SVR-116 firmware version 1.6.0.30028871 allows a remote authenticated attacker with an administrative privilege to execute arbitrary OS commands by sending a specially crafted request to the product.

Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the REST and SOAP API endpoints of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker with administrative privileges on the DCNM application to inject arbitrary commands on the underlying operating system (OS). For more information about these vulnerabilities, see the Details section of this advisory. Note: The severity of these vulnerabilities is aggravated by the vulnerabilities described in the Cisco Data Center Network Manager Authentication Bypass Vulnerabilities advisory, published simultaneously with this one.

NetModule NSRW web administration interface executes an OS command constructed with unsanitized user input. A successful exploit could allow an authenticated user to execute arbitrary commands with elevated privileges. This issue affects NSRW: from 4.3.0.0 before 4.3.0.119, from 4.4.0.0 before 4.4.0.118, from 4.6.0.0 before 4.6.0.105, from 4.7.0.0 before 4.7.0.103.

A remote attacker with high privileges may use a writing file function to inject OS commands.

The restricted shell interface in UCOPIA Wireless Appliance before 5.1.8 allows remote authenticated users to gain 'admin' privileges via shell metacharacters in the less command.

The parameters $cache_path, $wp_cache_debug_ip, $wp_super_cache_front_page_text, $cache_scheduled_time, $cached_direct_pages used in the settings of WP Super Cache WordPress plugin before 1.7.3 result in RCE because they allow input of '$' and '\n'. This is due to an incomplete fix of CVE-2021-24209.

A command injection vulnerability is present in the web management interface of ArubaOS that permits an authenticated user to execute arbitrary commands on the underlying operating system. A malicious administrator could use this ability to install backdoors or change system configuration in a way that would not be logged. This vulnerability only affects ArubaOS 8.x.

A command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow remote attackers who have gained administrator access to execute arbitrary commands. We have already fixed the vulnerability in the following versions: QuFirewall 2.3.3 ( 2023/03/27 ) and later and later

An exploitable command injection vulnerability exists in the cloud connectivity functionality of WAGO PFC200 versions 03.02.02(14), 03.01.07(13), and 03.00.39(12). An attacker can inject operating system commands into the TimeoutPrepared parameter value contained in the firmware update command.

Sewio’s Real-Time Location System (RTLS) Studio version 2.0.0 up to and including version 2.6.2 does not properly validate the input module name to the backup services of the software. This could allow a remote attacker to access sensitive functions of the application and execute arbitrary system commands.

An exploitable command injection vulnerability exists in the Cloud Connectivity functionality of WAGO PFC200 Firmware versions 03.02.02(14), 03.01.07(13), and 03.00.39(12). An attacker can inject OS commands into the TimeoutUnconfirmed parameter value contained in the Firmware Update command.

The Unlimited Elements For Elementor (Free Widgets, Addons, Templates) plugin for WordPress is vulnerable to command injection in all versions up to, and including, 1.5.102. This is due to insufficient filtering of template attributes during the creation of HTML for custom widgets This makes it possible for authenticated attackers, with administrator-level access and above, to execute arbitrary commands on the server.

Hitron CODA-5310 has insufficient filtering for specific parameters in the connection test function. A remote attacker authenticated as an administrator, can use the management page to perform command injection attacks, to execute arbitrary system command, manipulate system or disrupt service.

Realtek GPON router has insufficient filtering for special characters. A remote attacker authenticated as an administrator can exploit this vulnerability to perform command injection attacks, to execute arbitrary system command, manipulate system or disrupt service.

An exploitable command injection vulnerability exists in the cloud connectivity feature of WAGO PFC200. An attacker can inject operating system commands into any of the parameter values contained in the firmware update command. This affects WAGO PFC200 Firmware version 03.02.02(14), version 03.01.07(13), and version 03.00.39(12)

Command Injection vulnerability in McAfee Enterprise Security Manager (ESM) prior to 11.2.0 and prior to 10.4.0 allows authenticated user to execute arbitrary code via specially crafted parameters.

