Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.5, LTS2025 release version 8.3.1.0 through 8.3.1.10, LTS2024 release versions 7.13.1.0 through 7.13.1.40, contain an OS command injection vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution.

A vulnerability in a custom binary used in AOS-CX Switches' CLI could allow an authenticated remote attacker with high privileges to perform command injection. Successful exploitation could allow an attacker to execute unauthorized commands.

A vulnerability in the command line interface of AOS-CX Switches could allow an authenticated remote attacker to execute arbitrary commands on the underlying operating system.

A vulnerability has been identified in SINEMA Remote Connect Client (All versions < V3.2 HF1). The system service of affected applications is vulnerable to command injection due to missing server side input sanitation when loading VPN configurations. This could allow an administrative remote attacker running a corresponding SINEMA Remote Connect Server to execute arbitrary code with system privileges on the client system.

AdTran 834-5 HDC17600021F1 (SmartOS 11.1.1.1) devices enable the SSH service by default and have a hidden, undocumented, hard-coded support account whose password is based on the devices MAC address. All of the devices internet interfaces share a similar MAC address that only varies in their final octet. This allows network-adjacent attackers to derive the support user's SSH password by decrementing the final octet of the connected gateway address or via the BSSID. An attacker can then execute arbitrary OS commands with root-level privileges. NOTE: The vendor states that there is no intended functionality allowing an attacker to execute arbitrary OS Commands with root-level privileges. The vendor also states that this issue was fixed in SmartOS 12.5.5.1.

A vulnerability classified as critical has been found in D-Link DIR-818LW up to 20191215. This affects an unknown part of the component System Time Page. The manipulation of the argument NTP Server leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Multiple OS command injection vulnerabilities exist in the adm.cgi sch_reboot() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to a arbitrary code execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.A command injection vulnerability exists in the `restart_week` POST parameter.

A privilege escalation vulnerability was discovered in the web interface or SSH captive command shell interface of XCC that could allow an authenticated XCC user with elevated privileges to perform command injection via a specially crafted request.

OpenClaw versions prior to 2026.2.22 contain an environment variable injection vulnerability in the system.run function that allows attackers to bypass command allowlist restrictions via SHELLOPTS and PS4 environment variables. An attacker who can invoke system.run with request-scoped environment variables can execute arbitrary shell commands outside the intended allowlisted command body through bash xtrace expansion.

A vulnerability was identified in DrayTek Vigor 300B up to 1.5.1.6. This affects the function cgiGetFile of the file /cgi-bin/mainfunction.cgi/uploadlangs of the component Web Management Interface. The manipulation of the argument File leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor confirms that "300B is EoL, and this is an authenticated vulnerability. We don't plan to fix it." This vulnerability only affects products that are no longer supported by the maintainer.

A privilege escalation vulnerability was discovered in an upload processing functionality of XCC that could allow an authenticated XCC user with elevated privileges to perform command injection via specially crafted file uploads.

OpenClaw versions prior to 2026.2.22 contain an authorization bypass vulnerability in allow-always wrapper persistence that allows attackers to bypass approval checks by persisting wrapper-level allowlist entries instead of validating inner executable intent. Remote attackers can approve benign wrapped system.run commands and subsequently execute different payloads without approval, enabling remote code execution on gateway and node-host execution flows.

baserCMS is a website development framework. Prior to version 5.2.3, there is an OS command injection vulnerability in the update functionality. Due to this issue, an authenticated user with administrator privileges in baserCMS can execute arbitrary OS commands on the server with the privileges of the user account running baserCMS. This issue has been patched in version 5.2.3.

xiaoheiFS is a self-hosted financial and operational system for cloud service businesses. In versions up to and including 0.3.15, the standard plugin system allows admins to upload a ZIP file containing a binary and a `manifest.json`. The server trusts the `binaries` field in the manifest and executes the specified file without any validation of its contents or behavior, leading to Remote Code Execution (RCE). Version 0.4.0 fixes the issue.

A security vulnerability has been detected in UTT HiPER 520 1.7.7-160105. This impacts the function sub_44D264 of the file /goform/formPdbUpConfig of the component Web Management Interface. The manipulation of the argument policyNames leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used.

A vulnerability has been identified in SIMATIC Cloud Connect 7 CC712 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions >= V2.0 < V2.1). The web based management of affected devices does not properly validate user input, making it susceptible to command injection. This could allow an authenticated privileged remote attacker to execute arbitrary code with root privileges.

WeGIA is a web manager for charitable institutions. Prior to version 3.6.5, a critical Remote Code Execution (RCE) vulnerability exists in the WeGIA application's database restoration functionality. An attacker with administrative access (which can be obtained via the previously reported Authentication Bypass) can execute arbitrary OS commands on the server by uploading a backup file with a specifically crafted filename. Version 3.6.5 fixes the issue.

FreePBX is an open source IP PBX. From versions 16.0.17.2 to before 16.0.20 and from version 17.0.2.4 to before 17.0.5, a command injection vulnerability exists in FreePBX when using the ElevenLabs Text-to-Speech (TTS) engine in the recordings module. This issue has been patched in versions 16.0.20 and 17.0.5.

Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.5, LTS2025 release version 8.3.1.0 through 8.3.1.20, LTS2024 release versions 7.13.1.0 through 7.13.1.50, contain a command injection vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability to gain root-level access.

MangoOS before 5.2.0 was discovered to contain an authenticated remote code execution (RCE) vulnerability via the Active Process Command feature.

