RobotsAndPencils go-saml, a SAML client library written in Go, contains an authentication bypass vulnerability in all known versions. This is due to how the `xmlsec1` command line tool is called internally to verify the signature of SAML assertions. When `xmlsec1` is used without defining the enabled key data, the origin of the public key for the signature verification is, unfortunately, not restricted. That means an attacker can sign the SAML assertions themselves and provide the required public key (e.g. an RSA key) directly embedded in the SAML token. Projects still using RobotsAndPencils/go-saml should move to another SAML library or alternatively remove support for SAML from their projects. The vulnerability can likely temporarily be fixed by forking the go-saml project and adding the command line argument `--enabled-key-data` and specifying a value such as `x509` or `raw-x509-cert` when calling the `xmlsec1` binary in the verify function. Please note that this workaround must be carefully tested before it can be used.

The vRealize Operations Manager API (8.x prior to 8.5) contains a broken access control vulnerability leading to unauthenticated API access. An unauthenticated malicious actor with network access to the vRealize Operations Manager API can add new nodes to existing vROps cluster.

wolfssl before 3.2.0 has a server certificate that is not properly authorized for server authentication.

Zoho ManageEngine Applications Manager 14780 and before allows a remote unauthenticated attacker to register managed servers via AAMRequestProcessor servlet.

An issue was discovered in Western Bridge Cobub Razor 0.7.2. Authentication is not required for /index.php?/install/installation/createuserinfo requests, resulting in account creation.

Cryptographic issue while performing attach with a LTE network, a rogue base station can skip the authentication phase and immediately send the Security Mode Command.

Improper authentication vulnerability in GOT2000 series GT27 model VNC server versions 01.39.010 and prior, GOT2000 series GT25 model VNC server versions 01.39.010 and prior, GOT2000 series GT21 model GT2107-WTBD VNC server versions 01.40.000 and prior, GOT2000 series GT21 model GT2107-WTSD VNC server versions 01.40.000 and prior, GOT SIMPLE series GS21 model GS2110-WTBD-N VNC server versions 01.40.000 and prior and GOT SIMPLE series GS21 model GS2107-WTBD-N VNC server versions 01.40.000 and prior allows a remote unauthenticated attacker to gain unauthorized access via specially crafted packets when the "VNC server" function is used.

CloudExplorer Lite is an open source, lightweight cloud management platform. Prior to version 1.4.1, the gateway filter of CloudExplorer Lite uses a controller with path starting with `matching/API/`, which can cause a permission bypass. Version 1.4.1 contains a patch for this issue.

A vulnerability has been identified in SPPA-T3000 Application Server (All versions < Service Pack R8.2 SP2). An attacker with network access to the Application Server could be able to upload arbitrary files without authentication. Please note that an attacker needs to have network access to the Application Server in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

Soft Serve is a self-hostable Git server for the command line. Prior to version 0.6.2, a security vulnerability in Soft Serve could allow an unauthenticated, remote attacker to bypass public key authentication when keyboard-interactive SSH authentication is active, through the `allow-keyless` setting, and the public key requires additional client-side verification for example using FIDO2 or GPG. This is due to insufficient validation procedures of the public key step during SSH request handshake, granting unauthorized access if the keyboard-interaction mode is utilized. An attacker could exploit this vulnerability by presenting manipulated SSH requests using keyboard-interactive authentication mode. This could potentially result in unauthorized access to the Soft Serve. Users should upgrade to the latest Soft Serve version `v0.6.2` to receive the patch for this issue. To workaround this vulnerability without upgrading, users can temporarily disable Keyboard-Interactive SSH Authentication using the `allow-keyless` setting.

Authentication Bypass resulting in exposure of SD-WAN functionality in Citrix SD-WAN Center versions before 11.2.2, 11.1.2b and 10.2.8

Shopware is an open commerce platform based on the Symfony php Framework and the Vue javascript framework. In versions prior to 6.4.8.2 it is possible to modify customers and to create orders without App Permission. This issue is a result of improper api route checking. Users are advised to upgrade to version 6.4.8.2. There are no known workarounds.

reset-password.php in ProjectSend before r1295 allows remote attackers to reset a password because of incorrect business logic. Errors are not properly considered (an invalid token parameter).

