An OS command injection vulnerability in Zultys MX-SE, MX-SE II, MX-E, MX-Virtual, MX250, and MX30 with firmware versions prior to 17.0.10 patch 17161 and 16.04 patch 16109 allows an administrator to execute arbitrary OS commands via a file name parameter in a patch application function. The Zultys MX Administrator client has a "Patch Manager" section that allows administrators to apply patches to the device. The user supplied filename for the patch file is passed to a shell script without validation. Including bash command substitution characters in a patch file name results in execution of the provided command.

Dell CloudLink, versions prior to 8.2, contain a vulnerability where a privileged user with known password can run command injection to gain control of system.

Multiple vulnerabilities in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to conduct a path traversal or command injection attack on an affected system. These vulnerabilities are due to insufficient input validation. An attacker could exploit these vulnerabilities by using the web-based management interface to do one or both of the following: Execute a command using crafted input Upload a file that has been altered using path traversal techniques A successful exploit could allow the attacker to read and write arbitrary files or execute arbitrary commands as root on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

OpenLiteSpeed and LSWS Enterprise provided by LiteSpeed Technologies contain an OS command injection vulnerability. An arbitrary OS command may be executed by an attacker with the administrative privilege.

A vulnerability was identified in DrayTek Vigor 300B up to 1.5.1.6. This affects the function cgiGetFile of the file /cgi-bin/mainfunction.cgi/uploadlangs of the component Web Management Interface. The manipulation of the argument File leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor confirms that "300B is EoL, and this is an authenticated vulnerability. We don't plan to fix it." This vulnerability only affects products that are no longer supported by the maintainer.

An OS command injection vulnerability has been reported to affect legacy QTS. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 4.3.6.2805 build 20240619 and later QTS 4.3.4.2814 build 20240618 and later QTS 4.3.3.2784 build 20240619 and later QTS 4.2.6 build 20240618 and later

An OS command injection vulnerability exists in the web interface mac2name functionality of Peplink Smart Reader v1.2.0 (in QEMU). A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

An issue in Dolibarr ERP CRM v.17.0.1 and before allows a remote privileged attacker to execute arbitrary code via a crafted command/script.

Adobe Commerce versions 2.4.6-p1 (and earlier), 2.4.5-p3 (and earlier) and 2.4.4-p4 (and earlier) are affected by an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability that could lead to arbitrary code execution by an admin-privilege authenticated attacker. Exploitation of this issue does not require user interaction.

A vulnerability was detected in UTT HiPER 520 1.7.7-160105. Affected is the function sub_44EFB4 of the file /goform/formReleaseConnect of the component Web Management Interface. The manipulation of the argument Isp_Name results in os command injection. The attack can be launched remotely. The exploit is now public and may be used.

Improper Neutralization of commands allowed to be executed via OTRS System Configuration e.g. SchedulerCronTaskModule using UnitTests modules allows any authenticated attacker with admin privileges local execution of Code.This issue affects OTRS: from 7.0.X before 7.0.45, from 8.0.X before 8.0.35; ((OTRS)) Community Edition: from 6.0.1 through 6.0.34.

xiaoheiFS is a self-hosted financial and operational system for cloud service businesses. In versions up to and including 0.3.15, the standard plugin system allows admins to upload a ZIP file containing a binary and a `manifest.json`. The server trusts the `binaries` field in the manifest and executes the specified file without any validation of its contents or behavior, leading to Remote Code Execution (RCE). Version 0.4.0 fixes the issue.

OpenClaw versions prior to 2026.2.22 contain an authorization bypass vulnerability in allow-always wrapper persistence that allows attackers to bypass approval checks by persisting wrapper-level allowlist entries instead of validating inner executable intent. Remote attackers can approve benign wrapped system.run commands and subsequently execute different payloads without approval, enabling remote code execution on gateway and node-host execution flows.

A vulnerability has been identified in SCALANCE LPE9403 (6GK5998-3GS00-2AC2) (All versions < V4.0). Affected devices do not properly sanitize user input when creating new SNMP users. This could allow an authenticated highly-privileged remote attacker to execute arbitrary code on the device.

