A malicious BLE device can send a specific order of packet sequence to cause a DoS attack on the victim BLE device

Unexpected Pointer Aliasing in IEEE 802154 Fragment Reassembly in Zephyr. Zephyr versions >= >=2.4.0 contain NULL Pointer Dereference (CWE-476). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-p86r-gc4r-4mq3

A vulnerability was identified in the handling of Bluetooth Low Energy (BLE) fixed channels (such as SMP or ATT). Specifically, an attacker could exploit a flaw that causes the BLE target (i.e., the device under attack) to attempt to disconnect a fixed channel, which is not allowed per the Bluetooth specification. This leads to undefined behavior, including potential assertion failures, crashes, or memory corruption, depending on the BLE stack implementation.

No proper validation of the length of user input in olcp_ind_handler in zephyr/subsys/bluetooth/services/ots/ots_client.c.

No proper validation of the length of user input in olcp_ind_handler in zephyr/subsys/bluetooth/services/ots/ots_client.c.

BT:Classic: Multiple missing buf length checks

BT: Missing length checks of net_buf in rfcomm_handle_data

BT: Unchecked user input in bap_broadcast_assistant

In utf8_trunc in zephyr/lib/utils/utf8.c, last_byte_p can point to one byte before the string pointer if the string is empty.

BT: Classic: SDP OOB access in get_att_search_list

BT: Missing Check in LL_CONNECTION_UPDATE_IND Packet Leads to Division by Zero

An malicious BLE device can crash BLE victim device by sending malformed gatt packet

BT: HCI: adv_ext_report Improper discarding in adv_ext_report

In ascs_cp_rsp_add in /subsys/bluetooth/audio/ascs.c, an unchecked tailroom could lead to a global buffer overflow.

The Zephyr PL011 UART driver (drivers/serial/uart_pl011.c) contains an unbounded software loop in pl011_irq_tx_enable() that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit (PL011_IMSC_TXIM) is set, to work around the controller's level-transition TX-interrupt behavior. When CTS hardware flow control is enabled (devicetree hw-flow-control or runtime UART_CFG_FLOW_CTRL_RTS_CTS) and the wired serial peer de-asserts CTS, the controller stops draining the TX FIFO; pl011_fifo_fill() then returns 0 on every call while the application still has pending data and therefore never disables the TX interrupt. The loop condition never clears, so the thread that called uart_irq_tx_enable() (e.g. h4_send() in the Bluetooth HCI H4 driver) spins indefinitely, hanging the executing context and stalling the transport — a denial of service (CWE-835). An attacker controlling the device attached to the UART's CTS line can trigger the hang by withholding CTS during transmission. Impact is availability only; there is no memory-safety, confidentiality, or integrity consequence. The vulnerable loop was introduced in commit b783bc8448ef (Feb 2025) and shipped in releases v4.1.0 through v4.4.0. The fix breaks out of the loop when CTS is blocking and arms the CTS modem-status interrupt to resume transmission when CTS re-asserts.

Assertion reachable with repeated LL_CONNECTION_PARAM_REQ. Zephyr versions >= v1.14 contain Reachable Assertion (CWE-617). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-46h3-hjcq-2jjr

Lack of proper validation in HCI Host stack initialization can cause a crash of the bluetooth stack

A malicious / defect bluetooth controller can cause a Denial of Service due to unchecked input in le_read_buffer_size_complete.

Unsafe handling in bt_conn_tx_processor causes a use-after-free, resulting in a write-before-zero. The written 4 bytes are attacker-controlled, enabling precise memory corruption.

Zephyr Bluetooth unchecked packet data results in denial of service. Zephyr versions >= v1.14.2, >= v2.2.0 contain Improper Handling of Parameters (CWE-233). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-f6vh-7v4x-8fjp

In the Zephyr project Bluetooth subsystem, certain duplicate and back-to-back packets can cause incorrect behavior, resulting in a denial of service. This issue affects: zephyrproject-rtos zephyr version 2.2.0 and later versions, and version 1.14.0 and later versions.

zephyr-rtos version 1.12.0 contains a NULL base pointer reference vulnerability in sys_ring_buf_put(), sys_ring_buf_get() that can result in CPU Page Fault (error code 0x00000010). This attack appear to be exploitable via a malicious application call the vulnerable kernel APIs (system sys_ring_buf_get() and sys_ring_buf_put).