The wpo365-login plugin before v11.7 for WordPress allows use of a symmetric algorithm to decrypt a JWT token. This leads to authentication bypass.

strapi is an open-source headless CMS. Versions prior to 4.13.1 did not properly restrict write access to fielded marked as private in the user registration endpoint. As such malicious users may be able to errantly modify their user records. This issue has been addressed in version 4.13.1. Users are advised to upgrade. There are no known workarounds for this vulnerability.

An issue was discovered on Samsung mobile devices with P(9.0) software. The Settings application allows unauthenticated changes. The Samsung IDs are SVE-2019-13814, SVE-2019-13815 (March 2019).

An issue was discovered on Samsung mobile devices with P(9.0) software. The Pin Window feature allows unauthenticated unpinning of an app. The Samsung ID is SVE-2018-13765 (March 2019).

An issue was discovered on Samsung mobile devices with O(8.x) and P(9.0) software. Attackers can change the USB configuration without authentication. The Samsung ID is SVE-2018-13300 (September 2019).

The json-jwt gem before 1.11.0 for Ruby lacks an element count during the splitting of a JWE string.

ColdFusion versions 2023.6, 2021.12 and earlier are affected by an Improper Authentication vulnerability that could result in privilege escalation. An attacker could exploit this vulnerability to gain unauthorized access and affect the integrity of the application. Exploitation of this issue does not require user interaction.

Browsing the admin.html page allows the user to reset the admin password. Also appears in the JS code for the password.

Auth0 auth0.net before 6.5.4 has Incorrect Access Control because IdentityTokenValidator can be accidentally used to validate untrusted ID tokens.

includes/wizard/wizard.php in the Ocean Extra plugin through 1.5.8 for WordPress allows unauthenticated options changes and injection of a Cascading Style Sheets (CSS) token sequence.

An authentication bypass vulnerability exists in Suprema BioStar 2 before 2.9.1, which allows unauthenticated users to access some functionality on BioStar 2 servers.

OPC UA .NET Standard Stack allows a remote attacker to bypass the application authentication check via crafted fake credentials.

NiceGUI is an easy-to-use, Python-based UI framework. Prior to 2.9.1, authenticating with NiceGUI logged in the user for all browsers, including browsers in incognito mode. This vulnerability is fixed in 2.9.1.

A vulnerability in the Dialer interface feature for ISDN connections in Cisco IOS XE Software for Cisco 4000 Series Integrated Services Routers (ISRs) could allow an unauthenticated, adjacent attacker to pass IPv4 traffic through an ISDN channel prior to successful PPP authentication. The vulnerability is due to insufficient validation of the state of the PPP IP Control Protocol (IPCP). An attacker could exploit this vulnerability by making an ISDN call to an affected device and sending traffic through the ISDN channel prior to successful PPP authentication. Alternatively, an unauthenticated, remote attacker could exploit this vulnerability by sending traffic through an affected device that is configured to exit via an ISDN connection for which both the Dialer interface and the Basic Rate Interface (BRI) have been configured, but the Challenge Handshake Authentication Protocol (CHAP) password for PPP does not match the remote end. A successful exploit could allow the attacker to pass IPv4 traffic through an unauthenticated ISDN connection for a few seconds, from initial ISDN call setup until PPP authentication fails.

Duo Network Gateway 1.2.9 and earlier may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers.

Wizkunde SAMLBase may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers.

The owned function of a smart contract implementation for DDQ, an tradable Ethereum ERC20 token, allows attackers to change the owner of the contract, because the function does not check the caller's identity.

The ToOwner() function of a smart contract implementation for Cryptbond Network (CBN), an tradable Ethereum ERC20 token, allows attackers to change the owner of the contract, because the function does not check the caller's identity.

The quaker function of a smart contract implementation for BOMBBA (BOMB), an tradable Ethereum ERC20 token, allows attackers to change the owner of the contract, because the function does not check the caller's identity.

