Multiple Cisco products are affected by a vulnerability in the processing of DCE/RPC requests that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to leak sensitive information or to restart, resulting in an interruption of packet inspection. This vulnerability is due to an error in buffer handling logic when processing DCE/RPC requests, which can result in a buffer out-of-bounds read. An attacker could exploit this vulnerability by sending a large number of DCE/RPC requests through an established connection that is inspected by Snort 3. A successful exploit could allow the attacker to obtain sensitive information in the Snort 3 data stream.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Winwar Media WordPress Email Marketing Plugin – WP Email Capture.This issue affects WordPress Email Marketing Plugin – WP Email Capture: from n/a through 3.10.

A weakness has been identified in D-Link DIR-605L and DIR-619L 2.06B01/2.13B01. The affected element is an unknown function of the component DHCP Client Information Handler. Executing a manipulation can lead to information disclosure. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

The Skoda Automotive cloud contains a Broken Access Control vulnerability, allowing to obtain nicknames and other user identifiers of Skoda Connect service users by specifying an arbitrary vehicle VIN number.

A vulnerability was detected in Foswiki up to 2.1.10. The affected element is an unknown function of the component Changes/Viewfile/Oops. The manipulation results in information disclosure. It is possible to launch the attack remotely. The exploit is now public and may be used. Upgrading to version 2.1.11 is sufficient to fix this issue. The patch is identified as 31aeecb58b64/d8ed86b10e46. Upgrading the affected component is recommended.

A vulnerability was found in Metasoft 美特软件 MetaCRM up to 6.4.2. It has been rated as problematic. Affected by this issue is some unknown functionality of the file /env.jsp. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An information disclosure vulnerability exists in curl <v8.1.0 when doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously wasused to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the second transfer. The problem exists in the logic for a reused handle when it is (expected to be) changed from a PUT to a POST.

GeoNode is an open source platform that facilitates the creation, sharing, and collaborative use of geospatial data. Prior to versions 2.20.6, 2.19.6, and 2.18.7, anonymous users can obtain sensitive information about GeoNode configurations from the response of the `/geoserver/rest/about/status` Geoserver REST API endpoint. The Geoserver endpoint is secured by default, but the configuration of Geoserver for GeoNode opens a list of REST endpoints to support some of its public-facing services. The vulnerability impacts both GeoNode 3 and GeoNode 4 instances. Geoserver security configuration is provided by `geoserver-geonode-ext`. A patch for 2.20.7 has been released which blocks access to the affected endpoint. The patch has been backported to branches 2.20.6, 2.19.7, 2.19.6, and 2.18.7. All the published artifacts and Docker images have been updated accordingly. A more advanced patch has been applied to the master and development versions, which require some changes to GeoNode code. They will be available with the next 4.1.0 release. The patched configuration only has an effect on new deployments. For existing setups, the patch must be applied manually inside the Geoserver data directory. The patched file must replace the existing `<geoserver_datadir>/security/rest.properties` file.

IBM API Connect 2018.1 through 2018.4.1.6 may inadvertently leak sensitive details about internal servers and network via API swagger. IBM X-force ID: 162947.

A security flaw has been discovered in MineAdmin 1.x/2.x. This affects an unknown function of the component Swagger. The manipulation results in information disclosure. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

The CentralAuth extension for MediaWiki before 1.19.10, 1.2x before 1.21.4, and 1.22.x before 1.22.1 allows remote attackers to obtain usernames via vectors related to writing the names to the DOM of a page.

Rapid7 Nexpose versions prior to 6.6.114 suffer from an information exposure issue whereby, when the user's session has ended due to inactivity, an attacker can use the inspect element browser feature to remove the login panel and view the details available in the last webpage visited by previous user

A vulnerability was identified in birkir prime up to 0.4.0.beta.0. This impacts an unknown function of the file /graphql of the component GraphQL Directive Handler. Such manipulation leads to information exposure through error message. The attack may be performed from remote. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in VeronaLabs WP SMS – Messaging & SMS Notification for WordPress, WooCommerce, GravityForms, etc.This issue affects WP SMS – Messaging & SMS Notification for WordPress, WooCommerce, GravityForms, etc: from n/a through 6.0.4.

The Tutor LMS – eLearning and online course solution plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.9.5. This is due to missing authorization checks in the `ajax_coupon_details()` function, which only validates nonces but does not verify user capabilities. This makes it possible for authenticated attackers, with Subscriber-level access and above, to retrieve sensitive coupon information including coupon codes, discount amounts, usage statistics, and course/bundle applications.