A vulnerability, which was classified as critical, has been found in D-Link DIR-823X 240126/240802. This issue affects the function sub_41710C of the file /goform/diag_nslookup of the component HTTP POST Request Handler. The manipulation of the argument target_addr leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

FreePBX is an open source IP PBX. From versions 16.0.17.2 to before 16.0.20 and from version 17.0.2.4 to before 17.0.5, a command injection vulnerability exists in FreePBX when using the ElevenLabs Text-to-Speech (TTS) engine in the recordings module. This issue has been patched in versions 16.0.20 and 17.0.5.

In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 a remote attacker with SNMPv2 write privileges may use an a special SNMP request to gain full access to the device.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary code with root privileges on the underlying operating system of an affected device. The vulnerability exists because the affected software improperly sanitizes values that are parsed from a specific configuration file. An attacker could exploit this vulnerability by tampering with a specific configuration file and then sending an API call. A successful exploit could allow the attacker to inject arbitrary code that would be executed on the underlying operating system of the affected device. To exploit this vulnerability, the attacker would need to have a privileged set of credentials to the device.

NETGEAR DGN2200v4 devices before 2017-01-06 are affected by command execution and an FTP insecure root directory.

The websocket configuration endpoint of the Loxone Miniserver Go Gen.2 before 14.1.5.9 allows remote authenticated administrators to inject arbitrary OS commands via the timezone parameter.

A vulnerability has been identified in SCALANCE LPE9403 (6GK5998-3GS00-2AC2) (All versions < V4.0). Affected devices do not properly sanitize user input when creating new users. This could allow an authenticated highly-privileged remote attacker to execute arbitrary code on the device.

WeGIA is a web manager for charitable institutions. Prior to version 3.6.5, a critical Remote Code Execution (RCE) vulnerability exists in the WeGIA application's database restoration functionality. An attacker with administrative access (which can be obtained via the previously reported Authentication Bypass) can execute arbitrary OS commands on the server by uploading a backup file with a specifically crafted filename. Version 3.6.5 fixes the issue.

An OS command injection vulnerability exists in the data.cgi xfer_dns functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A valid, authenticated LXCA user with elevated privileges may be able to execute command injections through crafted calls to a specific web API.

An OS command injection vulnerability exists in the device network settings functionality of reolink RLC-410W v3.0.0.136_20121102. At [6] the dns_data->dns2 variable, that has the value of the dns2 parameter provided through the SetLocalLink API, is not validated properly. This would lead to an OS command injection.

IBM Security Verify Governance 10.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 256036.

Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, remote attacker to perform a command injection attack on an affected device. These vulnerabilities are due to insufficient input sanitization when executing affected commands. A high-privileged attacker could exploit these vulnerabilities on a Cisco DNA Spaces Connector by injecting crafted input during command execution. A successful exploit could allow the attacker to execute arbitrary commands as root within the Connector docker container.

FreePBX is an open source IP PBX. From versions 16.0.17.2 to before 16.0.20 and from version 17.0.2.4 to before 17.0.5, multiple command injection vulnerabilities exist in the recordings module. This issue has been patched in versions 16.0.20 and 17.0.5.

A security vulnerability has been detected in UTT HiPER 520 1.7.7-160105. This impacts the function sub_44D264 of the file /goform/formPdbUpConfig of the component Web Management Interface. The manipulation of the argument policyNames leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used.

An OS Command Injection vulnerability in Parks Fiberlink 210 firmware version V2.1.14_X000 was found via the /boaform/admin/formPing target_addr parameter.

The Dataprobe iBoot PDU running firmware version 1.43.03312023 or earlier is vulnerable to command injection via the `user-name` URL parameter. An authenticated malicious agent can exploit this vulnerability to execute arbitrary command on the underlying Linux operating system.

An issue was discovered in Veritas InfoScale Operations Manager (VIOM) before 7.4.2.800 and 8.x before 8.0.410. The VIOM web application does not validate user-supplied data and appends it to OS commands and internal binaries used by the application. An attacker with root/administrator level privileges can leverage this to read sensitive data stored on the servers, modify data or server configuration, and delete data or application configuration.

Dell PowerProtect Data Domain, versions 8.5 through 8.6 contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS command injection vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution with root privileges.

A vulnerability was identified in Advantech WISE-6610 1.2.1_20251110. Affected is an unknown function of the file /cgi-bin/luci/admin/openvpn_apply of the component Background Management. Such manipulation of the argument delete_file leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.6, LTS2025 release version 8.3.1.0 through 8.3.1.20, LTS2024 release versions 7.13.1.0 through 7.13.1.60 contain an OS command injection vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution with root privileges.

