manipulation of the argument email/oldmail leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been declared as critical. Affected by this vulnerability is the function WPS of the file /goform/WPS. The manipulation of the argument PIN leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Cursor is a code editor built for programming with AI. In versions below 1.3, an attacker can bypass the allow list in auto-run mode with a backtick (`) or $(cmd). If a user has swapped Cursor from its default settings (requiring approval for every terminal call) to an allowlist, an attacker can execute arbitrary command execution outside of the allowlist without user approval. An attacker can trigger this vulnerability if chained with indirect prompt injection. This is fixed in version 1.3.

A vulnerability, which was classified as critical, has been found in TRENDnet TEW-652BRP 3.04B01. This issue affects some unknown processing of the file get_set.ccp of the component Web Management Interface. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-219935.

A vulnerability classified as critical has been found in EasyNAS 1.1.0. Affected is the function system of the file /backup.pl. The manipulation leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

Aztech WMB250AC Mesh Routers Firmware Version 016 2020 devices improperly manage sessions, which allows remote attackers to bypass authentication in opportunistic circumstances and execute arbitrary commands with administrator privileges by leveraging an existing web portal login.

Authenticated users with appropriate privileges can create policies having expressions that can exploit code execution vulnerability. This issue affects Apache Ranger: 2.3.0. Users are recommended to update to version 2.4.0.

In SyliusResourceBundle before versions 1.3.14, 1.4.7, 1.5.2 and 1.6.4, rrequest parameters injected inside an expression evaluated by `symfony/expression-language` package haven't been sanitized properly. This allows the attacker to access any public service by manipulating that request parameter, allowing for Remote Code Execution. This issue has been patched for versions 1.3.14, 1.4.7, 1.5.2 and 1.6.4. Versions prior to 1.3 were not patched.

discourse-bbcode is the official BBCode plugin for Discourse. Prior to commit 91478f5, CSS injection can occur when rendering content generated with the discourse-bccode plugin. This vulnerability only affects sites which have the discourse-bbcode plugin installed and enabled. This issue is patched in commit 91478f5. As a workaround, ensure that the Content Security Policy is enabled and monitor any posts that contain bbcode.

Arris TG2482A firmware through 9.1.103GEM9 allow Remote Code Execution (RCE) via the ping utility feature.

There is command injection in the meshd program in the routing system, resulting in command execution under administrator authority on Xiaomi router AX3600 with ROM version =< 1.1.12

In Liferay Portal before 7.3.2 and Liferay DXP 7.0 before fix pack 92, 7.1 before fix pack 18, and 7.2 before fix pack 6, the template API does not restrict user access to sensitive objects, which allows remote authenticated users to execute arbitrary code via crafted FreeMarker and Velocity templates.

XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. Any user with view rights on commonly accessible documents including the menu macro can execute arbitrary Groovy, Python or Velocity code in XWiki leading to full access to the XWiki installation due to improper escaping of the macro content and parameters of the menu macro. The problem has been patched in XWiki 14.6RC1, 13.10.8 and 14.4.3. The patch (commit `2fc20891`) for the document `Menu.MenuMacro` can be manually applied or a XAR archive of a patched version can be imported. The menu macro was basically unchanged since XWiki 11.6 so on XWiki 11.6 or later the patch for version of 13.10.8 (commit `59ccca24a`) can most likely be applied, on XWiki version 14.0 and later the versions in XWiki 14.6 and 14.4.3 should be appropriate.

D-Link COVR 1200,1202,1203 v1.08 was discovered to contain a command injection vulnerability via the /SetTriggerWPS/PIN parameter at function SetTriggerWPS.

An exploitable command execution vulnerability exists in Information Builders WebFOCUS Business Intelligence Portal 8.1 . A specially crafted web parameter can cause a command injection. An authenticated attacker can send a crafted web request to trigger this vulnerability.

D-Link COVR 1200,1202,1203 v1.08 was discovered to contain a command injection vulnerability via the system_time_timezone parameter at function SetNTPServerSettings.

A Command injection vulnerability in RaspAP 2.8.0 thru 2.9.2 allows an authenticated attacker to execute arbitrary OS commands as root via the "entity" POST parameters in /ajax/networking/get_wgkey.php.

DrayTek Vigor3900 1.5.1.3 allows attackers to inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doCertificate function.

In affected versions of Octopus Deploy it is possible for a user to introduce code via offline package creation

The web server of Hirschmann BAT-C2 before 09.13.01.00R04 allows authenticated command injection. This allows an authenticated attacker to pass commands to the shell of the system because the dir parameter of the FsCreateDir Ajax function is not sufficiently sanitized. The vendor's ID is BSECV-2022-21.

OPNsense before 25.1.8 contains an authenticated command injection vulnerability in its Bridge Interface Edit endpoint (interfaces_bridge_edit.php). The span POST parameter is concatenated into a system-level command without proper sanitization or escaping, allowing an administrator to inject arbitrary shell operators and payloads. Successful exploitation results in remote code execution with the privileges of the web service (typically root), potentially leading to full system compromise or lateral movement. This vulnerability arises from inadequate input validation and improper handling of user-supplied data in backend command invocations.

A vulnerability has been found in qianfox FoxCMS 1.2.5 and classified as critical. Affected by this vulnerability is the function batchCope of the file app/admin/controller/Article.php. The manipulation of the argument ids leads to sql injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

cruddl is software for creating a GraphQL API for a database, using the GraphQL SDL to model a schema. If cruddl starting with version 1.1.0 and prior to versions 2.7.0 and 3.0.2 is used to generate a schema that uses `@flexSearchFulltext`, users of that schema may be able to inject arbitrary AQL queries that will be forwarded to and executed by ArangoDB. Schemas that do not use `@flexSearchFulltext` are not affected. The attacker needs to have `READ` permission to at least one root entity type that has `@flexSearchFulltext` enabled. The issue has been fixed in version 3.0.2 and in version 2.7.0 of cruddl. As a workaround, users can temporarily remove `@flexSearchFulltext` from their schemas.