igmpproxy 0.4 before commit 2b30c36 allows remote attackers to cause a denial of service (application crash) via a crafted IGMPv3 membership report packet with a malicious source address. Due to insufficient validation in the `recv_igmp()` function in src/igmpproxy.c, an invalid group record type can trigger a NULL pointer dereference when logging the address using `inet_fmtsrc()`. This vulnerability can be exploited by sending malformed multicast traffic to a host running igmpproxy, leading to a crash. igmpproxy is used in various embedded networking environments and consumer-grade IoT devices (such as home routers and media gateways) to handle multicast traffic for IPTV and other streaming services. Affected devices that rely on unpatched versions of igmpproxy may be vulnerable to remote denial-of-service attacks across a LAN .
A vulnerability was found in Tenda A15 15.13.07.09/15.13.07.13. It has been classified as critical. This affects an unknown part of the file /goform/multimodalAdd of the component HTTP POST Request Handler. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in Tenda AC10 16.03.10.13 and classified as critical. Affected by this issue is some unknown functionality of the file /goform/UserCongratulationsExec. The manipulation of the argument getuid leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
Vulnerability exists in SCI IEC 60870-5-104 and HCI IEC 60870-5-104 that affects the RTU500 series product versions listed below. Specially crafted messages sent to the mentioned components are not validated properly and can result in buffer overflow and as final consequence to a reboot of an RTU500 CMU.
D-Link DIR820LA1_FW106B02 was discovered to contain a buffer overflow via the nextPage parameter at ping.ccp.
D-Link Wireless AC1200 Dual Band VDSL ADSL Modem Router DSL-3782 Firmware v1.01 allows unauthenticated attackers to cause a Denial of Service (DoS) via the User parameter or Pwd parameter to Login.asp.
Rhonabwy before v1.1.5 was discovered to contain a buffer overflow via the component r_jwe_aesgcm_key_unwrap. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted JWE token.
Tenda RX3 US_RX3V1.0br_V16.03.13.11_multi_TDE01 is vulnerable to Buffer Overflow via the time and timeZone parameters at /goform/SetSysTimeCfg. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.
Vapor is a server-side Swift HTTP web framework. When using automatic content decoding an attacker can craft a request body that can make the server crash with the following request: `curl -d "array[_0][0][array][_0][0][array]$(for f in $(seq 1100); do echo -n '[_0][0][array]'; done)[string][_0]=hello%20world" http://localhost:8080/foo`. The issue is unbounded, attacker controlled stack growth which will at some point lead to a stack overflow and a process crash. This issue has been fixed in version 4.61.1.
An unauthenticated attacker can send a specially crafted unauthenticated HTTP request to the device that can overflow a buffer. This vulnerability impacts products based on HID Mercury Intelligent Controllers LP1501, LP1502, LP2500, LP4502, and EP4502 which contain firmware versions prior to 1.29. The overflowed data leads to segmentation fault and ultimately a denial-of-service condition, causing the device to reboot. The impact of this vulnerability is that an unauthenticated attacker could leverage this flaw to cause the target device to become unresponsive. An attacker could automate this attack to achieve persistent DoS, effectively rendering the target controller useless.
D-Link DIR-1960 firmware DIR-1960_A1_1.11 was discovered to contain a buffer overflow via srtcat in prog.cgi. This vulnerability allowed attackers to cause a Denial of Service (DoS) via a crafted HTTP request.
An exploitable denial of service vulnerability exists in the ENIP Request Path Data Segment functionality of Allen-Bradley Flex IO 1794-AENT/B. A specially crafted network request can cause a loss of communications with the device resulting in denial-of-service. An attacker can send a malicious packet to trigger this vulnerability If the ANSI Extended Symbol Segment Sub-Type is supplied, the device treats the byte following as the Data Size in words. When this value represents a size greater than what remains in the packet data, the device enters a fault state where communication with the device is lost and a physical power cycle is required.
A buffer overflow vulnerability in SonicOS allows a remote unauthenticated attacker to cause Denial of Service (DoS) on the firewall SSLVPN service and leads to firewall crash. This vulnerability affected SonicOS Gen 5 version 5.9.1.7, 5.9.1.13, Gen 6 version 6.5.4.7, 6.5.1.12, 6.0.5.3, SonicOSv 6.5.4.v and Gen 7 version 7.0.0.0.
