A vulnerability in the management and VPN web servers for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to incomplete error checking when parsing an HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to a targeted web server on a device. A successful exploit could allow the attacker to cause a DoS condition when the device reloads.
A vulnerability in the IKEv1 fragmentation code of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a heap underflow, resulting in an affected device reloading. This vulnerability exists because crafted, fragmented IKEv1 packets are not properly reassembled. An attacker could exploit this vulnerability by sending crafted UDP packets to an affected system. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. Note: Only traffic that is directed to the affected system can be used to exploit this vulnerability. This vulnerability can be triggered by IPv4 and IPv6 traffic..
A vulnerability in the DHCPv6 relay agent of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of specific fields in a DHCPv6 RELAY-REPLY message. An attacker could exploit this vulnerability by sending a crafted DHCPv6 packet to any IPv6 address that is configured on an affected device. A successful exploit could allow the attacker to cause the dhcp_snoop process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition.
A vulnerability in the Resource Reservation Protocol (RSVP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to a buffer overflow when processing crafted RSVP packets. An attacker could exploit this vulnerability by sending RSVP traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
A vulnerability in the TLS processing feature of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to an issue that occurs when TLS traffic is processed. An attacker could exploit this vulnerability by sending certain TLS traffic over IPv4 through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition and impacting traffic to and through the affected device.
A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition. This vulnerability is due to improper input validation when parsing HTTPS requests. An attacker could exploit this vulnerability by sending a malicious HTTPS request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
A vulnerability in the Common Open Policy Service (COPS) of Cisco IOS XE Software for Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, remote attacker to cause resource exhaustion, resulting in a denial of service (DoS) condition. This vulnerability is due to a deadlock condition in the code when processing COPS packets under certain conditions. An attacker could exploit this vulnerability by sending COPS packets with high burst rates to an affected device. A successful exploit could allow the attacker to cause the CPU to consume excessive resources, which prevents other control plane processes from obtaining resources and results in a DoS.
A vulnerability in the packet processing functionality of Cisco Embedded Wireless Controller (EWC) Software for Catalyst Access Points (APs) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected AP. This vulnerability is due to insufficient buffer allocation. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to exhaust available resources and cause a DoS condition on an affected AP, as well as a DoS condition for client traffic traversing the AP.
A vulnerability in Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) Mode could allow an unauthenticated, remote attacker to cause a queue wedge on a leaf switch, which could result in critical control plane traffic to the device being dropped. This could result in one or more leaf switches being removed from the fabric. This vulnerability is due to mishandling of ingress TCP traffic to a specific port. An attacker could exploit this vulnerability by sending a stream of TCP packets to a specific port on a Switched Virtual Interface (SVI) configured on the device. A successful exploit could allow the attacker to cause a specific packet queue to queue network buffers but never process them, leading to an eventual queue wedge. This could cause control plane traffic to be dropped, resulting in a denial of service (DoS) condition where the leaf switches are unavailable. Note: This vulnerability requires a manual intervention to power-cycle the device to recover.
Multiple vulnerabilities in Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to lack of proper input validation of the HTTPS request. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: This vulnerability affects only specific AnyConnect and WebVPN configurations. For more information, see the Vulnerable Products section.
A vulnerability in the VXLAN Operation, Administration, and Maintenance (OAM) feature of Cisco NX-OS Software, known as NGOAM, could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of specific packets with a Transparent Interconnection of Lots of Links (TRILL) OAM EtherType. An attacker could exploit this vulnerability by sending crafted packets, including the TRILL OAM EtherType of 0x8902, to a device that is part of a VXLAN Ethernet VPN (EVPN) fabric. A successful exploit could allow the attacker to cause an affected device to experience high CPU usage and consume excessive system resources, which may result in overall control plane instability and cause the affected device to reload. Note: The NGOAM feature is disabled by default.
Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit the vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition.
