OS command injection vulnerability exists in network storage servers STEALTHONE D220/D340/D440 provided by Y'S corporation. A user with an administrative privilege who logged in to the web management page of the affected product may execute an arbitrary OS command.

Improper input handling in a modem-management administrative CLI command on TP-Link Archer NX200, NX210, NX500 and NX600 allows crafted input to be executed as part of an operating system command. An authenticated attacker with administrative privileges may execute arbitrary commands on the operating system, impacting the confidentiality, integrity, and availability of the device.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.0.1.2376 build 20230421 and later QuTS hero h5.0.1.2376 build 20230421 and later QuTScloud c5.1.0.2498 and later

A command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow remote attackers who have gained administrator access to execute arbitrary commands. We have already fixed the vulnerability in the following versions: QuFirewall 2.3.3 ( 2023/03/27 ) and later and later

An improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability [CWE-78] in FortiWeb version 7.0.1 and below, 6.4 all versions, version 6.3.18 and below may allow a privileged attacker to execute arbitrary bash commands via crafted cli backup parameters.

Improper input handling in a wireless-control administrative CLI command on TP-Link Archer NX200, NX210, NX500 and NX600 allows crafted input to be executed as part of an operating system command. An authenticated attacker with administrative privileges may execute arbitrary commands on the operating system, impacting the confidentiality, integrity, and availability of the device.

A vulnerability was found in Wavlink WL-WN530H4 20220721. This vulnerability affects the function strcat/snprintf of the file /cgi-bin/internet.cgi. The manipulation results in os command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. Upgrading to version 2026.04.16 is able to resolve this issue. Upgrading the affected component is recommended.

MAHO-PBX NetDevancer Lite/Uni/Pro/Cloud prior to Ver.1.11.00, MAHO-PBX NetDevancer VSG Lite/Uni prior to Ver.1.11.00, and MAHO-PBX NetDevancer MobileGate Home/Office prior to Ver.1.11.00 allow a remote authenticated attacker with an administrative privilege to execute an arbitrary OS command.

InHand Networks InRouter 302, prior to version IR302 V3.5.56, and InRouter 615, prior to version InRouter6XX-S-V2.3.0.r5542, contain vulnerability CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection'). An unauthorized user with privileged access to the local web interface or the cloud account managing the affected devices could push a specially crafted configuration update file to gain root access. This could lead to remote code execution with root privileges.

An OS command injection vulnerability exists in the ys_thirdparty check_system_user functionality of Milesight UR32L v32.3.0.5. A specially crafted set of network packets can lead to command execution. An attacker can send a network request to trigger this vulnerability.

An os command injection vulnerability exists in the libzebra.so change_hostname functionality of Milesight UR32L v32.3.0.5. A specially-crafted network packets can lead to command execution. An attacker can send a sequence of requests to trigger this vulnerability.

The restricted shell interface in UCOPIA Wireless Appliance before 5.1.8 allows remote authenticated users to gain 'admin' privileges via shell metacharacters in the less command.

A Command Injection vulnerability in httpd web server (setup.cgi) in SerComm h500s, FW: lowi-h500s-v3.4.22 allows logged in administrators to arbitrary OS commands as root in the device via the connection_type parameter of the statussupport_diagnostic_tracing.json endpoint.

User provided input is not sanitized in the “Settings > Access Control” configuration interface allowing for arbitrary code execution.

User provided input is not sanitized on the AXIS License Plate Verifier specific “api.cgi” allowing for arbitrary code execution.

GoSecure on behalf of Genetec Inc. has found a flaw that allows for a remote code execution during the installation of ACAP applications on the Axis device. The application handling service in AXIS OS was vulnerable to command injection allowing an attacker to run arbitrary code. Axis has released patched AXIS OS versions for the highlighted flaw. Please refer to the Axis security advisory for more information and solution.

A vulnerability in the Cisco IOx application hosting environment could allow an authenticated, remote attacker to execute arbitrary commands as root on the underlying host operating system. This vulnerability is due to incomplete sanitization of parameters that are passed in for activation of an application. An attacker could exploit this vulnerability by deploying and activating an application in the Cisco IOx application hosting environment with a crafted activation payload file. A successful exploit could allow the attacker to execute arbitrary commands as root on the underlying host operating system.

