Exploitable denial of service vulnerabilities exists in the Service Agent functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted packet can cause a denial of service. An attacker can send a large packet to 4000/tcp to trigger this vulnerability.

A vulnerability in the software-based SSL/TLS message handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL/TLS decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: Datagram TLS (DTLS) messages cannot be used to exploit this vulnerability.

In Eclipse Mosquitto versions 2.07 and earlier, the server will crash if the client tries to send a PUBLISH packet with topic length = 0.

Incorrect data input validation vulnerability, which could allow an attacker with access to the network to implement fuzzing techniques that would allow him to gain knowledge about specially crafted packets that would create a DoS condition through the MMS protocol when initiating communication, achieving a complete system reboot of the device and its services.

Pexip Infinity before 26 allows remote denial of service because of missing H.264 input validation (issue 2 of 2).

A vulnerability has been found in Dahua products. Attackers can send carefully crafted data packets to the interface with vulnerabilities, causing the device to crash.

In archive/zip in Go before 1.15.13 and 1.16.x before 1.16.5, a crafted file count (in an archive's header) can cause a NewReader or OpenReader panic.

Pexip Infinity before 26 allows remote denial of service because of missing RTMP input validation.

Pexip Infinity 23.x before 23.3 has improper input validation, leading to a temporary software abort via RTP.

Data can be copied without validation in the built-in web server in Moxa NPort IAW5000A-I/O series firmware version 2.2 or earlier, which may allow a remote attacker to cause denial-of-service conditions.

Improper Input Validation vulnerability in HTTP/2 of Apache Traffic Server allows an attacker to DOS the server. This issue affects Apache Traffic Server 7.0.0 to 7.1.12, 8.0.0 to 8.1.1, 9.0.0 to 9.0.1.

Improper Input Validation vulnerability in HTTP/2 of Apache Traffic Server allows an attacker to DOS the server. This issue affects Apache Traffic Server 7.0.0 to 7.1.12, 8.0.0 to 8.1.1, 9.0.0 to 9.0.1.

An Improper Input Validation vulnerability in Packet Forwarding Engine manager (FXPC) process of Juniper Networks Junos OS allows an attacker to cause a Denial of Service (DoS) by sending specific DHCPv6 packets to the device and crashing the FXPC service. Continued receipt and processing of this specific packet will create a sustained Denial of Service (DoS) condition. This issue affects only the following platforms in ACX Series: ACX500, ACX1000, ACX1100, ACX2100, ACX2200, ACX4000, ACX5048, ACX5096 devices. Other ACX platforms are not affected from this issue. This issue affects Juniper Networks Junos OS on ACX500, ACX1000, ACX1100, ACX2100, ACX2200, ACX4000, ACX5048, ACX5096: 18.4 version 18.4R3-S7 and later versions prior to 18.4R3-S8. This issue does not affect: Juniper Networks Junos OS 18.4 versions prior to 18.4R3-S7 on ACX500, ACX1000, ACX1100, ACX2100, ACX2200, ACX4000, ACX5048, ACX5096.

An issue was discovered in tcp_rcv() in nptcp.c in HCC embedded InterNiche 4.0.1. The TCP header processing code doesn't sanitize the value of the IP total length field (header length + data length). With a crafted IP packet, an integer overflow occurs whenever the value of the IP data length is calculated by subtracting the length of the header from the total length of the IP packet.

Pexip Infinity 25.x before 25.4 has Improper Input Validation, and thus an unauthenticated remote attacker can cause a denial of service via the administrative web interface.

Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCuz95334.

A Denial of Service vulnerability has been identified in FlexNet Publisher's lmadmin.exe version 11.16.6. A certain message protocol can be exploited to cause lmadmin to crash.

Pexip Infinity 22.x through 24.x before 24.2 has Improper Input Validation for call setup. An unauthenticated remote attacker can trigger a software abort (temporary loss of service).

Sydent is a reference Matrix identity server. Sydent does not limit the size of requests it receives from HTTP clients. A malicious user could send an HTTP request with a very large body, leading to memory exhaustion and denial of service. Sydent also does not limit response size for requests it makes to remote Matrix homeservers. A malicious homeserver could return a very large response, again leading to memory exhaustion and denial of service. This affects any server which accepts registration requests from untrusted clients. This issue has been patched by releases 89071a1, 0523511, f56eee3. As a workaround request sizes can be limited in an HTTP reverse-proxy. There are no known workarounds for the problem with overlarge responses.

Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc43709.

cumulative-distribution-function is an open source npm library used which calculates statistical cumulative distribution function from data array of x values. In versions prior to 2.0.0 apps using this library on improper data may crash or go into an infinite-loop. In the case of a nodejs server-app using this library to act on invalid non-numeric data, the nodejs server may crash. This may affect other users of this server and/or require the server to be rebooted for proper operation. In the case of a browser app using this library to act on invalid non-numeric data, that browser may crash or lock up. A flaw enabling an infinite-loop was discovered in the code for evaluating the cumulative-distribution-function of input data. Although the documentation explains that numeric data is required, some users may confuse an array of strings like ["1","2","3","4","5"] for numeric data [1,2,3,4,5] when it is in fact string data. An infinite loop is possible when the cumulative-distribution-function is evaluated for a given point when the input data is string data rather than type `number`. This vulnerability enables an infinite-cpu-loop denial-of-service-attack on any app using npm:cumulative-distribution-function v1.0.3 or earlier if the attacker can supply malformed data to the library. The vulnerability could also manifest if a data source to be analyzed changes data type from Arrays of number (proper) to Arrays of string (invalid, but undetected by earlier version of the library). Users should upgrade to at least v2.0.0, or the latest version. Tests for several types of invalid data have been created, and version 2.0.0 has been tested to reject this invalid data by throwing a `TypeError()` instead of processing it. Developers using this library may wish to adjust their app's code slightly to better tolerate or handle this TypeError. Apps performing proper numeric data validation before sending data to this library should be mostly unaffected by this patch. The vulnerability can be mitigated in older versions by ensuring that only finite numeric data of type `Array[number]` or `number` is passed to `cumulative-distribution-function` and its `f(x)` function, respectively.

Possible buffer overflow due to Improper validation of received CF-ACK and CF-Poll data frames in Snapdragon Auto, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music

An issue was discovered on LG mobile devices with Android OS 7.2, 8.0, 8.1, 9, and 10 software. An application crash can occur because of incorrect application-level input validation. The LG ID is LVE-SMP-200018 (July 2020).

A vulnerability in the implementation of the PROFINET Discovery and Configuration Protocol (PN-DCP) for Cisco IOS 12.2 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper parsing of ingress PN-DCP Identify Request packets destined to an affected device. An attacker could exploit this vulnerability by sending a crafted PN-DCP Identify Request packet to an affected device and then continuing to send normal PN-DCP Identify Request packets to the device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are configured to process PROFINET messages. Beginning with Cisco IOS Software Release 12.2(52)SE, PROFINET is enabled by default on all the base switch module and expansion-unit Ethernet ports. Cisco Bug IDs: CSCuz47179.

Valid Host header field can cause Apache Traffic Server to crash on some platforms. This issue affects Apache Traffic Server: from 9.2.0 through 9.2.5. Users are recommended to upgrade to version 9.2.6, which fixes the issue, or 10.0.2, which does not have the issue.

In FreeBSD 13.0-STABLE before n245765-bec0d2c9c841, 12.2-STABLE before r369859, 11.4-STABLE before r369866, 13.0-RELEASE before p1, 12.2-RELEASE before p7, and 11.4-RELEASE before p10, missing message validation in libradius(3) could allow malicious clients or servers to trigger denial of service in vulnerable servers or clients respectively.

The affected product does not properly validate input, which may allow an attacker to execute a denial-of-service attack on the NIO 50 (all versions).

Dovecot before 2.3.13 has Improper Input Validation in lda, lmtp, and imap, leading to an application crash via a crafted email message with certain choices for ten thousand MIME parts.

The length of the input fields of Host Engineering H0-ECOM100, H2-ECOM100, and H4-ECOM100 modules are verified only on the client side when receiving input from the configuration web server, which may allow an attacker to bypass the check and send input to crash the device.

H2O version 2.2.2 and earlier allows remote attackers to cause a denial of service in the server via specially crafted HTTP/1 header.

Pillow before 8.1.2 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for a BLP container, and thus an attempted memory allocation can be very large.

An issue was discovered on LG mobile devices with Android OS 7.2, 8.0, 8.1, 9, and 10 software. A service crash may occur because of incorrect input validation. The LG ID is LVE-SMP-200013 (July 2020).

Pillow before 8.1.2 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICNS container, and thus an attempted memory allocation can be very large.

On BIG-IP version 16.0.x before 16.0.1.2, 15.1.x before 15.1.3.1, 14.1.x before 14.1.4.3, 13.1.x before 13.1.4.1, and all versions of 12.1.x and 11.6.x, when GPRS Tunneling Protocol (GTP) iRules commands or a GTP profile is configured on a virtual server, undisclosed GTP messages can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

libspdm is a sample implementation that follows the DMTF SPDM specifications. Prior to versions 2.3.3 and 3.0, following a successful CAPABILITIES response, a libspdm Requester stores the Responder's CTExponent into its context without validation. If the Requester sends a request message that requires a cryptography operation by the Responder, such as CHALLENGE, libspdm will calculate the timeout value using the Responder's unvalidated CTExponent. A patch is available in version 2.3.3. A workaround is also available. After completion of VCA, the Requester can check the value of the Responder's CTExponent. If it greater than or equal to 64, then the Requester can stop communication with the Responder.