mcumgr_serial_process_frag() in subsys/mgmt/mcumgr/transport/src/serial_util.c calls net_buf_reset() on the result of smp_packet_alloc() before checking it for NULL. smp_packet_alloc() uses net_buf_alloc(K_NO_WAIT) against the shared MCUmgr packet pool (CONFIG_MCUMGR_TRANSPORT_NETBUF_COUNT, default 4), which returns NULL when the pool is exhausted. In default builds the __ASSERT_NO_MSG in net_buf_reset is a no-op, so net_buf_simple_reset writes through the NULL pointer (buf->len = 0; buf->data = buf->__buf), causing a fault/crash. The fragment data reaches this code from attacker-controlled bytes on the MCUmgr serial/UART/shell-console transports (smp_uart.c, smp_raw_uart.c, smp_shell.c), and a fresh buffer is allocated at the start of essentially every new packet. An attacker on the serial/console link can flood the transport to drive the 4-entry buffer pool to exhaustion and induce the NULL dereference, crashing the device (denial of service). The defect was introduced after the original MCUmgr rework and shipped in Zephyr v4.4.0. The fix moves the NULL check ahead of net_buf_reset.

DOS: Incorrect 802154 Frame Validation for Omitted Source / Dest Addresses. Zephyr versions >= > v2.4.0 contain NULL Pointer Dereference (CWE-476), Attempt to Access Child of a Non-structure Pointer (CWE-588). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-94jg-2p6q-5364

Type Confusion in 802154 ACK Frames Handling. Zephyr versions >= v2.4.0 contain NULL Pointer Dereference (CWE-476). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-27r3-rxch-2hm7

At the most basic level, an invalid pointer can be input that crashes the device, but with more knowledge of the device’s memory layout, further exploitation is possible.

A missing nullptr-check in handle_ra_input can cause a nullptr-deref.

Incorrect Error Handling in Bluetooth HCI core. Zephyr versions >= v1.14.2, >= v2.2.0 contain NULL Pointer Dereference (CWE-476). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-gc66-xfrc-24qr

A null pointer dereference vulnerability exists in Linksys WRT54GL Wireless-G Broadband Router with firmware <= 4.30.18.006. A null pointer dereference in the soap_action function within the upnp binary can be triggered by an unauthenticated attacker via a malicious POST request invoking the AddPortMapping action.

The issue was addressed with improved checks. This issue is fixed in iOS 18.4 and iPadOS 18.4, iPadOS 17.7.6, macOS Sequoia 15.4, macOS Sonoma 14.7.5, macOS Ventura 13.7.5, tvOS 18.4, visionOS 2.4, watchOS 11.4. An attacker on the local network may cause an unexpected app termination.

OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. In versions 2.4.12 and earlier, an unsafe deserialization and validation of printer attributes causes null dereference in the libcups library. This is a remote DoS vulnerability available in local subnet in default configurations. It can cause the cups & cups-browsed to crash, on all the machines in local network who are listening for printers (so by default for all regular linux machines). On systems where the vulnerability CVE-2024-47176 (cups-filters 1.x/cups-browsed 2.x vulnerability) was not fixed, and the firewall on the machine does not reject incoming communication to IPP port, and the machine is set to be available to public internet, attack vector "Network" is possible. The current versions of CUPS and cups-browsed projects have the attack vector "Adjacent" in their default configurations. Version 2.4.13 contains a patch for CVE-2025-58364.

In Modem, there is a possible system crash due to a missing bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY00791311 / MOLY01067019; Issue ID: MSV-2721.

In Modem, there is a possible system crash due to incorrect error handling. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01430930; Issue ID: MSV-4836.

In Modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01661199; Issue ID: MSV-4296.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. Versions prior to 4.9 contain a NULL Pointer Dereference in BLE L2CAP module. The Contiki-NG operating system for IoT devices contains a Bluetooth Low Energy stack. An attacker can inject a packet in this stack, which causes the implementation to dereference a NULL pointer and triggers undefined behavior. More specifically, while processing the L2CAP protocol, the implementation maps an incoming channel ID to its metadata structure. In this structure, state information regarding credits is managed through calls to the function input_l2cap_credit in the module os/net/mac/ble/ble-l2cap.c. Unfortunately, the input_l2cap_credit function does not check that the metadata corresponding to the user-supplied channel ID actually exists, which can lead to the channel variable being set to NULL before a pointer dereferencing operation is performed. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. Users can apply the patch in Contiki-NG pull request #2253 as a workaround until the new package is released.

A NULL Pointer Dereference vulnerability in TP-Link Archer BE400 V1(802.11 modules) allows  an adjacent attacker to cause a denial-of-service (DoS) by triggering a device reboot. This issue affects Archer BE400: xi 1.1.0 Build 20250710 rel.14914.