A vulnerability in the web-based management interface of Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to execute arbitrary code or cause the web-based management process on the device to restart unexpectedly, resulting in a denial of service (DoS) condition. The attacker must have valid administrator credentials. This vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP input to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the web-based management process to restart, resulting in a DoS condition.

Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

An authenticated administrator is allowed to remotely execute arbitrary shell commands via the API. POC http://<IP_ADDRESS>/qstorapi/storageSystemModify?storageSystem=&newName=quantastor&newDescription=;ls${IFS}-al&newLocation=4&newEnclosureLayoutId=5&newDnsServerList=;ls${IFS}-al&externalHostName=&newNTPServerList=;ls${IFS}-al

An authenticated OS command injection vulnerability exists in Netgear routers (tested on the DGN2200B model) firmware versions 1.0.0.36 and prior via the pppoe.cgi endpoint. A remote attacker with valid credentials can execute arbitrary commands via crafted input to the pppoe_username parameter. This flaw allows full compromise of the device and may persist across reboots unless configuration is restored.

An authenticated OS command injection vulnerability exists in Netgear routers (tested on the DGN1000B model firmware versions 1.1.00.24 and 1.1.00.45) via the TimeToLive parameter in the setup.cgi endpoint. The vulnerability arises from improper input neutralization, enabling command injection through crafted POST requests. This flaw enables remote attackers to deploy payloads or manipulate system state post-authentication.

Multiple vulnerabilities in the web management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The attacker would need valid device credentials but does not require administrator privileges to exploit this vulnerability. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device including the underlying operating system which could also affect the availability of the device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands as the root user on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates to address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands as the root user on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates to address these vulnerabilities.

NetModule NSRW web administration interface executes an OS command constructed with unsanitized user input. A successful exploit could allow an authenticated user to execute arbitrary commands with elevated privileges. This issue affects NSRW: from 4.3.0.0 before 4.3.0.119, from 4.4.0.0 before 4.4.0.118, from 4.6.0.0 before 4.6.0.105, from 4.7.0.0 before 4.7.0.103.

An authenticated OS command injection vulnerability exists in various D-Link routers (tested on DIR-615H1 running firmware version 8.04) via the tools_vct.htm endpoint. The web interface fails to sanitize input passed from the ping_ipaddr parameter to the tools_vct.htm diagnostic interface, allowing attackers to inject arbitrary shell commands using backtick encapsulation. With default credentials, an attacker can exploit this blind injection vector to execute arbitrary commands.

A security vulnerability has been detected in Wavlink WL-NU516U1 240425. This vulnerability affects the function sub_4012A0 of the file /cgi-bin/login.cgi. Such manipulation of the argument ipaddr leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Command injection in alerts in CoolerControl/coolercontrold <4.0.0 allows authenticated attackers to execute arbitrary code as root via injected bash commands in alert names

A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker with administrative privileges to inject arbitrary commands into the underlying operating system and execute them using root-level privileges. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious input to a specific field in the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as a user with root-level privileges.

In Flowmon versions prior to 12.5.5, a vulnerability has been identified that allows a user with administrator privileges and access to the management interface to execute additional unintended commands within scripts intended for troubleshooting purposes.

On Barracuda CloudGen WAN Private Edge Gateway devices before 8 webui-sdwan-1089-8.3.1-174141891, an OS command injection vulnerability exists in /ajax/update_certificate - a crafted HTTP request allows an authenticated attacker to execute arbitrary commands. For example, a name field can contain :password and a password field can contain shell metacharacters.

An OScommand injection vulnerability exists in the device network settings functionality of reolink RLC-410W v3.0.0.136_20121102. At [8] the devname variable, that has the value of the name parameter provided through the SetDevName API, is not validated properly. This would lead to an OS command injection.

Rittal CMC PU III Web management Version affected: V3.11.00_2. Version fixed: V3.17.10 is affected by a remote code execution vulnerablity. It is possible to introduce shell code to create a reverse shell in the PU-Hostname field of the TCP/IP Configuration dialog. Web application fails to sanitize user input on Network TCP/IP configuration page. This allows the attacker to inject commands as root on the device which will be executed once the data is received.

An OS command injection vulnerability exists in the device network settings functionality of reolink RLC-410W v3.0.0.136_20121102. At [4] the dns_data->dns1 variable, that has the value of the dns1 parameter provided through the SetLocal API, is not validated properly. This would lead to an OS command injection.

