D-Link DIR-842 fw_revA_1-02_eu_multi_20151008 was discovered to contain multiple buffer overflows in the fgets function via the acStack_120 and acStack_220 parameters.

A vulnerability, which was classified as critical, has been found in Tenda i22 1.0.0.3(4687). This issue affects the function formApPortalOneKeyAuth of the file /goform/apPortalOneKeyAuth. The manipulation of the argument data leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Some Kyocera printers (such as the ECOSYS M5526cdw 2R7_2000.001.701) were affected by a buffer overflow vulnerability in the URI paths of the web application that would allow an unauthenticated attacker to perform a Denial of Service attack, crashing the device, or potentially execute arbitrary code on the device.

Some Kyocera printers (such as the ECOSYS M5526cdw 2R7_2000.001.701) were affected by multiple buffer overflow vulnerabilities in the IPP service. This would allow an unauthenticated attacker to cause a Denial of Service (DoS), and potentially execute arbitrary code on the device.

Some Kyocera printers (such as the ECOSYS M5526cdw 2R7_2000.001.701) were affected by a buffer overflow vulnerability in the okhtmlfile and failhtmlfile parameters of several functionalities of the web application that would allow an unauthenticated attacker to perform a Denial of Service attack, crashing the device, or potentially execute arbitrary code on the device.

Anviz CrossChex access control management software 4.3.8.0 and 4.3.12 is vulnerable to a buffer overflow vulnerability.

Wind River VxWorks 6.7 though 6.9 and vx7 has a Buffer Overflow in the TCP component (issue 3 of 4). This is an IPNET security vulnerability: TCP Urgent Pointer state confusion during connect() to a remote host.

D-Link DIR-880 A1_FW107WWb08 was discovered to contain a buffer overflow via the function FUN_0001be68.

D-Link DIR-868L fw_revA_1-12_eu_multi_20170316 was discovered to contain a buffer overflow via the acStack_50 parameter.

D-Link DIR-880 A1_FW107WWb08 was discovered to contain a buffer overflow via the function fgets.

Wind River VxWorks 6.9 and vx7 has a Buffer Overflow in the IPv4 component. There is an IPNET security vulnerability: Stack overflow in the parsing of IPv4 packets’ IP options.

A vulnerability, which was classified as critical, was found in TOTOLINK CP450 4.1.0cu.747_B20191224. Affected is the function loginauth of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument http_host leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-273558 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered in Tenda W20E V4.0br_V15.11.0.6. Attackers may send overly long `addDhcpRules` data. When these rules enter the `addDhcpRule` function and are processed by `ret = sscanf(pRule, " %d\t%[^\t]\t%[^\n\r\t]", &dhcpsIndex, dhcpsIP, dhcpsMac);`, the lack of size validation for the rules could lead to buffer overflows in `dhcpsIndex`, `dhcpsIP`, and `dhcpsMac`.

Insufficient boundary checks when processing a string in mb_ereg_replace allows access to out-of-bounds memory. This issue affects HHVM versions prior to 3.30.12, all versions between 4.0.0 and 4.8.5, all versions between 4.9.0 and 4.23.1, as well as 4.24.0, 4.25.0, 4.26.0, 4.27.0, 4.28.0, and 4.28.1.

Wind River VxWorks 6.9 and vx7 has a Buffer Overflow in the TCP component (issue 2 of 4). This is an IPNET security vulnerability: TCP Urgent Pointer state confusion caused by a malformed TCP AO option.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. This issue affects the function cgi_del_photo of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument current_path leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

A buffer overflow vulnerability exists in the GetValue functionality of TCL LinkHub Mesh Wi-Fi MS1G_00_01.00_14. A specially-crafted configuration value can lead to a buffer overflow. An attacker can modify a configuration value to trigger this vulnerability.This vulnerability represents all occurances of the buffer overflow vulnerability within the cfm binary.

Buffer overflow in WLAN NAN function due to lack of check of count value received in NAN availability attribute in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in IPQ8074, MSM8996AU, QCA6174A, QCA6574AU, QCA8081, QCA9377, QCA9379, QCS404, QCS405, QCS605, SD 636, SD 665, SD 675, SD 712 / SD 710 / SD 670, SD 730, SD 820, SD 835, SD 845 / SD 850, SD 855, SD 8CX, SDA660, SDM630, SDM660, SXR1130

Filling media attribute tag names without validating the destination buffer size which can result in the buffer overflow in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8096AU, APQ8098, MDM9150, MDM9205, MDM9206, MDM9607, MDM9615, MDM9625, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCM2150, QCS605, QM215, Rennell, SC8180X, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SXR1130

While playing the clip which is nonstandard buffer overflow can occur while parsing in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in MDM9206, MDM9607, MSM8909W, MSM8996AU, QCA6574AU, QCS405, QCS605, Qualcomm 215, SD 210/SD 212/SD 205, SD 425, SD 427, SD 430, SD 435, SD 439 / SD 429, SD 450, SD 600, SD 615/16/SD 415, SD 625, SD 632, SD 636, SD 665, SD 675, SD 712 / SD 710 / SD 670, SD 730, SD 820, SD 820A, SD 835, SD 845 / SD 850, SD 855, SDA660, SDM439, SDM630, SDM660, SDX20

Buffer overflow can occur when processing non standard SDP video Image attribute parameter in a VILTE\VOLTE call in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8076, APQ8096, APQ8096AU, APQ8098, MDM9150, MDM9206, MDM9607, MDM9640, MDM9645, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCM2150, QCS605, QM215, Rennell, SC8180X, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SXR1130

General Device Manager 2.5.2.2 is vulnerable to Buffer Overflow.