The WP Adminify plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 4.0.7.7 via the /wp-json/adminify/v1/get-addons-list REST API endpoint. The endpoint is registered with permission_callback set to __return_true, allowing unauthenticated attackers to retrieve the complete list of available addons, their installation status, version numbers, and download URLs.

The WPIDE – File Manager & Code Editor plugin for WordPress is vulnerable to Full Path Disclosure in all versions up to, and including, 3.4.9. This is due to the plugin utilizing the PHP-Parser library, which outputs parser rebuild command execution results. This makes it possible for unauthenticated attackers to retrieve the full path of the web application, which can be used to aid other attacks. The information displayed is not useful on its own, and requires another vulnerability to be present for damage to an affected website.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in PeepSo Community by PeepSo.This issue affects Community by PeepSo: from n/a through 6.0.9.0.

NETGEAR R7000 devices before 1.0.11.116 are affected by disclosure of sensitive information.

The LottieFiles – Lottie block for Gutenberg plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.0.0 via the `/wp-json/lottiefiles/v1/settings/` REST API endpoint. This makes it possible for unauthenticated attackers to retrieve the site owner's LottieFiles.com account credentials including their API access token and email address when the 'Share LottieFiles account with other WordPress users' option is enabled.

A vulnerability was identified in funadmin up to 7.1.0-rc4. Affected by this vulnerability is the function getMember of the file app/frontend/view/login/forget.html. Such manipulation leads to information disclosure. The attack may be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

The Spectra Gutenberg Blocks – Website Builder for the Block Editor plugin for WordPress is vulnerable to Information Disclosure in all versions up to, and including, 2.19.17. This is due to the plugin failing to check `post_password_required()` before rendering post excerpts in the `render_excerpt()` function and the `uagb_get_excerpt()` helper function. This makes it possible for unauthenticated attackers to read excerpts of password-protected posts by simply viewing any page that contains a Spectra Post Grid, Post Masonry, Post Carousel, or Post Timeline block.

An exploitable information disclosure vulnerability exists in the KCodes NetUSB.ko kernel module that enables the ReadySHARE Printer functionality of at least two NETGEAR Nighthawk Routers and potentially several other vendors/products. An unauthenticated, remote attacker can craft and send a packet containing an opcode that will trigger the kernel module to return several addresses. One of which can be used to calculate the dynamic base address of the module for further exploitation.

The Broadstreet plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.53.1 via the get_sponsored_meta() AJAX action. This makes it possible for authenticated attackers, with subscriber-level access and above, to extract data from password protected and private business details.

A vulnerability was detected in Das Parking Management System 停车场管理系统 6.2.0. This impacts an unknown function of the file /Operator/Search. The manipulation results in information disclosure. The attack may be performed from remote. The exploit is now public and may be used.

IBM Planning Analytics Cartridge for Cloud Pak for Data 4.0 connects to a CouchDB server. An attacker can exploit an insecure password policy to the CouchDB server and collect sensitive information from the database. IBM X-Force ID: 247905.

A security vulnerability has been detected in YiFang CMS up to 2.0.5. Affected by this vulnerability is the function exportInstallTable of the file app/utils/base/database/Migrate.php. The manipulation leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

This issue was addressed with improved checks. This issue is fixed in macOS Tahoe 26.4. An app may be able to access sensitive user data.

An exploitable information exposure vulnerability exists in the iocheckd service "I/O-Check" functionality of WAGO PFC200 Firmware versions 03.01.07(13) and 03.00.39(12), and WAGO PFC100 Firmware version 03.00.39(12). A specially crafted set of packets can cause an external tool to fail, resulting in uninitialized stack data to be copied to the response packet buffer. An attacker can send unauthenticated packets to trigger this vulnerability.

A vulnerability was found in Provision-ISR SH-4050A-2, SH-4100A-2L(MM), SH-8100A-2L(MM), SH-16200A-2(1U), SH-16200A-5(1U) and NVR5-8200PX up to 20241220. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the file /server.js. The manipulation leads to information disclosure. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

The The Events Calendar plugin for WordPress is vulnerable to Information Exposure in all versions up to, and including, 6.15.2 via the REST endpoint. This makes it possible for unauthenticated attackers to extract information about password-protected vendors or venues.

Rapid7 InsightVM suffers from an information exposure issue whereby, when the user's session has ended due to inactivity, an attacker can use the Inspect Element browser feature to remove the login panel and view the details available in the last webpage visited by previous user

An authorization issue was discovered in the GitLab CE/EE CI badge images endpoint which could result in disclosure of the build status. This vulnerability was addressed in 12.1.2, 12.0.4, and 11.11.6.

IBM QRadar SIEM 7.3.0 through 7.3.3 discloses sensitive information to unauthorized users. The information can be used to mount further attacks on the system. IBM X-Force ID: 166355.