Tenda TX9 Pro V22.03.02.10 is vulnerable to Buffer Overflow via the functtion setIPv6Status() in httpd module.
NBMonitor 1.6.6.0 contains a denial of service vulnerability in its registration key input that allows attackers to crash the application. Attackers can generate a 1000-character buffer payload and paste it into the 'Key' field to trigger an application crash.
TextCrawler Pro 3.1.1 contains a denial of service vulnerability that allows attackers to crash the application by sending an oversized buffer in the license key field. Attackers can generate a 6000-byte payload and paste it into the activation field to trigger an application crash.
Buffer Overflow in the "sixel_encoder_encode_bytes" function of Libsixel v1.8.6 allows attackers to cause a Denial of Service (DoS).
GOST engine is a reference implementation of the Russian GOST crypto algorithms for OpenSSL. TLS clients using GOST engine when ciphersuite `TLS_GOSTR341112_256_WITH_KUZNYECHIK_CTR_OMAC` is agreed and the server uses 512 bit GOST secret keys are vulnerable to buffer overflow. GOST engine version 3.0.1 contains a patch for this issue. Disabling ciphersuite `TLS_GOSTR341112_256_WITH_KUZNYECHIK_CTR_OMAC` is a possible workaround.
WS-WN572HP3 V230525 was discovered to contain a buffer overflow in the component /www/cgi-bin/upload.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.
MiniWeb HTTP server 0.8.19 allows remote attackers to cause a denial of service (daemon crash) via a long name for the first parameter in a POST request.
engine.c in slaacd in OpenBSD 6.9 and 7.0 before 2022-02-21 has a buffer overflow triggerable by an IPv6 router advertisement with more than seven nameservers. NOTE: privilege separation and pledge can prevent exploitation.
A vulnerability has been identified in SCALANCE X200-4P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT PRO (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2P IRT (All versions < V5.5.2), SCALANCE X202-2P IRT PRO (All versions < V5.5.2), SCALANCE X204-2 (All versions < V5.2.6), SCALANCE X204-2FM (All versions < V5.2.6), SCALANCE X204-2LD (All versions < V5.2.6), SCALANCE X204-2LD TS (All versions < V5.2.6), SCALANCE X204-2TS (All versions < V5.2.6), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT PRO (All versions < V5.5.2), SCALANCE X206-1 (All versions < V5.2.6), SCALANCE X206-1LD (All versions < V5.2.6), SCALANCE X208 (All versions < V5.2.6), SCALANCE X208PRO (All versions < V5.2.6), SCALANCE X212-2 (All versions < V5.2.6), SCALANCE X212-2LD (All versions < V5.2.6), SCALANCE X216 (All versions < V5.2.6), SCALANCE X224 (All versions < V5.2.6), SCALANCE XF201-3P IRT (All versions < V5.5.2), SCALANCE XF202-2P IRT (All versions < V5.5.2), SCALANCE XF204 (All versions < V5.2.6), SCALANCE XF204-2 (All versions < V5.2.6), SCALANCE XF204-2BA IRT (All versions < V5.5.2), SCALANCE XF204IRT (All versions < V5.5.2), SCALANCE XF206-1 (All versions < V5.2.6), SCALANCE XF208 (All versions < V5.2.6). Affected devices do not properly validate the URI of incoming HTTP GET requests. This could allow an unauthenticated remote attacker to crash affected devices.
MariaDB Server v10.7 and below was discovered to contain a global buffer overflow in the component decimal_bin_size, which is exploited via specially crafted SQL statements.