An issue was discovered in the _send_secure_msg() function of yubihsm-shell through 2.0.2. The function does not validate the embedded length field of a message received from the device. This could lead to an oversized memcpy() call that will crash the running process. This could be used by an attacker to cause a denial of service.

The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle an external loop between a pair of dot1x enabled ports, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many unicast EAPoL Protocol Data Units (PDUs), aka Bug ID CSCtq36336.

The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle (1) a loop between a dot1x enabled port and an open-authentication dot1x enabled port and (2) a loop between a dot1x enabled port and a non-dot1x port, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many Spanning Tree Protocol (STP) Bridge Protocol Data Unit (BPDU) frames, aka Bug ID CSCtq36327.

A vulnerability has been identified in SIMATIC S7-1200 CPU V1 family (incl. SIPLUS variants) (All versions < V2.0.3), SIMATIC S7-1200 CPU V2 family (incl. SIPLUS variants) (All versions < V2.0.3). The web server interface of affected devices improperly processes incoming malformed HTTP traffic at high rate. This could allow an unauthenticated remote attacker to force the device entering the stop/defect state, thus creating a denial of service condition.

Transient DOS while processing CAG info IE received from NW.

Pillow before 8.1.2 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICO container, and thus an attempted memory allocation can be very large.

In modem EMM, there is a possible system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01183647; Issue ID: MOLY01183647 (MSV-963).

Improper Input Validation vulnerability in Hitachi ABB Power Grids Relion 670 Series, Relion 670/650 Series, Relion 670/650/SAM600-IO, Relion 650, REB500, RTU500 Series, FOX615 (TEGO1), MSM, GMS600, PWC600 allows an attacker with access to the IEC 61850 network with knowledge of how to reproduce the attack, as well as the IP addresses of the different IEC 61850 access points (of IEDs/products), to force the device to reboot, which renders the device inoperable for approximately 60 seconds. This vulnerability affects only products with IEC 61850 interfaces. This issue affects: Hitachi ABB Power Grids Relion 670 Series 1.1; 1.2.3 versions prior to 1.2.3.20; 2.0 versions prior to 2.0.0.13; 2.1; 2.2.2 versions prior to 2.2.2.3; 2.2.3 versions prior to 2.2.3.2. Hitachi ABB Power Grids Relion 670/650 Series 2.2.0 versions prior to 2.2.0.13. Hitachi ABB Power Grids Relion 670/650/SAM600-IO 2.2.1 versions prior to 2.2.1.6. Hitachi ABB Power Grids Relion 650 1.1; 1.2; 1.3 versions prior to 1.3.0.7. Hitachi ABB Power Grids REB500 7.3; 7.4; 7.5; 7.6; 8.2; 8.3. Hitachi ABB Power Grids RTU500 Series 7.x version 7.x and prior versions; 8.x version 8.x and prior versions; 9.x version 9.x and prior versions; 10.x version 10.x and prior versions; 11.x version 11.x and prior versions; 12.x version 12.x and prior versions. Hitachi ABB Power Grids FOX615 (TEGO1) R1D02 version R1D02 and prior versions. Hitachi ABB Power Grids MSM 2.1.0 versions prior to 2.1.0. Hitachi ABB Power Grids GMS600 1.3.0 version 1.3.0 and prior versions. Hitachi ABB Power Grids PWC600 1.0 versions prior to 1.0.1.4; 1.1 versions prior to 1.1.0.1.

Denial of Service attack in airMAX < 8.3.2 , airMAX < 6.0.7 and EdgeMAX < 1.9.7 allow attackers to use the Discovery Protocol in amplification attacks.

Oryx Embedded CycloneTCP 1.7.6 to 2.0.0, fixed in 2.0.2, is affected by incorrect input validation, which may cause a denial of service (DoS). To exploit the vulnerability, an attacker needs to have TCP connectivity to the target system. Receiving a maliciously crafted TCP packet from an unauthenticated endpoint is sufficient to trigger the bug.

The facial recognition module has a vulnerability in input parameter verification. Successful exploitation of this vulnerability may cause failed facial recognition.

Ceph is a distributed object, block, and file storage platform. In versions up to and including 19.2.3, using the argument `x-amz-copy-source` to put an object and specifying an empty string as its content leads to the RGW daemon crashing, resulting in a DoS attack. As of time of publication, no known patched versions exist.

The Stars Rating WordPress plugin before 3.5.1 does not validate the submitted rating, allowing submission of long integer, causing a Denial of Service in the comments section, or pending comment dashboard depending if the user sent it as unauthenticated or authenticated.