In Exim before 4.99.2, when JSON lookup is enabled, an out-of-bounds heap write can occur when a JSON operator encounters malformed JSON in an untrusted header, because of an incorrect implementation of \ skipping.

Exim Improper Neutralization of Special Elements Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Exim. Authentication is not required to exploit this vulnerability. The specific flaw exists within the smtp service, which listens on TCP port 25 by default. The issue results from the lack of proper validation of user-supplied data, which can result in a memory corruption condition. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-17554.

Exim 4.98 before 4.98.1, when SQLite hints and ETRN serialization are used, allows remote SQL injection. (Resolving SQL injection requires an update to 4.99.1 in certain non-default rate-limit configurations.)

Exim 4 before 4.94.2 has Improper Neutralization of Line Delimiters, relevant in non-default configurations that enable Delivery Status Notification (DSN). Certain uses of ORCPT= can place a newline into a spool header file, and indirectly allow unauthenticated remote attackers to execute arbitrary commands as root.

Exim 4 before 4.94.2 allows Buffer Underwrite that may result in unauthenticated remote attackers executing arbitrary commands, because smtp_ungetc was only intended to push back characters, but can actually push back non-character error codes such as EOF.

Exim 4 before 4.92 allows Integer Overflow to Buffer Overflow, in which an unauthenticated remote attacker can execute arbitrary code by leveraging the mishandling of continuation lines during header-length restriction.

Exim 4 before 4.94.2 has Improper Restriction of Write Operations within the Bounds of a Memory Buffer. This occurs when processing name=value pairs within MAIL FROM and RCPT TO commands.

Exim 4 before 4.94.2 allows Use After Free in smtp_reset in certain situations that may be common for builds with OpenSSL.

Exim 4 before 4.94.2 allows Integer Overflow to Buffer Overflow in receive_add_recipient via an e-mail message with fifty million recipients. NOTE: remote exploitation may be difficult because of resource consumption.

Exim before 4.95 has a heap-based buffer overflow for the alias list in host_name_lookup in host.c when sender_host_name is set.

A vulnerability was found in Exim and classified as problematic. This issue affects the function dmarc_dns_lookup of the file dmarc.c of the component DMARC Handler. The manipulation leads to use after free. The attack may be initiated remotely. The name of the patch is 12fb3842f81bcbd4a4519d5728f2d7e0e3ca1445. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211919.

Heap-based buffer overflow in the string_vformat function in string.c in Exim before 4.70 allows remote attackers to execute arbitrary code via an SMTP session that includes two MAIL commands in conjunction with a large message containing crafted headers, leading to improper rejection logging.

Exim SMTP Challenge Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Exim. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of NTLM challenge requests. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the service account. . Was ZDI-CAN-17515.

An issue was discovered in the base64d function in the SMTP listener in Exim before 4.90.1. By sending a handcrafted message, a buffer overflow may happen. This can be used to execute code remotely.

Exim 4.92 through 4.92.2 allows remote code execution, a different vulnerability than CVE-2019-15846. There is a heap-based buffer overflow in string_vformat in string.c involving a long EHLO command.

A flaw was found in Exim versions 4.87 to 4.91 (inclusive). Improper validation of recipient address in deliver_message() function in /src/deliver.c may lead to remote command execution.

A vulnerability has been found in Cesanta Mongoose up to 7.20. This affects the function mg_tls_recv_cert of the file mongoose.c of the component TLS 1.3 Handler. Such manipulation of the argument pubkey leads to heap-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 7.21 mitigates this issue. The name of the patch is 0d882f1b43ff2308b7486a56a9d60cd6dba8a3f1. It is advisable to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.

Two potential heap out-of-bounds write locations existed in DecodeObjectId() in wolfcrypt/src/asn.c. First, a bounds check only validates one available slot before writing two OID arc values (out[0] and out[1]), enabling a 2-byte out-of-bounds write when outSz equals 1. Second, multiple callers pass sizeof(decOid) (64 bytes on 64-bit platforms) instead of the element count MAX_OID_SZ (32), causing the function to accept crafted OIDs with 33 or more arcs that write past the end of the allocated buffer.