A vulnerability has been identified in SCALANCE X302-7 EEC (230V), SCALANCE X302-7 EEC (230V, coated), SCALANCE X302-7 EEC (24V), SCALANCE X302-7 EEC (24V, coated), SCALANCE X302-7 EEC (2x 230V), SCALANCE X302-7 EEC (2x 230V, coated), SCALANCE X302-7 EEC (2x 24V), SCALANCE X302-7 EEC (2x 24V, coated), SCALANCE X304-2FE, SCALANCE X306-1LD FE, SCALANCE X307-2 EEC (230V), SCALANCE X307-2 EEC (230V, coated), SCALANCE X307-2 EEC (24V), SCALANCE X307-2 EEC (24V, coated), SCALANCE X307-2 EEC (2x 230V), SCALANCE X307-2 EEC (2x 230V, coated), SCALANCE X307-2 EEC (2x 24V), SCALANCE X307-2 EEC (2x 24V, coated), SCALANCE X307-3, SCALANCE X307-3, SCALANCE X307-3LD, SCALANCE X307-3LD, SCALANCE X308-2, SCALANCE X308-2, SCALANCE X308-2LD, SCALANCE X308-2LD, SCALANCE X308-2LH, SCALANCE X308-2LH, SCALANCE X308-2LH+, SCALANCE X308-2LH+, SCALANCE X308-2M, SCALANCE X308-2M, SCALANCE X308-2M PoE, SCALANCE X308-2M PoE, SCALANCE X308-2M TS, SCALANCE X308-2M TS, SCALANCE X310, SCALANCE X310, SCALANCE X310FE, SCALANCE X310FE, SCALANCE X320-1 FE, SCALANCE X320-1-2LD FE, SCALANCE X408-2, SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M TS (24V), SCALANCE XR324-12M TS (24V), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M PoE (230V, ports on front), SCALANCE XR324-4M PoE (230V, ports on rear), SCALANCE XR324-4M PoE (24V, ports on front), SCALANCE XR324-4M PoE (24V, ports on rear), SCALANCE XR324-4M PoE TS (24V, ports on front), SIPLUS NET SCALANCE X308-2. Affected devices do not properly validate the URI of incoming HTTP GET requests. This could allow an unauthenticated remote attacker to crash affected devices.
A buffer overflow in Mikrotik RouterOS 6.47 allows unauthenticated attackers to cause a denial of service (DOS) via crafted FTP requests.
A vulnerability has been identified in SCALANCE X200-4P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT PRO (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2P IRT (All versions < V5.5.2), SCALANCE X202-2P IRT PRO (All versions < V5.5.2), SCALANCE X204-2 (All versions < V5.2.6), SCALANCE X204-2FM (All versions < V5.2.6), SCALANCE X204-2LD (All versions < V5.2.6), SCALANCE X204-2LD TS (All versions < V5.2.6), SCALANCE X204-2TS (All versions < V5.2.6), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT PRO (All versions < V5.5.2), SCALANCE X206-1 (All versions < V5.2.6), SCALANCE X206-1LD (All versions < V5.2.6), SCALANCE X208 (All versions < V5.2.6), SCALANCE X208PRO (All versions < V5.2.6), SCALANCE X212-2 (All versions < V5.2.6), SCALANCE X212-2LD (All versions < V5.2.6), SCALANCE X216 (All versions < V5.2.6), SCALANCE X224 (All versions < V5.2.6), SCALANCE XF201-3P IRT (All versions < V5.5.2), SCALANCE XF202-2P IRT (All versions < V5.5.2), SCALANCE XF204 (All versions < V5.2.6), SCALANCE XF204-2 (All versions < V5.2.6), SCALANCE XF204-2BA IRT (All versions < V5.5.2), SCALANCE XF204IRT (All versions < V5.5.2), SCALANCE XF206-1 (All versions < V5.2.6), SCALANCE XF208 (All versions < V5.2.6). Affected devices do not properly validate the GET parameter XNo of incoming HTTP requests. This could allow an unauthenticated remote attacker to crash affected devices.
The eglibc package before 2.14 incorrectly handled the getaddrinfo() function. An attacker could use this issue to cause a denial of service.
nginx njs 0.7.2 is vulnerable to Buffer Overflow. Type confused in Array.prototype.concat() when a slow array appended element is fast array.
When an HTTP profile with the Enforce RFC Compliance option is configured on a virtual server, undisclosed requests can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
When a BIG-IP APM virtual server is configured to use a PingAccess profile, undisclosed requests can cause TMM to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
An unauthenticated remote attacker can cause a buffer overflow which could lead to unexpected behaviour or DoS via Bluetooth or RS-232 interface.
A buffer overflow vulnerability in the Virtual Path Mapping component of FTPShell v6.83 allows attackers to cause a denial of service (DoS).
