A vulnerability in the Internet Key Exchange Version 2 (IKEv2) implementation in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to prevent IKEv2 from establishing new security associations. The vulnerability is due to incorrect handling of crafted IKEv2 SA-Init packets. An attacker could exploit this vulnerability by sending crafted IKEv2 SA-Init packets to the affected device. An exploit could allow the attacker to cause the affected device to reach the maximum incoming negotiation limits and prevent further IKEv2 security associations from being formed.

A vulnerability in the Constrained Application Protocol (CoAP) implementation of Cisco IoT Field Network Director could allow an unauthenticated remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation of incoming CoAP traffic. An attacker could exploit this vulnerability by sending a malformed CoAP packet to an affected device. A successful exploit could allow the attacker to force the CoAP server to stop, interrupting communication to the IoT endpoints.

An issue was discovered in HCC Nichestack 3.0. The code that parses TCP packets relies on an unchecked value of the IP payload size (extracted from the IP header) to compute the length of the TCP payload within the TCP checksum computation function. When the IP payload size is set to be smaller than the size of the IP header, the TCP checksum computation function may read out of bounds (a low-impact write-out-of-bounds is also possible).

Palo Alto Networks Traps ESM Console before 3.4.4 allows attackers to cause a denial of service by leveraging improper validation of requests to revoke a Traps agent license.

A vulnerability in the ARJ archive parsing module in Clam AntiVirus (ClamAV) Software versions 0.102.2 could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to a heap buffer overflow read. An attacker could exploit this vulnerability by sending a crafted ARJ file to an affected device. An exploit could allow the attacker to cause the ClamAV scanning process crash, resulting in a denial of service condition.

iSmartAlarm cube devices allow Denial of Service. Sending a SYN flood on port 12345 will freeze the "cube" and it will stop responding.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an unauthenticated, remote attacker to cause the web-based management interface to unexpectedly restart. The vulnerability is due to insufficient input validation on the web-based management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to cause the interface to restart, resulting in a denial of service (DoS) condition.

A vulnerability in the PDF archive parsing module in Clam AntiVirus (ClamAV) Software versions 0.101 - 0.102.2 could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to a stack buffer overflow read. An attacker could exploit this vulnerability by sending a crafted PDF file to an affected device. An exploit could allow the attacker to cause the ClamAV scanning process crash, resulting in a denial of service condition.

A vulnerability in the web UI of Cisco Small Business Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper validation of requests sent to the web interface. An attacker could exploit this vulnerability by sending a malicious request to the web interface of an affected device. A successful exploit could allow the attacker to cause an unexpected reload of the device, resulting in a DoS condition. This vulnerability affects firmware releases prior than 1.3.7.18

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol handler of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to restart, resulting in a DoS condition.

Multiple Phoenix Contact PLCnext control devices in versions prior to 2021.0.5 LTS are prone to a DoS attack through special crafted JSON requests.

A vulnerability in the implementation of Multiprotocol Border Gateway Protocol (MP-BGP) for the Layer 2 VPN (L2VPN) Ethernet VPN (EVPN) address family in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of Border Gateway Protocol (BGP) update messages that contain crafted EVPN attributes. An attacker could exploit this vulnerability by sending BGP update messages with specific, malformed attributes to an affected device. A successful exploit could allow the attacker to cause an affected device to crash, resulting in a DoS condition.

The lack of validation of a key-value field in the Splunk-to-Splunk protocol results in a denial-of-service in Splunk Enterprise instances configured to index Universal Forwarder traffic. The vulnerability impacts Splunk Enterprise versions before 7.3.9, 8.0 versions before 8.0.9, and 8.1 versions before 8.1.3. It does not impact Universal Forwarders. When Splunk forwarding is secured using TLS or a Token, the attack requires compromising the certificate or token, or both. Implementation of either or both reduces the severity to Medium.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

In BIG-IP Versions 16.1.x before 16.1.3.1 and 15.1.x before 15.1.6.1, and all versions of BIG-IQ 8.x, when the Data Plane Development Kit (DPDK)/Elastic Network Adapter (ENA) driver is used with BIG-IP or BIG-IQ on Amazon Web Services (AWS) systems, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate. Successful exploitation relies on conditions outside of the attacker's control. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A vulnerability in the software-based SSL/TLS message handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL/TLS decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: Datagram TLS (DTLS) messages cannot be used to exploit this vulnerability.