Command Injection vulnerability in McAfee Enterprise Security Manager (ESM) prior to 11.2.0 and prior to 10.4.0 allows authenticated user to execute arbitrary code via specially crafted parameters.

An arbitrary code exection vulnerability exists in Linksys WUMC710 Wireless-AC Universal Media Connector with firmware <= 1.0.02 (build3). The do_setNTP function within the httpd binary uses unvalidated user input in the construction of a system command. An authenticated attacker with administrator privileges can leverage this vulnerability over the network via a malicious GET or POST request to /setNTP.cgi to execute arbitrary commands on the underlying Linux operating system as root.

IBM Security Guardium 11.4 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 240901.

An arbitrary code execution vulnerability exisits in Linksys WRT54GL Wireless-G Broadband Router with firmware <= 4.30.18.006. The Check_TSSI function within the httpd binary uses unvalidated user input in the construction of a system command. An authenticated attacker with administrator privileges can leverage this vulnerability over the network via a malicious POST request to /apply.cgi to execute arbitrary commands on the underlying Linux operating system as root.

Sewio’s Real-Time Location System (RTLS) Studio version 2.0.0 up to and including version 2.6.2 does not properly validate the input module name to the monitor services of the software. This could allow a remote attacker to access sensitive functions of the application and execute arbitrary system commands.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. Successful exploits could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): ClearPass Policy Manager 6.10.x: 6.10.7 and below and ClearPass Policy Manager 6.9.x: 6.9.12 and below.

NVIDIA BMC contains a vulnerability in SPX REST API, where an authorized attacker can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure and data tampering.

Cursor is a code editor built for programming with AI. In versions 1.2.4 and below, attackers can achieve remote and persistent code execution by modifying an already trusted MCP configuration file inside a shared GitHub repository or editing the file locally on the target's machine. Once a collaborator accepts a harmless MCP, the attacker can silently swap it for a malicious command (e.g., calc.exe) without triggering any warning or re-prompt. If an attacker has write permissions on a user's active branches of a source repository that contains existing MCP servers the user has previously approved, or allows an attacker has arbitrary file-write locally, the attacker can achieve arbitrary code execution. This is fixed in version 1.3.

TOTOLINK-720R v4.1.5cu.374 was discovered to contain a remote code execution (RCE) vulnerability via the setdiagnosicfg function.

Vulnerabilities in the Aruba EdgeConnect Enterprise command line interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba EdgeConnect Enterprise Software version(s): ECOS 9.2.1.0 and below; ECOS 9.1.3.0 and below; ECOS 9.0.7.0 and below; ECOS 8.3.7.1 and below.

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities results in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

RAVA certificate validation system has insufficient filtering for special parameter of the web page input field. A remote attacker with administrator privilege can exploit this vulnerability to perform arbitrary system command and disrupt service.

A post-authentication command injection vulnerability in the CLI command of Zyxel ZyWALL/USG series firmware versions 4.20 through 4.72, VPN series firmware versions 4.30 through 5.32, USG FLEX series firmware versions 4.50 through 5.32, and ATP series firmware versions 4.32 through 5.32, which could allow an authenticated attacker with administrator privileges to execute OS commands.

SolarWinds Platform was susceptible to Command Injection. This vulnerability allows a remote adversary with complete control over the SolarWinds database to execute arbitrary commands.

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities results in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities results in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): 6.10.x: 6.10.6 and below; 6.9.x: 6.9.11 and below. Aruba has released upgrades for Aruba ClearPass Policy Manager that address these security vulnerabilities.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): 6.10.x: 6.10.6 and below; 6.9.x: 6.9.11 and below. Aruba has released upgrades for Aruba ClearPass Policy Manager that address these security vulnerabilities.

An improper neutralization of special elements used in an OS command vulnerability [CWE-78] in the management interface of FortiTester 2.3.0 through 3.9.1, 4.0.0 through 4.2.0, 7.0.0 through 7.1.0 may allow an authenticated attacker to execute unauthorized commands via specifically crafted arguments to commands of the certificate import feature.