A vulnerability in the DNS application layer gateway (ALG) functionality used by Network Address Translation (NAT) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a logic error that occurs when an affected device inspects certain DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through an affected device that is performing NAT for DNS packets. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition on an affected device. The vulnerability can be exploited only by traffic that is sent through an affected device via IPv4 packets. The vulnerability cannot be exploited via IPv6 traffic.
Multiple vulnerabilities in Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to lack of proper input validation of the HTTPS request. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: This vulnerability affects only specific AnyConnect and WebVPN configurations. For more information, see the Vulnerable Products section.
Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute denial of service (DoS) attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the ingress packet processing function of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the network stack of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because the software improperly releases resources when it processes certain IPv6 packets that are destined to an affected device. An attacker could exploit this vulnerability by sending multiple crafted IPv6 packets to an affected device. A successful exploit could cause the network stack to run out of available buffers, impairing operations of control plane and management plane protocols and resulting in a DoS condition. Manual intervention would be required to restore normal operations on the affected device. For more information about the impact of this vulnerability, see the Details section of this advisory.
A vulnerability in the IPv4 protocol handling of Cisco StarOS could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a memory leak that occurs during packet processing. An attacker could exploit this vulnerability by sending a series of crafted IPv4 packets through an affected device. A successful exploit could allow the attacker to exhaust the available memory and cause an unexpected restart of the npusim process, leading to a DoS condition on the affected device.
A vulnerability in the locally significant certificate (LSC) provisioning feature of Cisco Catalyst 9800 Series Wireless Controllers that are running Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a memory leak that could lead to a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain public key infrastructure (PKI) packets. An attacker could exploit this vulnerability by sending crafted Secure Sockets Layer (SSL) packets to an affected device. A successful exploit could cause an affected device to continuously consume memory, which could result in a memory allocation failure that leads to a crash and causes a DoS condition.
A vulnerability in Cisco SD-WAN Solution Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper validation of fields in Cisco SD-WAN peering messages that are encapsulated in UDP packets. An attacker could exploit this vulnerability by sending crafted UDP messages to the targeted system. A successful exploit could allow the attacker to cause services on the device to fail, resulting in a DoS condition that could impact the targeted device and other devices that depend on it.
A vulnerability in Cisco Enterprise Network Functions Virtualization Infrastructure Software (NFVIS) could allow an authenticated, remote attacker with administrator privileges to overwrite files on the underlying operating system (OS) of an affected device. The vulnerability is due to improper input validation in an NFVIS file-system command. An attacker could exploit this vulnerability by using crafted variables during the execution of an affected command. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying OS.
STCAPP (aka the SCCP telephony control application) on Cisco IOS before 15.0(1)XA1 does not properly handle multiple calls to a shared line, which allows remote attackers to cause a denial of service (port hang) by simultaneously ending two calls that were controlled by CallManager Express (CME), aka Bug ID CSCtd42552.
A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device that is running in multi-instance mode. This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.
A vulnerability in the Cisco Fabric Services component of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause process crashes, which can result in a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient validation of TCP packets when processed by the Cisco Fabric Services over IP (CFSoIP) feature. An attacker could exploit this vulnerability by sending a malicious Cisco Fabric Services TCP packet to an affected device. A successful exploit could allow the attacker to cause process crashes, resulting in a device reload and a DoS condition. Note: There are three distribution methods that can be configured for Cisco Fabric Services. This vulnerability affects only distribution method CFSoIP, which is disabled by default. See the Details section for more information.
A vulnerability in the Object Linking & Embedding (OLE2) file scanning functionality of Clam AntiVirus (ClamAV) Software versions 0.101.1 and prior could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to a lack of proper input and validation checking mechanisms for OLE2 files sent an affected device. An attacker could exploit this vulnerability by sending malformed OLE2 files to the device running an affected version ClamAV Software. An exploit could allow the attacker to cause an out-of-bounds write condition, resulting in a crash that could result in a denial of service condition on an affected device.
