An issue in Blurams Lumi Security Camera (A31C) v23.1227.472.2926 allows local physical attackers to execute arbitrary code via overriding the bootloader on the SD card.
An issue in Blurams Lumi Security Camera (A31C) v.2.3.38.12558 allows a physically proximate attackers to execute arbitrary code.
An issue was discovered in Xen through 4.12.x allowing attackers to gain host OS privileges via DMA in a situation where an untrusted domain has access to a physical device (and assignable-add is not used), because of an incomplete fix for CVE-2019-18424. XSA-302 relies on the use of libxl's "assignable-add" feature to prepare devices to be assigned to untrusted guests. Unfortunately, this is not considered a strictly required step for device assignment. The PCI passthrough documentation on the wiki describes alternate ways of preparing devices for assignment, and libvirt uses its own ways as well. Hosts where these "alternate" methods are used will still leave the system in a vulnerable state after the device comes back from a guest. An untrusted domain with access to a physical device can DMA into host memory, leading to privilege escalation. Only systems where guests are given direct access to physical devices capable of DMA (PCI pass-through) are vulnerable. Systems which do not use PCI pass-through are not vulnerable.
Improper input validation in ABL may enable an attacker with physical access, to perform arbitrary memory overwrites, potentially leading to a loss of integrity and code execution.
An access control issue in the authentication module of Lexar_F35 v1.0.34 allows attackers to access sensitive data and cause a Denial of Service (DoS). An attacker without access to securely protected data on a secure USB flash drive can bypass user authentication without having any information related to the password of the registered user. The secure USB flash drive transmits the password entered by the user to the authentication module in the drive after the user registers a password, and then the input password is compared with the registered password stored in the authentication module. Subsequently, the module returns the comparison result for the authentication decision. Therefore, an attacker can bypass password authentication by analyzing the functions that return the password verification or comparison results and manipulate the authentication result values. Accordingly, even if attackers enter an incorrect password, they can be authenticated as a legitimate user and can therefore exploit functions of the secure USB flash drive by manipulating the authentication result values.
A weak default password for the serial port was reported in some Lenovo Personal Cloud Storage devices that could allow unauthorized device access to an attacker with physical access.
This issue was addressed by improving Face ID machine learning models. This issue is fixed in iOS 13. A 3D model constructed to look like the enrolled user may authenticate via Face ID.
A local authentication bypass vulnerability was discovered in some Aruba Instant Access Point (IAP) products in version(s): Aruba Instant 6.4.x: 6.4.4.8-4.2.4.18 and below; Aruba Instant 6.5.x: 6.5.4.15 and below; Aruba Instant 8.3.x: 8.3.0.11 and below; Aruba Instant 8.4.x: 8.4.0.5 and below; Aruba Instant 8.5.x: 8.5.0.6 and below; Aruba Instant 8.6.x: 8.6.0.2 and below. Aruba has released patches for Aruba Instant that address this security vulnerability.
An issue was discovered in certain Verbatim drives through 2022-03-31. Due to insufficient firmware validation, an attacker can store malicious firmware code for the USB-to-SATA bridge controller on the USB drive (e.g., by leveraging physical access during the supply chain). This code is then executed. This affects Keypad Secure USB 3.2 Gen 1 Drive Part Number #49428, Store 'n' Go Secure Portable HDD GD25LK01-3637-C VER4.0, Executive Fingerprint Secure SSD GDMSFE01-INI3637-C VER1.1, and Fingerprint Secure Portable Hard Drive Part Number #53650.
Insufficient input validation vulnerability in subsystem for Intel(R) AMT before versions 11.8.65, 11.11.65, 11.22.65, 12.0.35 may allow an unauthenticated user to potentially enable escalation of privilege via physical access.
Information disclosure in Core services while processing a Diag command.
Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects D6100 before 1.0.0.55, D7800 before V1.0.1.24, R7100LG before V1.0.0.32, WNDR4300v1 before 1.0.2.90, and WNDR4500v3 before 1.0.0.48.
Dell BIOS contains an Improper Input Validation vulnerability. An unauthenticated physical attacker may potentially exploit this vulnerability to perform arbitrary code execution.
The configuration from the PCU can be modified without authentication using physical connection to the PCU.