OS command injection vulnerability in Nintendo Wi-Fi Network Adaptor WAP-001 All versions allows an attacker with an administrative privilege to execute arbitrary OS commands via unspecified vectors.

Zoho ManageEngine Asset Explorer 6.5 does not validate the System Center Configuration Manager (SCCM) database username when dynamically generating a command to schedule scans for SCCM. This allows an attacker to execute arbitrary commands on the AssetExplorer Server with NT AUTHORITY/SYSTEM privileges.

An issue was discovered in Xorux Lpar2RRD 6.11 and Stor2RRD 2.61, as distributed in Xorux 2.41. They do not correctly verify the integrity of an upgrade package before processing it. As a result, official upgrade packages can be modified to inject an arbitrary Bash script that will be executed by the underlying system. It is possible to achieve this by modifying the values in the files.SUM file (which are used for integrity control) and injecting malicious code into the upgrade.sh file.

OS Command Injection vulnerability in Hitachi RAID Manager Storage Replication Adapter allows remote authenticated users to execute arbitrary OS commands. This issue affects: Hitachi RAID Manager Storage Replication Adapter 02.01.04 versions prior to 02.03.02 on Windows; 02.05.00 versions prior to 02.05.01 on Windows and Docker.

The Strapi framework before 3.0.0-beta.17.8 is vulnerable to Remote Code Execution in the Install and Uninstall Plugin components of the Admin panel, because it does not sanitize the plugin name, and attackers can inject arbitrary shell commands to be executed by the execa function.

An OS command injection vulnerability exists in the web interface configuration upload functionality of MC Technologies MC LR Router 2.10.5. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

PowerPath Management Appliance with versions 3.3 & 3.2*, 3.1 & 3.0* contains OS Command Injection vulnerability. An authenticated remote attacker with administrative privileges could potentially exploit the issue and execute commands on the system as the root user.

Incorrect input sanitation in text-oriented user interfaces (telnet, ssh) in Swisscom Centro Grande before 6.16.12 allows remote authenticated users to execute arbitrary commands via command injection.

An OS command injection vulnerability exists in the web_server /action/import_authorized_keys/ functionality of Robustel R1510 3.1.16 and 3.3.0. A specially-crafted network request can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger this vulnerability.

A vulnerability was reported in Lenovo Smart Camera X3, X5, and C2E that could allow command injection by setting a specially crafted network configuration. This vulnerability is the same as CNVD-2020-68652.

IBM Security Directory Suite VA 8.0.1 through 8.0.1.19 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 228439.

Multiple vulnerabilities in Cisco Routed PON Controller Software, which runs as a docker container on hardware that is supported by Cisco IOS XR Software, could allow an authenticated, remote attacker with Administrator-level privileges on the PON Manager or direct access to the PON Manager MongoDB instance to perform command injection attacks on the PON Controller container and execute arbitrary commands as root. These vulnerabilities are due to insufficient validation of arguments that are passed to specific configuration commands. An attacker could exploit these vulnerabilities by including crafted input as the argument of an affected configuration command. A successful exploit could allow the attacker to execute arbitrary commands as root on the PON controller.

A vulnerability in the web-based management interface of Cisco ATA 190 Multiplatform Series Analog Telephone Adapter firmware could allow an authenticated, remote attacker with high privileges to execute arbitrary commands as the root user on the underlying operating system. This vulnerability is due to a lack of input sanitization in the web-based management interface. An attacker could exploit this vulnerability by sending a malicious request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as the root user.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary commands and obtain root privileges. The vulnerability is due to insufficient validation of user-supplied input in the Certificate Signing Request (CSR) function of the web-based management interface. An attacker could exploit this vulnerability by submitting a crafted CSR in the web-based management interface. A successful exploit could allow an attacker with administrator privileges to execute arbitrary commands on the device with full root privileges.