The NETM() function of a smart contract implementation for NewIntelTechMedia (NETM), an tradable Ethereum ERC20 token, allows attackers to change the owner of the contract, because the function does not check the caller's identity.

Broken access controls on PDFtron WebviewerUI in M-Files Hubshare before 3.3.11.3 allows unauthenticated attackers to upload malicious files to the application server.

An issue was discovered on D-Link DIR-850L 1.21WW devices. A partially completed WPA handshake is sufficient for obtaining full access to the wireless network. A client can access the network by sending packets on Data Frames to the AP without encryption.

A vulnerability in Metasys ADS/ADX/OAS 10 versions prior to 10.1.5 and Metasys ADS/ADX/OAS 11 versions prior to 11.0.2 allows unverified password change.

The Very Simple Contact Form WordPress plugin before 11.6 exposes the solution to the captcha in the rendered contact form, both as hidden input fields and as plain text in the page, making it very easy for bots to bypass the captcha check, rendering the page a likely target for spam bots.

In JetBrains Ktor before 1.6.4, nonce verification during the OAuth2 authentication process is implemented improperly.

ONLYOFFICE all versions as of 2021-11-08 is affected by Incorrect Access Control. Signed document download URLs can be forged due to a weak default URL signing key.

Netskope was notified about a security gap in Netskope Client enrollment process where NSClient is using a static token “Orgkey” as authentication parameter. Since this is a static token, if leaked, cannot be rotated or revoked. A malicious actor can use this token to enroll NSClient from a customer’s tenant and impersonate a user.

A vulnerability has been identified in SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (V4.5.0). Affected devices fail to authenticate against configured passwords when provisioned using TIA Portal V13. This could allow an attacker using TIA Portal V13 or later versions to bypass authentication and download arbitrary programs to the PLC. The vulnerability does not occur when TIA Portal V13 SP1 or any later version was used to provision the device.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.7, FreeSWITCH does not authenticate SIP MESSAGE requests, leading to spam and message spoofing. By default, SIP requests of the type MESSAGE (RFC 3428) are not authenticated in the affected versions of FreeSWITCH. MESSAGE requests are relayed to SIP user agents registered with the FreeSWITCH server without requiring any authentication. Although this behaviour can be changed by setting the `auth-messages` parameter to `true`, it is not the default setting. Abuse of this security issue allows attackers to send SIP MESSAGE messages to any SIP user agent that is registered with the server without requiring authentication. Additionally, since no authentication is required, chat messages can be spoofed to appear to come from trusted entities. Therefore, abuse can lead to spam and enable social engineering, phishing and similar attacks. This issue is patched in version 1.10.7. Maintainers recommend that this SIP message type is authenticated by default so that FreeSWITCH administrators do not need to be explicitly set the `auth-messages` parameter. When following such a recommendation, a new parameter can be introduced to explicitly disable authentication.

In JetBrains TeamCity before 2021.1.1, insufficient authentication checks for agent requests were made.

An issue was discovered in Dropbear through 2020.81. Due to a non-RFC-compliant check of the available authentication methods in the client-side SSH code, it is possible for an SSH server to change the login process in its favor. This attack can bypass additional security measures such as FIDO2 tokens or SSH-Askpass. Thus, it allows an attacker to abuse a forwarded agent for logging on to another server unnoticed.

An issue was discovered in Midnight Commander through 4.8.26. When establishing an SFTP connection, the fingerprint of the server is neither checked nor displayed. As a result, a user connects to the server without the ability to verify its authenticity.

An issue was discovered on Samsung mobile devices with M(6.0) and N(7.0, 7.1) software. An unauthenticated attacker can register a new security certificate. The Samsung ID is SVE-2017-9659 (September 2017).

The optional ActiveMQ LDAP login module can be configured to use anonymous access to the LDAP server. In this case, for Apache ActiveMQ Artemis prior to version 2.16.0 and Apache ActiveMQ prior to versions 5.16.1 and 5.15.14, the anonymous context is used to verify a valid users password in error, resulting in no check on the password.

Improper MDM policy management vulnerability in KME module prior to KCS version 1.39 allows MDM users to bypass Knox Manage authentication.