IBM Security Directory Server 6.4.0 stores sensitive information in URLs. This may lead to information disclosure if unauthorized parties have access to the URLs via server logs, referer header or browser history. IBM X-Force ID: 166623.

Versions of the package @nestjs/core before 9.0.5 are vulnerable to Information Exposure via the StreamableFile pipe. Exploiting this vulnerability is possible when the client cancels a request while it is streaming a StreamableFile, the stream wrapped by the StreamableFile will be kept open.

Sangoma Technologies Corporation Switchvox Version 102409 is affected by an information disclosure vulnerability due to an improper access restriction. Users information such as first name, last name, acount id, server uuid, email address, profile image, number, timestamps, etc can be extracted by sending an unauthenticated HTTP GET request to the https://Switchvox-IP/main?cmd=invalid_browser.

IBM Cognos Controller stores sensitive information in URL parameters. This may lead to information disclosure if unauthorized parties have access to the URLs via server logs, referrer header or browser history. IBM X-Force ID: 162659.

wpForo Forum 2.4.14 contains an information disclosure vulnerability that allows unauthenticated users to retrieve private and unapproved forum topics via the global RSS feed endpoint. Attackers request the RSS feed without a forum ID parameter, bypassing the privacy and status WHERE clauses that are only applied when a specific forum ID is present in the query.

A vulnerability was found in Exrick xboot up to 3.3.4. It has been classified as problematic. This affects an unknown part of the component Spring Boot Admin/Spring Actuator. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

An exposure of sensitive information to an unauthorized actor vulnerability [CWE-200] in FortiClientEMS versions 7.0.0 through 7.0.4, 7.0.6 through 7.0.7, in all 6.4 and 6.2 version management interface may allow an unauthenticated attacker to gain information on environment variables such as the EMS installation path.

IBM Cloud App Management 2019.3.0 and 2019.4.0 reveals a stack trace on certain API requests which can allow an attacker further information about the implementation of the offering. IBM X-Force ID: 173311.

The webreport generation feature in the Danfoss AK-EM100 allows an unauthorized actor to generate a web report that discloses sensitive information such as the internal IP address, usernames and internal device values.

The Code Quality Control Tool plugin for WordPress is vulnerable to Sensitive Information Exposure in version 2.1 through publicly exposed log files. This makes it possible for unauthenticated attackers to view potentially sensitive information contained in the exposed log files.

An information-disclosure vulnerability exists in Fortra's GoAnywhere MFT application prior to version 7.7.0 that allows external access to the resources in certain admin root folders.

A vulnerability classified as problematic has been found in D-Link DIR-878 1.03. Affected is an unknown function of the file /dllog.cgi of the component HTTP POST Request Handler. The manipulation leads to information disclosure. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

IBM Security Key Lifecycle Manager 2.6, 2.7, 3.0, and 3.0.1 discloses sensitive information to unauthorized users. The information can be used to mount further attacks on the system. IBM X-Force ID: 165136.

Planning Analytics Cartridge for Cloud Pak for Data 4.0 exposes sensitive information in logs which could lead an attacker to exploit this vulnerability to conduct further attacks. IBM X-Force ID: 247896.

Jetty is a java based web server and servlet engine. Nonstandard cookie parsing in Jetty may allow an attacker to smuggle cookies within other cookies, or otherwise perform unintended behavior by tampering with the cookie parsing mechanism. If Jetty sees a cookie VALUE that starts with `"` (double quote), it will continue to read the cookie string until it sees a closing quote -- even if a semicolon is encountered. So, a cookie header such as: `DISPLAY_LANGUAGE="b; JSESSIONID=1337; c=d"` will be parsed as one cookie, with the name DISPLAY_LANGUAGE and a value of b; JSESSIONID=1337; c=d instead of 3 separate cookies. This has security implications because if, say, JSESSIONID is an HttpOnly cookie, and the DISPLAY_LANGUAGE cookie value is rendered on the page, an attacker can smuggle the JSESSIONID cookie into the DISPLAY_LANGUAGE cookie and thereby exfiltrate it. This is significant when an intermediary is enacting some policy based on cookies, so a smuggled cookie can bypass that policy yet still be seen by the Jetty server or its logging system. This issue has been addressed in versions 9.4.51, 10.0.14, 11.0.14, and 12.0.0.beta0 and users are advised to upgrade. There are no known workarounds for this issue.

The Export All URLs WordPress plugin before 5.1 generates CSV filenames containing posts URLS (including private posts) in a predictable pattern using a random 6-digit number. These files are stored in the publicly accessible wp-content/uploads/ directory. As a result, any unauthenticated user can brute-force the filenames to gain access to sensitive data contained within the exported files.