Position determination accuracy may be degraded due to wrongly decoded information in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Wearables in APQ8053, MDM9206, MDM9207C, MDM9607, MDM9615, MDM9625, MDM9635M, MDM9640, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8939, MSM8940, MSM8953, MSM8976, MSM8996AU, MSM8998, Nicobar, QCM2150, QCS605, QM215, SDA660, SDA845, SDM429, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX24, SDX55, SM6150, SM7150, SM8150, SM8250, Snapdragon_High_Med_2016, SXR1130, SXR2130

Buffer Overflow vulnerability in Vigor2620/LTE200 3.9.8.9 and earlier and Vigor2860/2925 3.9.8 and earlier and Vigor2862/2926 3.9.9.5 and earlier and Vigor2133/2762/2832 3.9.9 and earlier and Vigor165/166 4.2.7 and earlier and Vigor2135/2765/2766 4.4.5.1 and earlier and Vigor2865/2866/2927 4.4.5.3 and earlier and Vigor2962/3910 4.3.2.8/4.4.3.1 and earlier and Vigor3912 4.3.6.1 and earlier allows a remote attacker to execute arbitrary code via the CGI parser's handling of the "Content-Length" header of HTTP POST requests.

Lack of length check of response buffer can lead to buffer over-flow while GP command response buffer handling in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8017, APQ8053, APQ8098, MDM9206, MDM9607, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8998, QM215, SDA660, SDM429, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660

Buffer Overflow vulnerability in Tenda Ac19 v.1.0, AC18, AC9 v.1.0, AC6 v.2.0 and v.1.0 allows a remote attacker to execute arbitrary code via the formSetCfm function in bin/httpd.

The deprecated compatibility function clnt_create in the sunrpc module of the GNU C Library (aka glibc) through 2.34 copies its hostname argument on the stack without validating its length, which may result in a buffer overflow, potentially resulting in a denial of service or (if an application is not built with a stack protector enabled) arbitrary code execution.

An issue was discovered in the base64d function in the SMTP listener in Exim before 4.90.1. By sending a handcrafted message, a buffer overflow may happen. This can be used to execute code remotely.

An issue was discovered on Samsung mobile devices with O(8.1) and P(9.0) (Exynos chipsets) software. load_kernel has a buffer overflow via untrusted data. The Samsung ID is SVE-2019-14939 (September 2019).

An issue was discovered on Samsung mobile devices with O(8.x) and P(9.0) (Exynos chipsets) software. A buffer overflow in the HDCP Trustlet affects secure TEEGRIS memory. The Samsung ID is SVE-2019-15283 (November 2019).

A security vulnerability within Ivanti Avalanche Manager before version 6.4.1 may allow an unauthenticated attacker to create a buffer overflow that could result in service disruption or arbitrary code execution.

Architectural Information System 1.0 and earlier versions have a Stack-based buffer overflow, allows remote attackers to execute arbitrary code.

An issue was discovered on Samsung mobile devices with P(9.0) (Exynos 9820 chipsets) software. A Buffer overflow occurs when loading the UH Partition during Secure Boot. The Samsung ID is SVE-2019-14412 (August 2019).

D-Link DIR-820L 1.05B03 has a stack overflow vulnerability in the sub_451208 function.

Potential buffer overflow vulnerability in the Zephyr CAN bus subsystem

Buffer Overflow vulnerability in SunBK201 umicat through v.0.3.2 and fixed in v.0.3.3 allows an attacker to execute arbitrary code via the power(uct_int_t x, uct_int_t n) in src/uct_upstream.c.

NETGEAR WNR2000v3 devices before 1.1.2.14, WNR2000v4 devices before 1.0.0.66, and WNR2000v5 devices before 1.0.0.42 allow authentication bypass and remote code execution via a buffer overflow that uses a parameter in the administration webapp. The NETGEAR ID is PSV-2016-0261.

Firecracker vsock implementation buffer overflow in versions 0.18.0 and 0.19.0. This can result in potentially exploitable crashes.

Buffer overflow in system firmware for EDK II may allow unauthenticated user to potentially enable escalation of privilege and/or denial of service via network access.

A Structured Exception Handler (SEH) based buffer overflow in File Sharing Wizard 1.5.0 26-8-2008 allows remote unauthenticated attackers to execute arbitrary code via the HTTP DELETE method, a similar issue to CVE-2019-16724 and CVE-2010-2331.

FreeRDP prior to version 2.0.0-rc4 contains a Heap-Based Buffer Overflow in function zgfx_decompress_segment() that results in a memory corruption and probably even a remote code execution.

Multiple Buffer overflows in the MMS Client in MZ Automation LibIEC61850 before commit 1f52be9ddeae00e69cd43e4cac3cb4f0c880c4f0 allow a malicious server to cause a stack-based buffer overflow via the MMS IdentifyResponse message.

Multiple Buffer overflows in the MMS Client in MZ Automation LibIEC61850 before commit ac925fae8e281ac6defcd630e9dd756264e9c5bc allow a malicious server to cause a stack-based buffer overflow via the MMS FileDirResponse message.

TightVNC code version 1.3.10 contains global buffer overflow in HandleCoRREBBP macro function, which can potentially result code execution. This attack appear to be exploitable via network connectivity.

TOTOLINK AC1200 T8 v4.1.5cu.861_B20230220 has a buffer overflow vulnerability in the setWiFiAclRules function via the desc parameter.

TOTOLINK AC1200 T8 v4.1.5cu.861_B20230220 has a buffer overflow vulnerability in the setWizardCfg function via the ssid5g parameter.

Tenda CH22 V1.0.0.6(468) has a stack overflow vulnerability located in the frmL7PlotForm function.