Heap buffer overflow in DTLS 1.3 ACK message processing. A remote attacker can send a crafted DTLS 1.3 ACK message that triggers a heap buffer overflow.

Heap-based buffer overflow in the KCAPI ECC code path of wc_ecc_import_x963_ex() in wolfSSL wolfcrypt allows a remote attacker to write attacker-controlled data past the bounds of the pubkey_raw buffer via a crafted oversized EC public key point. The WOLFSSL_KCAPI_ECC code path copies the input to key->pubkey_raw (132 bytes) using XMEMCPY without a bounds check, unlike the ATECC code path which includes a length validation. This can be triggered during TLS key exchange when a malicious peer sends a crafted ECPoint in ServerKeyExchange.

A heap-based buffer overflow in the Kerberos hash parser in hashcat v7.1.2 allows an attacker to cause a denial of service or possibly execute arbitrary code via a crafted Kerberos hash file. The issue affects module_hash_decode in multiple Kerberos-related modules because account_info_len is calculated from untrusted delimiter positions without upper-bound validation before memcpy copies the data into a fixed-size account_info buffer.

Creolabs Gravity before 0.9.6 contains a heap buffer overflow vulnerability in the gravity_vm_exec function that allows attackers to write out-of-bounds memory by crafting scripts with many string literals at global scope. Attackers can exploit insufficient bounds checking in gravity_fiber_reassign() to corrupt heap metadata and achieve arbitrary code execution in applications that evaluate untrusted scripts.

Heap buffer overflow in Skia in Google Chrome prior to 121.0.6167.160 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

A heap-based buffer overflow flaw was found in the rsync daemon. This issue is due to improper handling of attacker-controlled checksum lengths (s2length) in the code. When MAX_DIGEST_LEN exceeds the fixed SUM_LENGTH (16 bytes), an attacker can write out of bounds in the sum2 buffer.

IBM Tivoli Monitoring 6.3.0.7 through 6.3.0.7 Service Pack 20 is vulnerable to a heap-based buffer overflow, caused by improper bounds checking. A remote attacker could overflow a buffer and execute arbitrary code on the system or cause the server to crash.

In Eclipse Mosquitto, from version 1.3.2 through 2.0.18, if a malicious broker sends a crafted SUBACK packet with no reason codes, a client using libmosquitto may make out of bounds memory access when acting in its on_subscribe callback. This affects the mosquitto_sub and mosquitto_rr clients.

Fuji Electric V-Server 4.0.3.0 and prior, A heap-based buffer overflow vulnerability has been identified, which may allow remote code execution.

A vulnerability was found in MicroPython up to 1.21.0. It has been classified as critical. Affected is the function slice_indices of the file objslice.c. The manipulation leads to heap-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.22.0 is able to address this issue. It is recommended to upgrade the affected component. The identifier of this vulnerability is VDB-249180.

A heap-based buffer overflow vulnerability exists in the exists in the network-facing input handling routines of Arcserve Unified Data Protection (UDP). This flaw is reachable without authentication and results from improper bounds checking when processing attacker-controlled input. By sending specially crafted data, a remote attacker can corrupt heap memory, potentially causing a denial of service or enabling arbitrary code execution depending on the memory layout and exploitation techniques used. This vulnerability is similar in nature to CVE-2025-34522 but affects a separate code path or component. No user interaction is required, and exploitation occurs in the context of the vulnerable process. This vulnerability affects all UDP versions prior to 10.2. UDP 10.2 includes the necessary patches and requires no action. Versions 8.0 through 10.1 are supported and require either patch application or upgrade to 10.2. Versions 7.x and earlier are unsupported or out of maintenance and must be upgraded to 10.2 to remediate the issue.

A heap-based buffer overflow vulnerability exists in the input parsing logic of Arcserve Unified Data Protection (UDP). This flaw can be triggered without authentication by sending specially crafted input to the target system. Improper bounds checking allows an attacker to overwrite heap memory, potentially leading to application crashes or remote code execution. Exploitation occurs in the context of the affected process and does not require user interaction. The vulnerability poses a high risk due to its pre-authentication nature and potential for full compromise. This vulnerability affects all UDP versions prior to 10.2. UDP 10.2 includes the necessary patches and requires no action. Versions 8.0 through 10.1 are supported and require either patch application or upgrade to 10.2. Versions 7.x and earlier are unsupported or out of maintenance and must be upgraded to 10.2 to remediate the issue.

