TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_415730 function.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_411D00 function.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability via the pin_host parameter in the WPS Settings.

VinChin Backup & Recovery v5.0.*, v6.0.*, v6.7.*, and v7.0.* was discovered to contain a command injection vulnerability.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

Command injection vulnerability in China Mobile An Lianbao WF-1 1.01 via the 'ip' parameter with a POST request to /api/ZRQos/set_online_client.

D-Link DI-8300 v16.07.26A1 is vulnerable to command injection via the upgrade_filter_asp function.

A weakness has been identified in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setMacFilterRules of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. This manipulation of the argument enable causes os command injection. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QTS 4.5.4.2627 build 20231225 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTS hero h4.5.4.2626 build 20231225 and later QuTScloud c5.1.5.2651 and later

COMFAST CF-XR11 V2.7.2 has a command injection vulnerability in function sub_424CB4. Attackers can send POST request messages to /usr/bin/webmgnt and inject commands into parameter iface.

D-Link DI-8100G 17.12.20A1 is vulnerable to Command Injection via sub47A60C function in the upgrade_filter.asp file

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability in the Changing Username and Password function. This vulnerability is exploited via a crafted payload.

D-LINK DWL-6610 FW_v_4.3.0.8B003C was discovered to contain a command injection vulnerability in the function pcap_download_handler. This vulnerability allows attackers to execute arbitrary commands via the update.device.packet-capture.tftp-file-name parameter.

A vulnerability was found in Byzoro Smart S85F Management Platform up to 20230807. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /log/decodmail.php. The manipulation of the argument file leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-237517 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Accellion File Transfer Appliance before FTA_9_11_210 allows remote attackers to execute arbitrary code via shell metacharacters in the oauth_token parameter.

D-LINK DWL-6610 FW_v_4.3.0.8B003C was discovered to contain a command injection vulnerability in the function web_cert_download_handler. This vulnerability allows attackers to execute arbitrary commands via the certDownload parameter.

Ghidra/RuntimeScripts/Linux/support/launch.sh in NSA Ghidra through 10.2.2 passes user-provided input into eval, leading to command injection when calling analyzeHeadless with untrusted input.

An issue in TOTOLINK X6000R V9.4.0cu.652_B20230116 and V9.4.0cu.852_B20230719 allows a remote attacker to execute arbitrary code via the command parameter of the setting/setTracerouteCfg component.

An issue was discovered in Digi TransPort DR64, SR44 VC74, and WR. The ZING protocol allows arbitrary remote command execution with SUPER privileges. This allows an attacker (with knowledge of the protocol) to execute arbitrary code on the controller including overwriting firmware, adding/removing users, disabling the internal firewall, etc.

D-LINK DWL-6610 FW_v_4.3.0.8B003C was discovered to contain a command injection vulnerability in the function sub_2EF50. This vulnerability allows attackers to execute arbitrary commands via the manual-time-string parameter.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

An issue in TOTOLINK X6000R V9.4.0cu.652_B20230116 and V9.4.0cu.852_B20230719 allows a remote attacker to execute arbitrary code via the IP parameter of the setDiagnosisCfg component.

An issue in TOTOLINK X6000R V9.4.0cu.652_B20230116 and V9.4.0cu.852_B20230719 allows a remote attacker to execute arbitrary code via the hostName parameter of the switchOpMode component.

Command injection vulnerabilities in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210803 and later

In Versa Director, the command injection is an attack in which the goal is execution of arbitrary commands on the host operating system via a vulnerable application. Command injection attacks are possible when an application passes unsafe user supplied data (forms, cookies, HTTP headers etc.) to a system shell. In this attack, the attacker-supplied operating system commands are usually executed with the privileges of the vulnerable application. Command injection attacks are possible largely due to insufficient input validation.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

Command injection vulnerability in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210803 and later

systeminformation is a System Information Library for Node.JS. Versions 5.0.0 through 5.21.6 have a SSID Command Injection Vulnerability. The problem was fixed with a parameter check in version 5.21.7. As a workaround, check or sanitize parameter strings that are passed to `wifiConnections()`, `wifiNetworks()` (string only).