Medtronic identified that the Pelvic Health clinician apps, which are installed on the Smart Programmer mobile device, have a password vulnerability that requires a security update to fix. Not updating could potentially result in unauthorized control of the clinician therapy application, which has greater control over therapy parameters than the patient app. Changes still cannot be made outside of the established therapy parameters of the programmer. For unauthorized access to occur, an individual would need physical access to the Smart Programmer.
Insufficient input validation in subsystem for Intel(R) AMT before version 12.0.45 may allow an unauthenticated user to potentially enable escalation of privilege via physical access.
In (TBD) of (TBD), there is a possible way to bypass the lockscreen due to Biometric Auth Failure. This could lead to local escalation of privilege with physical access to the device with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-240428519References: N/A
A flaw in the input validation in TOBY-L2 allows a user to execute arbitrary operating system commands using specifically crafted AT commands. This vulnerability requires physical access to the serial interface of the module or the ability to modify the system or software which uses its serial interface to send malicious AT commands. Exploitation of the vulnerability gives full administrative (root) privileges to the attacker to execute any operating system command on TOBY-L2 which can lead to modification of the behavior of the module itself as well as the components connected with it (depending on its rights on other connected systems). It can further provide the ability to read system level files and hamper the availability of the module as well.. This issue affects TOBY-L2 series: TOBY-L200, TOBY-L201, TOBY-L210, TOBY-L220, TOBY-L280.
On Juniper Networks EX and QFX Series, an authentication bypass vulnerability may allow a user connected to the console port to login as root without any password. This issue might only occur in certain scenarios: • At the first reboot after performing device factory reset using the command “request system zeroize”; or • A temporary moment during the first reboot after the software upgrade when the device configured in Virtual Chassis mode. This issue affects Juniper Networks Junos OS on EX and QFX Series: 14.1X53 versions prior to 14.1X53-D53; 15.1 versions prior to 15.1R7-S4; 15.1X53 versions prior to 15.1X53-D593; 16.1 versions prior to 16.1R7-S4; 17.1 versions prior to 17.1R2-S11, 17.1R3-S1; 17.2 versions prior to 17.2R3-S3; 17.3 versions prior to 17.3R2-S5, 17.3R3-S6; 17.4 versions prior to 17.4R2-S9, 17.4R3; 18.1 versions prior to 18.1R3-S8; 18.2 versions prior to 18.2R2; 18.3 versions prior to 18.3R1-S7, 18.3R2. This issue does not affect Juniper Networks Junos OS 12.3.
In Sprecher Automation SPRECON-E-C/P/T3 CPU in variant PU244x a vulnerable firmware verification has been identified. Through physical access and hardware manipulation, an attacker might be able to bypass hardware-based code verification and thus inject and execute arbitrary code and gain full access of the device.
Missing protection mechanism for alternate hardware interface in SmaCam CS-QR10 all versions and SmaCam Night Vision CS-QR20 all versions allows an attacker to execute an arbitrary OS command by having the product connect to the product's specific serial connection
The security protection in Gigadevice GD32F103 devices allows physical attackers to redirect the control flow and execute arbitrary code via the debug interface.
Authentication Bypass in GNCC's GC2 Indoor Security Camera 1080P allows an attacker with physical access to gain a privileged command shell via the UART Debugging Port.
An exposed debug interface was reported in some Motorola-branded Binatone Hubble Cameras that could allow an attacker with physical access unauthorized access to the device.
Windows Mobile Broadband Driver Remote Code Execution Vulnerability
Windows Mobile Broadband Driver Remote Code Execution Vulnerability
An issue discovered in Yealink VP59 Teams Editions with firmware version 91.15.0.118 allows a physically proximate attacker to gain control of an account via a flaw in the factory reset procedure.
A vulnerability was reported in some Lenovo Desktop models that could allow unauthorized access to the boot menu, when the "BIOS Password At Boot Device List" BIOS setting is Yes.
Possible address manipulation from APP-NS while APP-S is configuring an RG where it tries to merge the address ranges in Snapdragon Connectivity, Snapdragon Mobile
An unauthenticated attacker with physical access to a computer with NetSetMan Pro before 5.0 installed, that has the pre-logon profile switch button within the Windows logon screen enabled, is able to drop to an administrative shell and execute arbitrary commands as SYSTEM via the "save log to file" feature. To accomplish this, the attacker can navigate to cmd.exe.