An issue was discovered in WinAPRS 2.9.0. A buffer overflow in DIGI address processing for VHF KISS packets allows a remote attacker to cause a denial of service (daemon crash) via a malicious AX.25 packet over the air. NOTE: This vulnerability only affects products that are no longer supported by the maintainer
PJSIP is a free and open source multimedia communication library written in C. A buffer overflow vulnerability in versions 2.12 and prior affects applications that use PJSIP DNS resolution. It doesn't affect PJSIP users who utilize an external resolver. This vulnerability is related to CVE-2023-27585. The difference is that this issue is in parsing the query record `parse_rr()`, while the issue in CVE-2023-27585 is in `parse_query()`. A patch is available in the `master` branch of the `pjsip/pjproject` GitHub repository. A workaround is to disable DNS resolution in PJSIP config (by setting `nameserver_count` to zero) or use an external resolver instead.
PJSIP is a free and open source multimedia communication library written in C. Versions 2.12 and prior contain a stack buffer overflow vulnerability that affects PJSUA2 users or users that call the API `pjmedia_sdp_print(), pjmedia_sdp_media_print()`. Applications that do not use PJSUA2 and do not directly call `pjmedia_sdp_print()` or `pjmedia_sdp_media_print()` should not be affected. A patch is available on the `master` branch of the `pjsip/pjproject` GitHub repository. There are currently no known workarounds.
Versions of the package bigint-buffer from 0.0.0 are vulnerable to Buffer Overflow in the toBigIntLE() function. Attackers can exploit this to crash the application.
A Buffer Overflow vulnerability in Tenda AC500 v.2.0.1.9 allows a remote attacker to cause a denial of service via the port parameter at the goform/setVlanInfo component.
A vulnerability has been identified in Opcenter Execution Foundation (All versions < V2407), Opcenter Quality (All versions < V2312), SIMATIC PCS neo (All versions < V4.1), SINEC NMS (All versions < V2.0 SP1), Totally Integrated Automation Portal (TIA Portal) V14 (All versions), Totally Integrated Automation Portal (TIA Portal) V15.1 (All versions), Totally Integrated Automation Portal (TIA Portal) V16 (All versions), Totally Integrated Automation Portal (TIA Portal) V17 (All versions < V17 Update 8), Totally Integrated Automation Portal (TIA Portal) V18 (All versions < V18 Update 3). The affected application contains an out of bounds write past the end of an allocated buffer when handling specific requests on port 4002/tcp and 4004/tcp. This could allow an attacker to crash the application. The corresponding service is auto-restarted after the crash.
D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the AdminPassword parameter in the SetDeviceSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.
Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 22.2.0, Twisted SSH client and server implement is able to accept an infinite amount of data for the peer's SSH version identifier. This ends up with a buffer using all the available memory. The attach is a simple as `nc -rv localhost 22 < /dev/zero`. A patch is available in version 22.2.0. There are currently no known workarounds.
D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the EndTime parameter in the SetParentsControlInfo function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.
D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the Encryption parameter in the SetWLanRadioSecurity function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.
D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the Type parameter in the SetWLanRadioSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.
There is a vulnerability in DHCPv6 packet parsing code that could be explored by remote attacker to craft a packet that could cause buffer overflow in a memcpy call, leading to out-of-bounds memory write that would cause dhcp6relay to crash. Dhcp6relay is a critical process and could cause dhcp relay docker to shutdown. Discovered by Eugene Lim of GovTech Singapore.
Buffer Overflow vulnerability in hzeller timg v.1.5.1 and before allows a remote attacker to cause a denial of service via the 0x61200000045c address.
TP-Link TL-WR940N V2, TP-Link TL-WR941ND V5 and TP-Link TL-WR841N V8 were discovered to contain a buffer overflow via the component /userRpm/AccessCtrlAccessRulesRpm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted GET request.
DoS vulnerability in the PMS module. Successful exploitation of this vulnerability may cause the system to restart.
Buffer overflow in some Zoom clients may allow an unauthenticated user to conduct a denial of service via network access.
DoS vulnerability in the PMS module. Successful exploitation of this vulnerability may cause the system to restart.
Buffer Overflow vulnerability in NBD80S09S-KLC v.YK_HZXM_NBD80S09S-KLC_V4.03.R11.7601.Nat.OnvifC.20230414.bin and NBD80N32RA-KL-V3 v.YK_HZXM_NBD80N32RA-KL_V4.03.R11.7601.Nat.OnvifC.20220120.bin allows a remote attacker to casue a denial of service via a crafted request to the service.XM component.