A vulnerability in Cisco Remote PHY Device Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability occurs because the affected software improperly sanitizes user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying various CLI commands with crafted arguments. A successful exploit could allow the attacker to run arbitrary commands as the root user, allowing complete compromise of the system.
A vulnerability in the web-based management interface of Session Initiation Protocol (SIP) Software for Cisco IP Phone 7800 Series and Cisco IP Phone 8800 Series could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code. The vulnerability exists because the software improperly validates user-supplied input during user authentication. An attacker could exploit this vulnerability by connecting to an affected device using HTTP and supplying malicious user credentials. A successful exploit could allow the attacker to trigger a reload of an affected device, resulting in a DoS condition, or to execute arbitrary code with the privileges of the app user. Cisco fixed this vulnerability in the following SIP Software releases: 10.3(1)SR5 and later for Cisco Unified IP Conference Phone 8831; 11.0(4)SR3 and later for Cisco Wireless IP Phone 8821 and 8821-EX; and 12.5(1)SR1 and later for the rest of the Cisco IP Phone 7800 Series and 8800 Series.
Cisco IOS before 12.2(33)SXI allows remote authenticated users to cause a denial of service (device reboot).
Unspecified vulnerability in the SunRPC inspection feature on the Cisco Firewall Services Module (FWSM) with software 3.1 before 3.1(17.2), 3.2 before 3.2(16.1), 4.0 before 4.0(10.1), and 4.1 before 4.1(1.1) for Catalyst 6500 series switches and 7600 series routers allows remote attackers to cause a denial of service (device reload) via crafted SunRPC messages, aka Bug ID CSCte61622.
A vulnerability in the application programming interface (API) of Cisco Smart Software Manager On-Prem could allow an unauthenticated, remote attacker to change user account information which can prevent users from logging in, resulting in a denial of service (DoS) condition of the web interface. The vulnerability is due to the lack of input validation in the API. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. An exploit could allow the attacker to change or corrupt user account information which could grant the attacker administrator access or prevent legitimate user access to the web interface, resulting in a denial of service (DoS) condition.
Cisco IOS 15.1(2)T allows remote attackers to cause a denial of service (resource consumption and TCP outage) via spoofed TCP packets, related to embryonic TCP connections that remain in the SYN_RCVD or SYN_SENT state, aka Bug ID CSCti18193.
The Presence Engine (PE) service in Cisco Unified Presence 6.x before 6.0(7) and 7.x before 7.0(8) does not properly handle an erroneous Contact field in the header of a SIP SUBSCRIBE message, which allows remote attackers to cause a denial of service (process failure) via a malformed message, aka Bug ID CSCtd39629.
A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI utility. The attacker must be authenticated to access the CLI utility. A successful exploit could allow the attacker to execute commands with root privileges.
The SIP implementation on the Cisco PGW 2200 Softswitch with software 9.7(3)S before 9.7(3)S11 and 9.7(3)P before 9.7(3)P11 allows remote attackers to cause a denial of service (device crash) via a long message, aka Bug ID CSCsk44115.
The SIP implementation on the Cisco PGW 2200 Softswitch with software 9.7(3)S before 9.7(3)S9 and 9.7(3)P before 9.7(3)P9 allows remote attackers to cause a denial of service (device crash) via a malformed header, aka Bug ID CSCsk04588.
The SIP implementation on the Cisco PGW 2200 Softswitch with software 9.7(3)S before 9.7(3)S9 and 9.7(3)P before 9.7(3)P9 allows remote attackers to cause a denial of service (device crash) via a malformed Contact header, aka Bug ID CSCsj98521.
Cisco Prime Network Services Controller 3.0 allows local users to bypass intended access restrictions and execute arbitrary commands via additional parameters to an unspecified command, aka Bug ID CSCus99427.