Improper authentication in firmware for some Intel(R) SSD DC Products may allow an unauthenticated user to potentially enable escalation of privilege via physical access.
Yubico pam-u2f before 1.1.1 has a logic issue that, depending on the pam-u2f configuration and the application used, could lead to a local PIN bypass. This issue does not allow user presence (touch) or cryptographic signature verification to be bypassed, so an attacker would still need to physically possess and interact with the YubiKey or another enrolled authenticator. If pam-u2f is configured to require PIN authentication, and the application using pam-u2f allows the user to submit NULL as the PIN, pam-u2f will attempt to perform a FIDO2 authentication without PIN. If this authentication is successful, the PIN requirement is bypassed.
Windows rndismp6.sys Remote Code Execution Vulnerability
Bypassing lock protection exists in Nextcloud Android app 3.6.0 when creating a multi-account and aborting the process.
An improper authentication vulnerability exists in Rocket.Chat Mobile App <4.14.1.22788 that allowed an attacker with physical access to a mobile device to bypass local authentication (PIN code).
There is an improper authentication vulnerability in some Hikvision DVR products. Due to the improper implementation of authentication for the serial port, an attacker with physical access could exploit this vulnerability by connecting to the affected products and run a series of commands.
Windows Mobile Broadband Driver Remote Code Execution Vulnerability
Prior Dell BIOS versions contain an Improper Authentication vulnerability. An unauthenticated attacker with physical access to the system could potentially exploit this vulnerability by bypassing drive security mechanisms in order to gain access to the system.
Improper access control vulnerability in Knox Manage prior to SMR Apr-2022 Release 1 allows that physical attackers can bypass Knox Manage using a function key of hardware keyboard.
Improper authentication vulnerability in S Secure prior to SMR Apr-2022 Release 1 allows physical attackers to use locked Myfiles app without authentication.
Dell Support Assist OS Recovery versions before 5.5.2 contain an Authentication Bypass vulnerability. An unauthenticated attacker with physical access to the system may exploit this vulnerability by bypassing OS Recovery authentication in order to run arbitrary code on the system as Administrator.
An improper authentication vulnerability has been reported to affect QNAP Authenticator. If an attacker gains physical access, they can then exploit the vulnerability to compromise the security of the system. We have already fixed the vulnerability in the following version: QNAP Authenticator 1.3.1.1227 and later
Sophos Disk Encryption (SDE) 5.x in Sophos Enterprise Console (SEC) 5.x before 5.2.2 does not enforce intended authentication requirements for a resume action from sleep mode, which allows physically proximate attackers to obtain desktop access by leveraging the absence of a login screen.
Improper Authentication vulnerabiity in Samsung Pass prior to version 4.3.00.17 allows physical attackers to bypass authentication.
Improper Authentication vulnerability in Samsung Pass prior to version 4.3.00.17 allows physical attackers to bypass authentication due to invalid exception handler.
An attacker may be able to bypass the OS application filter meant to restrict applications that can be executed by changing browser preferences to launch a separate process that in turn can execute arbitrary commands.
There is an improper authentication vulnerability in FLMG-10 10.0.1.0(H100SP22C00). Successful exploitation of this vulnerability may lead to a control of the victim device.
A vulnerability in the smart card login authentication of Cisco Duo for macOS could allow an unauthenticated attacker with physical access to bypass authentication. This vulnerability exists because the assigned user of a smart card is not properly matched with the authenticating user. An attacker could exploit this vulnerability by configuring a smart card login to bypass Duo authentication. A successful exploit could allow the attacker to use any personal identity verification (PIV) smart card for authentication, even if the smart card is not assigned to the authenticating user.
Netgear Nighthawk R6700 version 1.0.4.120 does not have sufficient protections for the UART console. A malicious actor with physical access to the device is able to connect to the UART port via a serial connection and execute commands as the root user without authentication.
An issue was discovered in the Headunit NTG6 in the MBUX Infotainment System on Mercedes-Benz vehicles through 2021. A Message Length is not checked in the HiQnet Protocol, leading to remote code execution.