IBM Tivoli Monitoring 6.3.0.7 through 6.3.0.7 Service Pack 20 is vulnerable to a heap-based buffer overflow, caused by improper bounds checking. A remote attacker could overflow a buffer and execute arbitrary code on the system or cause the server to crash.

Two buffer overflow vulnerabilities existed in the wolfSSL CRL parser when parsing CRL numbers: a heap-based buffer overflow could occur when improperly storing the CRL number as a hexadecimal string, and a stack-based overflow for sufficiently sized CRL numbers. With appropriately crafted CRLs, either of these out of bound writes could be triggered. Note this only affects builds that specifically enable CRL support, and the user would need to load a CRL from an untrusted source.

An Heap-based Buffer Overflow in RT-Labs P-Net version 1.0.1 or earlier allows an attacker to corrupt the memory of IO devices that use the library by sending a malicious RPC packet.

Heap Overflow in TLS 1.3 ECH parsing. An integer underflow existed in ECH extension parsing logic when calculating a buffer length, which resulted in writing beyond the bounds of an allocated buffer. Note that in wolfSSL, ECH is off by default, and the ECH standard is still evolving.

An integer overflow can be triggered in SQLite’s `concat_ws()` function. The resulting, truncated integer is then used to allocate a buffer. When SQLite then writes the resulting string to the buffer, it uses the original, untruncated size and thus a wild Heap Buffer overflow of size ~4GB can be triggered. This can result in arbitrary code execution.

PJSIP is a free and open source multimedia communication library written in C. Versions 2.16 and below have a Heap-based Buffer Overflowvulnerability in the DNS parser's name length handler. Thisimpacts applications using PJSIP's built-in DNS resolver, such as those configured with pjsua_config.nameserver or UaConfig.nameserver in PJSUA/PJSUA2. It does not affect users who rely on the OS resolver (e.g., getaddrinfo()) by not configuring a nameserver, or those using an external resolver via pjsip_resolver_set_ext_resolver(). This issue is fixed in version 2.17. For users unable to upgrade, a workaround is to disable DNS resolution in the PJSIP config (by setting nameserver_count to zero) or to use an external resolver implementation instead.

SD-330AC and AMC Manager provided by silex technology, Inc. contain a heap-based buffer overflow vulnerability in processing the redirect URLs. Arbitrary code may be executed on the device.

FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.24.0, a size_t underflow in the IMA-ADPCM and MS-ADPCM audio decoders leads to heap-buffer-overflow write via the RDPSND audio channel. In libfreerdp/codec/dsp.c, the IMA-ADPCM and MS-ADPCM decoders subtract block header sizes from a size_t variable without checking for underflow. When nBlockAlign (received from the server) is set such that size % block_size == 0 triggers the header parsing at a point where size is smaller than the header (4 or 8 bytes), the subtraction wraps size to ~SIZE_MAX. The while (size > 0) loop then continues for an astronomical number of iterations. This vulnerability is fixed in 3.24.0.

The vulnerability allows an unauthenticated remote attacker to perform a Denial-of-Service (DoS) attack or, possibly, obtain Remote Code Execution (RCE) via a crafted network request.

CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. A critical heap buffer overflow vulnerability was identified in the `Crypto_AOS_ProcessSecurity` function of CryptoLib versions 1.3.3 and prior. This vulnerability allows an attacker to trigger a Denial of Service (DoS) or potentially execute arbitrary code (RCE) by providing a maliciously crafted AOS frame with an insufficient length. The vulnerability lies in the function `Crypto_AOS_ProcessSecurity`, specifically during the processing of the Frame Error Control Field (FECF). The affected code attempts to read from the `p_ingest` buffer at indices `current_managed_parameters_struct.max_frame_size - 2` and `current_managed_parameters_struct.max_frame_size - 1` without verifying if `len_ingest` is sufficiently large. This leads to a heap buffer overflow when `len_ingest` is smaller than `max_frame_size`. As of time of publication, no known patched versions exist.

FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.24.0, the gdi_surface_bits() function processes SURFACE_BITS_COMMAND messages sent by the RDP server. When the command is handled using NSCodec, the bmp.width and bmp.height values provided by the server are not properly validated against the actual desktop dimensions. A malicious RDP server can supply crafted bmp.width and bmp.height values that exceed the expected surface size. Because these values are used during bitmap decoding and memory operations without proper bounds checking, this can lead to a heap buffer overflow. Since the attacker can also control the associated pixel data transmitted by the server, the overflow may be exploitable to overwrite adjacent heap memory. This vulnerability is fixed in 3.24.0.

CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. In versions 1.3.3 and prior, an unsigned integer underflow in the `Crypto_TC_ProcessSecurity` function of CryptoLib leads to a heap buffer overflow. The vulnerability is triggered when the `fl` (frame length) field in a Telecommand (TC) packet is set to 0. This underflow causes the frame length to be interpreted as 65535, resulting in out-of-bounds memory access. This critical vulnerability can be exploited to cause a denial of service (DoS) or potentially achieve remote code execution. Users of CryptoLib are advised to apply the recommended patch or avoid processing untrusted TC packets until a fix is available.

PX4-Autopilot provides PX4 flight control solution for drones. In versions 1.14.0-rc1 and prior, PX4-Autopilot has a heap buffer overflow vulnerability in the parser function due to the absence of `parserbuf_index` value checking. A malfunction of the sensor device can cause a heap buffer overflow with leading unexpected drone behavior. Malicious applications can exploit the vulnerability even if device sensor malfunction does not occur. Up to the maximum value of an `unsigned int`, bytes sized data can be written to the heap memory area. As of time of publication, no fixed version is available.

A heap-based buffer overflow vulnerability exists in the HTTP Server functionality of Weston Embedded uC-HTTP git commit 80d4004. A specially crafted network packet can lead to arbitrary code execution. An attacker can send a malicious packet to trigger this vulnerability.

A vulnerability was identified in gmg137 snap7-rs up to 153d3e8c16decd7271e2a5b2e3da4d6f68589424. Affected by this issue is the function snap7_rs::client::S7Client::download of the file client.rs. Such manipulation leads to heap-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet.

Heap-based Buffer Overflow vulnerability in mod_proxy_ajp of Apache HTTP Server. If mod_proxy_ajp connects to a malicious AJP server this AJP server can send a malicious AJP message back to mod_proxy_ajp and cause it to write 4 attacker controlled bytes after the end of a heap based buffer. This issue affects Apache HTTP Server: through 2.4.66. Users are recommended to upgrade to version 2.4.67, which fixes the issue.

A vulnerability, which was classified as critical, has been found in D-Link DAP-1620 1.03. Affected by this issue is the function set_ws_action of the file /dws/api/ of the component Path Handler. The manipulation leads to heap-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

All versions of GE Digital CIMPLICITY that are not adhering to SDG guidance and accepting documents from untrusted sources are vulnerable to memory corruption issues due to insufficient input validation, including issues such as out-of-bounds reads and writes, use-after-free, stack-based buffer overflows, uninitialized pointers, and a heap-based buffer overflow. Successful exploitation could allow an attacker to execute arbitrary code.

A heap-based buffer overflow vulnerability in Fortinet FortiOS 7.6.0 through 7.6.3, FortiOS 7.4.0 through 7.4.8, FortiOS 7.2.0 through 7.2.11, FortiOS 7.0.0 through 7.0.17, FortiOS 6.4 all versions, FortiSwitchManager 7.2.0 through 7.2.6, FortiSwitchManager 7.0.0 through 7.0.5 allows attacker to execute unauthorized code or commands via specially crafted packets

SAIL is a cross-platform library for loading and saving images with support for animation, metadata, and ICC profiles. All versions are vulnerable to Heap-based Buffer Overflow through the XWD parser's use of the bytes_per_line value. The value os read directly from the file as the read size in io->strict_read(), and is never compared to the actual size of the destination buffer. An attacker can provide an XWD file with an arbitrarily large bytes_per_line, causing a massive write operation beyond the buffer heap allocated for the image pixels. The issue did not have a fix at the time of publication.