In nr modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed.

In nr modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed.

Matrix Synapse before 1.20.0 erroneously permits non-standard NaN, Infinity, and -Infinity JSON values in fields of m.room.member events, allowing remote attackers to execute a denial of service attack against the federation and common Matrix clients. If such a malformed event is accepted into the room's state, the impact is long-lasting and is not fixed by an upgrade to a newer version, requiring the event to be manually redacted instead. Since events are replicated to servers of other room members, the impact is not constrained to the server of the event sender.

Dell BSAFE Micro Edition Suite, versions prior to 4.5.1, contain a Buffer Over-Read Vulnerability.

An Improper Input Validation vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker to cause a Denial of Service (DoS). If a BGP update message is received over an established BGP session, and that message contains a specific, optional transitive attribute, this session will be torn down with an update message error. This issue cannot propagate beyond an affected system as the processing error occurs as soon as the update is received. This issue is exploitable remotely as the respective attribute will propagate through unaffected systems and intermediate AS (if any). Continuous receipt of a BGP update containing this attribute will create a sustained Denial of Service (DoS) condition. Since this issue only affects 22.3R1, Juniper strongly encourages customers to move to 22.3R1-S1. Juniper SIRT felt that the need to promptly warn customers about this issue affecting the 22.3R1 versions of Junos OS and Junos OS Evolved warranted an Out of Cycle JSA. This issue affects: Juniper Networks Junos OS version 22.3R1. Juniper Networks Junos OS Evolved version 22.3R1-EVO. This issue does not affect: Juniper Networks Junos OS versions prior to 22.3R1. Juniper Networks Junos OS Evolved versions prior to 22.3R1-EVO.

In nr modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed.

A flaw exists in the Ingress/Egress checks routine of FactoryTalk Linx Version 6.11 and prior. This vulnerability could allow a remote, unauthenticated attacker to specifically craft a malicious packet resulting in a denial-of-service condition on the device.

Cryptocat before 2.0.22 has Remote Denial of Service via username

Quicly, an IETF QUIC protocol implementation, is susceptible to a denial-of-service attack prior to commit d9d3df6a8530a102b57d840e39b0311ce5c9e14e. A remote attacker can exploit these bugs to trigger an assertion failure that crashes process using Quicly. Commit d9d3df6a8530a102b57d840e39b0311ce5c9e14e fixes the issue.

TS3 Manager is modern web interface for maintaining Teamspeak3 servers. A Denial of Dervice vulnerability has been identified in versions 2.2.1 and earlier. The vulnerability permits an unauthenticated actor to crash the application through the submission of specially crafted Unicode input, requiring no prior authentication or privileges. The flaw manifests when Unicode tag characters are submitted to the Server field on the login page. The application fails to properly handle these characters during the ASCII conversion process, resulting in an unhandled exception that terminates the application within four to five seconds of submission. This issue is fixed in version 2.2.2.

In modem, there is a possible improper input validation. This could lead to remote denial of service with no additional execution privileges needed..

The Zend Engine in PHP before 5.4.16 RC1, and 5.5.0 before RC2, does not properly determine whether a parser error occurred, which allows context-dependent attackers to cause a denial of service (memory consumption and application crash) via a crafted function definition, as demonstrated by an attack within a shared web-hosting environment. NOTE: the vendor's http://php.net/security-note.php page says "for critical security situations you should be using OS-level security by running multiple web servers each as their own user id.

Squid is an open source caching proxy for the Web supporting HTTP, HTTPS, FTP, and more. Due to Input Validation, Premature Release of Resource During Expected Lifetime, and Missing Release of Resource after Effective Lifetime bugs, Squid is vulnerable to Denial of Service attacks by a trusted server against all clients using the proxy. This bug is fixed in the default build configuration of Squid version 6.10.