Insecure file operations in HPE Aruba Networking Fabric Composer’s backup functionality could allow authenticated attackers to achieve remote code execution. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system.

Blinko is an AI-powered card note-taking project. Prior to version 1.8.4, the MCP (Model Context Protocol) server creation function allows specifying arbitrary commands and arguments, which are executed when testing the connection. This issue has been patched in version 1.8.4.

An OS command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by injecting malicious input into requests sent to the firmware update route.

Dell PowerProtect Data Domain, versions 8.5 through 8.6 contain a command injection vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution with root privileges.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.58, R7500v2 before 1.0.3.48, R7800 before 1.0.2.68, R8900 before 1.0.5.2, R9000 before 1.0.5.2, RAX120 before 1.0.1.108, and XR700 before 1.0.1.20.

Due to insufficient input parameter validation on the interface, authenticated users of certain HIKSEMI NAS products can execute arbitrary commands on the device by crafting specific messages.

An os command injection vulnerability exists in the adm.cgi set_ledonoff() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

OpenClaw versions prior to 2026.2.22 in macOS node-host system.run contain an allowlist bypass vulnerability that allows remote attackers to execute non-allowlisted commands by exploiting improper parsing of command substitution tokens. Attackers can craft shell payloads with command substitution syntax within double-quoted text to bypass security restrictions and execute arbitrary commands on the system.

OpenProject is an open-source, web-based project management software. For OpenProject version 16.6.1 and below, a registered administrator can execute arbitrary command by configuring sendmail binary path and sending a test email. This issue has been patched in version 16.6.2.

n8n is an open source workflow automation platform. From version 0.187.0 to before 1.120.3, a command injection vulnerability was identified in n8n’s community package installation functionality. The issue allowed authenticated users with administrative permissions to execute arbitrary system commands on the n8n host under specific conditions. This issue has been patched in version 1.120.3.

A security vulnerability has been detected in D-Link DIR-823X 250416. This affects the function sub_4175CC of the file /goform/set_static_route_table. Such manipulation of the argument interface/destip/netmask/gateway/metric leads to os command injection. The attack may be performed from remote. The exploit has been disclosed publicly and may be used.

A command injection vulnerability may be exploited after the admin's authentication in the VPN Connection Service on the Archer BE230 v1.2  and Archer AXE75 v1.0. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability. This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID. This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420 and Archer AXE v1.0 < 1.5.3 Build 20260209 rel. 71108.

A vulnerability, which was classified as critical, has been found in Ruijie RG-UAC up to 20240428. Affected by this issue is some unknown functionality of the file /view/HAconfig/baseConfig/commit.php. The manipulation of the argument peer_ip/local_ip leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-263108. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in D-Link DIR-823X 250416. This affects the function sub_4211C8 of the file /goform/set_filtering. Such manipulation leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

The post-authentication command injection vulnerability in the Zyxel NAS326 firmware versions prior to V5.21(AAZF.13)C0 could allow an authenticated attacker with administrator privileges to execute some operating system (OS) commands on an affected device remotely.

A vulnerability was found in D-Link DCS-931L up to 1.13.0. This affects an unknown part of the file /goform/setSysAdmin. The manipulation of the argument AdminID results in os command injection. The attack can be executed remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A command injection vulnerability may be exploited after the admin's authentication via the configuration backup restoration function of the TP-Link Archer BE230 v1.2. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability. This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID. This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420.

A vulnerability was found in D-Link DIR-615 4.10. This vulnerability affects unknown code of the file adv_routing.php of the component Web Configuration Interface. Performing a manipulation of the argument dest_ip/ submask/ gw results in os command injection. The attack may be initiated remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical has been found in Ruijie RG-UAC up to 20240428. Affected is an unknown function of the file /view/dhcp/dhcpClient/dhcp_client_commit.php. The manipulation of the argument ifName leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-263106 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability may be exploited after the admin's authentication in the cloud communication interface on the TP-Link Archer BE230 v1.2. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability. This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID. This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420.

A command injection vulnerability in the device’s Root CA certificate transfer workflow allows a high-privileged attacker to send crafted HTTP POST requests that result in arbitrary command execution on the underlying Linux OS with root privileges.

A command injection vulnerability may be exploited after the admin's authentication in the VPN server configuration module on TP-Link Archer BE230 v1.2 and Archer AX73 v2. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability. This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID. This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420 and Archer AX73 v2 < 1.3.1 Build 20260430.

A vulnerability was identified in D-Link DIR-600 up to 2.15WWb02. This vulnerability affects unknown code of the file ssdp.cgi. Such manipulation of the argument HTTP_ST/REMOTE_ADDR/REMOTE_PORT/SERVER_ID leads to command injection. The attack may be launched remotely. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.

Dell SmartFabric OS10 Software, versions prior to 10.5.6.12, contains an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution.

A vulnerability was found in D-Link DCS-931L up to 1.13.0. Impacted is the function doSystem of the file /setSystemAdmin. Performing a manipulation of the argument AdminID results in command injection. The attack may be initiated remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A weakness has been identified in D-Link DIR-823X 250416. This vulnerability affects the function sub_420688 of the file /goform/set_qos. Executing a manipulation can lead to os command injection. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability was determined in UTT 进取 521G 3.1.1-190816. The impacted element is the function sub_446B18 of the file /goform/formPdbUpConfig. Executing a manipulation of the argument policyNames can lead to os command injection. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized.