In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix integer overflows on 32 bit systems On 32bit systems the addition operations in ipc_msg_alloc() can potentially overflow leading to memory corruption. Add bounds checking using KSMBD_IPC_MAX_PAYLOAD to avoid overflow.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix integer overflow while processing acregmax mount option User-provided mount parameter acregmax of type u32 is intended to have an upper limit, but before it is validated, the value is converted from seconds to jiffies which can lead to an integer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device ethnl_req_get_phydev() is used to lookup a phy_device, in the case an ethtool netlink command targets a specific phydev within a netdev's topology. It takes as a parameter a const struct nlattr *header that's used for error handling : if (!phydev) { NL_SET_ERR_MSG_ATTR(extack, header, "no phy matching phyindex"); return ERR_PTR(-ENODEV); } In the notify path after a ->set operation however, there's no request attributes available. The typical callsite for the above function looks like: phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_XXX_HEADER], info->extack); So, when tb is NULL (such as in the ethnl notify path), we have a nice crash. It turns out that there's only the PLCA command that is in that case, as the other phydev-specific commands don't have a notification. This commit fixes the crash by passing the cmd index and the nlattr array separately, allowing NULL-checking it directly inside the helper.

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw(). fib_check_nh_v6_gw() expects that fib6_nh_init() cleans up everything when it fails. Commit 7dd73168e273 ("ipv6: Always allocate pcpu memory in a fib6_nh") moved fib_nh_common_init() before alloc_percpu_gfp() within fib6_nh_init() but forgot to add cleanup for fib6_nh->nh_common.nhc_pcpu_rth_output in case it fails to allocate fib6_nh->rt6i_pcpu, resulting in memleak. Let's call fib_nh_common_release() and clear nhc_pcpu_rth_output in the error path. Note that we can remove the fib6_nh_release() call in nh_create_ipv6() later in net-next.git.

In the Linux kernel, the following vulnerability has been resolved: idpf: fix checksums set in idpf_rx_rsc() idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header is not set yet. This triggers the following warning for CONFIG_DEBUG_NET=y builds. DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)) [ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth [ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697 [ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN [ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748) [ 69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261687] ? report_bug (lib/bug.c:?) [ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285) [ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309) [ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [ 69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf [ 69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf [ 69.261712] __napi_poll (net/core/dev.c:7194) [ 69.261716] net_rx_action (net/core/dev.c:7265) [ 69.261718] ? __qdisc_run (net/sched/sch_generic.c:293) [ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288) [ 69.261726] handle_softirqs (kernel/softirq.c:561)

In the Linux kernel, the following vulnerability has been resolved: regulator: dummy: force synchronous probing Sometimes I get a NULL pointer dereference at boot time in kobject_get() with the following call stack: anatop_regulator_probe() devm_regulator_register() regulator_register() regulator_resolve_supply() kobject_get() By placing some extra BUG_ON() statements I could verify that this is raised because probing of the 'dummy' regulator driver is not completed ('dummy_regulator_rdev' is still NULL). In the JTAG debugger I can see that dummy_regulator_probe() and anatop_regulator_probe() can be run by different kernel threads (kworker/u4:*). I haven't further investigated whether this can be changed or if there are other possibilities to force synchronization between these two probe routines. On the other hand I don't expect much boot time penalty by probing the 'dummy' regulator synchronously.

In the Linux kernel, the following vulnerability has been resolved: nfp: bpf: Add check for nfp_app_ctrl_msg_alloc() Add check for the return value of nfp_app_ctrl_msg_alloc() in nfp_bpf_cmsg_alloc() to prevent null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: stream-ipc: Check for cstream nullity in sof_ipc_msg_data() The nullity of sps->cstream should be checked similarly as it is done in sof_set_stream_data_offset() function. Assuming that it is not NULL if sps->stream is NULL is incorrect and can lead to NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: net: fix NULL pointer dereference in l3mdev_l3_rcv When delete l3s ipvlan: ip link del link eth0 ipvlan1 type ipvlan mode l3s This may cause a null pointer dereference: Call trace: ip_rcv_finish+0x48/0xd0 ip_rcv+0x5c/0x100 __netif_receive_skb_one_core+0x64/0xb0 __netif_receive_skb+0x20/0x80 process_backlog+0xb4/0x204 napi_poll+0xe8/0x294 net_rx_action+0xd8/0x22c __do_softirq+0x12c/0x354 This is because l3mdev_l3_rcv() visit dev->l3mdev_ops after ipvlan_l3s_unregister() assign the dev->l3mdev_ops to NULL. The process like this: (CPU1) | (CPU2) l3mdev_l3_rcv() | check dev->priv_flags: | master = skb->dev; | | | ipvlan_l3s_unregister() | set dev->priv_flags | dev->l3mdev_ops = NULL; | visit master->l3mdev_ops | To avoid this by do not set dev->l3mdev_ops when unregister l3s ipvlan.

In the Linux kernel, the following vulnerability has been resolved: filemap: avoid truncating 64-bit offset to 32 bits On 32-bit kernels, folio_seek_hole_data() was inadvertently truncating a 64-bit value to 32 bits, leading to a possible infinite loop when writing to an xfs filesystem.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't flush non-uploaded STAs If STA state is pre-moved to AUTHORIZED (such as in IBSS scenarios) and insertion fails, the station is freed. In this case, the driver never knew about the station, so trying to flush it is unexpected and may crash. Check if the sta was uploaded to the driver before and fix this.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Add check for mgmt_alloc_skb() in mgmt_device_connected() Add check for the return value of mgmt_alloc_skb() in mgmt_device_connected() to prevent null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leak in ceph_mds_auth_match() We now free the temporary target path substring allocation on every possible branch, instead of omitting the default branch. In some cases, a memory leak occured, which could rapidly crash the system (depending on how many file accesses were attempted). This was detected in production because it caused a continuous memory growth, eventually triggering kernel OOM and completely hard-locking the kernel. Relevant kmemleak stacktrace: unreferenced object 0xffff888131e69900 (size 128): comm "git", pid 66104, jiffies 4295435999 hex dump (first 32 bytes): 76 6f 6c 75 6d 65 73 2f 63 6f 6e 74 61 69 6e 65 volumes/containe 72 73 2f 67 69 74 65 61 2f 67 69 74 65 61 2f 67 rs/gitea/gitea/g backtrace (crc 2f3bb450): [<ffffffffaa68fb49>] __kmalloc_noprof+0x359/0x510 [<ffffffffc32bf1df>] ceph_mds_check_access+0x5bf/0x14e0 [ceph] [<ffffffffc3235722>] ceph_open+0x312/0xd80 [ceph] [<ffffffffaa7dd786>] do_dentry_open+0x456/0x1120 [<ffffffffaa7e3729>] vfs_open+0x79/0x360 [<ffffffffaa832875>] path_openat+0x1de5/0x4390 [<ffffffffaa834fcc>] do_filp_open+0x19c/0x3c0 [<ffffffffaa7e44a1>] do_sys_openat2+0x141/0x180 [<ffffffffaa7e4945>] __x64_sys_open+0xe5/0x1a0 [<ffffffffac2cc2f7>] do_syscall_64+0xb7/0x210 [<ffffffffac400130>] entry_SYSCALL_64_after_hwframe+0x77/0x7f It can be triggered by mouting a subdirectory of a CephFS filesystem, and then trying to access files on this subdirectory with an auth token using a path-scoped capability: $ ceph auth get client.services [client.services] key = REDACTED caps mds = "allow rw fsname=cephfs path=/volumes/" caps mon = "allow r fsname=cephfs" caps osd = "allow rw tag cephfs data=cephfs" $ cat /proc/self/mounts services@[REDACTED].cephfs=/volumes/containers /ceph/containers ceph rw,noatime,name=services,secret=<hidden>,ms_mode=prefer-crc,mount_timeout=300,acl,mon_addr=[REDACTED]:3300,recover_session=clean 0 0 $ seq 1 1000000 | xargs -P32 --replace={} touch /ceph/containers/file-{} && \ seq 1 1000000 | xargs -P32 --replace={} cat /ceph/containers/file-{} [ idryomov: combine if statements, rename rc to path_matched and make it a bool, formatting ]

In the Linux kernel, the following vulnerability has been resolved: fs/netfs/read_collect: add to next->prev_donated If multiple subrequests donate data to the same "next" request (depending on the subrequest completion order), each of them would overwrite the `prev_donated` field, causing data corruption and a BUG() crash ("Can't donate prior to front").

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Ensure job pointer is set to NULL after job completion After a job completes, the corresponding pointer in the device must be set to NULL. Failing to do so triggers a warning when unloading the driver, as it appears the job is still active. To prevent this, assign the job pointer to NULL after completing the job, indicating the job has finished.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add sync after creating vram bo There will be data corruption on vram allocated by svm if the initialization is not complete and application is writting on the memory. Adding sync to wait for the initialization completion is to resolve this issue.

In the Linux kernel, the following vulnerability has been resolved: usb: atm: cxacru: fix a flaw in existing endpoint checks Syzbot once again identified a flaw in usb endpoint checking, see [1]. This time the issue stems from a commit authored by me (2eabb655a968 ("usb: atm: cxacru: fix endpoint checking in cxacru_bind()")). While using usb_find_common_endpoints() may usually be enough to discard devices with wrong endpoints, in this case one needs more than just finding and identifying the sufficient number of endpoints of correct types - one needs to check the endpoint's address as well. Since cxacru_bind() fills URBs with CXACRU_EP_CMD address in mind, switch the endpoint verification approach to usb_check_XXX_endpoints() instead to fix incomplete ep testing. [1] Syzbot report: usb 5-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 1378 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... RIP: 0010:usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> cxacru_cm+0x3c8/0xe50 drivers/usb/atm/cxacru.c:649 cxacru_card_status drivers/usb/atm/cxacru.c:760 [inline] cxacru_bind+0xcf9/0x1150 drivers/usb/atm/cxacru.c:1223 usbatm_usb_probe+0x314/0x1d30 drivers/usb/atm/usbatm.c:1058 cxacru_usb_probe+0x184/0x220 drivers/usb/atm/cxacru.c:1377 usb_probe_interface+0x641/0xbb0 drivers/usb/core/driver.c:396 really_probe+0x2b9/0xad0 drivers/base/dd.c:658 __driver_probe_device+0x1a2/0x390 drivers/base/dd.c:800 driver_probe_device+0x50/0x430 drivers/base/dd.c:830 ...

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix implicit ODP hang on parent deregistration Fix the destroy_unused_implicit_child_mr() to prevent hanging during parent deregistration as of below [1]. Upon entering destroy_unused_implicit_child_mr(), the reference count for the implicit MR parent is incremented using: refcount_inc_not_zero(). A corresponding decrement must be performed if free_implicit_child_mr_work() is not called. The code has been updated to properly manage the reference count that was incremented. [1] INFO: task python3:2157 blocked for more than 120 seconds. Not tainted 6.12.0-rc7+ #1633 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:python3 state:D stack:0 pid:2157 tgid:2157 ppid:1685 flags:0x00000000 Call Trace: <TASK> __schedule+0x420/0xd30 schedule+0x47/0x130 __mlx5_ib_dereg_mr+0x379/0x5d0 [mlx5_ib] ? __pfx_autoremove_wake_function+0x10/0x10 ib_dereg_mr_user+0x5f/0x120 [ib_core] ? lock_release+0xc6/0x280 destroy_hw_idr_uobject+0x1d/0x60 [ib_uverbs] uverbs_destroy_uobject+0x58/0x1d0 [ib_uverbs] uobj_destroy+0x3f/0x70 [ib_uverbs] ib_uverbs_cmd_verbs+0x3e4/0xbb0 [ib_uverbs] ? __pfx_uverbs_destroy_def_handler+0x10/0x10 [ib_uverbs] ? lock_acquire+0xc1/0x2f0 ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0x116/0x170 [ib_uverbs] ? lock_release+0xc6/0x280 ib_uverbs_ioctl+0xe7/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] __x64_sys_ioctl+0x1b0/0xa70 ? kmem_cache_free+0x221/0x400 do_syscall_64+0x6b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f20f21f017b RSP: 002b:00007ffcfc4a77c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffcfc4a78d8 RCX: 00007f20f21f017b RDX: 00007ffcfc4a78c0 RSI: 00000000c0181b01 RDI: 0000000000000003 RBP: 00007ffcfc4a78a0 R08: 000056147d125190 R09: 00007f20f1f14c60 R10: 0000000000000001 R11: 0000000000000246 R12: 00007ffcfc4a7890 R13: 000000000000001c R14: 000056147d100fc0 R15: 00007f20e365c9d0 </TASK>

In the Linux kernel, the following vulnerability has been resolved: ipv4: use RCU protection in __ip_rt_update_pmtu() __ip_rt_update_pmtu() must use RCU protection to make sure the net structure it reads does not disappear.

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: fix error handling causing NULL dereference tcf_exts_miss_cookie_base_alloc() calls xa_alloc_cyclic() which can return 1 if the allocation succeeded after wrapping. This was treated as an error, with value 1 returned to caller tcf_exts_init_ex() which sets exts->actions to NULL and returns 1 to caller fl_change(). fl_change() treats err == 1 as success, calling tcf_exts_validate_ex() which calls tcf_action_init() with exts->actions as argument, where it is dereferenced. Example trace: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 114 PID: 16151 Comm: handler114 Kdump: loaded Not tainted 5.14.0-503.16.1.el9_5.x86_64 #1 RIP: 0010:tcf_action_init+0x1f8/0x2c0 Call Trace: tcf_action_init+0x1f8/0x2c0 tcf_exts_validate_ex+0x175/0x190 fl_change+0x537/0x1120 [cls_flower]

In the Linux kernel, the following vulnerability has been resolved: NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback Add PF_KCOMPACTD flag and current_is_kcompactd() helper to check for it so nfs_release_folio() can skip calling nfs_wb_folio() from kcompactd. Otherwise NFS can deadlock waiting for kcompactd enduced writeback which recurses back to NFS (which triggers writeback to NFSD via NFS loopback mount on the same host, NFSD blocks waiting for XFS's call to __filemap_get_folio): 6070.550357] INFO: task kcompactd0:58 blocked for more than 4435 seconds. {--- [58] "kcompactd0" [<0>] folio_wait_bit+0xe8/0x200 [<0>] folio_wait_writeback+0x2b/0x80 [<0>] nfs_wb_folio+0x80/0x1b0 [nfs] [<0>] nfs_release_folio+0x68/0x130 [nfs] [<0>] split_huge_page_to_list_to_order+0x362/0x840 [<0>] migrate_pages_batch+0x43d/0xb90 [<0>] migrate_pages_sync+0x9a/0x240 [<0>] migrate_pages+0x93c/0x9f0 [<0>] compact_zone+0x8e2/0x1030 [<0>] compact_node+0xdb/0x120 [<0>] kcompactd+0x121/0x2e0 [<0>] kthread+0xcf/0x100 [<0>] ret_from_fork+0x31/0x40 [<0>] ret_from_fork_asm+0x1a/0x30 ---} [akpm@linux-foundation.org: fix build]

In the Linux kernel, the following vulnerability has been resolved: net: fec: handle page_pool_dev_alloc_pages error The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did not handle the case when it returned NULL. There was a WARN_ON(!new_page) but it would still proceed to use the NULL pointer and then crash. This case does seem somewhat rare but when the system is under memory pressure it can happen. One case where I can duplicate this with some frequency is when writing over a smbd share to a SATA HDD attached to an imx6q. Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve the problem for my test case. But it still seems wrong that the fec driver ignores the memory allocation error and can crash. This commit handles the allocation error by dropping the current packet.

In the Linux kernel, the following vulnerability has been resolved: ARM: dts: bcm2711: Fix xHCI power-domain During s2idle tests on the Raspberry CM4 the VPU firmware always crashes on xHCI power-domain resume: root@raspberrypi:/sys/power# echo freeze > state [ 70.724347] xhci_suspend finished [ 70.727730] xhci_plat_suspend finished [ 70.755624] bcm2835-power bcm2835-power: Power grafx off [ 70.761127] USB: Set power to 0 [ 74.653040] USB: Failed to set power to 1 (-110) This seems to be caused because of the mixed usage of raspberrypi-power and bcm2835-power at the same time. So avoid the usage of the VPU firmware power-domain driver, which prevents the VPU crash.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: clean up ROC on failure If the firmware fails to start the session protection, then we do call iwl_mvm_roc_finished() here, but that won't do anything at all because IWL_MVM_STATUS_ROC_P2P_RUNNING was never set. Set IWL_MVM_STATUS_ROC_P2P_RUNNING in the failure/stop path. If it started successfully before, it's already set, so that doesn't matter, and if it didn't start it needs to be set to clean up. Not doing so will lead to a WARN_ON() later on a fresh remain- on-channel, since the link is already active when activated as it was never deactivated.

In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: remove kernfs active break A warning was found: WARNING: CPU: 10 PID: 3486953 at fs/kernfs/file.c:828 CPU: 10 PID: 3486953 Comm: rmdir Kdump: loaded Tainted: G RIP: 0010:kernfs_should_drain_open_files+0x1a1/0x1b0 RSP: 0018:ffff8881107ef9e0 EFLAGS: 00010202 RAX: 0000000080000002 RBX: ffff888154738c00 RCX: dffffc0000000000 RDX: 0000000000000007 RSI: 0000000000000004 RDI: ffff888154738c04 RBP: ffff888154738c04 R08: ffffffffaf27fa15 R09: ffffed102a8e7180 R10: ffff888154738c07 R11: 0000000000000000 R12: ffff888154738c08 R13: ffff888750f8c000 R14: ffff888750f8c0e8 R15: ffff888154738ca0 FS: 00007f84cd0be740(0000) GS:ffff8887ddc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555f9fbe00c8 CR3: 0000000153eec001 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: kernfs_drain+0x15e/0x2f0 __kernfs_remove+0x165/0x300 kernfs_remove_by_name_ns+0x7b/0xc0 cgroup_rm_file+0x154/0x1c0 cgroup_addrm_files+0x1c2/0x1f0 css_clear_dir+0x77/0x110 kill_css+0x4c/0x1b0 cgroup_destroy_locked+0x194/0x380 cgroup_rmdir+0x2a/0x140 It can be explained by: rmdir echo 1 > cpuset.cpus kernfs_fop_write_iter // active=0 cgroup_rm_file kernfs_remove_by_name_ns kernfs_get_active // active=1 __kernfs_remove // active=0x80000002 kernfs_drain cpuset_write_resmask wait_event //waiting (active == 0x80000001) kernfs_break_active_protection // active = 0x80000001 // continue kernfs_unbreak_active_protection // active = 0x80000002 ... kernfs_should_drain_open_files // warning occurs kernfs_put_active This warning is caused by 'kernfs_break_active_protection' when it is writing to cpuset.cpus, and the cgroup is removed concurrently. The commit 3a5a6d0c2b03 ("cpuset: don't nest cgroup_mutex inside get_online_cpus()") made cpuset_hotplug_workfn asynchronous, This change involves calling flush_work(), which can create a multiple processes circular locking dependency that involve cgroup_mutex, potentially leading to a deadlock. To avoid deadlock. the commit 76bb5ab8f6e3 ("cpuset: break kernfs active protection in cpuset_write_resmask()") added 'kernfs_break_active_protection' in the cpuset_write_resmask. This could lead to this warning. After the commit 2125c0034c5d ("cgroup/cpuset: Make cpuset hotplug processing synchronous"), the cpuset_write_resmask no longer needs to wait the hotplug to finish, which means that concurrent hotplug and cpuset operations are no longer possible. Therefore, the deadlock doesn't exist anymore and it does not have to 'break active protection' now. To fix this warning, just remove kernfs_break_active_protection operation in the 'cpuset_write_resmask'.

In the Linux kernel, the following vulnerability has been resolved: driver core: class: Fix wild pointer dereferences in API class_dev_iter_next() There are a potential wild pointer dereferences issue regarding APIs class_dev_iter_(init|next|exit)(), as explained by below typical usage: // All members of @iter are wild pointers. struct class_dev_iter iter; // class_dev_iter_init(@iter, @class, ...) checks parameter @class for // potential class_to_subsys() error, and it returns void type and does // not initialize its output parameter @iter, so caller can not detect // the error and continues to invoke class_dev_iter_next(@iter) even if // @iter still contains wild pointers. class_dev_iter_init(&iter, ...); // Dereference these wild pointers in @iter here once suffer the error. while (dev = class_dev_iter_next(&iter)) { ... }; // Also dereference these wild pointers here. class_dev_iter_exit(&iter); Actually, all callers of these APIs have such usage pattern in kernel tree. Fix by: - Initialize output parameter @iter by memset() in class_dev_iter_init() and give callers prompt by pr_crit() for the error. - Check if @iter is valid in class_dev_iter_next().

In the Linux kernel, the following vulnerability has been resolved: PCI: Avoid putting some root ports into D3 on TUXEDO Sirius Gen1 commit 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") sets the policy that all PCIe ports are allowed to use D3. When the system is suspended if the port is not power manageable by the platform and won't be used for wakeup via a PME this sets up the policy for these ports to go into D3hot. This policy generally makes sense from an OSPM perspective but it leads to problems with wakeup from suspend on the TUXEDO Sirius 16 Gen 1 with a specific old BIOS. This manifests as a system hang. On the affected Device + BIOS combination, add a quirk for the root port of the problematic controller to ensure that these root ports are not put into D3hot at suspend. This patch is based on https://lore.kernel.org/linux-pci/20230708214457.1229-2-mario.limonciello@amd.com but with the added condition both in the documentation and in the code to apply only to the TUXEDO Sirius 16 Gen 1 with a specific old BIOS and only the affected root ports.

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix uninitialized size issue in radeon_vce_cs_parse() On the off chance that command stream passed from userspace via ioctl() call to radeon_vce_cs_parse() is weirdly crafted and first command to execute is to encode (case 0x03000001), the function in question will attempt to call radeon_vce_cs_reloc() with size argument that has not been properly initialized. Specifically, 'size' will point to 'tmp' variable before the latter had a chance to be assigned any value. Play it safe and init 'tmp' with 0, thus ensuring that radeon_vce_cs_reloc() will catch an early error in cases like these. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. (cherry picked from commit 2d52de55f9ee7aaee0e09ac443f77855989c6b68)

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix null pointer dereference in alloc_preauth_hash() The Client send malformed smb2 negotiate request. ksmbd return error response. Subsequently, the client can send smb2 session setup even thought conn->preauth_info is not allocated. This patch add KSMBD_SESS_NEED_SETUP status of connection to ignore session setup request if smb2 negotiate phase is not complete.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix incorrect validation for num_aces field of smb_acl parse_dcal() validate num_aces to allocate posix_ace_state_array. if (num_aces > ULONG_MAX / sizeof(struct smb_ace *)) It is an incorrect validation that we can create an array of size ULONG_MAX. smb_acl has ->size field to calculate actual number of aces in request buffer size. Use this to check invalid num_aces.

In the Linux kernel, the following vulnerability has been resolved: HID: corsair-void: Update power supply values with a unified work handler corsair_void_process_receiver can be called from an interrupt context, locking battery_mutex in it was causing a kernel panic. Fix it by moving the critical section into its own work, sharing this work with battery_add_work and battery_remove_work to remove the need for any locking

In the Linux kernel, the following vulnerability has been resolved: media: vimc: skip .s_stream() for stopped entities Syzbot reported [1] a warning prompted by a check in call_s_stream() that checks whether .s_stream() operation is warranted for unstarted or stopped subdevs. Add a simple fix in vimc_streamer_pipeline_terminate() ensuring that entities skip a call to .s_stream() unless they have been previously properly started. [1] Syzbot report: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 5933 at drivers/media/v4l2-core/v4l2-subdev.c:460 call_s_stream+0x2df/0x350 drivers/media/v4l2-core/v4l2-subdev.c:460 Modules linked in: CPU: 0 UID: 0 PID: 5933 Comm: syz-executor330 Not tainted 6.13.0-rc2-syzkaller-00362-g2d8308bf5b67 #0 ... Call Trace: <TASK> vimc_streamer_pipeline_terminate+0x218/0x320 drivers/media/test-drivers/vimc/vimc-streamer.c:62 vimc_streamer_pipeline_init drivers/media/test-drivers/vimc/vimc-streamer.c:101 [inline] vimc_streamer_s_stream+0x650/0x9a0 drivers/media/test-drivers/vimc/vimc-streamer.c:203 vimc_capture_start_streaming+0xa1/0x130 drivers/media/test-drivers/vimc/vimc-capture.c:256 vb2_start_streaming+0x15f/0x5a0 drivers/media/common/videobuf2/videobuf2-core.c:1789 vb2_core_streamon+0x2a7/0x450 drivers/media/common/videobuf2/videobuf2-core.c:2348 vb2_streamon drivers/media/common/videobuf2/videobuf2-v4l2.c:875 [inline] vb2_ioctl_streamon+0xf4/0x170 drivers/media/common/videobuf2/videobuf2-v4l2.c:1118 __video_do_ioctl+0xaf0/0xf00 drivers/media/v4l2-core/v4l2-ioctl.c:3122 video_usercopy+0x4d2/0x1620 drivers/media/v4l2-core/v4l2-ioctl.c:3463 v4l2_ioctl+0x1ba/0x250 drivers/media/v4l2-core/v4l2-dev.c:366 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2b85c01b19 ...

In the Linux kernel, the following vulnerability has been resolved: netlabel: Fix NULL pointer exception caused by CALIPSO on IPv4 sockets When calling netlbl_conn_setattr(), addr->sa_family is used to determine the function behavior. If sk is an IPv4 socket, but the connect function is called with an IPv6 address, the function calipso_sock_setattr() is triggered. Inside this function, the following code is executed: sk_fullsock(__sk) ? inet_sk(__sk)->pinet6 : NULL; Since sk is an IPv4 socket, pinet6 is NULL, leading to a null pointer dereference. This patch fixes the issue by checking if inet6_sk(sk) returns a NULL pointer before accessing pinet6.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (drivetemp) Fix driver producing garbage data when SCSI errors occur scsi_execute_cmd() function can return both negative (linux codes) and positive (scsi_cmnd result field) error codes. Currently the driver just passes error codes of scsi_execute_cmd() to hwmon core, which is incorrect because hwmon only checks for negative error codes. This leads to hwmon reporting uninitialized data to userspace in case of SCSI errors (for example if the disk drive was disconnected). This patch checks scsi_execute_cmd() output and returns -EIO if it's error code is positive. [groeck: Avoid inline variable declaration for portability]

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Mask the bd_cnt field in the TX BD properly The bd_cnt field in the TX BD specifies the total number of BDs for the TX packet. The bd_cnt field has 5 bits and the maximum number supported is 32 with the value 0. CONFIG_MAX_SKB_FRAGS can be modified and the total number of SKB fragments can approach or exceed the maximum supported by the chip. Add a macro to properly mask the bd_cnt field so that the value 32 will be properly masked and set to 0 in the bd_cnd field. Without this patch, the out-of-range bd_cnt value will corrupt the TX BD and may cause TX timeout. The next patch will check for values exceeding 32.

In the Linux kernel, the following vulnerability has been resolved: drm: xlnx: zynqmp_dpsub: Add NULL check in zynqmp_audio_init devm_kasprintf() calls can return null pointers on failure. But some return values were not checked in zynqmp_audio_init(). Add NULL check in zynqmp_audio_init(), avoid referencing null pointers in the subsequent code.

In the Linux kernel, the following vulnerability has been resolved: perf/core: Add RCU read lock protection to perf_iterate_ctx() The perf_iterate_ctx() function performs RCU list traversal but currently lacks RCU read lock protection. This causes lockdep warnings when running perf probe with unshare(1) under CONFIG_PROVE_RCU_LIST=y: WARNING: suspicious RCU usage kernel/events/core.c:8168 RCU-list traversed in non-reader section!! Call Trace: lockdep_rcu_suspicious ? perf_event_addr_filters_apply perf_iterate_ctx perf_event_exec begin_new_exec ? load_elf_phdrs load_elf_binary ? lock_acquire ? find_held_lock ? bprm_execve bprm_execve do_execveat_common.isra.0 __x64_sys_execve do_syscall_64 entry_SYSCALL_64_after_hwframe This protection was previously present but was removed in commit bd2756811766 ("perf: Rewrite core context handling"). Add back the necessary rcu_read_lock()/rcu_read_unlock() pair around perf_iterate_ctx() call in perf_event_exec(). [ mingo: Use scoped_guard() as suggested by Peter ]

In the Linux kernel, the following vulnerability has been resolved: block: mark GFP_NOIO around sysfs ->store() sysfs ->store is called with queue freezed, meantime we have several ->store() callbacks(update_nr_requests, wbt, scheduler) to allocate memory with GFP_KERNEL which may run into direct reclaim code path, then potential deadlock can be caused. Fix the issue by marking NOIO around sysfs ->store()

In the Linux kernel, the following vulnerability has been resolved: powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu' Commit 176cda0619b6 ("powerpc/perf: Add perf interface to expose vpa counters") introduced 'vpa_pmu' to expose Book3s-HV nested APIv2 provided L1<->L2 context switch latency counters to L1 user-space via perf-events. However the newly introduced PMU named 'vpa_pmu' doesn't assign ownership of the PMU to the module 'vpa_pmu'. Consequently the module 'vpa_pmu' can be unloaded while one of the perf-events are still active, which can lead to kernel oops and panic of the form below on a Pseries-LPAR: BUG: Kernel NULL pointer dereference on read at 0x00000058 <snip> NIP [c000000000506cb8] event_sched_out+0x40/0x258 LR [c00000000050e8a4] __perf_remove_from_context+0x7c/0x2b0 Call Trace: [c00000025fc3fc30] [c00000025f8457a8] 0xc00000025f8457a8 (unreliable) [c00000025fc3fc80] [fffffffffffffee0] 0xfffffffffffffee0 [c00000025fc3fcd0] [c000000000501e70] event_function+0xa8/0x120 <snip> Kernel panic - not syncing: Aiee, killing interrupt handler! Fix this by adding the module ownership to 'vpa_pmu' so that the module 'vpa_pmu' is ref-counted and prevented from being unloaded when perf-events are initialized.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Don't override subprog's return value The verifier test `calls: div by 0 in subprog` triggers a panic at the ld.bu instruction. The ld.bu insn is trying to load byte from memory address returned by the subprog. The subprog actually set the correct address at the a5 register (dedicated register for BPF return values). But at commit 73c359d1d356 ("LoongArch: BPF: Sign-extend return values") we also sign extended a5 to the a0 register (return value in LoongArch). For function call insn, we later propagate the a0 register back to a5 register. This is right for native calls but wrong for bpf2bpf calls which expect zero-extended return value in a5 register. So only move a0 to a5 for native calls (i.e. non-BPF_PSEUDO_CALL).