CVE-2025-59595 is an internally discovered denial of service vulnerability in versions of Secure Access prior to 14.12. An attacker can send a specially crafted packet to a server in a non-default configuration and cause the server to crash.

CVE-2024-45825 IMPACT A denial-of-service vulnerability exists in the affected products. The vulnerability occurs when a malformed CIP packet is sent over the network to the device and results in a major nonrecoverable fault causing a denial-of-service.

Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. Versions 1.2.0 through 1.8.7, 2.0.0-rc1 through 2.14.19, 3.0.0-rc1 through 3.2.0-rc1, 3.1.7 and 3.0.18 are vulnerable to malicious API requests which can crash the API server and cause denial of service to legitimate clients. With the default configuration, no webhook.gogs.secret set, Argo CD’s /api/webhook endpoint will crash the entire argocd-server process when it receives a Gogs push event whose JSON field commits[].repo is not set or is null. This issue is fixed in versions 2.14.20, 3.2.0-rc2, 3.1.8 and 3.0.19.

An issue was discovered on LG mobile devices with Android OS 9.0 and 10 software. The Wi-Fi subsystem has incorrect input validation, leading to a crash. The LG ID is LVE-SMP-200022 (October 2020).

An Improper Validation of Syntactic Correctness of Input vulnerability in the kernel of Juniper Networks Junos OS Evolved on PTX series allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS). When an incoming TCP packet destined to the device is malformed there is a possibility of a kernel panic. Only TCP packets destined to the ports for BGP, LDP and MSDP can trigger this. This issue only affects PTX10004, PTX10008, PTX10016. No other PTX Series devices or other platforms are affected. This issue affects Juniper Networks Junos OS Evolved: 20.4-EVO versions prior to 20.4R3-S4-EVO; 21.3-EVO versions prior to 21.3R3-EVO; 21.4-EVO versions prior to 21.4R3-EVO; 22.1-EVO versions prior to 22.1R2-EVO. This issue does not affect Juniper Networks Junos OS Evolved versions prior to 20.4R1-EVO.

An issue was discovered in RRC in Samsung Mobile Processor, Wearable Processor, and Modem Exynos 980, 990, 850, 1080, 2100, 1280, 2200, 1330, 1380, 1480, 2400, 1580, 2500, 9110, W920, W930, W1000, Modem 5123, Modem 5300, and Modem 5400. Improper memory initialization results in an illegal memory access, causing a system crash via a malformed RRCReconfiguration message.

Improper input validation for some Intel(R) PROSet/Wireless WiFi products may allow an unauthenticated user to potentially enable denial of service via network access.

Data can be copied without validation in the built-in web server in Moxa NPort IAW5000A-I/O series firmware version 2.2 or earlier, which may allow a remote attacker to cause denial-of-service conditions.