In ISC DHCP 4.4.0 -> 4.4.3, ISC DHCP 4.1-ESV-R1 -> 4.1-ESV-R16-P1, when the function option_code_hash_lookup() is called from add_option(), it increases the option's refcount field. However, there is not a corresponding call to option_dereference() to decrement the refcount field. The function add_option() is only used in server responses to lease query packets. Each lease query response calls this function for several options, so eventually, the reference counters could overflow and cause the server to abort.

libosdp is an implementation of IEC 60839-11-5 OSDP (Open Supervised Device Protocol) and provides a C library with support for C++, Rust and Python3. At ospd_common.c, on the osdp_reply_name function, any reply id between REPLY_ACK and REPLY_XRD is valid, but names array do not declare all of the range. On a case of an undefined reply id within the range, name will be null (name = names[reply_id - REPLY_ACK];). Null name will casue a crash on next line: if (name[0] == '\0') as null[0] is invalid. As this logic is not limited to a secure connection, attacker may trigger this vulnerability without any prior knowledge. This issue is fixed in 2.4.0.

Windows Mobile Broadband Driver Denial of Service Vulnerability

A NULL pointer dereference in D-Link DIR-860L REVB_FIRMWARE_2.04.B04_ic5b allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

A NULL Pointer Dereference vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on QFX5000 Series and MX Series allows an unauthenticated adjacent attacker to cause a Denial of Service (DoS). On QFX5K Series and MX Series, when the PFE receives a specific VxLAN packet the Layer 2 Address Learning Manager (L2ALM) process will crash leading to an FPC reboot. Continued receipt of this specific packet will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS on QFX5000 Series, MX Series: 20.3 versions prior to 20.3R3-S3; 20.4 versions prior to 20.4R3-S2; 21.2 versions prior to 21.2R2-S1. This issue does not affect Juniper Networks Junos OS: All versions prior to 20.3R1; 21.1 version 21.1R1 and later versions.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a Null-pointer dereferences in sub_41C488(). This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

OFFIS DCMTK's (All versions prior to 3.6.7) has a NULL pointer dereference vulnerability while processing DICOM files, which may result in a denial-of-service condition.

In Bluetooth, there are possible process crashes due to dereferencing a null pointer. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-13Android ID: A-178800552

OpenAirInterface CN5G AMF (oai-cn5g-amf) <= 2.0.0 contains a null dereference in its handling of unsupported NGAP protocol messages which allows an attacker with network-adjacent access to the AMF to carry out denial of service. When a procedure code/presence field tuple is received that is unsupported, OAI indexes into a null function pointer and subsequently dereferences it.

A Null pointer dereference vulnerability in the Mobile Management Entity (MME) in Magma <= 1.8.0 (fixed in v1.9 commit 08472ba98b8321f802e95f5622fa90fec2dea486) allows network-adjacent attackers to crash the MME via an S1AP `Initial UE Message` packet missing an expected `eNB_UE_S1AP_ID` field.

A vulnerability has been identified in OpenPCS 7 V9.1 (All versions < V9.1 SP2 UC05), SIMATIC BATCH V9.1 (All versions < V9.1 SP2 UC05), SIMATIC PCS 7 V9.1 (All versions < V9.1 SP2 UC05), SIMATIC Route Control V9.1 (All versions < V9.1 SP2 UC05), SIMATIC WinCC Runtime Professional V18 (All versions < V18 Update 4), SIMATIC WinCC Runtime Professional V19 (All versions < V19 Update 2), SIMATIC WinCC V7.4 (All versions), SIMATIC WinCC V7.5 (All versions < V7.5 SP2 Update 15), SIMATIC WinCC V8.0 (All versions < V8.0 Update 4). The implementation of the RPC (Remote Procedure call) communication protocol in the affected products do not properly handle certain unorganized RPC messages. An attacker could use this vulnerability to cause a denial of service condition in the RPC server.

A Null pointer dereference vulnerability in the Mobile Management Entity (MME) in Magma <= 1.8.0 (fixed in v1.9 commit 08472ba98b8321f802e95f5622fa90fec2dea486) allows network-adjacent attackers to crash the MME via an S1AP `eNB Configuration Transfer` packet missing its required `Target eNB ID` field.

A Null pointer dereference vulnerability in the Mobile Management Entity (MME) in Magma <= 1.8.0 (fixed in v1.9 commit 08472ba98b8321f802e95f5622fa90fec2dea486) allows network-adjacent attackers to crash the MME via an S1AP `Initial UE Message` packet missing an expected `EUTRAN_CGI` field.

A Null pointer dereference vulnerability in the Mobile Management Entity (MME) in Magma <= 1.8.0 (fixed in v1.9 commit 08472ba98b8321f802e95f5622fa90fec2dea486) allows network-adjacent attackers to crash the MME via an S1AP `Initial UE Message` packet missing an expected `TAI` field.