The Cisco Content Services Switch (CSS) 11500 with software before 8.20.4.02 and the Application Control Engine (ACE) 4710 with software before A2(3.0) do not properly handle use of LF, CR, and LFCR as alternatives to the standard CRLF sequence between HTTP headers, which allows remote attackers to bypass intended header insertions or conduct HTTP request smuggling attacks via crafted header data, as demonstrated by LF characters preceding ClientCert-Subject and ClientCert-Subject-CN headers, aka Bug ID CSCta04885.
The SIP implementation on the Cisco PGW 2200 Softswitch with software before 9.8(1)S5 allows remote attackers to cause a denial of service (device crash) via a malformed header, aka Bug ID CSCsz13590.
The USB driver in Cisco Firepower Extensible Operating System 1.1(1.160) on Firepower 9000 devices allows physically proximate attackers to cause a denial of service via a crafted USB device that triggers invalid USB commands, aka Bug ID CSCux10531.
The rule-update feature in Cisco FireSIGHT Management Center (MC) 5.2 through 5.4.0.1 does not verify the X.509 certificate of the support.sourcefire.com SSL server, which allows man-in-the-middle attackers to spoof this server and provide an invalid package, and consequently execute arbitrary code, via a crafted certificate, aka Bug ID CSCuw06444.
Cisco AsyncOS before 8.5.7-043, 9.x before 9.1.1-023, and 9.5.x and 9.6.x before 9.6.0-046 on Email Security Appliance (ESA) devices mishandles malformed fields during body-contains, attachment-contains, every-attachment-contains, attachment-binary-contains, dictionary-match, and attachment-dictionary-match filtering, which allows remote attackers to cause a denial of service (memory consumption) via a crafted attachment in an e-mail message, aka Bug ID CSCuv47151.
The web interface in Cisco Firepower Extensible Operating System 1.1(1.160) on Firepower 9000 devices does not properly restrict use of IFRAME elements, which makes it easier for remote attackers to conduct clickjacking attacks and unspecified other attacks via a crafted web site, aka Bug ID CSCux10604.
Cisco Emergency Responder 10.5(3.10000.9) allows remote attackers to upload files to arbitrary locations via a crafted parameter, aka Bug ID CSCuv25501.
Cisco NX-OS 7.1(1)N1(1) on Nexus 5500, 5600, and 6000 devices does not properly validate PDUs in SNMP packets, which allows remote attackers to cause a denial of service (SNMP application restart) via a crafted packet, aka Bug ID CSCut84645.
Cisco IOS 15.2(04)M and 15.4(03)M lets physical-interface ACLs supersede virtual PPP interface ACLs, which allows remote authenticated users to bypass intended network-traffic restrictions in opportunistic circumstances by using PPP, aka Bug ID CSCur61303.
Cisco TFTP Server 1.1 allows remote attackers to cause a denial of service (daemon crash) via a crafted (1) read (aka RRQ) or (2) write (aka WRQ) request, or other TFTP packet. NOTE: some of these details are obtained from third party information.
Cisco ASR 5000 devices with software 19.0.M0.60828 allow remote attackers to cause a denial of service (OSPF process restart) via crafted length fields in headers of OSPF packets, aka Bug ID CSCuv62820.
Cisco IOS XE 2.x and 3.x before 3.10.6S, 3.11.xS through 3.13.xS before 3.13.3S, and 3.14.xS through 3.15.xS before 3.15.1S allows remote attackers to cause a denial of service (device reload) via IPv4 packets that require NAT and MPLS actions, aka Bug ID CSCut96933.
The JavaServer Pages (JSP) component in Cisco Integrated Management Controller (IMC) Supervisor before 1.0.0.1 and UCS Director (formerly Cloupia Unified Infrastructure Controller) before 5.2.0.1 allows remote attackers to write to arbitrary files via crafted HTTP requests, aka Bug IDs CSCus36435 and CSCus62625.