A vulnerability has been identified in LOGO! 12/24RCE (6ED1052-1MD08-0BA1) (All versions), LOGO! 12/24RCE (6ED1052-1MD08-0BA2) (All versions), LOGO! 12/24RCEo (6ED1052-2MD08-0BA1) (All versions), LOGO! 12/24RCEo (6ED1052-2MD08-0BA2) (All versions), LOGO! 230RCE (6ED1052-1FB08-0BA1) (All versions), LOGO! 230RCE (6ED1052-1FB08-0BA2) (All versions), LOGO! 230RCEo (6ED1052-2FB08-0BA1) (All versions), LOGO! 230RCEo (6ED1052-2FB08-0BA2) (All versions), LOGO! 24CE (6ED1052-1CC08-0BA1) (All versions), LOGO! 24CE (6ED1052-1CC08-0BA2) (All versions), LOGO! 24CEo (6ED1052-2CC08-0BA1) (All versions), LOGO! 24CEo (6ED1052-2CC08-0BA2) (All versions), LOGO! 24RCE (6ED1052-1HB08-0BA1) (All versions), LOGO! 24RCE (6ED1052-1HB08-0BA2) (All versions), LOGO! 24RCEo (6ED1052-2HB08-0BA1) (All versions), LOGO! 24RCEo (6ED1052-2HB08-0BA2) (All versions), SIPLUS LOGO! 12/24RCE (6AG1052-1MD08-7BA1) (All versions), SIPLUS LOGO! 12/24RCE (6AG1052-1MD08-7BA2) (All versions), SIPLUS LOGO! 12/24RCEo (6AG1052-2MD08-7BA1) (All versions), SIPLUS LOGO! 12/24RCEo (6AG1052-2MD08-7BA2) (All versions), SIPLUS LOGO! 230RCE (6AG1052-1FB08-7BA1) (All versions), SIPLUS LOGO! 230RCE (6AG1052-1FB08-7BA2) (All versions), SIPLUS LOGO! 230RCEo (6AG1052-2FB08-7BA1) (All versions), SIPLUS LOGO! 230RCEo (6AG1052-2FB08-7BA2) (All versions), SIPLUS LOGO! 24CE (6AG1052-1CC08-7BA1) (All versions), SIPLUS LOGO! 24CE (6AG1052-1CC08-7BA2) (All versions), SIPLUS LOGO! 24CEo (6AG1052-2CC08-7BA1) (All versions), SIPLUS LOGO! 24CEo (6AG1052-2CC08-7BA2) (All versions), SIPLUS LOGO! 24RCE (6AG1052-1HB08-7BA1) (All versions), SIPLUS LOGO! 24RCE (6AG1052-1HB08-7BA2) (All versions), SIPLUS LOGO! 24RCEo (6AG1052-2HB08-7BA1) (All versions), SIPLUS LOGO! 24RCEo (6AG1052-2HB08-7BA2) (All versions). Affected devices do not conduct certain validations when interacting with them. This could allow an unauthenticated remote attacker to manipulate the devices IP address, which means the device would not be reachable and could only be recovered by power cycling the device.

An issue was discovered in Samsung Mobile Processor, Wearable Processor, and Modem (Exynos 980, 850, 990, 1080, 2100, 1280, 2200, 1330, 1380, 1480, 2400, 1580, 2500, 1680, 9110, W920, W930, W1000, Modem 5123, Modem 5300, Modem 5400, and Modem 5410). The absence of proper input validation leads to a Denial of Service.

jsPDF is a library to generate PDFs in JavaScript. Prior to 3.0.2, user control of the first argument of the addImage method results in CPU utilization and denial of service. If given the possibility to pass unsanitized image data or URLs to the addImage method, a user can provide a harmful PNG file that results in high CPU utilization and denial of service. The vulnerability was fixed in jsPDF 3.0.2.

Receipt of a malformed BGP OPEN message may cause the routing protocol daemon (rpd) process to crash and restart. By continuously sending specially crafted BGP OPEN messages, an attacker can repeatedly crash the rpd process causing prolonged denial of service. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS 12.3 prior to 12.3R12-S4, 12.3R13, 12.3R3-S4; 12.3X48 prior to 12.3X48-D50; 13.3 prior to 13.3R4-S11, 13.3R10; 14.1 prior to 14.1R8-S3, 14.1R9; 14.1X53 prior to 14.1X53-D40; 14.1X55 prior to 14.1X55-D35; 14.2 prior to 14.2R4-S7, 14.2R6-S4, 14.2R7; 15.1 prior to 15.1F2-S11, 15.1F4-S1-J1, 15.1F5-S3, 15.1F6, 15.1R4; 15.1X49 prior to 15.1X49-D100; 15.1X53 prior to 15.1X53-D33, 15.1X53-D50.

An issue was discovered on Samsung mobile devices with KK(4.4), L(5.0/5.1), and M(6.0) software. The InputMethod application can cause a system crash via a malformed serializable object in an Intent. The Samsung ID is SVE-2016-7123 (February 2017).

An issue was discovered on Samsung mobile devices with N(7.0) software. The time service (aka Timaservice) allows a kernel panic. The Samsung ID is SVE-2017-8593 (May 2017).

An issue was discovered on Samsung mobile devices with M(6.0) software. SLocation can cause a system crash via a call to an API that is not implemented. The Samsung ID is SVE-2017-8285 (April 2017).