In the Linux kernel, the following vulnerability has been resolved: net: better track kernel sockets lifetime While kernel sockets are dismantled during pernet_operations->exit(), their freeing can be delayed by any tx packets still held in qdisc or device queues, due to skb_set_owner_w() prior calls. This then trigger the following warning from ref_tracker_dir_exit() [1] To fix this, make sure that kernel sockets own a reference on net->passive. Add sk_net_refcnt_upgrade() helper, used whenever a kernel socket is converted to a refcounted one. [1] [ 136.263918][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at [ 136.263918][ T35] sk_alloc+0x2b3/0x370 [ 136.263918][ T35] inet6_create+0x6ce/0x10f0 [ 136.263918][ T35] __sock_create+0x4c0/0xa30 [ 136.263918][ T35] inet_ctl_sock_create+0xc2/0x250 [ 136.263918][ T35] igmp6_net_init+0x39/0x390 [ 136.263918][ T35] ops_init+0x31e/0x590 [ 136.263918][ T35] setup_net+0x287/0x9e0 [ 136.263918][ T35] copy_net_ns+0x33f/0x570 [ 136.263918][ T35] create_new_namespaces+0x425/0x7b0 [ 136.263918][ T35] unshare_nsproxy_namespaces+0x124/0x180 [ 136.263918][ T35] ksys_unshare+0x57d/0xa70 [ 136.263918][ T35] __x64_sys_unshare+0x38/0x40 [ 136.263918][ T35] do_syscall_64+0xf3/0x230 [ 136.263918][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 136.263918][ T35] [ 136.343488][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at [ 136.343488][ T35] sk_alloc+0x2b3/0x370 [ 136.343488][ T35] inet6_create+0x6ce/0x10f0 [ 136.343488][ T35] __sock_create+0x4c0/0xa30 [ 136.343488][ T35] inet_ctl_sock_create+0xc2/0x250 [ 136.343488][ T35] ndisc_net_init+0xa7/0x2b0 [ 136.343488][ T35] ops_init+0x31e/0x590 [ 136.343488][ T35] setup_net+0x287/0x9e0 [ 136.343488][ T35] copy_net_ns+0x33f/0x570 [ 136.343488][ T35] create_new_namespaces+0x425/0x7b0 [ 136.343488][ T35] unshare_nsproxy_namespaces+0x124/0x180 [ 136.343488][ T35] ksys_unshare+0x57d/0xa70 [ 136.343488][ T35] __x64_sys_unshare+0x38/0x40 [ 136.343488][ T35] do_syscall_64+0xf3/0x230 [ 136.343488][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: Revert "drm/amd/display: Use HW lock mgr for PSR1" This reverts commit a2b5a9956269 ("drm/amd/display: Use HW lock mgr for PSR1") Because it may cause system hang while connect with two edp panel.

In the Linux kernel, the following vulnerability has been resolved: ax25: Fix refcount leak caused by setting SO_BINDTODEVICE sockopt If an AX25 device is bound to a socket by setting the SO_BINDTODEVICE socket option, a refcount leak will occur in ax25_release(). Commit 9fd75b66b8f6 ("ax25: Fix refcount leaks caused by ax25_cb_del()") added decrement of device refcounts in ax25_release(). In order for that to work correctly the refcounts must already be incremented when the device is bound to the socket. An AX25 device can be bound to a socket by either calling ax25_bind() or setting SO_BINDTODEVICE socket option. In both cases the refcounts should be incremented, but in fact it is done only in ax25_bind(). This bug leads to the following issue reported by Syzkaller: ================================================================ refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 1 PID: 5932 at lib/refcount.c:31 refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31 Modules linked in: CPU: 1 UID: 0 PID: 5932 Comm: syz-executor424 Not tainted 6.13.0-rc4-syzkaller-00110-g4099a71718b0 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31 Call Trace: <TASK> __refcount_dec include/linux/refcount.h:336 [inline] refcount_dec include/linux/refcount.h:351 [inline] ref_tracker_free+0x710/0x820 lib/ref_tracker.c:236 netdev_tracker_free include/linux/netdevice.h:4156 [inline] netdev_put include/linux/netdevice.h:4173 [inline] netdev_put include/linux/netdevice.h:4169 [inline] ax25_release+0x33f/0xa10 net/ax25/af_ax25.c:1069 __sock_release+0xb0/0x270 net/socket.c:640 sock_close+0x1c/0x30 net/socket.c:1408 ... do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... </TASK> ================================================================ Fix the implementation of ax25_setsockopt() by adding increment of refcounts for the new device bound, and decrement of refcounts for the old unbound device.

In the Linux kernel, the following vulnerability has been resolved: tcp: correct handling of extreme memory squeeze Testing with iperf3 using the "pasta" protocol splicer has revealed a problem in the way tcp handles window advertising in extreme memory squeeze situations. Under memory pressure, a socket endpoint may temporarily advertise a zero-sized window, but this is not stored as part of the socket data. The reasoning behind this is that it is considered a temporary setting which shouldn't influence any further calculations. However, if we happen to stall at an unfortunate value of the current window size, the algorithm selecting a new value will consistently fail to advertise a non-zero window once we have freed up enough memory. This means that this side's notion of the current window size is different from the one last advertised to the peer, causing the latter to not send any data to resolve the sitution. The problem occurs on the iperf3 server side, and the socket in question is a completely regular socket with the default settings for the fedora40 kernel. We do not use SO_PEEK or SO_RCVBUF on the socket. The following excerpt of a logging session, with own comments added, shows more in detail what is happening: // tcp_v4_rcv(->) // tcp_rcv_established(->) [5201<->39222]: ==== Activating log @ net/ipv4/tcp_input.c/tcp_data_queue()/5257 ==== [5201<->39222]: tcp_data_queue(->) [5201<->39222]: DROPPING skb [265600160..265665640], reason: SKB_DROP_REASON_PROTO_MEM [rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184] [copied_seq 259909392->260034360 (124968), unread 5565800, qlen 85, ofoq 0] [OFO queue: gap: 65480, len: 0] [5201<->39222]: tcp_data_queue(<-) [5201<->39222]: __tcp_transmit_skb(->) [tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160] [5201<->39222]: tcp_select_window(->) [5201<->39222]: (inet_csk(sk)->icsk_ack.pending & ICSK_ACK_NOMEM) ? --> TRUE [tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160] returning 0 [5201<->39222]: tcp_select_window(<-) [5201<->39222]: ADVERTISING WIN 0, ACK_SEQ: 265600160 [5201<->39222]: [__tcp_transmit_skb(<-) [5201<->39222]: tcp_rcv_established(<-) [5201<->39222]: tcp_v4_rcv(<-) // Receive queue is at 85 buffers and we are out of memory. // We drop the incoming buffer, although it is in sequence, and decide // to send an advertisement with a window of zero. // We don't update tp->rcv_wnd and tp->rcv_wup accordingly, which means // we unconditionally shrink the window. [5201<->39222]: tcp_recvmsg_locked(->) [5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160 [5201<->39222]: [new_win = 0, win_now = 131184, 2 * win_now = 262368] [5201<->39222]: [new_win >= (2 * win_now) ? --> time_to_ack = 0] [5201<->39222]: NOT calling tcp_send_ack() [tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160] [5201<->39222]: __tcp_cleanup_rbuf(<-) [rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184] [copied_seq 260040464->260040464 (0), unread 5559696, qlen 85, ofoq 0] returning 6104 bytes [5201<->39222]: tcp_recvmsg_locked(<-) // After each read, the algorithm for calculating the new receive // window in __tcp_cleanup_rbuf() finds it is too small to advertise // or to update tp->rcv_wnd. // Meanwhile, the peer thinks the window is zero, and will not send // any more data to trigger an update from the interrupt mode side. [5201<->39222]: tcp_recvmsg_locked(->) [5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160 [5201<->39222]: [new_win = 262144, win_now = 131184, 2 * win_n ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net_sched: cls_flow: validate TCA_FLOW_RSHIFT attribute syzbot found that TCA_FLOW_RSHIFT attribute was not validated. Right shitfing a 32bit integer is undefined for large shift values. UBSAN: shift-out-of-bounds in net/sched/cls_flow.c:329:23 shift exponent 9445 is too large for 32-bit type 'u32' (aka 'unsigned int') CPU: 1 UID: 0 PID: 54 Comm: kworker/u8:3 Not tainted 6.13.0-rc3-syzkaller-00180-g4f619d518db9 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: ipv6_addrconf addrconf_dad_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_shift_out_of_bounds+0x3c8/0x420 lib/ubsan.c:468 flow_classify+0x24d5/0x25b0 net/sched/cls_flow.c:329 tc_classify include/net/tc_wrapper.h:197 [inline] __tcf_classify net/sched/cls_api.c:1771 [inline] tcf_classify+0x420/0x1160 net/sched/cls_api.c:1867 sfb_classify net/sched/sch_sfb.c:260 [inline] sfb_enqueue+0x3ad/0x18b0 net/sched/sch_sfb.c:318 dev_qdisc_enqueue+0x4b/0x290 net/core/dev.c:3793 __dev_xmit_skb net/core/dev.c:3889 [inline] __dev_queue_xmit+0xf0e/0x3f50 net/core/dev.c:4400 dev_queue_xmit include/linux/netdevice.h:3168 [inline] neigh_hh_output include/net/neighbour.h:523 [inline] neigh_output include/net/neighbour.h:537 [inline] ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:236 iptunnel_xmit+0x55d/0x9b0 net/ipv4/ip_tunnel_core.c:82 udp_tunnel_xmit_skb+0x262/0x3b0 net/ipv4/udp_tunnel_core.c:173 geneve_xmit_skb drivers/net/geneve.c:916 [inline] geneve_xmit+0x21dc/0x2d00 drivers/net/geneve.c:1039 __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x27a/0x7d0 net/core/dev.c:3606 __dev_queue_xmit+0x1b73/0x3f50 net/core/dev.c:4434

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Don't expose hw_counters outside of init net namespace Commit 467f432a521a ("RDMA/core: Split port and device counter sysfs attributes") accidentally almost exposed hw counters to non-init net namespaces. It didn't expose them fully, as an attempt to read any of those counters leads to a crash like this one: [42021.807566] BUG: kernel NULL pointer dereference, address: 0000000000000028 [42021.814463] #PF: supervisor read access in kernel mode [42021.819549] #PF: error_code(0x0000) - not-present page [42021.824636] PGD 0 P4D 0 [42021.827145] Oops: 0000 [#1] SMP PTI [42021.830598] CPU: 82 PID: 2843922 Comm: switchto-defaul Kdump: loaded Tainted: G S W I XXX [42021.841697] Hardware name: XXX [42021.849619] RIP: 0010:hw_stat_device_show+0x1e/0x40 [ib_core] [42021.855362] Code: 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 49 89 d0 4c 8b 5e 20 48 8b 8f b8 04 00 00 48 81 c7 f0 fa ff ff <48> 8b 41 28 48 29 ce 48 83 c6 d0 48 c1 ee 04 69 d6 ab aa aa aa 48 [42021.873931] RSP: 0018:ffff97fe90f03da0 EFLAGS: 00010287 [42021.879108] RAX: ffff9406988a8c60 RBX: ffff940e1072d438 RCX: 0000000000000000 [42021.886169] RDX: ffff94085f1aa000 RSI: ffff93c6cbbdbcb0 RDI: ffff940c7517aef0 [42021.893230] RBP: ffff97fe90f03e70 R08: ffff94085f1aa000 R09: 0000000000000000 [42021.900294] R10: ffff94085f1aa000 R11: ffffffffc0775680 R12: ffffffff87ca2530 [42021.907355] R13: ffff940651602840 R14: ffff93c6cbbdbcb0 R15: ffff94085f1aa000 [42021.914418] FS: 00007fda1a3b9700(0000) GS:ffff94453fb80000(0000) knlGS:0000000000000000 [42021.922423] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [42021.928130] CR2: 0000000000000028 CR3: 00000042dcfb8003 CR4: 00000000003726f0 [42021.935194] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [42021.942257] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [42021.949324] Call Trace: [42021.951756] <TASK> [42021.953842] [<ffffffff86c58674>] ? show_regs+0x64/0x70 [42021.959030] [<ffffffff86c58468>] ? __die+0x78/0xc0 [42021.963874] [<ffffffff86c9ef75>] ? page_fault_oops+0x2b5/0x3b0 [42021.969749] [<ffffffff87674b92>] ? exc_page_fault+0x1a2/0x3c0 [42021.975549] [<ffffffff87801326>] ? asm_exc_page_fault+0x26/0x30 [42021.981517] [<ffffffffc0775680>] ? __pfx_show_hw_stats+0x10/0x10 [ib_core] [42021.988482] [<ffffffffc077564e>] ? hw_stat_device_show+0x1e/0x40 [ib_core] [42021.995438] [<ffffffff86ac7f8e>] dev_attr_show+0x1e/0x50 [42022.000803] [<ffffffff86a3eeb1>] sysfs_kf_seq_show+0x81/0xe0 [42022.006508] [<ffffffff86a11134>] seq_read_iter+0xf4/0x410 [42022.011954] [<ffffffff869f4b2e>] vfs_read+0x16e/0x2f0 [42022.017058] [<ffffffff869f50ee>] ksys_read+0x6e/0xe0 [42022.022073] [<ffffffff8766f1ca>] do_syscall_64+0x6a/0xa0 [42022.027441] [<ffffffff8780013b>] entry_SYSCALL_64_after_hwframe+0x78/0xe2 The problem can be reproduced using the following steps: ip netns add foo ip netns exec foo bash cat /sys/class/infiniband/mlx4_0/hw_counters/* The panic occurs because of casting the device pointer into an ib_device pointer using container_of() in hw_stat_device_show() is wrong and leads to a memory corruption. However the real problem is that hw counters should never been exposed outside of the non-init net namespace. Fix this by saving the index of the corresponding attribute group (it might be 1 or 2 depending on the presence of driver-specific attributes) and zeroing the pointer to hw_counters group for compat devices during the initialization. With this fix applied hw_counters are not available in a non-init net namespace: find /sys/class/infiniband/mlx4_0/ -name hw_counters /sys/class/infiniband/mlx4_0/ports/1/hw_counters /sys/class/infiniband/mlx4_0/ports/2/hw_counters /sys/class/infiniband/mlx4_0/hw_counters ip netns add foo ip netns exec foo bash find /sys/class/infiniband/mlx4_0/ -name hw_counters