LiteLLM 1.18.10 contains a remote code execution vulnerability in its MCP server creation functionality. The application allows users to add MCP servers via a JSON configuration specifying arbitrary command and args values. LiteLLM executes these values on the host without validation, enabling attackers to run arbitrary operating system commands. Successful exploitation may result in remote code execution with the privileges of the LiteLLM process.

A command injection vulnerability in the component /jmreport/show of jeecg boot v3.0.0 to v3.5.3 allows attackers to execute arbitrary code via a crafted HTTP request.

A remote code execution (RCE) vulnerability exists in the parisneo/lollms-webui, specifically within the 'open_file' module, version 9.5. The vulnerability arises due to improper neutralization of special elements used in a command within the 'open_file' function. An attacker can exploit this vulnerability by crafting a malicious file path that, when processed by the 'open_file' function, executes arbitrary system commands or reads sensitive file content. This issue is present in the code where subprocess.Popen is used unsafely to open files based on user-supplied paths without adequate validation, leading to potential command injection.

Beijing Digital China Cloud Technology Co., Ltd. DCME-320 v.7.4.12.60 has a command execution vulnerability, which can be exploited to obtain device administrator privileges via the getVar function in the code/function/system/tool/ping.php file.

An issue was discovered in B&R Industrial Automation APROL before R4.2 V7.08. Some web scripts in the web interface allowed injection and execution of arbitrary unintended commands on the web server, a different vulnerability than CVE-2019-16364.

An issue in the handler function in /goform/telnet of Tenda FH1201 v1.2.0.14 (408) allows attackers to execute arbitrary commands via a crafted HTTP request.

An issue was discovered in B&R Industrial Automation APROL before R4.2 V7.08. The AprolLoader could be used to inject and execute arbitrary unintended commands via an unspecified attack scenario, a different vulnerability than CVE-2019-16364.

Command injection vulnerabilities in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

xml_security.rb in the ruby-saml gem before 1.0.0 for Ruby allows XPath injection and code execution because prepared statements are not used.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_wps_gen_pincode function.

NETSCOUT nGeniusPULSE 3.8 has a Command Injection Vulnerability.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210902 and later

A privilege escalation vulnerability exists in the /bin/login functionality of Peplink Smart Reader v1.2.0 (in QEMU). A specially crafted command line argument can lead to a limited-shell escape and elevated capabilities. An attacker can authenticate with hard-coded credentials and execute unblocked default busybox functionality to trigger this vulnerability.

An issue in Wavlink WL_WNJ575A3 v.R75A3_V1410_220513 allows a remote attacker to execute arbitrary code via username parameter of the set_sys_adm function in adm.cgi.

An issue in COMFAST CF-XR11 v.2.7.2 allows an attacker to execute arbitrary code via the protal_delete_picname parameter in the sub_41171C function at bin/webmgnt.

An arbitrary command injection vulnerability in the Cluster Server component of Veritas InfoScale allows an unauthenticated remote attacker to execute arbitrary commands as root or administrator. These Veritas products are affected: Access 7.4.2 and earlier, Access Appliance 7.4.2 and earlier, Flex Appliance 1.2 and earlier, InfoScale 7.3.1 and earlier, InfoScale between 7.4.0 and 7.4.1, Veritas Cluster Server (VCS) 6.2.1 and earlier on Linux/UNIX, Veritas Cluster Server (VCS) 6.1 and earlier on Windows, Storage Foundation HA (SFHA) 6.2.1 and earlier on Linux/UNIX, and Storage Foundation HA (SFHA) 6.1 and earlier on Windows.

matrix-appservice-irc is a Node.js IRC bridge for Matrix. Prior to version 1.0.1, it is possible to craft a command with newlines which would not be properly parsed. This would mean you could pass a string of commands as a channel name, which would then be run by the IRC bridge bot. Versions 1.0.1 and above are patched. There are no robust workarounds to the bug. One may disable dynamic channels in the config to disable the most common execution method but others may exist.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the cmd parameter in the webcmd function.

An attacker could leverage an API to pass along a malicious file that could then manipulate the process creation command line in MDT AutoSave versions prior to v6.02.06 and run a command line argument. This could then be leveraged to run a malicious process.

Dango-Translator v4.5.5 was discovered to contain a remote command execution (RCE) vulnerability via the component app/config/cloud_config.json.