HGiga MailSherlock query function for connection log has a vulnerability of insufficient filtering for user input. An authenticated remote attacker with administrator privilege can exploit this vulnerability to inject and execute arbitrary system commands to perform arbitrary system operation or disrupt service.

A flaw has been found in TOTOLINK X6000R 9.4.0cu.1360_B20241207/9.4.0cu.1498_B20250826. Affected by this issue is the function setLanCfg of the file /usr/sbin/shttpd. Executing a manipulation of the argument Hostname can lead to os command injection. The attack may be launched remotely.

A vulnerability was found in D-Link DIR-825 and DIR-825R 1.0.5/4.5.1. Affected is the function handler_update_system_time of the file libdeuteron_modules.so of the component NTP Service. The manipulation results in os command injection. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

An OS command injection vulnerability has been reported to affect QNAP operating systems. If exploited, the vulnerability possibly allows remote authenticated administrators to execute commands via unspecified vectors. QES is not affected. We have already fixed the vulnerability in the following versions: QTS 5.0.1.2346 build 20230322 and later QTS 4.5.4.2374 build 20230416 and later QuTS hero h5.0.1.2348 build 20230324 and later QuTS hero h4.5.4.2374 build 20230417 and later QuTScloud c5.0.1.2374 and later

Vulnerability in the product Docsis 3.0 UBC1319BA00 Router supported affected version 1319010201r009. The vulnerability allows an attacker with privileges and network access through the ping.cmd component to execute commands on the device.

A Remote Code Execution vulnerability in Claris FileMaker Cloud allowed a user with Admin Console privileges to inject arbitrary operating system commands through unsanitized input in the External ODBC Data Source connection test feature. This issue is fixed in FileMaker Cloud 2.22.0.5.

A remote arbitrary command execution vulnerability was discovered in HPE Aruba Instant (IAP) version(s): 6.4.x.x: 6.4.4.8-4.2.4.18 and below; Aruba Instant 6.5.x.x: 6.5.4.20 and below; Aruba Instant 8.5.x.x: 8.5.0.12 and below; Aruba Instant 8.6.x.x: 8.6.0.11 and below; Aruba Instant 8.7.x.x: 8.7.1.3 and below. Aruba has released patches for Aruba Instant (IAP) that address this security vulnerability.

setSystemCommand on D-Link DCS-930L devices before 2.12 allows a remote attacker to execute code via an OS command in the SystemCommand parameter.

A command injection vulnerability was reported in the Integrated Management Module (IMM) of legacy IBM System x 3550 M3 and IBM System x 3650 M3 servers that could allow the execution of operating system commands over an authenticated SSH or Telnet session.

A remote arbitrary command execution vulnerability was discovered in HPE Aruba Instant (IAP) version(s): Aruba Instant 6.4.x.x: 6.4.4.8-4.2.4.17 and below; Aruba Instant 6.5.x.x: 6.5.4.18 and below; Aruba Instant 8.5.x.x: 8.5.0.11 and below; Aruba Instant 8.6.x.x: 8.6.0.6 and below; Aruba Instant 8.7.x.x: 8.7.1.0 and below. Aruba has released patches for Aruba Instant (IAP) that address this security vulnerability.

A remote arbitrary command execution vulnerability was discovered in HPE Aruba Instant (IAP) version(s): Aruba Instant 6.4.x.x: 6.4.4.8-4.2.4.18 and below; Aruba Instant 6.5.x.x: 6.5.4.20 and below; Aruba Instant 8.5.x.x: 8.5.0.12 and below; Aruba Instant 8.6.x.x: 8.6.0.11 and below; Aruba Instant 8.7.x.x: 8.7.1.3 and below. Aruba has released patches for Aruba Instant (IAP) that address this security vulnerability.

A server side remote code execution vulnerability was found in Foreman project. A authenticated attacker could use Sendmail configuration options to overwrite the defaults and perform command injection. The highest threat from this vulnerability is to confidentiality, integrity and availability of system. Fixed releases are 2.4.1, 2.5.1, 3.0.0.

NEC Corporation Aterm WX1500HP Ver.1.4.2 and earlier and WX3600HP Ver.1.5.3 and earlier allows a attacker to execute arbitrary OS commands via the network.

A vulnerability was reported in Lenovo Smart Camera X3, X5, and C2E that could allow command injection by setting a specially crafted network configuration. This vulnerability is the same as CNVD-2020-68652.