The validate JSON endpoint of the Secvisogram csaf-validator-service in versions < 0.1.0 processes tests with unexpected names. This insufficient input validation of requests by an unauthenticated remote user might lead to a partial DoS of the service. Only the request of the attacker is affected by this vulnerability.

Nanopb is a small code-size Protocol Buffers implementation. In Nanopb before versions 0.4.4 and 0.3.9.7, decoding specifically formed message can leak memory if dynamic allocation is enabled and an oneof field contains a static submessage that contains a dynamic field, and the message being decoded contains the submessage multiple times. This is rare in normal messages, but it is a concern when untrusted data is parsed. This is fixed in versions 0.3.9.7 and 0.4.4. The following workarounds are available: 1) Set the option `no_unions` for the oneof field. This will generate fields as separate instead of C union, and avoids triggering the problematic code. 2) Set the type of the submessage field inside oneof to `FT_POINTER`. This way the whole submessage will be dynamically allocated and the problematic code is not executed. 3) Use an arena allocator for nanopb, to make sure all memory can be released afterwards.

A S+ Operations and S+ Historian service is subject to a DoS by special crafted messages. An attacker might use this flaw to make it crash or even execute arbitrary code on the machine where the service is hosted.

### Summary The `arrayLimit` option in qs does not enforce limits for comma-separated values when `comma: true` is enabled, allowing attackers to cause denial-of-service via memory exhaustion. This is a bypass of the array limit enforcement, similar to the bracket notation bypass addressed in GHSA-6rw7-vpxm-498p (CVE-2025-15284). ### Details When the `comma` option is set to `true` (not the default, but configurable in applications), qs allows parsing comma-separated strings as arrays (e.g., `?param=a,b,c` becomes `['a', 'b', 'c']`). However, the limit check for `arrayLimit` (default: 20) and the optional throwOnLimitExceeded occur after the comma-handling logic in `parseArrayValue`, enabling a bypass. This permits creation of arbitrarily large arrays from a single parameter, leading to excessive memory allocation. **Vulnerable code** (lib/parse.js: lines ~40-50): ```js if (val && typeof val === 'string' && options.comma && val.indexOf(',') > -1) {     return val.split(','); } if (options.throwOnLimitExceeded && currentArrayLength >= options.arrayLimit) {     throw new RangeError('Array limit exceeded. Only ' + options.arrayLimit + ' element' + (options.arrayLimit === 1 ? '' : 's') + ' allowed in an array.'); } return val; ``` The `split(',')` returns the array immediately, skipping the subsequent limit check. Downstream merging via `utils.combine` does not prevent allocation, even if it marks overflows for sparse arrays.This discrepancy allows attackers to send a single parameter with millions of commas (e.g., `?param=,,,,,,,,...`), allocating massive arrays in memory without triggering limits. It bypasses the intent of `arrayLimit`, which is enforced correctly for indexed (`a[0]=`) and bracket (`a[]=`) notations (the latter fixed in v6.14.1 per GHSA-6rw7-vpxm-498p). ### PoC **Test 1 - Basic bypass:** ``` npm install qs ``` ```js const qs = require('qs'); const payload = 'a=' + ','.repeat(25); // 26 elements after split (bypasses arrayLimit: 5) const options = { comma: true, arrayLimit: 5, throwOnLimitExceeded: true }; try {   const result = qs.parse(payload, options);   console.log(result.a.length); // Outputs: 26 (bypass successful) } catch (e) {   console.log('Limit enforced:', e.message); // Not thrown } ``` **Configuration:** - `comma: true` - `arrayLimit: 5` - `throwOnLimitExceeded: true` Expected: Throws "Array limit exceeded" error. Actual: Parses successfully, creating an array of length 26. ### Impact Denial of Service (DoS) via memory exhaustion.

Pexip Infinity 22.x through 24.x before 24.2 has Improper Input Validation for call setup. An unauthenticated remote attacker can trigger a software abort (temporary loss of service).

An issue was discovered on LG mobile devices with Android OS 7.2, 8.0, 8.1, 9, and 10 software. A service crash may occur because of incorrect input validation. The LG ID is LVE-SMP-200013 (July 2020).