In the Linux kernel, the following vulnerability has been resolved: USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb() This patch addresses a null-ptr-deref in qt2_process_read_urb() due to an incorrect bounds check in the following: if (newport > serial->num_ports) { dev_err(&port->dev, "%s - port change to invalid port: %i\n", __func__, newport); break; } The condition doesn't account for the valid range of the serial->port buffer, which is from 0 to serial->num_ports - 1. When newport is equal to serial->num_ports, the assignment of "port" in the following code is out-of-bounds and NULL: serial_priv->current_port = newport; port = serial->port[serial_priv->current_port]; The fix checks if newport is greater than or equal to serial->num_ports indicating it is out-of-bounds.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: nuvoton: npcm8xx: Add NULL check in npcm8xx_gpio_fw devm_kasprintf() calls can return null pointers on failure. But the return values were not checked in npcm8xx_gpio_fw(). Add NULL check in npcm8xx_gpio_fw(), to handle kernel NULL pointer dereference error.

In the Linux kernel, the following vulnerability has been resolved: btrfs: set_page_extent_mapped after read_folio in btrfs_cont_expand While trying to get the subpage blocksize tests running, I hit the following panic on generic/476 assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229 kernel BUG at fs/btrfs/subpage.c:229! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 1 PID: 1453 Comm: fsstress Not tainted 6.4.0-rc7+ #12 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20230301gitf80f052277c8-26.fc38 03/01/2023 pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : btrfs_subpage_assert+0xbc/0xf0 lr : btrfs_subpage_assert+0xbc/0xf0 Call trace: btrfs_subpage_assert+0xbc/0xf0 btrfs_subpage_clear_checked+0x38/0xc0 btrfs_page_clear_checked+0x48/0x98 btrfs_truncate_block+0x5d0/0x6a8 btrfs_cont_expand+0x5c/0x528 btrfs_write_check.isra.0+0xf8/0x150 btrfs_buffered_write+0xb4/0x760 btrfs_do_write_iter+0x2f8/0x4b0 btrfs_file_write_iter+0x1c/0x30 do_iter_readv_writev+0xc8/0x158 do_iter_write+0x9c/0x210 vfs_iter_write+0x24/0x40 iter_file_splice_write+0x224/0x390 direct_splice_actor+0x38/0x68 splice_direct_to_actor+0x12c/0x260 do_splice_direct+0x90/0xe8 generic_copy_file_range+0x50/0x90 vfs_copy_file_range+0x29c/0x470 __arm64_sys_copy_file_range+0xcc/0x498 invoke_syscall.constprop.0+0x80/0xd8 do_el0_svc+0x6c/0x168 el0_svc+0x50/0x1b0 el0t_64_sync_handler+0x114/0x120 el0t_64_sync+0x194/0x198 This happens because during btrfs_cont_expand we'll get a page, set it as mapped, and if it's not Uptodate we'll read it. However between the read and re-locking the page we could have called release_folio() on the page, but left the page in the file mapping. release_folio() can clear the page private, and thus further down we blow up when we go to modify the subpage bits. Fix this by putting the set_page_extent_mapped() after the read. This is safe because read_folio() will call set_page_extent_mapped() before it does the read, and then if we clear page private but leave it on the mapping we're completely safe re-setting set_page_extent_mapped(). With this patch I can now run generic/476 without panicing.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt The commit 4af1b64f80fb ("octeontx2-pf: Fix lmtst ID used in aura free") uses the get/put_cpu() to protect the usage of percpu pointer in ->aura_freeptr() callback, but it also unnecessarily disable the preemption for the blockable memory allocation. The commit 87b93b678e95 ("octeontx2-pf: Avoid use of GFP_KERNEL in atomic context") tried to fix these sleep inside atomic warnings. But it only fix the one for the non-rt kernel. For the rt kernel, we still get the similar warnings like below. BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by swapper/0/1: #0: ffff800009fc5fe8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30 #1: ffff000100c276c0 (&mbox->lock){+.+.}-{3:3}, at: otx2_init_hw_resources+0x8c/0x3a4 #2: ffffffbfef6537e0 (&cpu_rcache->lock){+.+.}-{2:2}, at: alloc_iova_fast+0x1ac/0x2ac Preemption disabled at: [<ffff800008b1908c>] otx2_rq_aura_pool_init+0x14c/0x284 CPU: 20 PID: 1 Comm: swapper/0 Tainted: G W 6.2.0-rc3-rt1-yocto-preempt-rt #1 Hardware name: Marvell OcteonTX CN96XX board (DT) Call trace: dump_backtrace.part.0+0xe8/0xf4 show_stack+0x20/0x30 dump_stack_lvl+0x9c/0xd8 dump_stack+0x18/0x34 __might_resched+0x188/0x224 rt_spin_lock+0x64/0x110 alloc_iova_fast+0x1ac/0x2ac iommu_dma_alloc_iova+0xd4/0x110 __iommu_dma_map+0x80/0x144 iommu_dma_map_page+0xe8/0x260 dma_map_page_attrs+0xb4/0xc0 __otx2_alloc_rbuf+0x90/0x150 otx2_rq_aura_pool_init+0x1c8/0x284 otx2_init_hw_resources+0xe4/0x3a4 otx2_open+0xf0/0x610 __dev_open+0x104/0x224 __dev_change_flags+0x1e4/0x274 dev_change_flags+0x2c/0x7c ic_open_devs+0x124/0x2f8 ip_auto_config+0x180/0x42c do_one_initcall+0x90/0x4dc do_basic_setup+0x10c/0x14c kernel_init_freeable+0x10c/0x13c kernel_init+0x2c/0x140 ret_from_fork+0x10/0x20 Of course, we can shuffle the get/put_cpu() to only wrap the invocation of ->aura_freeptr() as what commit 87b93b678e95 does. But there are only two ->aura_freeptr() callbacks, otx2_aura_freeptr() and cn10k_aura_freeptr(). There is no usage of perpcu variable in the otx2_aura_freeptr() at all, so the get/put_cpu() seems redundant to it. We can move the get/put_cpu() into the corresponding callback which really has the percpu variable usage and avoid the sprinkling of get/put_cpu() in several places.