Modoboa is a mail hosting and management platform. Prior to version 2.7.1, `exec_cmd()` in `modoboa/lib/sysutils.py` always runs subprocess calls with `shell=True`. Since domain names flow directly into shell command strings without any sanitization, a Reseller or SuperAdmin can include shell metacharacters in a domain name to run arbitrary OS commands on the server. Version 2.7.1 patches the issue.

NVIDIA Bluefield 2 and Bluefield 3 DPU BMC contains a vulnerability in ipmitool, where a root user may cause code injection by a network call. A successful exploit of this vulnerability may lead to code execution on the OS.

OS command injection vulnerability exists in Wi-Fi AP UNIT allows. If this vulnerability is exploited, a remote authenticated attacker with an administrative privilege to execute an arbitrary OS command. Affected products and versions are as follows: AC-PD-WAPU v1.05_B04 and earlier, AC-PD-WAPUM v1.05_B04 and earlier, AC-PD-WAPU-P v1.05_B04P and earlier, AC-PD-WAPUM-P v1.05_B04P and earlier, AC-WAPU-300 v1.00_B07 and earlier, AC-WAPUM-300 v1.00_B07 and earlier, AC-WAPU-300-P v1.00_B07 and earlier, and AC-WAPUM-300-P v1.00_B07 and earlier

Budibase is a low code platform for creating internal tools, workflows, and admin panels. In 3.23.22 and earlier, the PostgreSQL integration constructs shell commands using user-controlled configuration values (database name, host, password, etc.) without proper sanitization. The password and other connection parameters are directly interpolated into a shell command. This affects packages/server/src/integrations/postgres.ts.

A vulnerability was found in a Moodle TeX filter administrative setting where insufficient sanitization of configuration input could allow command injection. On sites where the TeX filter is enabled and ImageMagick is installed, a maliciously crafted setting value entered by an administrator could result in unintended system command execution. While exploitation requires administrative privileges, successful compromise could affect the entire Moodle server.

An OS command injection vulnerability exists in the admin.cgi MVPN_trial_init functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Tenda G300-F router firmware version 16.01.14.2 and prior contain an OS command injection vulnerability in the WAN diagnostic functionality (formSetWanDiag). The implementation constructs a shell command that invokes curl and incorporates attacker-controlled input into the command line without adequate neutralization. As a result, a remote attacker with access to the affected management interface can inject additional shell syntax and execute arbitrary commands on the device with the privileges of the management process.

An improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet FortiSandbox Cloud 5.0.4 may allow a privileged attacker with super-admin profile and CLI access to execute unauthorized code or commands via crafted HTTP requests.

Cacti is an open source performance and fault management framework. Due to a flaw in multi-line SNMP result parser, authenticated users can inject malformed OIDs in the response. When processed by ss_net_snmp_disk_io() or ss_net_snmp_disk_bytes(), a part of each OID will be used as a key in an array that is used as part of a system command, causing a command execution vulnerability. This vulnerability is fixed in 1.2.29.

The Telus Wi-Fi Hub (PRV65B444A-S-TS) with firmware version 3.00.20 is affected by an authenticated command injection vulnerability in multiple parameters passed to tr69_cmd.cgi. A remote attacker connected to the router's LAN and authenticated with a super user account, or using a bypass authentication vulnerability like CVE-2021-20090 could leverage this issue to run commands or gain a shell as root on the target device.

A vulnerability in the configuration dashboard of Cisco Common Services Platform Collector (CSPC) could allow an authenticated, remote attacker to execute arbitrary code. This vulnerability is due to insufficient sanitization of configuration entries. An attacker could exploit this vulnerability by logging in as a super admin and entering crafted input to configuration options on the CSPC configuration dashboard. A successful exploit could allow the attacker to execute remote code as root.

The Total Upkeep – WordPress Backup Plugin plus Restore & Migrate by BoldGrid plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 1.16.10 via the compression_level setting. This is due to the plugin using the compression_level setting in proc_open() without any validation. This makes it possible for authenticated attackers, with administrator-level access and above, to execute code on the server.

Blinko is an AI-powered card note-taking project. Prior to version 1.8.4, the MCP (Model Context Protocol) server creation function allows specifying arbitrary commands and arguments, which are executed when testing the connection. This issue has been patched in version 1.8.4.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.